First time developer. Hello World! SB1 help

Hello every one,
This is my first time trying to develop in SB1. I not a programmer, but I have some knowledge about. Can any one help me to do a u201CHello World!u201D type of application for SB1. Just need a first push!!!
Thanks a lot.

This example is in samples provided from SAP to SDK
Sap Business One SDK\Samples\COM UI\ language \ 01. Hello World

Similar Messages

HT4053 I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo

I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
How can I start my iPhone (I already did restart - it didn't help)

Did you activate the phone already?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

First time to build computer - Need help

Hello, I just finished putting my computer together. It was my first time and I think everything went pretty well. I just finished putting Windows XP on it. However, I have a few questions/problems still:
1) Whenever I turn the computer on it still has a screen with Platinum on it saying tab to post | del to enter bios. Is this normal?
2) After that screen goes away, it stops loading and says "Press F1 to continue, DEL to enter SETUP" and I have to make a selection.
3) After I press F1 to continue it says Press<Ctrl+S> or F4 to enter Raid Utility, but I dont have any raid stuff. If i leave it alone, then it enters into XP
4) After XP loads, if I try to goto my computer I get a blue screen. It says MACHINE_CHECK_EXCEPTION on it towards the top. Towards the bottom it says
*** STOP: 0x00000009C (0x00000 and some more numbers). How do I fix this. I don't know if this helps, but I have a 200GB harddrive that was brand new, and whenever I booted with XP CD it said it only saw 131,000+ MB. I said to format anyway, hope that didn't screw me up.
Thanks for the help.

1. It's a normal default setting for the bios screen to show the logo. I personally don't like it, so I turned it off. You can access it in the "Advanced BIOS" page of the bios.
2. Something must be in error to have the system stop booting. The bios only stops on errors. I wouldn't be overly concerned yet though. Default settings on the board make it stop on all errors. It should give you a reason why it's stopping so look at the screen when it stops and tells you to hit F1. That should give you an idea of what needs fixing.
3. Just turn off the RAID function. It's in the "Integrated Peripherals" screen.
4. Could be any number of reasons, checking your memory would be a good first step. As to Windows only seeing it as 131GB, that's probably because you installed with an older version of Windows XP, before SP1. Back then it couldn't see drives bigger then around 139GB. Install SP2 and you shouldn't have a problem. Just make sure that your BIOS sees it as 186GB. That's what 200GB drives usually show up as.
Michael

Ichat - getting started for first time NOT Working ..please help

I opened the Ichat application for th every first time today. When I open the app a box pops up and asks you to enter your user name and password and with which type of account you want to log in with, etc. First, I chose my mobile me account ( I also have a mac.com account and teh same thing I am going to describe happens with it as well for it is not an apple id dependent problem). I do so and click continue. The next screen comes up in the box and it is titled " encrypted ". Then in the box it says you are now ready to use ichat" . At the bottom of the box it says click done to begin using ichat.
Thus, is my problem. There is no "done" option to click on. The only button options to click on are: "learn more" , "go back" or "continue" . If I click "continue" nothing happens and I cannot do anything or begin using ichat. If I like "learn more" nothing happes at all - thus, the same result as clicking "continue". If I click back it will goto the previous screens but nothing changes.
Has anyone experienced this before? It seems strange and odd for an apple software to be so deleterious. How do i fix it so I can use iChat?
Any help is greatly appreciated. Thank you in advance. Jenna

