First Time Install Question...
So, I'm using Fusion to run Vista, but I find it's a bit slow, and I'd like to use BootCamp. If I run the BootCamp agent, will it format the OS X partition, or will it remain intact?
Thanks!
I installed VM Fusion on my mini. I only have an 80 GB HD, + 2 GB Ram. I initially made a 15 GB Boot Camp partition. I am using that for my Fusion to run XP. But it is only allocating 512 MG of my 2 GB Ram for Windows. It runs REAL SLOW, much slower than my XP on just Boot Camp. IS there a way of increasing how much RAM is allocated for Windows? How much faster would it run if I had a new iMac?
Similar Messages
-
First-Time install (htmldb 1.6)
Hello,
I'm planning on installing htmldb (v1.6) for the first time on my workstation for testing. I've already got Oracle 10g installed (windows xp, 32bit).
I downloaded the roughly 47mb htmldb 1.6.zip program file, as well as the zipped set of documentation. In reading through the installation guide, the installation procedure basically boils down to running the install script, and then doing some post-install config.
However, in reading other docs on htmldb, such as the installation faq, they seem to reference installing htmldb through the Oracle 10g companion cd. But the installation document that I downloaded with the 1.6 program and the 1.6 documentation set makes no mention of the companion cd.
Is using the companion cd required, or was that the old method of doing the install, and if I am doing a first-time install of the product then I should ignore the companion cd and just follow the installation doc by running the installation script directly in my database?
Thanks, Scot.Scott,
You can just run the install script as you suggest in your second paragraph.
The Companion CD has a couple of other programs on it and I believe it uses the OUI to get the info required then runs the install script for you.
I believe the 1.6 zip file was put up on its own because demand for the new version was so high and it would have been unnecessary to generate a complete new Companion CD just for 1.6.
Good luck.
Greg -
Will not let me log in, first time installing on this computer.
Will not let me log in, first time installing on this computer.
What is the error message you see when it will not let you log in... is it one of the below problems?
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
And, just in case you ever have this problem...
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430 -
Perform a first time install again???
i recently bought a Nokia E63... and set it all up and did the first time install. I found out the charger didn't work so i formatted the E63 and i was going to return the phone. Turns out they just gave me a new charger.
i lost a few applications that came with the phone during the first time use/install period when i first turned on the phone... applications such as games and i cant remember what else. Is there anyway i can get all my applications back and do another first time install?Most of application u can get back from OVI store.
but you wont be getting the Advance call manager full version now.
You have to purchase now as it is available for trial just only for 15 calls.
Applications came with E63:
Advance call manager
Ovi chat
Top hit solitare
Global block
regards
Moderator note: link removed. -
Setting up a cluster for the first time: newbie questions
Any help appreciated with this situation:
I'm trying to set up a cluster for the first time and running into
issues (no big surprise). I'll outline my situation and pose questions
as they arise. If/when I get things to work I'll post a step-by-step
summary of what it took to get a simple cluster going.
Here's what I have:
machines:
1 Windows 2000 machines with WL 6.1
2 RedHat Linux machines with WL 6.1
All machines are on the same Home LAN, can see each other, etc.
IP addresses are:
Windows box: 192.168.1.100
Linux box 1: 192.168.1.102
Linux box 2: 192.168.1.103
servers:
I've set up the Windows machine as my admin server, and set up
a managed server on each Linux machine. I created a cluster that consists
of the 2 Linux machines and deployed the web app and EJB to the cluster.
The Windows machine is acting as a Proxy using ClusterServlet.
The web application has been set as the Default Web Application on the
two Linux machines. All 3 machines are listening on ports 80/443. I also
set up session memory replication through the console.
Application:
I have an application that I package as an EAR file. I'm using it as a
"reference" application designed to mimic a real world app as much as possible.
The EAR file contains a web application that uses Struts. It also consists
of a single Stateless Session Bean. The WAR file and EJB Jar are all
packaged up into the EAR file. I've been able to run this application just
fine on a single managed server on all 3 machines.
