First time using iDVD for slideshow, need some guidance

I want to make a dvd that consists of 3-6 slideshows, plus "extras". Each slideshow will have 50-150 photos, but the "extras" section I want to have all the photos (including some not used in the slideshows) for a total of about 1300 photos.
1. How do I get the photos not used in the slideshow in the "extras" section?
2. Can I put anything in the "drop zones"? or does everything just go in the "slideshow" section?
This is the first time I have ever used iDVD and could use any help or suggestions at all.....
thanks

Don't use over 99 images in a slideshow. You may have trouble:
http://docs.info.apple.com/article.html?artnum=302961
1. Just create a new extras slideshow menu from the main menu by using the + button and select Add Submenu. Then go there and add slideshows the same way, only select Add Slideshow and then drag your images in; or use the Import funtion.
2. Drop Zones are for single images/movies.
I think you need to spend some time learning how to do this, rather than guessing.
iDVD 6 Getting Started PDF download
Apple's iMovie Learning Site
Apple's iDVD Learning Site
iLife ’06 Multimedia Tutorials
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

Similar Messages

First time using iDVD

I have iLife 05 and I am finally getting around to doing all the cool stuff I am capable of with my MAC.
I have a few questions hopefully some people out there could answer.
1. When I want to create a DVD, can I use photos from iPhoto and/or home videos?
2. This one is for iMovie. Same question I guess, can I use individual photos from iPhoto or do I have to create a slideshow first?
Thanks and any help anyone provides is greatly appreciated.
I can't wait to get playing around!
Chris

Hi Chris:
1. Yes- you can use photos from iPhoto or from anywhere on your mac. And, you can import DV Tape video directly into imovie with a 4-pin to 6-pin firewire cable.
2. The same goes for imovie. And, you can build a slideshow right in imovie with individual photos or in iPhot and import from there. BTW-you can do the same in iDVD.
Now, may I suggest watching the iMovie Tutorals and downloading the PDF files?
See the iMovie tutorials (in html and QT movie form) at:
http://www.apple.com/support/imovie/
(Scroll down a bit)
http://www.fsdb.k12.fl.us/rmc/tutorials/ilife.html
See the iMovie tutorials (in pdf form) at:
http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
http://manuals.info.apple.com/en/iMovieLesson1.pdf
http://manuals.info.apple.com/en/iMovieLesson2.pdf
http://manuals.info.apple.com/en/iMovieLesson3.pdf
http://manuals.info.apple.com/en/iMovieLesson4.pdf
http://manuals.info.apple.com/en/iMovieLesson5.pdf
http://manuals.info.apple.com/en/iMovieLesson6.pdf
http://manuals.info.apple.com/en/iMovieLesson7.pdf
See the iDVD tutorial at:
http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
http://manuals.info.apple.com/en/iDVDTutorial.pdf
Not all of these are iLife 05...but you will get the idea.
Sue

First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show client. But it comes in blank (white) but file size is 1.8mb. help!, First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show

Have created a web design using Master Pages. 5 pages in all. When I try to create a proof with pdf or jpeg the result appears blank (or white). How do I create something that I can send my client?

Hello all,
I appreciate your willingness to help.
Did a test. Copy and pasted a page of my graphics into a new indd file and into a new master. New file works fine for exporting jpeg as well as pdf.
Must just be something wrong with the original. gremlins. No time to wonder why.
but....Thank you again.

HT1325 Just brought the MacPro and first time using iTune and Yes I authorized the computer. But for a few purchased songs, only 30 seconds of the song plays and for one song off an album, a pop comes up saying I need to authorized the computer, but it is

Just brought the MacPro and first time using iTune and Yes I authorized the computer. But for a few purchased songs, only 30 seconds of the song plays and for one song off an album, a pop comes up saying I need to authorized the computer, but I do this and it says it is authorized already. I click on the song to play it and this process repeat (saying it is not authorized, then saying it is already authorized)

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using" cannot even charge it

My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using" cannot even charge it. Have offed and on several times, but same result. Any help on this.

To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures

My second brand new iphone 6 when charging for the first time gets the message "iphone needs to cool down before using" cannot even charge

My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using". I cannot even charge it. I offed it and on it several times, still the same message keeps on coming.

To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures

HT5622 how i can active my apple id in first time?does it have need to gift card for activity?

how i can active my apple id in first time?does it have need to gift card for activity?

Either add a credit card or maybe another payment method will work
or
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

SQL Server Management Studio - Configuring the environment for first time use

Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
Thanks

Hi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK

X230 - Setup Is Preparing Your Computer For First Time Use

Dear all,
I just received my X230 bought on Ebay and as I first turned on the computer, Windows was frozen and showed "Setup Is Preparing Your Computer For First Time Use" for hours (I guess its a whole day). Since I do not have any recovery media provided, does anyone has alternative solution?
Thanks in advance!

