First time use of camera does not make a sound but use again then shutter sound can be heard

when i first usse the camera on my i phone 4s the shutter does noy make a sound.
when used again then the shutter soound  works.....any ideas/????????????

so chris...
It IS in fact "New" as it started a couple of days ago - AND - something indeed has changed = "... updated to iOS 8.1" - BUT - a little unclear about the context of "... when (f)irst released all ok" part? are these two separate statements?  "... updated to iOS 8.1 when it [was] first released" and "all was OK prior that point" and then started misbehaving right after the update? - OR are you saying that when "updated to iOS 8.1 [WHEN IT WAS] first released, all was OK - as in the shutter-snap sound worked fine and THEN suddenly began misbehaving"
In these forums, it may be to your advantage to try not using IDevice 'texting' practice of being brief... in here, MORE is more better.
If the update was the beginning of the issue, that may be added to the list of strange things that happen to some and not to others.
I would suggest a visit to the Genius Bar if one is nearby, but older iPhone may only get you so far if you don't stick by your claim that "everything was fine until I updated my iOS 8 version"
as I cannot help, I will leave you in this forum and further advice you may get here in Using iPhone (you know that you started the question out in Using Apple Support Communities forum)
ÇÇÇ

Similar Messages

  • The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
    To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
    If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
    The following might work, but you will not know until you try.
    Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
    Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
    The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
    (What is the difference in the 2 -- one is about twice the price of the other…)
    http://www.apple.com/wifi/

  • LR does not see iPhone 6, but used to

    Running LR4 on Macbook/Yosemite. Used to import photos via wire from iPhone 6. Now LR does not see the phone. Recently upgraded from Mavericks OS--is this the cause of the problem?

    OK-went back to the beginning, unplugging, restarting, etc. and now it is working.
    Never mind the question

  • I installed itunes on my hp netbook.  Opening items for the first time, the user agreement does not show an "accept" button to accept the agreement and use itunes.  Have reinstalled twice with the same result.

    Is itunes compatable with HP netbook?

    If the netbook has less than 768 dpi vertical resolution, the "Accept" button will be displaying off the bottom of the screen. (I'm afraid, if so, you'll run into similar trouble when trying to make preferences changes.)
    With any luck, the "accept" button although not visible on your system might be the active one. If you hit your enter key does the setup proceed beyond the liscensing agreement?

  • Contact uses a tracfone, does not receive text messages but sent messages show on iPhone 6

    As recently as 2 weeks ago, text messages where working to and from this contact. His carrier with Tracfone is AT&T.
    I've already done some troubleshooting:
    I am able to receive messages from my contact with the Tracfone, and it appears to send the message. But he never receives it.
    He is able to send/receive messages from other contacts - including contacts with plans, and contacts with straighttalk/prepaid.
    I am able to send/receive texts from other contacts - including those with plans and those with prepaid.straighttalk/prepaid.
    He is not able to receive a group message from me, although other contacts do.
    I am able to send/receive group messages from other contacts - including those with plans and those with prepaid.
    I have tried with iMessage turned on and with it turned off.
    I have tried with MMS messaging  turned on and with it turned off.
    I've verified the number is not listed as blocked.
    I've deleted and recreated the contact and verified the number is correct.
    Cellular data is enabled, as is LTE voice & Data.
    I have service, and have not received any red exclamation points indicating failed to send.
    I've already tried turning the device on and off.

    Bunifufu, we appreciate you providing us with your phone type details. That is definitely odd that this is occurring. Just in case, what type of phone does the other user own? While it is strange they aren't receiving your messages, and that your phone displays sent. (Especially if the other person uses an iPhone and iMessaging too) There may  be an issue on their end if it is indeed sending correctly on your end.  NicandroN_VZW  Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Lightroom does NOT make use of new/fast hardwares!

    For those who are considering a new computer here's my experience....
    Lightroom 4 does NOT make full use of new/fast CPUs / SSDs!
    I’ve been frustrated with Lightroom speed since launch and held on to my “old” Xeon work station for two years…. I recently invested in the latest Intel CPU and IO technology and I'm very disappointed how Lightroom 4 does not make use of it. It's most noticeably sluggish from one photo to the next during editing. This may seem small but when I edits hundreds of images everyday it really slow me down.
    See my system specs at very bottom of this post. I don't think there's a bottle neck in performance! I love my new setup and it's a pleasure to use the OS. BUT I'm so disapointed everytime I load up Lightroom. (My typical Lightroom edits are 600-900 sRAW images - I edit down my photos in Photo Mechanic 5! It's just too slow in Lightroom)
    Lightroom still take time to load each image when advance from one image to the next (During editing). Isn’t smart enough to cache 100 images in advance let say. (1:1 previews as been created!)
    Won’t make use of more than 8GB ram. No matter how big the RAW working set is.
    Very slow switching from one working module to another
    Lightroom Jpeg export won’t make use of more than 25% of new Intel Xeon E5 series dual processors processing power 12 cores. 6-9 cores are literally taking a nap during export!
    I’ve tried everything found in Adobe suggestion link below:
    http://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html
    * I definately tried 1:1 render preview and all of the other jazz found in link directly above!
    * Running all latest firmwares and updates
    I hope the next version of Lightroom will actually make use of good hardware instead of adding on more features. We desperately need a snappy/responsive Lightroom for sake of productivity! I'm not here to put down Adobe. I'm a big fan of Adobe and Intel and have been using them for 15 years.
    My Setup:
    Dell Workstation T7600
    Dual Xeon E5-2630 2.5GHz (12 Cores Total)
    64GB 1600Mhz RAM
    OCZ RevoDrive 3X2 - 1500MB/s (Boot / Camera Raw Cache)
    4 Intel 520 Series SSD in RAID0 with dedicated 1GB Cache SAS/SATA PCIe 3.0 controller (Working RAW files)
    Nvidia GTX680 - 4GB VRAM (I know this made for 3D but it has PCIe 3.0 connectivity - Quadro 4000 PCIe 2.0 wasn't any better)
    Drobo-S 2GBx5 (Strictly Storage)
    Windows 7 Ultimate (Bare minimum! Just Adobe CS6 suite and Microsoft Office 2010)

