First time setting up time capsule...questions on best way to set it up.

To anyone that can offer some advice,
I am currently living in Denmark, only for another 5 months or so and bought a time capsule today for back up purposes of my macbook 13 inch purchased in February of 2009. I am currently running Mac OS X Version 10.6.5. Here is my situation...My roommate and I currently have a wireless router/modem combination that was provided by the cable company. I want to back up my computer wirelessly and get the best performance out of my time capsule without interupting my other wireless network. My roommate runs a PC and has zero interest in computers (other than internet usage) and will not be using the time capsule to back up. In a best case scenario, I do not want to interfere with his current internet connection to the provided router. (essentially he won't even know I have a time capsule)
I haven't taken the time capsule out of the box yet, I want to set it up perfectly so my computer is backed up and will be backed up wirelessly for the next 5 months and when I move I simply take it with me and no issues occur. My questions are these....
What is perfect set up method for me?
Where do I plug ethernet cables for optimum performance?
Should I keep my TC located on ground floor next to current wireless router or can it be in my bedroom?
When I unplug the TC and take it home in 5 months...will setting it up as a wireless router in my new apartment affect the data stored on it?
I hope this post is clear and someone can provide some insight.
Thanks

b2tree wrote:
My roommate and I currently have a wireless router/modem combination that was provided by the cable company. I want to back up my computer wirelessly and get the best performance out of my time capsule without interupting my other wireless network.
that can easily be achieved.
What is perfect set up method for me?
assuming your room is on the same power circuit as the room where your friends's router is located, and if you're willing to spend a little extra $$, i would recommend this:
● get a pair of *powerline adapters* _*such as these*_.
use them for an ethernet connection between the main router and your TC
● using *airport utility* (in your applications > utilities folder), i would set up the TC in +*bridge mode+*
● have it create a wireless network, give it a name, secure it (also password protect access to the TC's wireless router side !)
Where do I plug ethernet cables for optimum performance?
the *powerline adapters* come with a short ethernet cable. connect one to a free LAN port () on your friend's router and the other to the WAN port () of your TC.
Should I keep my TC located on ground floor next to current wireless router or can it be in my bedroom?
following my recommendations above you can set it up in your bedroom
When I unplug the TC and take it home in 5 months...will setting it up as a wireless router in my new apartment affect the data stored on it?
no.
JGG

Similar Messages

Although we have iPhones and iPads, this is our first mac pc and we wanted to know the best way to set up multiple users with parental contro;s

although we have iphones and ipads, this is our first imac and we wanted to know the best ways to set up multiple users with parental controls

I'm assuming you have the lastet OSX version 10.9 "Mavericks." Here are some useful links from Apple I think will help:
http://support.apple.com/kb/PH14414
http://support.apple.com/kb/PH14099
http://support.apple.com/kb/PH14280
and a video:
http://support.apple.com/kb/VI28
I suspect you have a newer iMac than the pre-2006 models this forum covers (the forum labels are unbelieveably vague). If you can confirm that yours is newer than 2005, I can ask the Hosts to move you the the forum for current iMacs, which gets many more views.

What Is The Best Way To Set Up Kids iTouch To My iTunes?

I have an iTouch set up with my iTunes music, movies and apps, but now I gave my kids each an iTouch.
What is the best way to set up there account, should it be a unique account for each of them or should I put them under my account?
They will be using my same iMac when they sync or update there iTouch, so will they need to log in under their name every time?
Not sure what is the best way to set this up, they are both minors, i.e. no credit card.
Thanks

Better just your account for multiple devices. The only drawback is that the music will have to managed manually.
Connect one of the iPods to your computer then launch iTunes. You should see the iPod under Devices on the left side of the iTunes window. Double click then you can name each iPod to keep them separate but only syncs to your iTunes account.
Without knowing your Apple ID user name and password they would not be able to make purchases ergo no downloads you aren't aware of.
How to use multiple iPods, iPads, or iPhones with one computer
The kids are minors.. if they are under 13 years of age, according to Apple, they can't have their own accounts regardless.
http://www.apple.com/legal/itunes/us/terms.html#GIFTS

Best way to set up home network using Time Capsule

Hi
My current home network consists of Macbook Pro 17 connected wirelessly, another Mac and few pcs. I have a Time Capsule, new netgear router and several hard drives. At the moment my main drive is plugged in via usb to the mac, however id like to set up a proper mini network where i can at least share several drives between macs, HOWEVER i also want to back up this data via TC, which is why at the moment my hard drive is plugged into the mac, so it can be backed up. Am i correct is saying that TC will not backup netwrok drives?
..any suggestions for best way to set up a network with TC backing up drives?
Thanks

paulsutt wrote:
Am i correct is saying that TC will not backup network drives?
Yes.
..any suggestions for best way to set up a network with TC backing up drives?
You could share the locally-connected drive. That would require that your Mac be on whenever any other network client needed to access the drive.

