First Try OC i7 920 D0 with X58 Pro-E
I picked up a smoking deal on CL for a slightly used i7 920 IBUYPOWER rig with 22" 1080 monitor for a cool $1000. It was already OC'd to 3.2, but got wiped when I did a bios update yesterday.
So i jumped in and had to crash course OC'ing with the aid from some great articles I found here on the forum.
Especially the discussions here https://forum-en.msi.com/index.php?topic=128637.0
and here https://forum-en.msi.com/index.php?topic=134941.0
I followed along the some of the steps listed above and increased all the way up to 3.8-3.9 ghz stable. http://valid.canardpc.com/show_oc.php?id=1234817
Anything above that im not to comfortable with (yet).
Idle Load
Settings:
BCLK 181 @ 21
Vcore +.030 aprx 1.256
Mem Voltage:1.60
Mem Ratio: 4
Mem Freq: 1448
Uncore Ratio: 10
Uncore Freq: 3620
Tips from article: https://forum-en.msi.com/index.php?topic=128637.0
My questions are how to get the mem up closer to the 1600 from 1448? If i increase the Mem Ratio to 5 then it bumps to 1880! Im not to sure how to increase further without increasing the BCLK further. Im stuck on this point.
Other concerns is the IOH: 80c at idle and 85c under load.
Please post any thoughts on my first attempt....Cheers!
Quote from: HU16E on 11-June-10, 02:33:29
Rather than try to mess with bclk to get 1600 on the RAM, 1448 is so close, I doubt 152 more would add a FPS. Your best gain would be trying to tighten the timings some. Maybe try 8 8 8 21 60 tRFC 1N @ between 1.62-1.65V's.
Really? You can do that even if they are 9-9-9-24 chips?
Quote
Unless you want to tear the board apart to change the TIM on the IOH heatsink, I doubt your current IOH temp will ever be an issue unless it goes above 95C tControl on a continual basis at full load. An Antec Spot Cool works well.
Whew that's good to know, i really don't want to tear into it. I saw the references to the Spot Cool, will have to pick one up.
Quote
For your Uncore Ratio, I would pair it up with the Mem. Ratio at 4/8 rather than 4/10.
Awesome will give it a go. Thanks!
Similar Messages
-
# CPU: Intel Core i7 920 Nehalem 2.66GHz
# Motherboard: MSI X58 Pro LGA 1366 Intel X58
# Memory: CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333
# Video Card: SAPPHIRE 100270SR Radeon HD 4850 X2 2GB
# Power Supply: Thermaltake Purepower 800watt
# Sound Card: X-Fi XtremeGamer Fatal1ty Pro Series
Hello. Starting about 1 month ago I've been experiencing this issue. I can be just cruising the internet watching youtube video and listening to music then the computer will freeze and this loud screeching sound would come out of my headphones (and scare the crap out of me). This issue never occurred while I was playing any PC games until recently.
Yesterday I was fed up with the issue so I pulled open the case and cleaned every fan out (which I do every couple of weeks). Now the issue seems to be occurring while playing video games or listening to music. All the fans appear to be functioning properly and I don't believe it could be heat related because I have the Antec 1200 case which has 6 case fans. I've run PC Wizard 2009 and SystemFAN while playing some games and none of the temperatures I saw look too extreme.
So I'm suspecting it could be the RAM, soundcard, PSU, or motherboard but could use some more assistance before I start RMAing it.Quote from: Blaise on 29-September-09, 04:08:16
I'd be inclined to blame the Creative drivers for your sound card first. Try updating (or if necessary, downgrade) the drivers and see if it makes any difference.