    Can you copy this to the Feature Request forum so we can vote on it please?  http://feedback.photoshop.com/photoshop_family  And then post the link here so we can find it.  It'll get my vote.
    There are a couple of others you might like to vote on too, such as using the embedded preview for editing down.  http://feedback.photoshop.com/photoshop_family/topics/lightroom_capability_to_display_embe dded_preview
    In terms of workarounds for now, if you haven't tried the 4.2RC yet, you might find the module switching a bit faster.  And for better use of your exports processing power, try splitting your export into 3 or 4 and running them concurrently (i.e. set the first going, and immediately set the second going, etc.) as that'll make better use of the extra cores if your hard drives are able to keep up with them.

  • IPhone 4 does not make or receive calls/text at a location it used to.HELP!

    I started experiencing this sometime last week. It does not make any sense to me so I ask you. My phone does not make or receive phone calls and texts while I am at my workplace. It had worked find from when I got the phone (Late August) through January. If it stopped working completely I'd figure it was a dead zone or something, although they do not just pop up out of nowhere. But it works sporadically. Like if i got to send a text maybe 1 out of every 4 will work, same with receiving them. And this is the same with phone calls. I will receive a call, get through maybe 15 seconds of it, then the call gets dropped. Then for the remainder of the day (as I do not use it much during work) it will not receive a call, it goes right to voicemail. I have tested this by repeatedly calling my phone from my work landline. It rings fine on that end, so others wouldn't suspect I am having an issue, and goes to voicemail. I left a voicemail and my phone did not alert me to it for over 10 minutes (it never told me I had a missed call) During this timeframe I also attempted to make phone calls from my iPhone, they would not ring, it would immediately drop. But again, it is sporadic. So after 5 or 6 times of attempting making phone calls one goes through. I had made an appointment at the Apple Store the first day that this happened but once I was on the road to the store I got all my texts, voicemails, pictures that I had attempted to send earlier, so I thought it pointless since I had no real proof of this happening. But now it seems to happen everyday, it just happened which prompted me to write this. Again, its only at work, and only recently started happening. There is no cell tower issue, everyone elses phone works here. I have turned off the phone, both a soft and hard reset, reset network setting, turned off/on 3G, Cell Data, taken out the SIM, moved it, etc. Everything short of getting another phone, but it works perfectly fine everywhere else. Any ideas???

    I ended up taking my phone in to the Genius Bar, but we were unable to diagnose the problem. The genius said she had never seen anything like this before. We tried everything to figure out if it was hardware or software related, but never concluded anything. Instead of paying >$150 to fix/replace, I bought the iPhone5. iPhone5 is amazing. Maybe it was fate.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

    Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

    Hi Rogerya,
    Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
    How to Troubleshoot iSight - Apple Support
    https://support.apple.com/en-us/HT2090
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    1. See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    2. See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    3. Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    4. Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    - Matt M.

  • I tried to open illustrator it said: subsystem fail catastrophically and I must reinstall or call customer support. So when I reinstalled it says: I can only install one Adobe product at a time. I am not installing anything else. It does not make sence.

    I tried to open illustrator it said: subsystem fail catastrophically and I must reinstall or call customer support. So when I reinstalled it says: I can only install one Adobe product at a time. I am not installing anything else. It does not make sense.

    Hi Gasbarro,
    When trying to reinstall using the Cleaner Tool Jacob suggested, can you take a note of the location?
    Error: "The licensing subsystem has failed catastrophically." when you start a Creative Suite 3.x application
    Please try refer to the help doc and let us know if it helps.
    Thanks,
    Amy

  • How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

    I hope there has been found a more efficiant solution for this,  how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
    any suggestions?

    Did you try browsing your backups in the Finder ?  That is, do not go and "Enter Time Machine".  Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

  • When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
    That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

    I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

    Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
    Retry Windows Explorer and see if your camera is showing. If so try LR import again.

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Maybe you are looking for