Hi
Welcome to the  Discussions
Unfortunately although very rare some people do find that iChat does this.
Do this first.
Open your Home Folder (Little House icon)
Go to the Preferences Folder within and then find all the com.apple.iChat(xxx).plist items and delete them.
Try iChat again.
You should see several Start Up Screens.
1) A Welcome Screen.
2) A Valid AIM name (Includes options for MobileMe and @mac.com as well as AIM) plus confirming your Name (Your name maybe Prefilled from the Address Book)
3) the Bonjour Enable (or not) screen.
4) The Jabber option (Includes GoogleTalk) This Screen includes options to change Server Names and Ports under the text fields for the Jabber ID.
5) A Video Preview pane. (You can use this to take a Snapshot for your Buddy Pic)
6) a Details of Accounts you have set up screen.
7) the Done Screen.
More on this with Pictures here
If this does not work we may have to get you to Reinstall iChat.
How much work this entails depends how far your OS has been updated above the Install Disk Level.
Could you tell me what OS version the Install Disk is (What came on your Computer when new) ?
And what OS level you are currently using ?
7:23 PM Friday; December 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

but i already try to remember ,,,,,,,,,,,,, that mean my iphone it will not open again

First time macbook pro buyer. HELP!

okay so i'm a first time macbook pro buyer and i was wondering which one would be better for video editing, the one with 2.2Ghz quad-core with 8GB or the one with 2.3Ghz with 4GB?

The 2.3GHz, but get 8GB's of RAM. You can get the RAM cheaper from places like this, than Apple:
http://www.macsales.com/

Need help to read model node input field attribute present in view - first time developer.

Hello Experts,
I am new to CRM Web UI development.
Presently, I am trying to develop a Guided Activity Page having 2 views.
First view has the field Business Partner Number, I have added model Node BuilHeader and the attribute BP_NUMBER while creation of the view.
The Second View consists of 2 fields from the Model Node BuilHeader, namely First Name and Last Name.
The requirement is to enter the BP Number on the first screen then click on the NEXT button from the Guided Activity buttons, on navigating to the Second View, the Names should auto-populate.
I have Created both views and the GP page, the GP navigation is also happening. Initially the fields were showing Not Bound text in value, so I commented the line in GET_I and GET methods to enable the field and remove the Not Bound text. I have created a custom controller with BuilHeader
I have tried doing this but facing the below problems :
1) When I enter the BP number on the first view and press Enter, the value disappears. How to solve this ?
2) Does clicking on the NEXT button on the GP Navigation trigger a Server Roundtrip ?
3) How to read the context node value of BP Number entered on the first view and populate the Name fields on the second view.
Please help.........

you can take reference from from below code as in above case we use BuilHeaderAdvancedSearch search object, to get current entity.
data: query TYPE REF TO cl_crm_bol_dquery_service,.
query ?= me->typed_context->BuilHeaderAdvancedSearch->collection_wrapper->get_current( ).
Do not remove code from getter setter of fields , it will not clear.
Check with http://scn.sap.com/thread/3391203 , for basic understanding of UI.
Regards,
Harish Kumar

First time DSLR owner...help!

I'm planning on buying my first DSLR around the holidays, and I have no idea what to look for in a camera, as I am brand-new to the DSLR scene.
I'm looking for something that I can grow into as I learn more about photography, etc, and preferably be under $750. I am really looking for the best value for the money, and something that takes sharp and detailed pictures of everything...sports, nature, city scenes, family events...
If someone could also give me a brief crash-course in all the terms and things related with these cameras, it would be very much appreciated
The three cameras that I've looked at: (Can someone highlight the main differences between the three for me? Much appreciated!
Canon Rebel T1i- (http://www.bestbuy.com/site/Canon+-+EOS+Digital+Rebel+T1i+15.1-Megapixel+Digital+SLR+Camera+-+Black/...)
Nikon D5000- (http://www.bestbuy.com/site/Nikon+-+12.3-Megapixel+D5000+Digital+SLR+Camera+-+Black/9311755.p?id=121...)
Nikon D3100- (http://www.bestbuy.com/site/Nikon+-+D3100+14.2-Megapixel+Digital+SLR+Camera+-+Black/1222817.p?id=121...)
Thank you for your time!

