First time use of a secondhand 3gs; SIM failure (the SIM works fine in other handsets); any suggestions as to how I can fix this?

Hi L.T.D.,
To only answer the question you asked, the answer is yes you can do those specific tasks you mentioned.
My example:
Since you don't want the sentence if A2 is blank you would modify this formula to something like this:
=IF(ISBLANK(A2),"","the patient reports "&A2&" that won't leave.")
I don't see a problem if all you are looking to do is to translate your form or forms into a report. I could even see several different forms reporting to one sheet that tracks their history. It may require a lot of maintenance if there are an increasing number of forms reporting.
Sometimes merged cells create difficulty in Numbers. A mix of popups and checkboxes may complicate things.
I think the previous advice may turn out to be the best, though. You are asking,"If I head this way am I headed to Japan?" I am saying "Yes". They are saying, "You will need a boat!"
quinn

Similar Messages

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other devices. I haven't moved to ios7 yet. Any ideas?

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?

What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

HT4972 ipad used to work fine with wifi Vizio. now the connection does not work while other lap tops and Ipods in the house work fine with wifi. any suggestions to solve this please

Any suggestions please on how to recover connection of ipad2 to Vizio wifi? (it worked fine in the last few months but the connection no longer exist although other laptops continue to have wifi connection to the same Vizio router.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have a Time Capsule and it is flashing amber. The airport utility says that there are no DNS servers. How do i fix this?

I can still connect to the wifi signal with my computer but it won't stop flashing amber until i fix this issue

Have you configured the wireless on the Time Capsule? Do you have the wireless port enabled on the computer? Are you connected to the wireless network of the Time Capsule?
In Airport Utility using the Wireless panel here's what it looks like on my AEBS:
In your Network preferences you should see:
There should be a valid IP address for IPv4 that should begin with 10.0.1.

HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath

Using iMovie 10.0 my project say it's 10 hours when it's 25 minutes for real, how do I fix this?

Using iMovie 10.0 my project say it's 10 hours when it's 25 minutes for real, how do I fix this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Every time i open a word document ALL my word documents open as separate windows. Same with PowerPoints. How do i fix this?!

every time i open a word document ALL my word documents open as seperate windows. Same with powerpoints. How do I fix this? Its getting really annoying.

If you are using Apple's Mail app, whichever os you have, post in its os/Mail forum area.

Iphone 6 airdrop problem can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

hi raz, i don't have problem how to use airdrop , but the iPhone 6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS, iOS 3.1.2. Thanks

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help

please help me!!!

Tried to transfer all my data to iPhone 5 from iPhone 3GS lost my email and app data? Do you why and how I can fix this?

Hi...
Tried to transfer all my data to iPhone 5 from iPhone 3GS lost ONLY my email and app data? But weird thing is, its still on my old phone!!!
Do you know why and how I can fix this?
Shelley

How did you "try" to transfer this data? The only way to restore App data is by restoring from a backup that contains the App data, then syncing the Apps back to the phone. Emails are not included in any iPhone backup, only account settings.

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

Plug the device into the computer.
Select the content desired to sync.
Sync.

I'm help a friend with a new 4S iPhone. He's converting from an old 3GS. We've gone throughout the activation, update to iOS 5.0.2 and restored. Now I'm surprised to find that the Facetime app is not on his new 4S iPhone. How do we fix this?

I'm helping a friend with a new 4S iPhone. He's converting from an old 3GS. We've gone throughout the activation, update to iOS 5.0.2 and restored. Now I'm surprised to find that the Facetime app is not on his new 4S iPhone. How do we fix this?

I would suggest you read the user guide. There IS no Facetime App for the iPhone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
< Edited By Host >

HT1349 my mac is giving me a plug in error every time i am on the internet and change web pages...... how do I fix this?

this is what the error message says on every page...How do I fix this??? please help.

If sounds like you either have a missing or misconfigured browser plug-in. If you are using Safari, you should be able to disable all current plug-ins one at a time untll the error disappears. This should give you an idea on which one is the problematic one.
Sorry, but this is not really an AirPort networking issue but one related to your browser. As such you may get better responses to your issue if you post your question in one of the OS X areas of the Apple Support Communities.

First time use of a secondhand 3gs; SIM failure (the SIM works fine in other handsets); any suggestions as to how I can fix this?

Similar Messages

Maybe you are looking for