First time using ical. Adding an invitee and ical does not accept address

First time using ical. adding invitee and ical does not accept address

CHRIS A123,
Welcome to Apple Discussions.
1. Quit iCal, and open System Preferences...>Language & Text>Formats>Region:>reset/choose the appropriate region...also check what you have set in Dates/Times
2. If that is unsuccessful, I also recommend using the Mac OS X v10.6.2 Update (Combo).
;~)

Similar Messages

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtns

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials

I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials. How can I get the correct icloud icon

What Mac OS X do you have? ICloud requires 10.7.2 or higher. Then the iCloud icon is in System Preferences.

I constantly get asked for my PW in Mail...and it does not accept it...

I constantly get asked for my PW in Mail...and it does not accept it...

That's the reason, the servers are a bit busy right now but not folding.
http://www.apple.com/support/icloud/systemstatus/

First time user of Mac(Book Air) and mouse sensitivity not high enough

First time user of Mac(Book Air) and one thing that has bothered me is when I use a generic USB mouse and I've set the tracking speed/sensitivity to the max and it's still not high enough and it just irritates me to no ends. Am I not doing something properly being a first time mac user? Thanks in advance for any response.

Depends on the mouse. "Laser" with shorter wavelengths are far too sensitive for me and need to be dialed down. IR is worthless in my opinion because they cannot move properly across a black/white checkerboard.
I actually (to my great surprise) love using the trackpad and hate to use the mouse because trackpad keeps my thumbs directly between my hands while typing. But that is just me.

I am not able to access my Ipad as it says that icloud has not been backed up and it does not accept when i click ok

i am not able access my ipad as it says that the icloud has not been backed up. it also does not accept when i click ok.

Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When it's rebooted you can force a backup via Settings > iCloud

Ical-Running OSX 10.8.2 ical does not accept participants

Running OSX 10.8.2; If I would like to add participants I can choose them from my contact list, however if I accept a name the email address does not appear in the participant "field". I am using icloud - maybe here is the problem? Can anyone help?

same issue with same system specs. Google Chrome and Safari download the files just fine. Firefox used to dowmload files fine.

My iMac 2006 had a crashed Lion and now does not accept any Lion installation.

Hi
I have tried to install my Lion from an external drive. This drive has basic Lion on it and runs great with my iMac.
However installing the Lion on my iMac fails constantly. I have reviewed the installation protocol and can not find a clue. It seems as if the drive was wrong but the disc checker does not find a clue when it is empty. I did several partition processes and deleted it with various methods. However a volume of 310 MB was always left, although hidden to me.
When I checked the protocol some errors occur. I can not judge, which critical at all. However this ReportCrash could be a hint.
Oct 11 04:58:02 localhost ReportCrash[2392]: Process:         update_automator_cache [2391]
Oct 11 04:58:02 localhost ReportCrash[2392]: Path:            /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache
Oct 11 04:58:02 localhost ReportCrash[2392]: Identifier:      update_automator_cache
Oct 11 04:58:02 localhost ReportCrash[2392]: Version:         ??? (???)
Oct 11 04:58:02 localhost ReportCrash[2392]: Code Type:       X86-64 (Native)
Oct 11 04:58:02 localhost ReportCrash[2392]: Parent Process: sh [2390]
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Date/Time:       2013-10-11 04:57:58.123 -0700
Oct 11 04:58:02 localhost ReportCrash[2392]: OS Version:      Mac OS X 10.7.5 (11G63)
Oct 11 04:58:02 localhost ReportCrash[2392]: Report Version: 9
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: VM Regions Near 0:
Oct 11 04:58:02 localhost ReportCrash[2392]: -->
Oct 11 04:58:02 localhost ReportCrash[2392]:     __TEXT                 000000010e546000-000000010e549000 [   12K] r-x/rwx SM=COW /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache [/System/Library/Frameworks/Automator.framework/Versions/A/Support/update_autom ator_cache]
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Application Specific Information:
Oct 11 04:58:02 localhost ReportCrash[2392]: objc[2391]: garbage collection is ON
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
The installation finally stopped progressing, so that canceld the programm by cmd+Q.
Last entry in the protocol is:
Oct 11 05:29:02 localhost Unknown[328]: 2013-10-11 05:29:02.968 Mac OS X Installer[346:b403] File creation failed /Library/Logs/DiagnosticReports/Installer_2013-10-11-052902_localhost.diag - uid: 0 gid: 0, euid: 0 egid: 0 - error 30: Read-only file system
I hope to add the complete protocol for your review.
Regards
Tom

Hi
The problem was a hard drive with a bad storage area.
I replaced the hard drive with an external drive and boot the OS X from there.
Now all is good.
That was solved a year ago.
Thanks for being patient.
Tom

I worked for a company that closed down and inherited an ipad 2 linked to Vodafone uk as the carrier but no account details. So I factory reset, downloaded the ios7and added EE sim and Ipad does not work. what can I do? Voda/EE/Apple say NO SOLUTION?

I inherited an Ipad 2 from a company that I had worked for in the UK but had closed down.
It was an IPAD2 locked to the Vodafone UK network by a Vodafone SIM Card.
No account details were or are available for the original account.
So I removed the Vodafone SIM Card and then factory reset wirelessly using my wireless at home.
I updated the system to IOS 7.0.2.
I was then sold under a contract from EE another UK carrier a SIM card for the Ipad and when inserted the Ipad says Sim not applicable.
I checked with Vodafone and EE shop and they said they cant unlock it, I checked with Apple who said the same!
So I have an IPad I can use wirelessly at home, a sim card from EE which is an u
locked Vodafone carrier mode and all 3 multinational companies say they cannot unlock it from Vodafone to enable me to use the EE sim.
What can I do to sort this mess out? Please help!
Thank You

Steve, have you tried just going through the unlock form here?
http://www.vodafone.co.uk/vodafone-uk/forms/unlock-code-request/
That's what the moderator in several older threads in Vodaphone's forum said was all that is necessary. Carriers often won't unlock for anyone but the original account holder, so if you don't have the details of the company's account, that might be the barrier in which case there will not be any way to get the iPad officially unlocked.
Good luck.

First time using "Nokia N8 Ovi Map"

hello,
im first time using my n8 ovi map, and i wonder why it took hours for checking for my position,
after 2-3 hours of waiting, it still searching for my position. instead of keep waiting, i switch to walking mode, and set a destination, now it shows "waiting for GPS". i have been waiting for more than 1 hour, sadly it still showing "waiting for GPS". Anyone experiences this problem before? please provide me some solutions. thanks.

@NokiN8Silver
Welcome to the forum!
You might try as a temporary measure going to Menu > Settings > Application settings > Positioning > Positioning methods - only enable Integrated GPS then go outside away from tall buildings and it should lock on to satellites within 20 -30 minutes; once position established subsequent satellite lock on will be much more rapid.
Happy to have helped forum with a Support Ratio = 42.5

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I accept the Terms and Conditions when trying to set up an Apple ID for the first time ( using my iphone)?

I am trying to create an Apple ID by using the Itunes icon on my iphone 5s for the first time. It opens up a screen with the 54 pages of Terms and Conditions and it does not allow me to even accept the Terms and Conditions... no Accept option or place to click!
The only option is to Send the terms and conditions via email... which also does not work...it keeps asking me to "try again"... Has someone else had this problem?

Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

First time using ical. Adding an invitee and ical does not accept address

Similar Messages

Maybe you are looking for