Best way to set-up U Verse, Time Capsule and Express to Extend Network

I'm trying to extend my WIFI signal with AP Express and TC using an AT&T U Verse router. Neither the Express nor the TC are directly connected to the U Verse router. Both the Express and the TC show they are connected to the network but when I try and edit the settings to extend the network rather than join the network they both show as not connected any longer. Before on DSL the Express and TC were connected as extending the network (slow but connected). The house is 3 levels U Verse in in the basement. Trying to get a connection on the 3rd floor. We have multiple iPads, iPhones, Mac Book Pro's, an i Mac and Direct TV receivers.
What's the best way to set this up to extend the range of what we have?

You cannot extend range from non-apple routers.
So both the TC and express will join the wireless of the uverse and then become dumb clients..
You need at least one of the two units plugged into the uverse by ethernet.. then the other device can extend that network.
Consider using EOP adapters if your distance is such that even with the correct setup you don't get the range you need. Or better still do it properly and wire it with ethernet.
It is possible to use the Express as a bridge..
So say setup on the first floor.. a wireless bridge from the express to the uverse.. then plug the ethernet into the TC.. and use the TC in bridge mode.. it will not be fast but it can work.
Reset everything to factory and start over.. as you will not be able to get this working without a full reset of the apple routers.
Note still not ideal but it might give you more range than extend wireless with say express plugged into the uverse.

HT3819 what is the best way to set up my childs iphone with apple id and as part of home sharing?

what is the best way to set up my childs iphone with apple id and as part of home sharing?

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

What's the best way to set up new imac for logic etc?

In brief:
Getting new imac (27", 3.4 i7, 8-16GB ram, 1TB HD). Will be using it mainly to run Logic Studio (loads of plugins) and Final Cut Express. I also have 2 external Hard drives one 500G one 1TB.
The last imac I bought was my first and just went ahead and threw everything at it not really knowing where things should go. This time I want to set things up correctly.
Basically, with what I've got, what is the best way to set things up. I.e where do I put logic files, samples, BFD2, Amplitube etc. Where do I put videos for use in FCE. Storing projects and backups for use with Time Machine.
Also noticed the new imac will only have 1 firewire port. I will need to plug in the Hard drives (daisy chained), camera and RME Fireface 800. Was thinking of getting a Thunderbolt Hard drive but they are expensive and hard to find.
Would really appreciate any help before I get the new machine and start messing things up again.
Thanks.

Adding to babowa, enable the system firewall in System Preferences>Security>Firewall tab. Click Advanced and check Stealth Mode.
Lion is a pretty steady and secure operating system, and as there really aren't MANY Mac viruses, there ARE viruses out there still. OS X is pretty good about letting you know if you do accidently download a virus, and it will help you throw it away if it detects one, such as the MACDefender virus. OS X has built in security features such as sandboxing that doesn't allow viruses in as easily as a Windows PC. As for hackers, as long as you have the firewall enabled and a secure password (for your computer and email accounts), then you should be fine.
It's the user that lets the virus in, not the computer (unless there's some untold serious vulnerability in OS X, which is highly unlikely). Keep your apps up to date, don't download pirated software, and be street smart on the internet. Don't download things or visit websites that you don't think are real. Safari includes a Phishing feature that automatically detects known phishing sites, protecting you from that big problem. Keep your passwords secure and you should be fine.
There are antivirus solutions out there, one notable one available in the AppStore is Intego's VirusBarrier (free and plus versions), if you feel you still need one.
I wouldn't worry about it. Windows users who switch to Mac are always asking these questions.
Here's some good reading as well
http://www.apple.com/macosx/what-is/security.html
Enjoy OS X Lion