I actually pulled out the sound card an hour or so ago and removed the drivers. I'm running on onboard audio and the system just randomly restarted while I was talking to people on Ventrilo. -
Overclocking I7 920 DO and X58 Pro mobo
Hello guys would be very greatfull if someone could please help me. I have just purchased the I7 920 DO and an X58 pro mobo and im a noob at overclocking the only overclocking ive ever done was with basic programs ie Ntune.Ive read hundreds of forums and im still none the wiser my head is spinning.I would like to no if anyone could give me a list of were everything should be ie base clock and so on. Im not after a big overclock between 3.2 and 3.6 would be ok for now ive read on some forums you can leave everything as it is for about 3.4ghz and just increase the base clock is this true it also states this in this months pc format magazine.Ive checked with everset and my idle cpu temp is between 27 and 34, core 1 is 46, core 2 is 44, core 3 is 47, core 4 is 42, i havent checked these on full load, also in the oc program that came with the mobo everything keeps changing the cpu speed goes from 1.6ghz up to 2.9ghz this is also the case with everest and the oc program alarm on the system 3 fan keeps going off even though there is no fan installed in that socket and it reads 0 any advice and suggestions would be greatfull thanx.
The fluctuation you see in speed, is the power saving features in the system. Not to worry, that is normal. Make sure 'Spread Spectrum' is disabled. In 'Advance Bios Features' 'CPU Features', disable all except 'Hyper Threading'. Change 'Mem. Ratio' to 4, 'Uncore Ratio' to 8, 'Advance DRAM Config,' set 1N 9 9 9 24, change base clock to 166, disable 'Extreme Mem. Profile', leave other settings 'default' or 'Auto', & check for post. That should get you around 3.33 & mem. around 1333.
I'm a little curious on your memory modules. What voltage do the they say they run at? If not 1.5v-1.65v, they are the wrong modules for your system. Most i7 X58 RAM is also triple channel 3X2G sets at a max. of 1.65v's. -
Freezing up with x58 Pro and G.Skill DDR3-1600 RAM
I just recently updated to BIOS version 7.1. When I tried to use the "Extreme Memory Profile" or XMP in order to have the mainboard recognize the RAM at it's rated speed, my system became unstable and quickly freezes after boot up. I have G.Skill DDR3-1500 PC3-12800 (CL9-9-9-24) RAM, Core i7 920, MSI x58 Pro. The only setting that recognizes my memory and allows my computer to run with stability is when the RAM is "underclocked" to 1333Mhz. Any tips on how I can get the mainboard to run my memory at it's rated 1600Mhz speed without my computer crashing? Any advice would be greatly appreciated!
Hi panetrez & welcome to the forum. Welcome to the world of 'rated' but in reality slower chipped memory modules. In many tests, RAM at 1066 against RAM at 1333, or even 1600, was only around 1-2 FPS different. System performance I believe, gets it's biggest boost from CPU speed & the quality of the VGA card.
The 'sticky' on initial 1066 memory speed is correct with Eclipse & Platinum, but the X58 Pro, if 1333 or higher rated memory is installed, does set the RAM at 1333. This was proven on two recent builds I was involved with. One had 1333, & the other 1600, & both ran at 1333 at boot-up. Both of them also initiated with 6.4GT.
If you would still like to run your RAM at 1600. Start a new thread in the 'Overclocking & Modders Corner' of the forum. Some adjustments in the bios will be required. -
I7 920 Overclocking in X58 pro-e Vcore Jump during prime 95
Good evening, I'm trying to overclock my i7 920. My default Vcore is 1.13 in BIOS, my Ram is Corsair 1600MHz and my cooler is Thermaltake ISGC-300. I have adjusted BCLK to 160, multiplier to 20, VRAM to 1.60V and Vcore to 1.16. When I'm on windows CPU-Z reporting Vcore 1.16V, but when running prime 95 constantly jump between 1.44 and 1.52V. Also tried multiplier x21 and the reported Vcore in windows was the same(1.16), when running prime95 jump to 1.22. Why the Vcore isn't stable? Also without overclock my tRFC was 88 clocks and now is 153 clocks, how i can decrease it? I tried to pull the BCLK to 170 but the memory with ratio 5 jump around 1700MHz, how is possible to raise my clock and keep my memory in 1600MHz? Thanks in advance
Quote
Why the Vcore isn't stable?
Is VDroop (LLC) set to Auto or High? It will always move around as the load changes. Just try to keep the CPU V. from exceeding for that particular CPU model, 1.45v's under sustained load. Some of the X58 CPU's are limited to 1.4v's, so recommend to check the latest Intel datasheets for the latest information about that.
