First time scheduling using IP30 for Multiple Counter plan

Hi,
I created a multiple counter plan with Cycle set as 6months/ 300 Operations.
I intend to start the job early and updated the Planned Counter date as  1st Sep 2014.I maintained Lead Float as 10 days.
When I run IP10, call is generated successfully. But when I execute IP30, no call is generated.
We have not activated enhanced functionality of Multiple Counter plans.
I checked all the parameters and everything seemd to be fine. In IP30, I checked the check boxes - Rescheduling & Immediate start of all.
In the field, Interval for Call Objects, I ran with blank value, 30 days value. But in both the cases, call is not generated.
I want to generate calls using IP30 only as there are lot of multiple counter plans. Can anybody suggest a solution to this issue?

Hello
As you intended to use cycle set functionality please activate enhanced functionality of Multiple Counter plans
Br
Rakesh

Similar Messages

  • Getting run time error for multiple counter plan

    Hi Friends,
    Its very critical issue,wherein i am getting run time error for multiple counter plan.
    Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
    Please find the screen shots for your reference and please let me know how to fix the issue.
    Regards,
    Srinika

    Hi,
         Please check reason for update termination in Transaction code SM13.

  • HT1349 When i click the buy it's asking me for a security question cause of the first time of using device for purchasing a game,but im already using this device before

    It's really not working..i always
    Buying an iTunes card and redeeming in one device but asking me a
    Security question cause of first time using device
    For purchasing oh my i already using this device

    Joiz wrote:
    {snip}. . . I don't remember..i know my email add and my password but I dont know the answer. . .
    There's not much anyone here can do for that particular issue.
    Your best bet is to seek assistance from iTunes Support.  If there is an alternate way to accsess your account, it will only be through them.
    http://www.apple.com/support/itunes/

  • I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I think that we all understood what you meant. If the extension cord is no longer working, then return it.
    We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
    Edit - one upped by the lovely lady with the pretty kitty avatar

  • HT204380 help. tried for first time to use FaceTime with another iPhone user & it would not work. "FaceTime failed". we are both on wi-fi networks & iTunes accounts are set up correctly.

    help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.

    Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.

  • I have downloaded ADE 3 on my macbook.  It did recognize my Aluratek Libre the first time I used it but now it does not.  I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre.  Help pls

    I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • My iphone4 keeps shutting off on its own every 24-36 hours and I can't switch it back on unless I plug it into the charger n charge it. I didn't charge the iPhone for a long period the first time I used it and I charge it every night for at least 7 hours.

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

  • I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

    I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

    I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

  • How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
    Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
    If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

  • How to schedule one report for multiple company code?

    How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
    points are given for ASAP replies.
    Thanks in advance
    Peter

    Dear Peter,
    Try to restrict the Company Code with  those 20 values and schedule.
    Regards,
    Ramkumar.

  • I buy iTunes card and when to try redeem its say invalid code and it's my first time to use prepaid iTunes card

    I buy iTunes card and when to try redeem its say invalid code and it's my first time to use prepaid iTunes card

    Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
    http://support.apple.com/kb/TS1292
    If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
    Good luck.

  • I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
    It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
    You could also list any relevant error messages you encounter.
    What version of FCP X are you using?
    All these things will make it easier for people to help you.
    Andy

  • Can i install itunes multiple times on one computer for multiple users?

    Can i install itunes multiple times on one computer for multiple users?

    Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
    tt2

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items

    Hi All
        Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
    NOte:  Suggest me the  Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
    Regards
    Shivakumar Bandari

    Hi,
    Here is the sample code to do that...
    *---> po header data
      wa_poheader-vendor    =  your vendor..
      wa_poheader-doc_type  =  Your doc type..check with Functional contact....
      wa_poheader-purch_org =  Purchasing Org..
      wa_poheader-pur_group =  Purchasing Group
    *---> po header data (change toolbar)
      wa_poheaderx-vendor    =  'X'.
      wa_poheaderx-doc_type  =  'X'.
      wa_poheaderx-purch_org =  'X'.
      wa_poheaderx-pur_group =  'X'.
    *---> poitem data
    data: item like ekpo-ebelp.
    item = '0010'.
    loop at t_parts.
      it_poitem-po_item  =  '00010'.
      IT_POITEM-PLANT    =  Plant..
      IT_POITEM-STGE_LOC =  Sloc...
    *---> poitemx (item data change toolbar)
      it_poitemx-po_item  =  '0010'.
      it_poitemx-po_itemx  =  'X'.
      IT_POITEMX-PLANT    =  'X'.
      IT_POITEMX-STGE_LOC =  'X'.
    *---> add record's to internal table
      APPEND:  it_poitem,
             it_poitemx.
    endloop.
    *call bapi_po_create1
      CLEAR v_ebeln.
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = wa_poheader
          poheaderx        = wa_poheaderx
        IMPORTING
          exppurchaseorder = v_ebeln
        TABLES
          return           = it_return
          poitem           = it_poitem
          poitemx          = it_poitemx.
    *---> check the return table for error message
      READ TABLE it_return WITH KEY type = 'E'.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      endif.
    Thanks,
    Murali

Maybe you are looking for