Thanks! It took me a whole day to figure out what happened and I ended up format the whole drive and reinstall the windows. Yes, you are right, X230 is a good machine and acutally I was thinking to puchase X240 since there is kind of back to school program that you can purchase X240 at a deep discount price. After so many bad comments I chose X230 instead for:
1. Physical Trackpad button (which is extremely important as I ONLY use trackpoint)
2. 2 ram slots
3. normal voltage CPU
I am surfing the net with X230 and I am so happy I bought this.

First time using external hard drive for backup of computer....

First time using external hard drive for backup of computer....it asks "Do do you want to erase disk?" In order to proceed, I have to say "yes" ... is that what I want to do? ...Seems like I'm skipping a step...

To use Disk Utilities, attach the drive, open Finder > Applications > Utilities > Disk Utilities and then highlight the LaCie drive in the left panel of the DU window. In the right panel, choose the Partition button top center of the pane. Then decide how many partitions you want on the drive, one is just fine.
Then choose the format, the default is Mac OS Extended (Journaled) which is prefered.
Then name the partition or drive.
Then choose the partition table, the default is GUID which is prefered.
Then Apply and you will get to confirm that you want to erase and format the drive.
Quit DU and you are ready to go.

Hi, how many hours should I charge my iPhone 5 for the first time use?

Hi! How many hours should I charge my iPhone 5 for the first time use?

However long you like. There is no help or harm in charging it for a given amount of time.

Help.. First Time Using DVD Studio Pro!!

OK .. this is my first time using DVD Studio Pro. Before this I have always used IDVD for my Final Cut Projects, but I now need to branch out!
I've hit a bit of a brick wall. I've watched the video tutorials and tried to read the instruction manual, but it's heavy going!!!.. can someone help me get over the hump?
Here's where I've got to:
- In my Assets tab I have my two file - Test.mov QT Video File and Test.mov QT Audio file. Both are yellow uncompressed video. I also have a templates folder.
- I chose the template called brush cover which I can see under the menu tab on a window. If I go to that same window and select the graphical tab I can see a menu 1 and track 1.
- In my timeline I have dragged my Video and adui assets over and can see them and actually play the movie.
- What is also worth mentioning is that I can also see the 18 chapter markers that I created in FCP.
- Now I hit the brick wall!!.
- Back in my menu I see 8 buttons. In my timeline I have 18 chapters. How do I transfer my 18 chapters over to my menu so that I have 18 buttons each one representing a chapter?
- I'm sure that it's obvious and a silly question.. but for a rookie like me who's trying to figure this out from scratch it's not easy!
Thanks for any advise!!.. also if anyone has a good 'idiot's guide' for ex iDVD people moving to DVD Pro then I'd really appreciate it!
Many Thanks!
Steve.
-

Steve
Back in my menu I see 8 buttons. In my timeline I have 18 chapters. How do I transfer my 18 chapters over to my menu so that I have 18 buttons each one representing a chapter?
You can duplicate your 8 buttons menu so many time as you need to include your 18 chapters, creating a simple new button to navigate through Chapter Menu1, Chapter Menu2, etc.
Or you can duplicte&resize buttons to fit more of them in a single menu, but 18 button chapters could be too much for a comfortable navigation.
Thanks for any advise!!.. also if anyone has a good 'idiot's guide' for ex iDVD people moving to DVD Pro then I'd really appreciate it!
You can use the Search feature in this forum and almost for sure you'll find any answer you need, in particular for basic stuff.
You can visit Drew13's site [DVD Step by Step|http://www.dvdstepbystep.com] for some good tutorials, and Drew13 uses to stay tuned here to help you too!
And sometimes Google helps too !
Hope that helps !
Alberto

First time using imovie

hi, its my first time using imovie and i'm very impressed by this prog. i'm able to figure out how to insert music.... fonts...etc...etc.... but i just cant figure out how to insert photos!!!! horrible!!!
Currently i'm creating my movie using one of the themes in the program. Everything's done except inserting picture's in those grey boxes.
How do i do that?
Please help!!!
A million Thanks!!!
Message was edited by: sistawen

It took me some time to spot the link to where the instruction manuals were for imovie, take a look it might help you and any other users (including myself) in using the software.
Here's the link http://www.apple.com/support/manuals/imovie/

First time using "Nokia N8 Ovi Map"

hello,
im first time using my n8 ovi map, and i wonder why it took hours for checking for my position,
after 2-3 hours of waiting, it still searching for my position. instead of keep waiting, i switch to walking mode, and set a destination, now it shows "waiting for GPS". i have been waiting for more than 1 hour, sadly it still showing "waiting for GPS". Anyone experiences this problem before? please provide me some solutions. thanks.

@NokiN8Silver
Welcome to the forum!
You might try as a temporary measure going to Menu > Settings > Application settings > Positioning > Positioning methods - only enable Integrated GPS then go outside away from tall buildings and it should lock on to satellites within 20 -30 minutes; once position established subsequent satellite lock on will be much more rapid.
Happy to have helped forum with a Support Ratio = 42.5

First time using iDVD for slideshow, need some guidance

Similar Messages

Maybe you are looking for