The web application works fine, and it can invoke the EJB. I can also
invoke the EJB from Java stand-alone clients. Struts works great. All is
well with the world. Now I'm trying to "cluster-ize" this app using
the environment described above and encountering issues.
I've read the docs and followed the instructions according to the
"Weblogic Bible" book. I can bring up all 3 servers and the Linux
managed servers connect to the cluster just fine. I can also
see the Struts messages in their logs which normally happens and tells me
the webapp is initialized properly. The console tells me that the managed
servers are running. I get no error messages starting up any of the serves.
Here are the problems I am encountering.
When I try to access the Web Application (through a browser on the
Windows machine using http://localhost) I get the following error message:
<Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
x,admin) found no context for "/". This request does not match the context path
for any installed web applications and there is no default web application confi
gured.>
Also, when I try to invoke the EJB through a stand-alone Java client,
I get a JNDI lookup error on the EJB's home interface.
Questions:
Question1: I noticed when setting up the machines that console lets you
define a "Machine" or a "Unix Machine". What's the difference? Should I
define the Linux machines as Unix machines or machines, and what are the
consequences of either choice?
Question2:
I'm not totally clear on how my web.xml should look to set up Struts,
the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
Here is what I had before I tried to cluster and which works fine:
<filter>
<filter-name>MainFilter</filter-name>
<filter-class>com.refapp.servlets.MainFilter</filter-class>
<init-param>
<param-name>myAttribute</param-name>
<param-value>Foo</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MainFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping
<!-- Struts ActionServlet Configuration -->
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>refappstruts</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>mapping</param-name>
<param-value>org.apache.struts.action.RequestActionMapping</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.do</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
(I have set up a "dummy" 0-length file called index.do that triggers
Struts to go into its ActionServlet when first accessing the web site).
Here is how I added ClusterServlet to web.xml:
servlet>
<servlet-name>ClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
<load-on-startup>0</load-on-startup>
<init-param>
<param-name>defaultServers</param-name>
<param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>InitServlet</servlet-name>
<url-pattern>/servlet/InitServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.html</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
Clearly there is a problem with the Default Web application not being
seen/mapped properly. Any chances my URL mappings for the filter servlet,
Struts, and ClusterServlet are stepping on each other?
With respect to the EJB, here is what my weblogic-ejb-jar looks like:
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Hello</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
<stateless-clustering>
<stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
<stateless-bean-load-algorithm>
round-robin
</stateless-bean-load-algorithm>
<stateless-bean-methods-are-idempotent>
true
</stateless-bean-methods-are-idempotent>
</stateless-clustering>
</stateless-session-descriptor>
<jndi-name>Hello.Home</jndi-name>
</weblogic-enterprise-bean>
I run this through ejbc and package everything up into the EAR file.
However, I get a JNDI lookup failure when I try to access the Bean from
a standalone Java client running on the Windows machine.
Here is the jndi.properties file that I am using:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:80
Any ideas what I'm doing wrong here? I can post config.xml also if needed.
Thanks in advance!
Let me try to answer :)....
A1> No need to name diff machines by default weblogic
considers the servers are physically located in diff boxes.
The names are used to differtiate the mang servers which are in
multihomed
Some things to chk
1> Did u targeted the ear file Target as cluster.
2> Can u see on the Admin console that both the man servers
are participated in the cluster( u can see by clicking the monitoring
tab on the Cluster node).
3>Is the URL:PORT for the default web app correct?
the reason: is I dont see the port# on the link u mentioned
4> probably ur ejb might not been deployed on the target thats the
reason u cant access thru java client. If u correct the targets that
will probably fix it.
Hope this helps
Please post the result
Thanks
Sudhir
[email protected] (Chris) wrote in message news:<[email protected]>...
> Any help appreciated with this situation:
> I'm trying to set up a cluster for the first time and running into
> issues (no big surprise). I'll outline my situation and pose questions
> as they arise. If/when I get things to work I'll post a step-by-step
> summary of what it took to get a simple cluster going.
