First-time log in problem from Windows SRV 2003

I just installed a new 10.4.10 server running OD and DNS. Its the OD Master and the dns lookups appear to be working fine. My issue is I have the OD password policy set to change password on first log in, it works fine from a mac but not from Win2003 server. If i log in from any mac first and change the password I can log in fine from the Win2003 box. Any suggestions?

Hi,
That happens because of browser settings only. To remove the Windows Save password option, go to the option in browser
Tools -> Internet options -> Content -> AutoComplete -> Uncheck "Prompt me to save passwords". Then this will not prompt for saving password. If u want to remove previous passwords saved, u can click 'clear password'.
Regards,
Vijai

Similar Messages

First time logging in to iTunes and it keeps telling me to make sure my computer accepts cookies from i

First time logging onto iTunes it keeps telling me to make sure my computer accepts cookies from iTunes. I have set my computer to accept all cookies and it stil wont let me log on at the iTune store

Hi there,
You may want to take a look at some of the troubleshooting steps in the article below.
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/ht1527
Hope that helps,
Griff W.

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!

Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David

When I start ver 4 the first time 10 to 15 blank windows open and does not remember pin tabs?

When I open version 4 the first time, 10 to 15 blank windows open up. it does not remember any pinned tabs or go to my home page.

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
Another possibility is that there is a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

How to get the current logged in username from windows and put it into an AS var

Hello,
I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
Thanks in advance
Michael

Just for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
In the html page that publishes with the .swf file under the <head> section:-
<script language="JavaScript" type="text/javascript">
function findUserName() {
     var wshell=new ActiveXObject ("wscript.shell");
     var username=wshell.ExpandEnvironmentStrings("%username%");
     return username;
</script>
The ActionScript:-
import flash.external.ExternalInterface;
var username:String = ExternalInterface.call ("findUserName");
trace (username); // a quick test to see it in output

First Time Log in by BPEL Console

Dear All,
I have installed BPEL Process Manager 10.1.3.1 and also I have jDeveloper studio 10.1.3.
I start BPEL PM Server and then Open BPEL Console but I can not log in with default user name, i.e "oc4jadmin" or "bpeladmin". Which user name and password should I use for first time log in?
Best Regards,
Farzad

http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28980/bpel_install.htm#BABJAACF

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

Error "The serial number is not valid for this product" | Creative Suite

Its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

HI, its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

iPhones, iPads, iPods are dispatched from China. Apple accessories are dispatched from Singapore. The carrier is FedEx.
Online purchases could be delivered to office addresses or home addresses. Track your item through the email sent by Apple. If necessary, you could change the delivery address to your office one.

HT1918 First time trying to buy from iTunes and I received a message that my payment was declined. I was using the MasterCard method. Help

First time trying to buy from iTunes and I received a message that my payment was declined. I was using the MasterCard method. Help

Is this a debit card you're trying to use? If so, those are apparently no longer accepted by the iTunes Store. You need to use a true credit card. If you are using a credit card, make sure all your billing details match your bank statement exactly. If that doesn't help, call your credit card company and ask if they can see any sort of flag on your account that might cause your card to be declined.
Regards.

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Planning to move my datafile from windows server 2003 to windows XP

planning to move my datafiles from windows server 2003 to windows XP
database 10g
Is it possible to follow below the steps for above migration
=====================================-
This is my steps( migrated from windows Xp to windows XP)
Moving oracle Datafile from one server A to B (instance not running) (cold backup)
In server a (cold backup of datafile)
SQL> alter database backup controlfile to trace
Go to udump check the trace file copy these lines
CREATE CONTROLFILE REUSE DATABASE "O10G1" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 454
LOGFILE
GROUP 1 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO01.LOG' SIZE 10M,
GROUP 2 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO02.LOG' SIZE 10M,
GROUP 3 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSTEM01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\UNDOTBS01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSAUX01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\USERS01.DBF'
CHARACTER SET WE8MSWIN1252
Change the new database name jee and REUSE replaced by SET and NORESTLOGS replaced by RESTLOGS above lines.
Save as C1.sql
Stop the oracle instance service in source ( server A)
Copy all the datafile and redlog file put into server B( any folder)
Copy the init.ora file from source and edit
Change the db_name and location of the controlfile
SERVER B
Create the oracle instance using ORADIM
Start the service
C:\ set oracle_sid=instance name
C:\>set oracle_sid=jeeno1
C:\>sqlplus /nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Apr
11 06:44:28 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount
pfile='C:\oracle\product\10.1.0\admin\jeeno\pfile\jeenoinit.ora'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> CREATE CONTROLFILE set DATABASE "jeeno1"
RESETLOGS NOARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 454
7 LOGFILE
8 GROUP 1
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO01.LOG'
SIZE 10M,
9 GROUP 2
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO02.LOG'
SIZE 10M,
10 GROUP 3
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO03.LOG'
SIZE 10M
11 -- STANDBY LOGFILE
12 DATAFILE
13
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSTEM01.DBF',
14
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\UNDOTBS01.DBF',
15
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSAUX01.DBF',
16
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\USERS01.DBF'
17 CHARACTER SET WE8MSWIN1252
18 ;
Control file created.
SQL> alter database open resetlogs;
Database altered