Quote
Also without overclock my tRFC was 88 clocks and now is 153 clocks, how i can decrease it?
Set the DRAM Mode to Linked, adjust it in Advance DRAM Configuration.
Quote
I tried to pull the BCLK to 170 but the memory with ratio 5 jump around 1700MHz, how is possible to raise my clock and keep my memory in 1600MHz?
You have to use bclk & Memory Ratio/Uncore Ratio settings. Obviously, bclk of 200 & a Mem. Ratio of 4 (Uncore set to 8) = 1600. If it is stable at RAM speed of 1700, why worry about it? Speed doesn't matter, the voltage applied to make it work matters more.
-
Help with Overclocking my i7 920 on X58 Pro-E
Can someone please give me some step by step instructions on how to overclock my i7 920 on my X58 Pro-e board? I have the following specs- X58 Pro-E, i7 920 co stepping, H50 hydro cooler, 6 gigs Corsair 9-9-9-24 1600, GTX460-SE 1Gig, OCZ Stealthxstream 600 watt, 1 tb Western Digital, running Vista home Premium 64 bit.
I have been able to get it to 3.6 but after that I have problems with the memory I think. But I think it should be able to do much better if the voltage and or timings were set correctly.
So if you guys can walk me through it that would be great. Thanks JohnDear John,
Your initial posting did not contain any information as to what you had tried to achieve in terms of Overclocking your system, neither does it indicate that you had made any attempts at trying to gather information in terms of general OC'ing for the i7/X58 platform. These are normal processes one would go through before having an expectation of someone dishing out a "magic formula" that will give you what you want in terms of an OC. OC'ing a system must start with a reason for wanting to do so. i.e. faster gaming, higher theoretical benchmarks, improved video rendering times, increased folding performance, experimentation or just plain an ego trip and being able to post a nice number somewhere.
Your reasons of wanting to do a higher OC are unknown and quite frankly have got nothing to do with us. You decided on a Sunday to do some OC'ing and it seems after some frustrating time, gave up and came to the forum. Now being a weekend, and this forum being monitored by users just like you, most forum users were probably having their Sunday BBQ and relaxing,oblivious to the fact you were out there crying for help. Some people actually do have other things to do than just sit in front of the PC to wait for someone like you.
Anyhow, come Monday, people are off to work and will probably have some spare time during or after work to see if they can be of assistance with users posing specific questions regarding their rig combinations and the exact detail of what has been done to get around the problems.
Your patience was obviously tested by that time and you start your next post with a "not so nice" set of assumptions and statements.Quote
Well it looks like no one wants to help or can't!
Quote
I think I will just sell my MSI board and buy a Gigabyte or Asus as they seem to have a much better forum with people that have the seem boards and are willing to Help!
Quote
Last MSI product that I will buy.
This put some questions in my mind regarding your homework in terms of your decision to acquire the combo you did. Was it a spur of the moment decision or was some research conducted in terms of the hardware selection based on comparing reviews and visiting the forums beforehand to establish if the intended hardware does actually satisfy the targeted/expected outcome.
The first thing you do is to threaten other users of MSI products that you will sell your board to buy something else.
A bit of searching on the net regarding general OC'ing would have given you enough information to establish the basics. Once those don't work out for you, then the time comes to state those and request assistance.
If you search this forum you will find hundreds of threads where the best advice in the world has been provided because the person wanting assistance has provided a bit more detail than you have, with a clear indication that they actually did do some effort in terms of research.
