First time post problems on older Multivision PC

Hope you can help!
Found all the posts here really useful stuff, never paid much attention to Powersupply probs before. Trying to keep the old box running, but have ordered new Carrera self spec tower, arriving in about 2 weeks. Asus mobo 3200 Barton 1 gig matched DDR etc.
General probs on system the one described in signature:
* 1700 wont run at 133 FSB, only 100FSB locks up during Windows startup about the time keyboard and mouse draw power.
locks up during large file copying or installation. Problems reinstalling XP CD stops about 80%. Won't complete SP1 installation.
CPU temps
Idle 39=40 Load 44-45 Case temp 37 (taken from BIOS and Fuzzy Logic).
Your stuff on PSU's doesn't mention much about USB devices. really the only additional stuff I have added over time to the original build. About 5 devices including FF Joypad, CF card reader, Wacom graphics tablet, Mouse, webcam.
Would this tip the PSU over the edge??
After initial large crash, tried to repair XP it deleted files but wouldn't install so bought new hardrive for clean install hence system now has 40 and 60 gig. Needed old hdrive for backup of work files (rescue poor backups) installed new CDrom writer incase prob with reading XP disks.
Bios is up to date (Live update confirms)
Via 4 in 1 drivers updated
Ffresh download of S/B live drivers installed
Fresh update of Leadtek graphic drivers.
I don't see much change from original spec, unless PSU on the limit in the first place. Only addition is now extra Hdrive and Lan card. Really want to get this running stable back at 133 FSB so before I investigae the CPU cooling and add extra case fans replace Powersupply etc. Can any one think of anything else to consider?
Thanks for reading hope you can help.

Update and thanks
New carrera arrived singing Barton 3200+ 1gig paired 3200 SATA HD Etc
Old system finally bit the dust, changed everthing to get it going finally picked up a ASUS A7N8X -X for £30 on Ebayn added Barton 2500+ and 512mb 3200 and all is well again.
So the MSI KT266 must have been causing the probs. But thanks to you guys I now understand a little more about power supplies (Antec Truepower installed) and CPU cooling (Vantec Aero 2) keeping the Barton 2500+ at 35 idle and 43 load.
Bought the 3200 stick for some comfort when I begin to investigate the potetial of the Barton 2500+. Currently running at stock only finished building yesterday!!
The ASUS forums aint a patch on the expertise here.
Happy endings
Thanks for the input.

Similar Messages

Hi First time Posting. I can't find Preferences. It is not listed in Finder. Please make it simple, thanks, Carol

Hi, My first time posting. Have been going in circles and need some help. Started with not being able to find my memory stick, didn't show up on desktop. Think I found a way in but the main problem right now is I cannot find Preferences. All posts I have checked say to go to Finder and click on Preferences, but it is not there. Can anyone help. Thanks

You have to click on the word "Finder" in the menu bar. (If you do not see the word click anywhere on the desktop.) When you do that you will see a list of options. In the list, click on Preferences. Another pane will open.
Now click General (on the top row), then select everything by clicking on all the boxes in the section "Show these items on the desktop:"
Close this pane.

First time launch problems - no transition fx - iSight turned itself off

Just got a new 2gHz white MacBook. Migrated my old Home folder from clone of dead Tibook 10.3.9 via iPod. Before opening iMovie HD 6.0.2 for first time, I trashed the old iMovie I believe migrated.
Updated to 10.4.7 released today.
iMovie HD 6.0.2 imediately reported 'There is a problem with the transition effect X' repeatedly. I could Cancel or Okay, but no Fix, so I okayed each and selected Make Magic Movie.
Next I selected iSight (built in), MPEG-4 Widescreen. iSight powered up and I could see myself, but when I continued, iSight powered down, and I gave up.
Thanks in advance for any help. Feel free to email [email protected]

Mike,
Magic Movie is meant for pulling already shot video off a camera and creating a movie.
Perhaps that's your problem.
If you are just going to use your built in iSight, choose iSight as the video format when you create a new project.
Not sure about the other error message. Have you ever installed any third party plugins for iMovie.
Matt
Message was edited by: Matthew Morgan

First time execution problem

Hi All,
I have created a report on Vendors, used the tables LFA1, LFM1, EKKO, EKPO, T024.
When I execute the report for the first time it's taking around 8 Mins., On the other hand, When I execute the same report with the same variant, it's taking around 30 Seconds!
When I check the report in SM50, its showing EKPO sequential read.
Any, Hint to reduce the first time execution time.
Thanks,
Kal Chand