one more thing u can also rename ur database by using nid utility ,So u have no need to recreate the controlfile for changing the name of ur database.just restore all files from primary to new server ,create new service by oradim ,start the instance and then use NID utility.
Thanks
Kuljeet

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?

Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Windows 8 and IE10 and 11 not accepting Proxy Settings via Group Policy from windows server 2003

Hi
We are still running Windows Server 2003 with a Win7 and Win8 desktop environment. I can control Win7 IE9 settings,
But Win8 systems are running IE10. We have an internal proxy server.
Is there any way to force the proxy settings to the Win8/IE10 or 11 systems .
i have tried with The IE 10 .adm template and applied gpo,but does not have any proxy settings for ie10 and no changes were applies
please can anyone help me regarding this
i want to apply GPO from windows server 2003 to windows 8 ie10/11
Thanks
KNC

Hi,
I agree with Zanderol24, we can install RSAT on a windows8 client, and then we can use Group Policy Management to manage group policy from the client.
For more information about RSAT, we can refer to the following link:
Remote Server Administration Tools (RSAT) for Windows Client and Windows Server (dsforum2wiki)
http://social.technet.microsoft.com/wiki/contents/articles/2202.remote-server-administration-tools-rsat-for-windows-client-and-windows-server-dsforum2wiki.aspx
For more detailed information about how to use GPP to configure the proxy setting for ie10 and ie11, we can refer to the following link:
How to configure Group Policy Preference settings for Internet Explorer 11 in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/2898604
When we use GPPs you need to be aware of the F5-F8 keys:
Red / Green: GP Preferences doesn’t work even though the policy applied and after gpupdate \force
http://blogs.technet.com/b/grouppolicy/archive/2008/10/13/red-green-gp-preferences-doesn-t-work-even-though-the-policy-applied-and-after-gpupdate-force.aspx
Besides, aside from using group policy to manage IE, IEAK can also be used to do this.
For IEAK, the following article can be referred to for more information.
Internet Explorer Administration Kit (IEAK) Information and Downloads
http://technet.microsoft.com/en-in/ie/bb219517.aspx
Best Regards,
Erin

HT2731 Trying to submit credit card receive error or get kicked of or sometimes just locks up in iTunes first times logging in

I'm trying to log in to iTunes for the first time set up apple I'd and confirmed when I try to log in to iTunes it says first time this I'd has been used so I follow the prompts through and when I get to credit card it either locks up at end or kicks me off , sometimes I don't make it that far. I've tried several times

I hadn't had my new MBP two days and it began locking up on me in this exact same way. I'm a "switcher" and this is my first experience with an Apple computer and it is really ******* me off. I had no problems with iTunes on my Dell laptop. For whatever reason my new MBP didn't recognize the cover art I imported with all my music files. I would be attempting to "get cover art" and then my MBP locks up.
Is this an issue I can bring up at the Genius Bar at my local Apple Store? Can I get a new MBP because obviously this one is defective? I so badly wanted to like my first MBP but this is not helping the situation. Any feedback would be very much appreciated. What recourse can I take with Apple? I purchased the ProCare. Does that get me extra help with Apple?
Thanks again.

First-time log in problem from Windows SRV 2003

Similar Messages

Maybe you are looking for