> Here's what I have:
>
> machines:
> 1 Windows 2000 machines with WL 6.1
> 2 RedHat Linux machines with WL 6.1
> All machines are on the same Home LAN, can see each other, etc.
> IP addresses are:
> Windows box: 192.168.1.100
> Linux box 1: 192.168.1.102
> Linux box 2: 192.168.1.103
>
> servers:
> I've set up the Windows machine as my admin server, and set up
> a managed server on each Linux machine. I created a cluster that consists
> of the 2 Linux machines and deployed the web app and EJB to the cluster.
> The Windows machine is acting as a Proxy using ClusterServlet.
> The web application has been set as the Default Web Application on the
> two Linux machines. All 3 machines are listening on ports 80/443. I also
> set up session memory replication through the console.
>
> Application:
> I have an application that I package as an EAR file. I'm using it as a
> "reference" application designed to mimic a real world app as much as possible.
> The EAR file contains a web application that uses Struts. It also consists
> of a single Stateless Session Bean. The WAR file and EJB Jar are all
> packaged up into the EAR file. I've been able to run this application just
> fine on a single managed server on all 3 machines.
> The web application works fine, and it can invoke the EJB. I can also
> invoke the EJB from Java stand-alone clients. Struts works great. All is
> well with the world. Now I'm trying to "cluster-ize" this app using
> the environment described above and encountering issues.
>
> I've read the docs and followed the instructions according to the
> "Weblogic Bible" book. I can bring up all 3 servers and the Linux
> managed servers connect to the cluster just fine. I can also
> see the Struts messages in their logs which normally happens and tells me
> the webapp is initialized properly. The console tells me that the managed
> servers are running. I get no error messages starting up any of the serves.
>
> Here are the problems I am encountering.
>
> When I try to access the Web Application (through a browser on the
> Windows machine using http://localhost) I get the following error message:
>
> <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
> x,admin) found no context for "/". This request does not match the context path
> for any installed web applications and there is no default web application confi
> gured.>
>
> Also, when I try to invoke the EJB through a stand-alone Java client,
> I get a JNDI lookup error on the EJB's home interface.
>
> Questions:
> Question1: I noticed when setting up the machines that console lets you
> define a "Machine" or a "Unix Machine". What's the difference? Should I
> define the Linux machines as Unix machines or machines, and what are the
> consequences of either choice?
>
> Question2:
> I'm not totally clear on how my web.xml should look to set up Struts,
> the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
> Here is what I had before I tried to cluster and which works fine:
>
> <filter>
> <filter-name>MainFilter</filter-name>
> <filter-class>com.refapp.servlets.MainFilter</filter-class>
> <init-param>
> <param-name>myAttribute</param-name>
> <param-value>Foo</param-value>
> </init-param>
> </filter>
>
> <filter-mapping>
> <filter-name>MainFilter</filter-name>
> <url-pattern>/*</url-pattern>
> </filter-mapping
>
>
> <!-- Struts ActionServlet Configuration -->
> <servlet>
> <servlet-name>action</servlet-name>
> <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
>
> <init-param>
> <param-name>application</param-name>
> <param-value>refappstruts</param-value>
> </init-param>
>
> <init-param>
> <param-name>config</param-name>
> <param-value>/WEB-INF/struts-config.xml</param-value>
> </init-param>
>
> <init-param>
> <param-name>debug</param-name>
> <param-value>2</param-value>
> </init-param>
>
> <init-param>
> <param-name>mapping</param-name>
> <param-value>org.apache.struts.action.RequestActionMapping</param-value>
> </init-param>
> <load-on-startup>2</load-on-startup>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <welcome-file-list>
> <welcome-file>index.do</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>index.html</welcome-file>
> </welcome-file-list>
>
> (I have set up a "dummy" 0-length file called index.do that triggers
> Struts to go into its ActionServlet when first accessing the web site).