Hi All,
Thanks for your interest,
I am working on the Development&QA server.
This report is similar to standard report "MKVZ",
Adding additional fields...
MARK: I am coping the select statements
Regards,
Kal Chand
START-OF-SELECTION.
SELECT PLIFNR PKTOKK PNAME1 PSTRAS PORT01 PPSTLZ PLAND1 PSORTL QEKORG QVERKF QTELF1 FROM LFA1 AS P INNER JOIN LFM1 AS Q ON QLIFNR = PLIFNR INTO TABLE IT_VEND WHERE PLIFNR IN S_LIFNR AND QEKORG IN S_EKORG AND PSORTL IN S_SORTL AND PKTOKK IN S_KTOKK AND QSPERM NE 'X'.
SELECT DISTINCT PLIFNR PEKORG PEKGRP QWERKS FROM EKKO AS P
INNER JOIN EKPO AS Q ON QEBELN = PEBELN INTO CORRESPONDING FIELDS OF TABLE IT_PURC FOR ALL ENTRIES IN IT_VEND WHERE LIFNR = IT_VEND-LIFNR.
SELECT EKGRP EKNAM FROM T024 INTO TABLE IT_T024 FOR ALL ENTRIES IN IT_PURC WHERE EKGRP = IT_PURC-EKGRP AND EKNAM NE ' '.

First time poster with a Stringy problem (new line "\n" not working...)

Hello,
I am having a bit of troble with making a string appear in multiple lines.
I have the following code:
String scores = ("1st Place "+ highInit1 + " " + highScore1 + " points\n");
scores = scores +"2nd Place "+ highInit2 + " " + highScore2 + " points\n";
With this string I am using swing and the following code:
g.drawString(xxx,xxx,blah.getScores());
When I have been doing this it always displays on a single line. I have tried positioning the "\n" in different places with no luck aswell. Any ideas what is going on here?
Thanks

I would suppose that drawString doesn't honor newline characters to do that. There's nothing magical about a \n character. It's just a character. It is up to the thing rendering it how it is going to treat that character. I would also suppose that's what the xxx, yyy parameters are for - to tell it where to place the text. Looks like you need two separate drawString calls.

First time posting, about the last time I try to fix iTunes before I give up

I'm probably not going to make friends amongst the Apple-o-philes. PC user. deal with it; iPhones were sold to us as platform independent; iTunes is offered as a product that works with Windows. OK. I bought into it; my third iPhone, got one for my girlfriend, got 4,000 songs in iTunes. And I find rather than my Apple product making my life better, faster, quicker, stronger, more efficient, I'm spending hours every month doing things I've done or had to do now a dozen times. Every time there is an update, now I have three computers to update and it totally scrambles my music library with now four copies of every file.
Eventhe Apple boards I see online say "Oh, it will take you a few hours, but it's worth it"
That's not the point - why is it neccessary? Arent computers the kind of thing you'd use to sort through a list of 10,000 anythings and let the processor find the 2,500 you want so a human doesn't have to waste "a few hours"????
That there is now an aftermarket program offered for sale at $20 or more to fix the problems with iTunes libraries should embarass someone imprtant at Apple. It surely makes a good argument why we don't see the "I'm a Mac"/"I'm a PC" ads, because my Mac products (iPhones/iTunes) have cost me a lot of money, and taken a lot of my time.' at this point as much if not more than my 3 PC's. My frustration has brought me to tears, and unfortunately in the wake of the death of Steve Jobs, I'm going to say something that may sound "too soon" or at least sacreligious:
If I have "Manage music manually" checked, why can't I just click-and-drag a song straight from Windows into iTunes.? Onto my iPhone?
I mean it was Macintosh that brought the world the computer mouse, at least how most of us learned to use one is because Mac had it first. Click and drag is something that came first to Mac OS, second to Windows.
Why can I not drag a song, a podcast, a movie, from it's Windows location to iTunes, drop it on my iPhone and find it on the phone? Why do I have to go through this "sync" madness to risk wiping my phone clean in the process (as it did once already)? Why does "manually manage music" do no good, because if I drag a song anywhere onto the iTunes window, i Can't drop it anywhere.
I magange to get a Bachelor's degree from a Big Ten university, in of all things Computer Graphics Design. My experience with iTunes and my iPhone at times make me feel like someone must have dressed me in the morning and fed me liquid food through a straw because surely someone this hapless is too hopeless to chew and swallow on his own.
Next, Apple wants me to pay for the cloud, pay for support by the call, pay $40 for a new cord every time the dog chews one or when it comes apart on it's own (which any cable that costs $40 ought not to do under normal use) -
I feel used by Apple. I used to love my original iPod, right now I feel like a stooge and I'm having confidence issues about life in general because iTunes has broken my spirit, and the money-sink reality of this thing is making me glad the cassette deck in my car still works and my mix tapes just don't disappear like my playlists.
Should I just kill myself? This is almost a serious question - because I go up an ddown these forums and I see hundreds, thousands of questions - spent two hours looking for an answer before I posted this one - I can't find an answer.

