First time user..problem with compatibility mode

Old problem with a twist. Like others have experienced, when I open itunes I get a message that reads itunes.exe is set to run in compatibility mode and I need to turn it off. The problem I have is that I DON'T FIND a compatibility option when I right-click on Properties. Any ideas???

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

Similar Messages

HT1349 i have just bought an ipad2 from usa. now i am in dia. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the dev

i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help

You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
The User Guide would be good for you to read:
http://support.apple.com/manuals/#ipad

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

Problem losing Compatibility Mode in migrating to 9i

I am currently working on migrating a large number of forms to 9i. Some of these forms were created by Designer 2 for Forms 4.5 and have been manually maintained over the years and are currently running client-server under Forms 6i. However, many of them have the Forms Compatibility Mode set to 4.5. In preparation for the step to 9i, I am updating the forms under 6i, replacing deprecated builtins that are not included in 9i, etc, and changing the Compatibility mode up to 5.0 (9i does not have a compatibity mode property).
I have come across a problem with one form which does not operate correctly when I switch off Compatibility Mode 4.5. It has 4 blocks in a simple master-detail-subdetail-subsubdetail structure. The Copy Value From Item property is used to deal with the foreign keys. Querying and scrolling through records works perfectly. However, on creating a new record in the second level, the subdetail blocks do not pick up the new key values, but retain the last values they held. With Compatibility Mode 4.5 set, the form works perfectly.
I have read through Metalink and found the differences between 4.5 and 5.0 and can not see anything that would cause this behaviour. Has anyone else experienced anything similar please?
Ian Morgan

OK, I can answer my own problem now. The form had a When-Validate-Item trigger on the lowest level block which apparently fired before the Copy Value From Item takes effect in 5.0 Mode, but must be the other way around in 4.5 Mode.
I moved the When-Validate-Item trigger code into a When-Validate-Record trigger instead, and now it works as required.
Ian Morgan

Trial Photoshop CS6 - can I access it as a first-time user?

I downloaded trial Photoshop CS6 on my iMac as a first-time user, knowing that my serial number for CS1 was out of date (I'm retired and haven't used Photoshop for years). But I can't activate it. Is it not available for first-time users and if not, how can I uninstall it safely? I really want to try it out before I buy the full version, and was unaware that I needed a serial number until the install.

You don't need a serial number for trielas. if it timed out, something went wrong.
Adobe trial software expired early
Uninstall it using the uninstaller that comes with the program.
Mylenium

First Time User - Confirmation Of Subscription and...

First Time User. I want to replace my existing VoIP with Skype equivalent. The wiring between Skype hardware and internal phone lines is already in place for the existing VoIP so there is no issue there and I am aware there is no number transfer.
Calls are all from to USA. Incoming number required. Voice Mail Required. From the website I believe the following package would be required.
1. Purchase Home Phone Adaptor, one time, $49.99. I configure it with online number somehow but that's a TBD for later.
2. Purchase subscription for US and Canada $2.99 a month or yearly (save 15%)
3. Purchase online number $30 per annum with subscription purchase. comes with voicemail.
I am assuming Android/iTouch calls over Skype will be able to use same Skype subscription?
Is there anything else I should know?

Hi Mike,
It seems you have done your research.
1) For outgoing calls Unlimited US&Canada works fine
2) For incoming calls Online Number costs 30USD per year
Important: Make sure you purchase a subscription first, otherwise you don't get a discount and Online Number will be 60USD
3) Voicemail is free service, you can set it up any time from your account:
https://secure.skype.com/account/
4) From hardware side, subscription is linked to your Skype account, therefore it doesn't matter if you make calls from PC, certified Skype phone adaptor, Android phone or iTouch.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

First time user of Mac(Book Air) and mouse sensitivity not high enough

First time user of Mac(Book Air) and one thing that has bothered me is when I use a generic USB mouse and I've set the tracking speed/sensitivity to the max and it's still not high enough and it just irritates me to no ends. Am I not doing something properly being a first time mac user? Thanks in advance for any response.

Depends on the mouse. "Laser" with shorter wavelengths are far too sensitive for me and need to be dialed down. IR is worthless in my opinion because they cannot move properly across a black/white checkerboard.
I actually (to my great surprise) love using the trackpad and hate to use the mouse because trackpad keeps my thumbs directly between my hands while typing. But that is just me.

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

I am a new first time user of adobe to convert pdf. files to word, etc. I must add that I am 75 years old and not a computer literate fellow. I have a fairly large pdf file that I want to convert to word so I can cut ?

I am a new first time user of adobe to convert pdf. files to word, etc. I must add that I am 75 years old and not a computer literate fellow. I have a fairly large pdf file that I want to convert to word so I can cut & paste, etc ? Any & all help will be appreciated.

Haakwine you have posted to the Downloading, Installing, Setting Up forum. Which specific Adobe software or service are you trying to use to convert PDF files?

Double Click Event not fired for IE 11 with compatibility mode for HTML elemnt table

Hi,
I am facing an issue with Double click event(not getting fired on double click of mouse) for IE 11 with compatibility mode on HTML element "table" for Windows 7 64 bit machine.It runs fine on IE 10 with compatible mode with Windws 7 64 bit
machine -- double click event.
Can you please help to resolve the issue?
Thanks and Regards,
Yogesh

Hi,
f12>Debug tab, click the 'start' button.....(select break on all exceptions from the dropdown on the Debug tab)
click your table and correct any errors that are listed in the Console of the developer tool.... probably you are using attachEvent I/o addEventListener. You should be using addEventListener for IE9 and higher and other web browsers.(it the w3c standard
(recommendation).
Post questions about html, css and scripting for website developers to the MSDN IE Web Development forum. Include with your question a link to your website or a mashup that shows the issue.
Rob^_^

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

MOSS 2007 native mode on SQL 2012 with compatibility mode?

We are on MOSS 2007 SP 3 64-bit (just native, it is not SSRS integration mode) running on SQL 2008 R2 SP2 64-bit. Can the databases move to SQL 2012 with compatibility mode?

Hi,
As far as I know, SQL 2012 is not listed as compatible with SharePoint 2007 on the
technet articles. If you want to upgrade to SharePoint 2010, then you can move the databases and upgrade the database. If you just want to use SQL 2012 with SharePoint 2007, I think it is not applicable.
For more information, please refer to these sites:
SQL Server 2012 not supported on WSS 3.0/MOSS 2007 and versions previous than SharePoint 2010 SP1:
http://blogs.msdn.com/b/calvarro/archive/2012/04/27/sql-2012-not-supported-on-wss-3-0-moss-2007.aspx
SQL Server 2012 support:
http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/02fd7238-9cc2-43fc-a46c-afbfca21210b
Thanks,
Entan Ming
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
Entan Ming
TechNet Community Support
Will it work with the database set with the compatibility mode ?
/* Server Support Specialist */

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store.

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store. Please help.

Why not? What, if any, errors are occurring when trying to access the itunes store?
Is iTunes actually installed?

First time user..problem with compatibility mode

Similar Messages

Maybe you are looking for