>
> Here is how I added ClusterServlet to web.xml:
>
> servlet>
> <servlet-name>ClusterServlet</servlet-name>
> <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
> <load-on-startup>0</load-on-startup>
> <init-param>
> <param-name>defaultServers</param-name>
> <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
> </init-param>
> <init-param>
> <param-name>DebugConfigInfo</param-name>
> <param-value>ON</param-value>
> </init-param>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>InitServlet</servlet-name>
> <url-pattern>/servlet/InitServlet</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>/</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.html</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.jsp</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
>
> Clearly there is a problem with the Default Web application not being
> seen/mapped properly. Any chances my URL mappings for the filter servlet,
> Struts, and ClusterServlet are stepping on each other?
>
> With respect to the EJB, here is what my weblogic-ejb-jar looks like:
>
> <weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>Hello</ejb-name>
> <stateless-session-descriptor>
> <pool>
> <max-beans-in-free-pool>100</max-beans-in-free-pool>
> </pool>
> <stateless-clustering>
> <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
> <stateless-bean-load-algorithm>
> round-robin
> </stateless-bean-load-algorithm>
> <stateless-bean-methods-are-idempotent>
> true
> </stateless-bean-methods-are-idempotent>
> </stateless-clustering>
> </stateless-session-descriptor>
> <jndi-name>Hello.Home</jndi-name>
> </weblogic-enterprise-bean>
>
> I run this through ejbc and package everything up into the EAR file.
> However, I get a JNDI lookup failure when I try to access the Bean from
> a standalone Java client running on the Windows machine.
> Here is the jndi.properties file that I am using:
>
> java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
> java.naming.provider.url=t3://localhost:80
>
> Any ideas what I'm doing wrong here? I can post config.xml also if needed.
>
> Thanks in advance!
-
I am quite a way through my first build - quite time consuming but a good learning curve. I have a few questions which I hope you could help me with.
MSI MS-7030 nForce 3 K8N Neo Platinum
AMD 64bit 3000
Corsair (VS1GBKIT400) 1024MB (2 x 512MB Matched Pair), DDR400 / PC3200 non-ECC, Unbuffered, CL2.5
Sapphire 9600XT 256mb
LG 1710 B 17"LCD Monitor (DVI)
Aopen cd-rw 32 x 12 x 48
DVD Player Lite-on 16 x 48
Mitsumi 7-in-1 Floppy Drive / Media Drive
Windows 2000 Pro or Windows 2000 Server
Microsoft PS2 Internet Keyboard
Microsoft Optical mouse
Tablet Wacom Graphire 2
Wireless ADSL Router (wired to desktop) D-Link DSL 604
Bios - The basic building tips mentions going into bios before loading Windows. Have not changed much in my bios except boot order. My Seagate Sata 160gb was detected fine as was everything else except a cd drive where the cable had pulled out on the MOB.
Should I change other settings in the bios before installing Windows or later. And if so which are the key settings to change and how do I work out what to change them to? (I am a bit green on bios) I looked at the link breaking through the bios barrier but other than reading every single item... Not sure where to start.
I also flashed the bios to the latest version - should I have done this? Or waited till later?
Windows I am using quite old versions of Windows 2000 Professional and Windows 2000 Server. In both cases including before flashing the bios the setup of devices phase seems to freeze, the blue bar does not move. If I reboot setup quickly moves to where it left off, moves a bit further then freezes again. If I repeat reboot about 4 or 5 times I eventually get Windows working OK.
But the last time I did this I installed Windows 2000 Server over the top of Windows 2000 Pro. Not sure this was a good idea as the MSI drivers won't load. The install program opens and does not seem to do anything.
I am inclined to format the os area of the drive and install Windows again. One of my colleagues suggested that using Windows XP Professional might resolve the problem of Windows 2000 appearing to hang when installing.
Reference material I have read a couple of Build Your Own books before starting this build but found they were a bit light on detail and out of date. There is a lot of helpful information on the Interet but I think I could do with something which would improve my knowledge. Would the latest edition of Upgrading and Repairing PCs by Scott Mueller be a good choice? How well does it cover bios for example which I understand only superficially or would I be better (poorer financially) buying individual books on different subjects e.g. "Breaking through the Bios barrier" by Adrian Wong.