I'm probably not going to make friends amongst the Apple-o-philes. PC user. deal with it; iPhones were sold to us as platform independent; iTunes is offered as a product that works with Windows. OK. I bought into it; my third iPhone, got one for my girlfriend, got 4,000 songs in iTunes. And I find rather than my Apple product making my life better, faster, quicker, stronger, more efficient, I'm spending hours every month doing things I've done or had to do now a dozen times. Every time there is an update, now I have three computers to update and it totally scrambles my music library with now four copies of every file.
Eventhe Apple boards I see online say "Oh, it will take you a few hours, but it's worth it"
That's not the point - why is it neccessary? Arent computers the kind of thing you'd use to sort through a list of 10,000 anythings and let the processor find the 2,500 you want so a human doesn't have to waste "a few hours"????
That there is now an aftermarket program offered for sale at $20 or more to fix the problems with iTunes libraries should embarass someone imprtant at Apple. It surely makes a good argument why we don't see the "I'm a Mac"/"I'm a PC" ads, because my Mac products (iPhones/iTunes) have cost me a lot of money, and taken a lot of my time.' at this point as much if not more than my 3 PC's. My frustration has brought me to tears, and unfortunately in the wake of the death of Steve Jobs, I'm going to say something that may sound "too soon" or at least sacreligious:
If I have "Manage music manually" checked, why can't I just click-and-drag a song straight from Windows into iTunes.? Onto my iPhone?
I mean it was Macintosh that brought the world the computer mouse, at least how most of us learned to use one is because Mac had it first. Click and drag is something that came first to Mac OS, second to Windows.
Why can I not drag a song, a podcast, a movie, from it's Windows location to iTunes, drop it on my iPhone and find it on the phone? Why do I have to go through this "sync" madness to risk wiping my phone clean in the process (as it did once already)? Why does "manually manage music" do no good, because if I drag a song anywhere onto the iTunes window, i Can't drop it anywhere.
I magange to get a Bachelor's degree from a Big Ten university, in of all things Computer Graphics Design. My experience with iTunes and my iPhone at times make me feel like someone must have dressed me in the morning and fed me liquid food through a straw because surely someone this hapless is too hopeless to chew and swallow on his own.
Next, Apple wants me to pay for the cloud, pay for support by the call, pay $40 for a new cord every time the dog chews one or when it comes apart on it's own (which any cable that costs $40 ought not to do under normal use) -
I feel used by Apple. I used to love my original iPod, right now I feel like a stooge and I'm having confidence issues about life in general because iTunes has broken my spirit, and the money-sink reality of this thing is making me glad the cassette deck in my car still works and my mix tapes just don't disappear like my playlists.
Should I just kill myself? This is almost a serious question - because I go up an ddown these forums and I see hundreds, thousands of questions - spent two hours looking for an answer before I posted this one - I can't find an answer.

Trouble with the image quality when viewing under 100%. First time posting on the forum.

Hello everyone. I am sorry we have the get acquainted this way but I am having some issues and this is one of my last options of getting help.   Allow me to explain the problem.    When viewing a file under 100% zoom, everything looks jagged like the anti aliasing is missing. Once I zoom in to 100%, everything looks the way it should. The saved file ( jpeg format for instance) is okay. I can zoom out and it still looks true to the image. The problem is related to photoshop. I installed my latest GPU drivers twice just to be sure and it was not from that.   This problem started last night and I don`t quite know how to solve it. If I work on small resolution images, it isn`t such a bad problem because I will be working on 100% zoom, but I am working on high resolution images/ paintings. Somewhere around 8000x5000 pixels thus, working at 100% is not that doable. I attached an image that shows this issue. The one on the right is the zoomed out version and the one on the left is the zoomed in version. Yes, the noise is affected by this, badly, but this started last night. up until then everything looked good even with noise or an out of this world sharpness. I can`t imagine what I could have done to trigger this.
   This being said, I am at the mercy of the more knowledgeable folks from around here. I do hope I posted this question in the right section. This is my first post here so sorry if I messed something up.   Looking forward to your replies.