In order to assist you, perhaps you could start anew by providing your current BIOS settings and posting screenshots of your CPU-Z memory and SPD tabs. That's always a good place to start. You may be surprised at the amount of advice forthcoming when people can see the whole picture... -
X58 Pro BIOS Crash during Boot
Hi All,
I have recently assembled a system with X58 Pro board and Core i7 920. It was working fine for 3 months except that it started having BIOS crashes since last night. The issue is that the mainbaord lights would be on without the POST screen and within few seconds the system resets automatically. The same procedure happens for about 4-6 cycles and on the 7th cycle i get a message on screen saying the previous overclocking has failed and the BIOS is reset to default settings. Post then the system boots up normal and works just fine. But once the system is shut down and when the system is switched on(cold boot) I get the same problem. I have also noticed that a month back the CPU clock had jumped from default 2.66 to 2.67 automatically without any overclocking and just couple of weeks after that the clock rose up to 2.87. It has remained like that until the BIOS crash issue. All these happened without any manual overclocking. I was wondering how can this happen automatically unless the clock speeds are adjusted manually. That was quiet strange though. Neways after this issue(BIOS Crash) popped up the clock speed is back to 2.67 than the default 2.66. Weird again. The BIOS version is the default one(V7.0) that was shipped with the mainboard. I tried to M-Flash the BIOS to V7.3(after reading couple of postings from the forum) but without success. The same problem still persists. I have done the following things after going through the forums regarding the issue.
1. Cleared CMOS using the clear CMOS button(With power chord unplugged)
2. Tried M-Flashing to V7.3 (Not sure whether the BIOS was updated during the process)
I kindly request all of you so provide some solutions so as to get my system back to normalcy. Your worthwhile suggestions would be really appreciated. The system config is mentioned below
Core i7 920 @ 2.66 GHz
MSI X 58 Pro - BIOS Version 7.0
Corsair 6 GB(3 x 2 Gigs) DDR3 @ 1066 MHz (installed on the black slots currently)
EVGA GeForce GTX 295 1.7 GB GDDR3
Tagan 1100 W PSU
2 x 1 TB Seagate Sata HDD @ 7200 RPM w 32 MB cache
Sony Optiarc DVD-RW Drive
Windows XP 64Bit SP2
Looking forward for some positive solutionsHey NovJoe,
Thanks a lot for your reply. I have done as per your suggestion and the system works fine now. Pretty interesting though. During the individual RAM tests i did not face any BIOS crashes and i thought the MOBO DIMM SLOTS would be faulty. So i installed the second RAM strip on the second slot worked fine and finally the third one and works fine too. I am really wondering wht had happened in the first place. Was that due to any dirt or dust in the memory and DIMM contacts? Well neways i am kinda relieved now. But i wanna make sure that everything works fine. What types of tests do you suggest to make sure that the system is working almost fine??
Thanks a lots
Regards
Rahul -
TRUE BLU-RAY AUDIO - X58 Pro-E very important question !
I have a problem.
I want to buy a motherboard with X58 Pro-E and build HTPC HD Audio.
What does this mean "TRUE BLU-RAY AUDIO" ?
There is no HDMI output, only S/PDIF !!!!!
- There is no HD audio bitstream (DTS-HD MA/TrueHD) - no HDMI !!!
- Does not decode HD Audio -> LPCM 7.1 - no HDMI !!!
- That decodes the HD Audio (7.1) to analog?
- If only decodes HD from Blu-Ray Stereo (via. SPDIF)?
What does this mean "TRUE BLU-RAY AUDIO" on MSI motherboard ?
Regards.
HerrMan>> TRUE BLU-RAY AUDIO <<
• The loss-less content protection technology with full-rate audio enjoyment from Blue-ray Disc
• Support for 24-bit / 192kHz sample rate offers high quality digital decoders and speakers
• support 7.1 channels playback, plus 2 channels of independent stereo sound output (multiple streaming) through the front panel stereo outputs
There is no HDMI because there is no onboard video. The video card you get would need to have HDMI output.
LPCM: Linear Pulse Code Modulation. It is an algorithm used to convert analog audio to digital. It gives pure loss less representation of the original analog audio in digital.
7.1 is the latest in speaker configuration. Mono is one speaker, stereo is two, 5.1 has 5. The problem with 5.1 is it produces angled audio. To get the best out put you have to sit in the center and all speakers have to be placed the right way. 7.1 solves those problems, even if the speakers are not perfectly aligned you still get very good results.
S/PDIF-out JSP1 on MB connects to video card for HDMI sound.