Best way to set up partitions on 250GB external drive

Hi all,
I've decided to go with an Iomega eGo 250-GB FireWire portable drive to back up my iBook's hard disk (30 GB) plus to store my photos and maybe hold a bootable copy of OS9.
This is my first time using an external drive, so I don't really know how to go about setting things up.
What would be the best way to set up the partitions on the external drive?
1) I know I should create a 30GB partition for the iBook backup, but what about for the remaining volume? Is it best to leave it as a single large 200GB partition, or split it into two 100GB chunks? Other than the clone of my iBook, I'll mainly be storing photos (at the moment no more than around 10-12GB).
2) I don't yet have a huge iTunes collection, but if I later want to store iTunes music that doesn't fit on my internal drive, is it fine to put it in the same partition as the photos, or would it be preferable to create a separate partition?
3) If I want to install OS9 on the drive, how much space should I allot to it? Would this enable me to run legacy apps on my iBook?
4) Does it matter how I name the partitions (i.e. should the name for my iBook back-up be the same as the original volume or should it be different?)
5) As I still don't know exactly what I need, If today I decide to create only 30GB partition to backup the iBook, can I later partition the remaining space without having to start all over again?
6) Also, the drive came out of the box with Mac OS Extended format. Is this the best format or is there another that would be better?
Thanks for any advice
Message was edited by: Lutetia

1) I know I should create a 30GB partition for the iBook backup, but what about for the remaining volume? Is it best to leave it as a single large 200GB partition, or split it into two 100GB chunks? Other than the clone of my iBook, I'll mainly be storing photos (at the moment no more than around 10-12GB).
2) I don't yet have a huge iTunes collection, but if I later want to store iTunes music that doesn't fit on my internal drive, is it fine to put it in the same partition as the photos, or would it be preferable to create a separate partition?
The answer to both question is that it's completely up to you. Partitioning or not partitioning won't affect operation significantly.
3) If I want to install OS9 on the drive, how much space should I allot to it? Would this enable me to run legacy apps on my iBook?
The iBook G4 can not boot from OS 9 so you would only be able to run OS 9 in the "classic" environment.
4) Does it matter how I name the partitions (i.e. should the name for my iBook back-up be the same as the original volume or should it be different?)
No
5) As I still don't know exactly what I need, If today I decide to create only 30GB partition to backup the iBook, can I later partition the remaining space without having to start all over again?
There are a few tools which promise the ability to change the partitioning without destroying the data on the drive. But you should never do this without making a backup of the data on the drive. Data loss can easily happen and in a big way.
6) Also, the drive came out of the box with Mac OS Extended format. Is this the best format or is there another that would be better?
That is the best format.

Best way to set up a Mac laptop for multiple users with AD logins

I am setting up a MacBook Pro running 10.4.11 that will be used as a "loaner" notebook for meetings, etc. The computer will be used internally at our company, so users will be logged into our network. Active Directory is set up on this computer to allow all domain users to log in using their own user name and password; this approach helps meet our company's security standards (we want to avoid using one common login or account for all users).
While this approach seems to fit our needs, it causes problems when it comes to running applications. For instance, each new user is prompted to enter first-time usage information when launching an application (forcing them to contemplate registration information, various settings, etc.). I've given "everyone" read-write privileges to the HD > Library and the Applications folder, but this does not solve anything and may not be a good approach anyway.
I would welcome any advice on the best way to set up this computer for multiple users logging in via Active Directory. Thanks!

Where are you installing the third party applications? It sounds like they are being installed in the 'User 1' account, rather than the /Applications folder (admin or not, one user normally can not see into another user's folders). Repairing permissions only works for applications that have a file in /Library/Receipts, not on folders in general, so you would need to check the permissions for the folders in question.

Best way to set up a new system with RAID?

I'll be buying a new Intel Mac Pro when Leopard comes out (for my office). I can get it with as many drives as fits into the bays (4?). My question is, what's the best way to set up a disk redundancy? I'm assuming I want one of the drives for Time Machine. That leaves 3; what kind of RAID do I want to maximize safety if and when one of the drives dies? I'd also like to optimize disk access time, as a secondary consideration. So, 1) what RAID do I want and how many drives will that take, and 2) how do I set it up? Presumably the thing will arrive all set up with Leopard installed. So, will I have to hose that installation to change the file system to RAID? Any problem with that (is it worth it)? If so, what disk do I boot from to set that up, and what's the right way to do this and get a working system back?
Mike

Leopard wont be out befor the second half of this year, sofar i cannot tell you what options you are going to have with the new system. Seems like with time machine is going to be a perfect backup for your whole system.
10.4.x:
Software RAID you can do 0 -1:
To setup a RAID of your system you have to format the drive and setup the RAID type you want from the disk utility.
To have some security i suggest the "mirror" options but you are going to lose some perfomance, depending you want is your main job it mighn't be noticed.
RAID 5:
This would be the nicest option but you need to buy an additional RAID controller. This is mostly used on servers and not on client computers.

Best way to set up or migrate to a new Mac?