I don't plan to build PC's on a regular basis but would like to understand more than I do at present.Thanks for all the replies.
I will take the advice on bios and leave well alone at this stage.
Will reformat tonight and install Windows XP and see how it goes.
Couple of immediate questions. On my current PC I have 4 different boots but only really use one. My current PC has Windows 2000 Pro with 2gb, 20 gb for apps and the balance of the 80 gb drive for data. Also an 8gb drive which I hardly ever use.
Current plan on my new PC is to initially use the 160gb SATA as 20 gb combined partition for OS and apps and the balance for data. Or are there really benefits for keeping the operating system separate from apps? Using Partititon Magic fast to set up although currently it is only seeing 132 GB although the bios is correctly reporting 160GB. Presumably this is something I need to adjust in Windows once fully installed.
My 80gb drive has IBM ontrack overlay software. I managed to transfer everything to the new drive using PcAnywhere via the router. Which was great as the first time I have got two machines to talk to each other via the ADSL Router. (This was a great relief as I could not PcAnywhere to work via a serial cable!)
My inital intention was to use the 80GB as the OS / Apps drive but based on the other problems I have had, now decided to build and use the system based on a single 160 SATA drive first then when I am sure it is stable go to plan B with using the 80GB IDE drive as the Windows and Apps drive. I then need to reformat the 80GB drive as it currently has IBM Ontrack overlay software because my previous PC bios could not see 80GB otherwise. Considering at that stage installing Windows 64 bit beta on the 160GB drive.
I don't think I need Raid at this stage although I have a little bit of experience as my SQL Server has two Raid drives (0?) plus a hot swop drive stored in our fire proof safe.
I use AVG free antivirus and have the latest version ready to install.
Regarding firewall - confused as to what is required. Was under the impression that my ADSL Router has a hardware firewall. Also the motherboard has a firewall as well doesn't it? Do I also need a software firewall? There is a free one recommended on the AVG (Grisoft site)
By the way. I was a bit apprehensive when doing the build and took hours over it being very careful to read and follow the steps in motherboard, CPU and case (Antec Sonata) manuals step by step - a very slow process. All the cables in the case looked very intimidating at first.
The whole thing is extremely straightforward and towards the end everything became very logical. All the parts I used seem extremely well designed and easy to use. The only part where I had doubts was pushing down the plastic lever on the AMD retail heat sink. I wondered whether I had understood it correctly and whether it was going to snap. -
First time user questions (managing library, file size defaults, cropping,)
I'm on my first Mac, which I am enjoying and am also using iPhoto '08 for the first time which is a great tool. It has really increased my efficiency in editing a lot of photos at one time. However, the ease of use makes a couple custom things I want to do difficult. I'd appreciate any feedback;
1) I often want to get at my files for upload or transfer to another machine. When I access Photos with my Finder I can only see "Iphoto Library" (or something like that) which does not show the individual files. Very annoying. I have found that i can browse to one of the menus and select "Open Library" and then I can see all the files.
How can I make it default to this expanded setting? When I am uploading pictures via a web application, for instance, the file open tool does not usually give me the option to Open the library. By Default, I would like the library to always be expanded so I do not have to run iPhoto or select "open" to view the files.
Basically, I just want easy manual control of my files in Finder and other applications.
2) Where do I set the jpg size of an edited file? My camera will output 10MB files and after a simple straighten or crop, iPhoto will save them to 1MB files.
Ignoring the debate on file size, is there a way to control the jpg compression so I can stay as close to what came out of the camera as possible?
3) I crop all my photos to 5x7. If I do that once, it comes up the next time. However, once I straighten the photo and then choose crop, it always comes up with some other odd size by default (the largest rectangle that can be fit in the new photos size).
While I know this may be useful for some people, it is time consuming when going through hundreds of photos to constantly have to choose "5x7" from the drop down list. Is there a way to make this the default?