Hi oliviaaa06,
Thanks for reaching out to us on this! I remember when I
purchased my first SLR, and I can understand that this can be an intimidating
prospect. With Canon or Nikon DSLRs you really can’t go wrong no matter what
model you end up getting, but I can say that I personally feel like Nikon has
the slight upper-hand when it comes to entry level DSLRs.
All three of the models you have listed are very close in
specifications and build quality, and the lens lineup for both Canon and Nikon
are very comprehensive. The Canon T1i and the Nikon D3100 are the pure entry
level DSLRs for Canon and Nikon, while the Nikon D5000 is one step above the
entry level camera that was available from Nikon when it was released (the
Nikon D3000).
If the video capability is important to you I feel like
the T1i and the D3100 have the advantage over the D5000. The T1i has a much
higher resolution LCD that the two Nikon models. The D5000 will have a slightly
better build quality.
The Canon T1i takes the highest resolution images, the
D3100 produces slightly lower resolution, and the D5000 captures the lowest
resolution images out of these three models. With that said when it comes to
the number of pixels a DSLR is capable of more is not always better. The more
pixels you squeeze into a specific sensor area the harder it is to produce a
camera that does well in low-light situations. The D5000 has the advantage if
low-light photography is something you feel like your new DSLR will be used
for.
As far as giving you a crash course in the terms related to DSLR cameras I could do
that here, but I have already done this in my thread “Digital Camera tips part
2” that is floated to the top of this board. I would suggest reading through
all the threads floated at the top of this board to get a better understanding
of DSLRs (and photography in general).
I hope this helps!
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

I try to overcloack for first time...can you help??

Hello Everybody
I bought my system a year ago,and I start it to be more confident on the pc so I ve decided to try to overcloack ....
I used core centre...i reached around 3.2 (from 2.6) and invariably the system crashes.
Can anybody help this poor guy,that knows little about PC`s???
And /or maybe i set up the hardware in a bad way???
I hope somebody will understand my english(I`m Italian) and help....
I thank you all
MS-6728 P4 DDR S478 865PE Neo2-FIS2R Motherboard BIOS Version/Date American Megatrends Inc. V1.5, 08/09/2003
Pentium 4 2.6GHz 800 Processor FPGA (on system info is displayed that i have 2processors...dont know why)
400W PSU for ATX PC Case
512Mb PC2700 184pin DDR DIMM Memory (u reccommend 400 mhz?)cpu-z tells me that frequency is 159.6 mhz and performance mode...disabled)
256MB ATI Radeon 9200DVI DDR Tv Out
2x 120Gb 180GXP 7200rpm ATA 8mb Cache Hard Drive (2ghether on the onboard raid promise)

Overclocking is not an exact science. It depends heavily on many factors including motherboard, RAM, an dthe CPU. Off the bat i can tell you that you probably won't get very far with PC2700. To get even a small OC you need some decent quality PC3200. but then, its only rated at 400Mhz so your not going to get much over 430Mhz on it. If you really want to OC, you need some faster PC3700 (DDR433) or DDR500 (PC4000). Even then, it is difficult to achieve a stable overclock because of the other two factors, how far you can push the CPU and Motherboard. It is essentially a trial and error process. Push the FSB up a couple points and see if it's stable, then back of a bit when the machine crashes. A good tool to use is Memtest86+, which will test your memory for any errors while overclocked. You can download it here.

First time PC build. Please help.

So first off I'm pretty amateur. I have been running Pr elements on an old destop for a while and putting together a few little DSLR projects. Im starting to get a few more serious projects and need to upgrade things. I was tempted to go down the Mac route but have pretty much opted against that. I am planning on getting Production Premium, as I can get student pricing. Going this route I really need a good computer that I can rely on to cut and color quickly. Keep in mind that Im not doing anything really fancy. Mostly simple edits with coloring and other basic effects.
This is what the computer shop recomended based on what I thought I needed. The price came out a little higher than Id like, so any recommendations would be really appreciated. I am really not much of a computer guy so I have no idea if there are any problems with this setup. Is it too much for what I'm doing? What would you do to make it better?
Antec P193 Full Tower
Antec True Power 1200W Power Supply
Intel Core i7 2700K 3.5 GHz (Quad Core Hyperthreaded)
ASUS SKT1155 Intel Z77 Ivy Bridge Motherboard
16GB Kingston HyperX DDR3 1600MHz Ram
Patriot 240 GB Wildfire SSD Hard Drive (OS drive)
Seagate Barracuda SATA/600 3TB Hard Drive (Data Storage)
ASUS Blu-Ray Writer 12X
Internal Card Reader All – in – One
PNY nVidia Quadro 4000 2GB DDR5 256bit Graphics
Windows 7 Ultimate 64bit
3 Year Warranty
$3249.95 CAD
I appreciate anyone who can take the time to answer this question from a beginner.