Here is a simplistic view that I feel may help you understand reality.
The only time you're looking at your image pixels in Photoshop is when you're zoomed in to 100%,   There your look at the actual image pixels Photoshop has for your image at your displays resolution.
At any other zoom level you are looking a scaled image that has more or less pixels than your actual image these too are displayed at your display resolution.
The scaling done by Photoshop is done for displaying your image is done for good performance not for the best image quality a quick interpolation.   Therefore at some zoom levels image quality looks poorer than at other zoom levels.
High resolution Display have now add a new wrinkle.   User interfaces were designed for displays with resolutions around 100 PPI elements like text, icon, and other things like checkboxes, buttons etc. were created so there size would be useable are this more or less fixed 100 PPI resolution.   While Photoshop was designed to scale your images so you can work well on it is was not designed with a scalable UI. Photoshop can not scale its user interface independently from its image display display window for you displays high resolution. Photoshop's Image display area has the same resolution as the rest of Photoshop User Interface. Just like there is only one resolution in all layers in a document. CC 2014 2xUI changes that. PS UI is scaled to 1/2 resolution the image Area is at the displays actual resolution.
Photoshop CC 2014 2x UI scales all of Photoshop User Interface including the image display to 200% which is 1/2 your display resolution effectively cutting you display pixel count to 1/4 its actual pixel count.   Your once again running on a low resolution display.     If your display has a native resolution 200 PPI you're running it at 100 ppi if your display has a 300 PPI resolution you're running it at 150ppi.    Which defeats the reason of having high resolution. Which is you would like to be able to edit your images at print resolution. Adobe cc2x UI scales the UI but not the image window soa inage is 216ppi on the Surface Pro 3 the UI is large and dpoes not fit. screen
To be able to edit your images at print resolution you need a display the has a print resolution and you need and application the can scale its image display and its UI independently.
Current there is no OS interface for having multiple resolutions areas on a display and applications like Photoshop can not scale UI and Image independently. OS and Photoshop can scale what is displayed. Adobe Photoshop executable is coded in a way that it tell Microsoft Windows OS that it will handle display scaling so it can using your displays native resolution. Currently Only Photoshop CC 2014 Provides you with the option of running you display at half resolution.
Windows can scale you display to many resolution and as several presets. like 100%, 125%, 150% and like Adobe 200% half resolution.    You can make a Windows Registry and add an External Photoshop Manifest file the tell's Microsoft Windows to handle display scaling. I have a Microsoft Surface Pro 3 m windows machine. Its LCD has a 216PPI resolution. Windows 8.1 had 4 preset for scaling its LCD.
Surface Pro 3 LCD Display 12" IPS display 3:2 aspect ratio 9.984603532054124" Wide, 6.656402354702749" High 216.3330765278394 PPI
Microsoft Preset Display scaling
100% 2160x1440   216 PPI
125% 1728x1152   173 PPI
150% 1440x960    144 PPI SP3 Default setting
200% 1080x720    108 PPI
Most user these days has 1024x768 or better displays and Web pages are often authored for 800x600 pixels pages. So the give you a better handle on Resolution and scaling I have edit a 800x600 document with 25x25 px grid one my Surface pro 3
using Windows 4 scaling presets and captured the 2160x1140 scaled screens Only at the 100% preset does the image window have a 216ppi Also note @ 2x UI Photoshop UI doe not fit on screen
Adobe Photoshop CC 2014 2xUI Scales the UI to a display 1/2 resolution but does not scale the Image area uses actual screen resolution. Photoshop Help system info show the screen i 1/2 resilution 1080x720 but scalet the imase to the real resolution 2160x1440. however the image window is the 216ppi the ui 108ppi via scaling

Lenovo Essential B490 first Time Booting Problem

Hi,
I have just purchased new Lenovo Essential B490 (59-364701) Laptop (2nd Gen PDC/ 4GB/ 500GB/ DOS) from flipkart. Here is the link of the product - http://www.flipkart.com/lenovo-essential-b490-59-364701-laptop-2nd-gen-pdc-4gb-500gb-dos/p/itmdm5ukv...
When I turn on the laptop it show just dos screen. It asked to input date and then time. Then its showing c:.
Like this.....It dont show any option to go to boot menu so I can install windows. Please help me. thanks in advance.
Solved!
Go to Solution.