I'm sure I'll have some more questions, but thus far, I've been real happy with iPhoto.
4) The next task will be sharing this Mac Pictures folder on my Wireless network so my XP PC can access it. I'm open to any tips on that one as well....
Thanks!toddjb
Welcome to the Apple Discussions.
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The format of the iPhoto library is this way because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Basically, I just want easy manual control of my files in Finder and other applications.
What's above is what's on offer. Remember, iPhoto is NOT a file organiser, it's a photo organiser. If you want to organise files, then use a file organiser.
Where do I set the jpg size of an edited file
You don't. Though losing 9MB off a 10MB files is excessive. Where are you getting these file sizes.
I crop all my photos to 5x7. If I do that once, it comes up the next time. However, once I straighten the photo and then choose crop, it always comes up with some other odd size by default (the largest rectangle that can be fit in the new photos size).
Straightening also involves cropping. Best to straighten first, then crop.
The next task will be sharing this Mac Pictures folder on my Wireless network so my XP PC can access it.
If you use the hack detailed above be very careful, it's easy to corrupt the iPhoto Library, and making changes to the iPhoto Package File via the Finder or another app is the most popular way to go about it.
Regards
TD -
Unhandled exeception has occurred in your application. On first time instal
I am installing on a server 2003 for the first time. After loading it on the server, I begin to run Installer for my frist instance. After clicking finish on the 'Installation Tasks' screen, it runs until it gets to the 'Installing Webfiles'. This is where I get the error. As I said this is a first time Web Tools 6 install. I have a copy of the error message here:
SAP Business One Web Tools Installer.
Unhandled exeception has occurred in your application. If you click Continue,the application will ignore this error and attempt to
continue. If you click Quit, the application will close immediately.
Some or all identity references could not be translated.
DETAILS:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at System.Security.AccessControl.FileSystemSecurity.AddAccessRule(FileSystemAccessRule rule)
at Installer.Workers.FileWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Installer
Assembly Version: 2007.0.630.10
Win32 Version: 2007.0.630.10
CodeBase: file:///E:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/Installer.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.DirectoryServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.DirectoryServices/2.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
ChilkatDotNet2
Assembly Version: 7.7.2379.17467
Win32 Version: 7, 7, 0, 1
CodeBase: file:///E:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/ChilkatDotNet2.DLL
msvcm80
Assembly Version: 8.0.50727.1433
Win32 Version: 8.00.50727.1433
CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5CF844D2/msvcm80.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Please help, I am at a standstill!!! and can't go any further on the Web Tools Installation.ASPNET is a local Windows user and when IIS executes .Net pages and has to access website files it authenticates to the system as that user. For instance, when you save changes to a theme, such as associating a catalog, you are writing to the files in the /assets/* directory and are doing so as the ASPNET Windows user. This user then needs to have write access to the /assets/* directories for the website to not throw an access denied error.
In IIS if you look at the application pool settings on the identity tab, you will see an option to choose which local user or group will be this designated "IIS user". Typically this is the local group "Network Service" which contains the local user ASPNET.
In the case of the Installer, it is attempting to give the correct permissions to the file directory that contains your website to the ASPNET user. Verify on that server if this user exists by looking at the computer management mmc snap-in then expanding Local Users and Groups and opening the Users folder. -
Sound won't work on first time install (Intel IHC9 chipset)
I have recently installed Arch on my computer for the first time, and I have had no audio. I have tried countless work around with alsa and pulse, but I am have no luck.
lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 60e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 60c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at d9304c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at d9300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d8200000-d92fffff
Prefetchable memory behind bridge: 00000000d3000000-00000000d40fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d7100000-d81fffff
Prefetchable memory behind bridge: 00000000d4100000-00000000d50fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d6100000-d70fffff
Prefetchable memory behind bridge: 00000000d5100000-00000000d60fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 60a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 6080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 6060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 6040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at d9304800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44
I/O ports at 6108 [size=8]
I/O ports at 6114 [size=4]
I/O ports at 6100 [size=8]
I/O ports at 6110 [size=4]
I/O ports at 6020 [size=32]
Memory at d9304000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 1505
Flags: medium devsel, IRQ 18
Memory at d9305000 (64-bit, non-prefetchable) [size=256]
I/O ports at 6000 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 5000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia, nvidiafb
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Hewlett-Packard Company Device 1505
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at 3000 [size=256]
Memory at d8200000 (64-bit, non-prefetchable) [size=4K]
Memory at d3000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d3020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at d7100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
Thank youmblackman wrote:That did help alsa find my video card and set it up, but I feel I might have caused another problem somewhere else in my trouble shooting that I wonder if you might be able to help me out with
Been there, done that.
What is doing now? Can you run amixer and un-mute as suggested by lilsirecho ?
Is your user part of the audio group ?
How have you tried generating audio ? -
FireFox will not work from a first time install
Question
Loaded firefox for the first time, installation complete, icon on desktop, program tries to open when clicked as the hourglass icon is visible for a moment, then nothing happens. I watch the process tree, firefox is visible for a moment then disappears, followed by drwtsn32 momentarily.I called the state's technical support and was informed:
1) That it is a hit or miss possibility for Safari and Firefox to work properly with this site; and,
2) That the site is optimized to operate with Internet Explorer for Windows.
There is your answer. Many US Government sites are the same - they simply WILL NOT follow the necessary web standards to make them Apple and/or Safari compliant.
The only thing you can try is to go to Safari's Develop Menu and try using Internet Explorer as the User Agent. -
First time install probs with sata raid drive using k7n2g ilsr
hi all!!!
this is the first time i have tried 2 use a sata raid hdd. i dont use a raid drive for my c:, the raid drive is just extra space.
first i formated my pc. i installed the raid drivers, then xp. my pc worked fine. but then after a week it was time 2 try plug the drive in.
when i got my k7n2g ilsr motherboard i di not get a manual. so with the raid drivers installed, i just pluged in the raid drive. the drive seemed fine.... i formatted it and put a couple of games on. but after an hours usage the games would crash (high pitched tone instead of the audio, then full freeze).
i have tried putting these games back on my original drive and they work fine......
anyway....
i wanted 2 know if anyone had any ides what i was doing worng??? are there any settings in the bios that need changing when installing a raid drive????
thanks for any help!!!!!!!ok still formatting drive..... looking over the files on the msi site for my motherboard it has 2 files available for raid drives:
the 'Promise Serial-ATA RAID Drivers' ( which i have installed)
and the 'Promise Serial-ATA RAID Utility' (which i dont hav installed)
do i need the Promise Serial-ATA RAID utility?? and if so how do i install it?? there are no setup files just dll files like the driver.... is istallation the same as the driver?
again, i thank u for your help!!!!! -
Making a purchase for the first time, security questions are different to what I've set up?
Hello,
My friend has recently gifted me a $10 for my app store. After redeeming it, it says I have $10.00 Credit, which I assume is a good thing. Now, with this money he has sent me, I am trying to buy a Gem Pack in the game 'Clash Of Clans', this costs $9.99.
I click purchase and it tells me "Insufficient Remaining Store Credit" where it also says "Tap Continue to Sign In". After typing my password in, I am led to the account billing settings where I've got the 'none' option selected as I have not put any credit card details which shouldn't be a problem as I'm trying to buy with the money my friend has given me.
I click the 'done' button where it then tells me "confirmation required" where I then click 'buy', but then it comes up with "Verification Required".
Putting in my password once again, it asks me for security questions. Here lies the problem. It usually asks me one question I know, and another that I haven't put in before. Usually "What's your dream job?" comes which I've put the answer to as this is a question I know. But, after it usually asks me either "What was your first pet's name?" which is a question I haven't put before.
I've tried going to appleid.apple.com and changing and resetting my security questions multiple times, even to match the questions that are asked and it gives me the same result.