Briefly, the best way to set up my new iMac (which arrives shortly) and transfer my accounts, files, etc. from my older iMac (intel OS X, 10.6.7).
I have a time machine back up external hard drive connected via fire wire.
I don't have a second firewire cable but would buy one if it helps.
I have an extra ethernet cable.
I use an ATT Uverse router as my network hub.
Ideally. I want to transfer all settings EXCEPT for a dozen downloaded applications that I no longer want. If I can't pick and choose applications to transfer, then I will re-download them onto the new machine.
What would you recommend?
1. Using Set-up assistant on the new machine? If so, do I physically connect the two machines before powering on the new one?
2. Using Migration assistant after getting the new machine powered up? If so, does it matter if I use mig/asst on the new machine and choose transfer files 'from another Mac' or use mig/asst on the old machine and choose transfer files 'to another Mac'?
In short, given these facts about my situation, what might be the better way to proceed?
Thank you!

Just to second what NewMac1 says, the link to Setup assistant tips (above) doesn't work. Can someone please provide new link? thanks.
It links to a mobile me address, maybe the website was hosted on MobileMe before it closed earlier this year?

Best way to set up a second monitor with a Touchsmart

What's the best way to set up a second monitor for the Touchsmart IQ506? Is a USB to VGA cable the only way and how well does that work (I've read that they can be buggy)?
Are they any recommendations for products and setting it up?

Leopard wont be out befor the second half of this year, sofar i cannot tell you what options you are going to have with the new system. Seems like with time machine is going to be a perfect backup for your whole system.
10.4.x:
Software RAID you can do 0 -1:
To setup a RAID of your system you have to format the drive and setup the RAID type you want from the disk utility.
To have some security i suggest the "mirror" options but you are going to lose some perfomance, depending you want is your main job it mighn't be noticed.
RAID 5:
This would be the nicest option but you need to buy an additional RAID controller. This is mostly used on servers and not on client computers.

Best way to set up iPhoto; external drive

HI!
I want to set up iphoto in a way that steals less of my ssd drive space. I will buy a usb 3 harddrive, where I store my pictures. In iphoto I just want a reference to the picture on my external harddrive. But when working, some times I want to delete pictures; can I do this from iphoto, or will I only delete the reference?
How do I make sure that I have no duplicates, when I store files this way?
Ok, how do I set this up; is iphoto the best way?

But when working, some times I want to delete pictures; can I do this from iphoto, or will I only delete the reference?
It will only delete the Reference. iPhoto is not the best way. If you want to use iPhoto the best way is to run a Managed Library from the external disk.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361
Aperture is much more powerful in this regard.

Advice on best way to set up 500 GB external hard-drive - scratch & back-up

Hi all -
I would like to get some advice on how to best set up my new 500GB external hard drive. I do lots of video editing, so my primary use for it is as a scratch disc. However, i like to have a back-up clone for emergencies so in the past I have always had a partitioned external. One for back up, one for media. Now that Leopard has the time machine feature, i have read that some people like to use one volume on their external for TM and the other for a bootable clone (using Carbon Copy cloner). Doing this will take up a lot of space on my hard drive and I really need it for media storage. Does anyone have any suggestions on the best way to set this up? If I had a clone on one volume, could i then put Time Machine on my Media volume and call it a day?
Thanks so much for any feedback!
Karen

You've essentially said that you're concerned about not having enough disk space for everything you do. I suggest a 2nd drive, as there is no partitioning scheme that's going to create more space for you. I'd set up one drive with 2 partitions - a bootable partition and a partition for TM. I'd dedicate the second drive to media. I wouldn't put TM and media on the same partition; in time <grin>, Time Machine will fill the partition.
And by the way, imho you should turn TM off anytime you are capturing, rendering or exporting; you don't want it using system resources (CPU, RAM or I/O) while you're doing those tasks.

What is the best way to set up iTunes to deal with a massive media library?

I have a really big media library...probably 7k-10k digital photos, close to 1,000 ripped CDs, and over 600 ripped DVDs, all stored on 1.5TB external hard disks in a 4-drive enclosure.
Due to a recent technical glitch, I find myself installing a new drive and moving the current library. My question is, what is the best way to set up iTunes' settings to deal with a media library that is both external to the Mac on which it runs, and spans multiple physical hard disk units?
I generally like the idea of iTunes organizing my library for me (i.e. keeping everything in Media Type>Artist>Album folders via the "Automatically Add to iTunes" folder), but I'm not sure how that's going to work spanning multiple drives.
I just figure since I'm basically starting over with my iTunes installation, maybe there's a better way to do it.
Thanks in advance for any advice you can offer.

You can set them up as a software RAID using Disk Utility.
It'll simply be one large disk for all intents and purposes.

First time setting up time capsule...questions on best way to set it up.

Similar Messages

Maybe you are looking for