hi mkshakya,
Thanks! Okay!
now first make sure the system is OFF
Press the power button and start hitting F2
You will boot to Lenovo BIOS Screen and here are the settings you need to change
First go to the Exit TAB and look for these settings
Either:
OS Optimization or OS Optimized you will Need to change it to Compatible or Other OS.
Next go to Configuration TAB and Security TAB and look for Secure BOOT set it to Disabled.
Last would be to go to Boot Tab and look for these settings.
UEFI boot - Set it to disabled
Boot Model - set it to Legacy
Boot Priority - Set it to Legacy First
Now hit F10 and it should ask you to save and exit just hit Enter for Yes.
After hitting enter your system will restart now quicly start hitting F12 on your keyboard and this will give you an option to Select where to boot, just choose your ODD driver with the Windows CD in it.
(If it did not give you the options restart the system and try hitting F2 again.
Let me know your findings
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

First time build, problems detecting SATA

I just got done putting together my first build, everything went well, until I attempted to boot up, I can get into the bios and the mobo beeps once, but when I'm in the bios there are no SATA detected the bios is set on IDE and toggling between all the settings is not working no dvd, and no hardrives show up. They all have power(i can hear the hard drives spin up and the dvd drive will eject)
I've attempted swapping cables and ports galore, but to no avail.
I'm out of ideas, anyone have any tips?
Also If it helps, I pulled the drives and dvd drive out of my last computer and they were working just fine.
Part list permalink / Part price breakdown by merchant
CPU: Intel Core i7-2600K 3.4GHz Quad-Core Processor ($308.99 @ SuperBiiz)
CPU Cooler: Cooler Master RR-B10-212P-G1 76.8 CFM Sleeve Bearing CPU Cooler ($24.99 @ SuperBiiz)
Motherboard: MSI Z68MA-ED55 (B3) Micro ATX LGA1155 Motherboard ($157.55 @ Newegg)
Memory: G.Skill Ripjaws Series 8GB (2 x 4GB) DDR3-1333 Memory ($39.99 @ Newegg)
Video Card: EVGA GeForce GTX 560 Ti 1GB Video Card ($228.99 @ SuperBiiz)
Case: Rosewill Blackbone ATX Mid Tower Case ($44.98 @ Newegg)
Power Supply: Raidmax 730W ATX12V / EPS12V Power Supply ($59.99 @ SuperBiiz)
Operating System: Microsoft Windows 7 Home Premium SP1 (64-bit) ($91.98 @ Amazon)
Total: $957.46
(Prices include shipping and discounts when available.)
(Generated 2011-10-01 17:50 EDT-0400)
Hard drive(s) : Barracuda 1tb / Hitachi Deskstar 3.5" 1TB 7200RPM SATA II
DVD drive : Dell?
Thanks
Edit: Also Here are some photos of whats going on, in case that helps diagnose the problem.
http://imgur.com/a/yO00s#aTsnU

Quote from: HU16E on 03-October-11, 06:09:20
Give this a try. OS HDD in SATA 1 port, 2nd HDD in SATA port 2. ODD & front case can be left as is. What controller mode was the OS installed with in the other system? With a new system, it is almost never a smooth transition with a HDD that has a previous OS on it. All the chipset drivers & other drivers will be wrong for the new system. A new fresh install is always the only sure-fire way to go.
This is what i started with, the original HD is IDE, but even still, the SATA ports wont register ANYthing, it's like the connection is broke.. I'm getting in touch with them through customer support. Hopefully they will be able to help / replace the board. I posted on some other forums and they all led back to the motherboard being faulty. I even ripped everything back out of the case and laid the board on cardboard, and it was the same thing.
I appreciate your help.