"You've typed one or more security questions answers wrong".
Please help, this is getting on my nerves. If this persists, I'm afraid I won't be buying from iTunes much.
Cheers,
Jack.After resetting your questions you've tried logging out (tap on your id in Settings > iTunes & App Store) and back into your account on your iPad to see if they then tie up ?
If they don't, and resetting them yourself doesn't make any difference, then you could try contacting Support and see if they can help with what's going on.
Normally when needing to contact support to get the questions reset you need to contact Support in your country : http://support.apple.com/kb/HT5699
You could try the same contact method for your problem - or you could try contacting iTunes Support via this page, but as it's related to security questions they might just point you to the above : http://www.apple.com/support/itunes/contact/ , click on Contact iTunes Store Support on the right-hand side of the page
For the $9.99 purchase and your $10 credit, if you are in the US then you need to add on your state's sales tax to an item's listed price -
First Time install of Desktop Mac and Entourage Tasks are not deleting
Right, this is the fist time I haev installed Blackberry Desktop for Mac and I have a Bold 9700.
I run Entourage 2008 12.2.6
From previous experiences way back when it was first launched, I learned the hard way so I am treading carefully again. Also, I have just ditched Pocketmac too!
Anyway, I have entourage tasks. If I delete a task from the blackberry its fine, it just dissapears from the mac BUT if I elete from the Mac, its still on the blackberry. what am I doing wrong?
any ideas?Did I do something wrong? I havn't received a single reply from this forum?
-
Hi all,
I'm new to ipod and have a few questions i haven't been able to find answers to elswhere.
Firstly, when i sync photos to my ipod i'm left with a ipod photo cache file of nearly 10GB(!). Can i delete this? Is there away of getting photos onto my ipod without this? It takes up way too much space.
Secondly, why can't i see any alum art. I selected view album art in the ipod options menu within itunes? Is album art compatible with imported cd's? I can see it in Real Player and Windows Media Player so i know its there.
Finally, how come when itunes converts videos to my ipod they convert with no sound?
Many thanks in advance for your helpI've already deleted the iphoto cache as it slowed my computer down way too much.
If i unsync my photos i think i should be able to manually update specific folders to add pictures to my ipod without losing existing images. Which begs the question why does itunes/ipod create a cache folder thats ten times the size of the images you're uploading? Seems an awful lot of information to simply automatically update photos onto the ipod. -
If I want to install the NW04 version of the portal, what files do I need to download? Do I need to install a pre-NetWeaver version first, then upgrade?
ThanksHi Eric,
My suggestion is that you start with the SR1 release of NW04. You will find it in the service marketplace. (http://service.sap.com/swdc)
You will have to install the Web AS first and then add the portal (and KMC if you are using it). no need for any other previous versions. After the SR1 install, there is an upgrade to SP 11 you can do after that.
Hope that helps,
John
Maybe you are looking for
-
or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes. iphone 4 SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone
-
FOX on Agg level of a Multiprovider - clarification
Hi, Iam facing a problem with FOX not generating new records. Scenario: There are projectization% foreach WBS and Costelement wise in the source Cube.(ZHR_PROJ) The Target cube(ZOF_R01) has no %s in it initially on opening the layout but only AMOUNTs
-
Regarding Moni issue -Jdbc to Idoc Scenario
Hi Experts , I am working on one of the interface where my sender System is Database System (Oracle) and Receiver System is SAP ECC we are using JDBC as Sender Channel to send Data to PI and Idoc as Receiver Channel which will Post the Idoc to ECC
-
Client Create and copying default profiles
Hi, This is Sanjeev.. I have created a new client(678) in IDES ECC6 and now i went inside the new client(678) with sap* user and tried to copy default profile sap_all from 001 client using local client copy. It results in error saying rfc source dest
-
SSL Certificate common name (host name field) is incorrect
When user open the Microsoft Office Project and connect to their PWA site, they will get the message "SSL Certificate common name (host name field) is incorrect". Which area that I look start looking at? The client computer or the server itself? The