>Patriot 240 GB Wildfire SSD Hard Drive (OS drive)
I agree with Harm... I have Win7 64bit Pro and CS5 Master Collection and MS Office Pro and "several" other, smaller programs on my boot drive... and only 60gig is used... I do have my work load spread across 3 drives
My 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
>Windows 7 Ultimate 64bit
Unless you are on a "business enterprise network" where you need the advanced features of Ultimate, all you need is Win7 64bit Pro
Even if you are not going to overclock your CPU look into a better cooling aftermarket CPU fan
Be sure you have plenty of "large, quiet" case fans
http://forums.adobe.com/thread/652694 includes a link to the computer I built... outdated now, but still works well for me

HT201303 I need to change my security answers but I cant remember the answers that I gave the first time????HELP ME PLEEEEEEEESE!!!!

I need to change my security answers but I dont know what they were originally!!!!...HELP PLEASE!!!!!!!

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

First time iPhone user. Please help.

I just got my new iPhone 6. It was already charged when I opened it.
Do I have to charge it again or let it run out first?

You should not let your device run out of battery on purpose. Charge it whenever it is convenient. You cannot overcharge it. But letting it drop below 15% on a regular basis will shorten the battery life. If it is charged, then go ahead and use it.
Cheers,
GB

First Time iMac Buyer - Needs Your Help

Questions for anyone who has had a (Fusion Drive) and/or (Intel Iris Pro) GPU.
Your opinions would be greatly appreciated. I am in the process of getting an 21.5 iMac and will upgrade the RAM online to 16 gigs. Price is somewhat of an issue, so the base model is where I’m standing at the moment. I am nothing more than a basic user, web surfing, music, emails, some picture editing and possibly some very light gaming.
In terms of performance what can I expect from opting into the Fusion Drive vs a reg 1TB HD?
Will it be a night and day type of change or will I even notice it at all?
Where will I see these changes in performance with in the operating system?
Is it necessary based on the basic and casual user like myself?
In terms of the Intel Iris Pro GPU, how well does this stand up against other cards?
Will I be able to play basic games, such as Sims 3, Portal 2, Skyrim and the like and still get a decent frame rate?
Thanks for your help.
CJ

Thanks for your reply!
I have never had an SSD so Im not sure what type of change I am in for.I am using a basic 8 year old PC now that is on its last leg.
Anyways, when you say more RAM is upgrading to 16 enough? That is the max limt anyways on the base model. You mentioned video ram, I didnt see that as an option for that model selected.
Would you say that the base GPU is good enough for what I mentioned in my previous post? I might want to test out a few games on it at some point, but my console is where I do my gaming.
Thanks
CJ

First time mac user..plz help...

hi this is my first mac and apple product, i have been using pc's for almost a decade. i was wondering if it was possilbe to change the cursor to the different shape. for example, instead of the black pointing arrow, maybe change it to a quill or pen. Thank you very much and excuse me if i sound too inexperienced.

There are downloads that might let you do this.
At the very least you should be able to resize the standard cursor with the settings meant for those with poor vision.
http://www.apple.com/education/accessibility/technology/scalable_cursor.html

First time developer. Hello World! SB1 help

Similar Messages

Maybe you are looking for