Lenovo Essential G500 - First time booting problem

Hi,
I have purchased the laptop (Lenovo Essential G500 (59-370358) Laptop (3rd Gen Ci5/ 4GB/ 500GB/ DOS)) using flipkart.
The product link is http://www.flipkart.com/lenovo-essential-g500-59-370358-laptop-3rd-gen-ci5-4gb-500gb-dos/p/itmdmugyk...
I have booted the laptop firsttime. It asked to input date and then time. Then its showing c:. Windows 8 is not loading.
Not sure, why the windows 8 is not loading.
Solved!
Go to Solution.

hi senthil_naga,
Welcome to Lenovo Community Forums!
Based on the page where you purchased it
It says Operating system is DOS 64 bit
Spoiler (Highlight to read)
What your system has is a DOS based interface
You will still need to purchase a Windows 8 Installer for it.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Photo shop compatibility vs my semi old computer (first time with photo shop and first time poster)

My computer is unable to run photo shop CC and so on because my computer isn't compatible for being old. I was very sad to find out after purchasing. I did not check the compatibility because again, my computer isn't that old. I'm stessing out until i get a new computer because I really need photoshop for my photography. I think that the CS6 version or even lower would be compatible for my computer until I am able to afford a new one. I run a dell windows 7 I believe. where can i download the older versions of photo shop so i can stop stressing?? thanks

You can get CS6 at the link below. Be sure to follow the VERY IMPORTANT INSTRUCTIONS or it won't work.
CS6 Suite's Tech Specs
http://prodesigntools.com/products/adobe-cs6-system-requirements.html
CS6 Direct Downloads
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Nancy O.

Please help me solve this CS5 issue - I am a first time poster, but long time user

While in the middle of producing a rather large website, I get this error every time I open a file in Dreamweaver CS5 and I cannot preview file using the "Preview/Debug in browser" button.
Error:
---- While executing onLoad in_onOpen.htm, the following JavaScript error(s) occurred. In file "_onOpen": onOpen is not defined ------
In addition, Dreamweaver will not let me use/choose/open the file. Browser preferences keep resetting.
I went on the other forums and the solution points to removal of
<user>/Library/Application Support/Adobe/Dreamweaver CS5/en_US/Configuration/MacFileCache-XXXXXXX.dat
file is suggested, but I have not such file on my Mac OS X Version 10.7.3. I get as far as Library/Application Support/Adobe.
In fact I don't even see Dreamweaver on the list. (see attached.)
Thanks for any guidance - Lauren

Well there is a library folder in your user account but by default it's hidden in 10.7. It's a very common folder so you should either unhide it or know how to access it, for instance by doing a Go To Folder in the finder and opening "~/Library". http://kb2.adobe.com/cps/909/cpsid_90947.html

Help with export speed - First time poster - please be gentle!!

Hi all,
Currently an i5 win 7 with 4gig ram (work PC!!!)
Using Ppro 8.1.0 (81)
As a company we have upgraded from CS6 to CC in the last month
I have played around an everything is looks fine, but I have a 40 second video containing 4 After Effect comps fully rendered sitting on my Ppro timeline. I go to export and choose h2.264 720p 25 as I would have done in CS6 and the estimated file size is 48meg, So I'm thinking that will be a quick render.
At the moment the estimated time reads 2 hours and 7 mins and is climbing!!
What am I doing wrong? I usually export to this setting and a 4 min video on the same machine using CS6 used to take about 45 mins
Thanks in advance, I have looked through the forums, but don't know much about the ins and outs of hardware acceleration or even know where to find it!!
Andy

Hi all,
Currently an i5 win 7 with 4gig ram (work PC!!!)
Using Ppro 8.1.0 (81)
As a company we have upgraded from CS6 to CC in the last month
I have played around an everything is looks fine, but I have a 40 second video containing 4 After Effect comps fully rendered sitting on my Ppro timeline. I go to export and choose h2.264 720p 25 as I would have done in CS6 and the estimated file size is 48meg, So I'm thinking that will be a quick render.
At the moment the estimated time reads 2 hours and 7 mins and is climbing!!
What am I doing wrong? I usually export to this setting and a 4 min video on the same machine using CS6 used to take about 45 mins
Thanks in advance, I have looked through the forums, but don't know much about the ins and outs of hardware acceleration or even know where to find it!!
Andy

First Time Poster

Want to order sound card. Is anybody having any issues with WIN7 64bit on Pavilion Phenom II x6 using soundblaster X-FI?

Unless you call AppleCare and discuss your issues nothing will get resolved.

Need help. first time posting

i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
thanks for any help.

OPEESE wrote:
i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
See if you can find them in your PC, likely somewhere in 'MyDocuments'. If they are there (e.g., a prior backup version) you can probably put them somewhere that can be found by iTunes. Otherwise ...
Phil

First time post problems on older Multivision PC

Similar Messages

Maybe you are looking for