Download the manual >> here << and browse through it. -
CPU: Intel Core i7 920
Motherboard: MSI X58 Pro LGA 1366
Memory: OCZ 6 GB (3 x 2 GB) 240-pin DDR3 13333 (PC3 10666) SDRAM
Video Card: nVidia 9800 GTX+ 512 MB
PSU: Rosewill RP600V2-S-SL-S 600W
I just received all my parts today and I set everything up. I'm fairly certain that I put every power cord in the right spot. I have the CPU, heatsink and fan, three RAM modules, video card, two SATA hard drives, one SATA DVD drive, and the PSU hooked up. The LED power light on the motherboard lights up, but when i press it, nothing happens. When I press the on button on my case, nothing happens either. The fans don't start, it doesn't post - it seems completely dead.
Does this seem more like a motherboard problem, or a power supply problem? Maybe one of them was dead on arrival? Thanks in advance for you help!Tried what you suggested - nothing.
Minus the lone green LED light on the power button on the board itself, there really is no other indication that there is any electricity. Yes, there is a power button on my power supply, and it's turned on. I can tell when the power's on, because when i have it unplugged, the LED light goes off. It's just weird that electricity is getting to the light, but no other part of the motherboard...
If i did connect something wrong, which is possible, do you have any suggestions of what it might be? My power supply has a 20 + 4 pin cable, and i connected the 4-pin on pins 12-24 (closer to the top of the motherboard) and the 20-pin closer to the SATA connectors. That's what the directions said to do. Other than that, I connected two 4-pin cables right to the left of the CPU, in order to power the CPU. Those are the only power cables that connect directly from the PSU to the motherboard. -
First try with ALV Grid and Abap Objects
Hi,
this is my first try to write a simple report which just reads a textfile and display it in an ALV Grid. As a basis, I used some examples from SDN, but it did not work as expected
I would like just to use a docking container. I do not need a separate area for the ALV Grid. The report gives no syntax errors, but it just display the report title, nothing else. SAP R/3 Release is 4.7. Below is the source code of the report. Any idea what is missing?
*& Report Z_PLAN_TEXT_UPLOAD *
REPORT z_plan_text_upload.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_dynnr TYPE sy-dynnr,
gf_repid TYPE sy-repid.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Local Class Definition
* Local Class Implementation
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
SKIP.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SKIP.
PARAMETERS:
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn.
SELECTION-SCREEN END OF BLOCK b1.
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
gf_dynnr = sy-dynnr.
gf_repid = sy-repid.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog
CHANGING gt_fieldcat.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
* PARENT =
repid = gf_repid
dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
* RATIO =
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid IS INITIAL.
CREATE OBJECT go_alv_grid
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid is initial
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Kostenstelle' .
ls_fcat-seltext = 'Kostenstelle' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalogI have added some more functionality to my report. The good thing is, the report works as it should.
BUT, I'm not really sure, whether this is a good (correct) design. The report works the following way:
1. Read planning data form text file into internal table
2. Display the internal table
3. Convert the data and display the converted result
4. Post the converted data to the system
5. Display log with messages
The main thing is, I would like to know, do i really need two dynros, to display the two different internal tables or is it possible just to use one ALV-Grid? I was not able to find another solution. Any comment or help to the report is appreciated.
*& Report Z_PLAN_TEXT_UPLOAD_TEST *
REPORT z_plan_text_upload_test.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_okcode TYPE ui_func,
gf_balloghndl TYPE balloghndl.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
go_alv_grid_0200 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungsposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Bapi Strukturen
DATA:
gs_headerinfo TYPE bapiplnhdr,
gt_indexstructure TYPE TABLE OF bapiacpstru,
gs_indexstructure LIKE LINE OF gt_indexstructure,
gt_coobject TYPE TABLE OF bapipcpobj,
gs_coobject LIKE LINE OF gt_coobject,
gt_pervalue TYPE TABLE OF bapipcpval,
gs_pervalue LIKE LINE OF gt_pervalue,
gt_return TYPE TABLE OF bapiret2,
gs_return LIKE LINE OF gt_return,
gt_control TYPE TABLE OF bapipcpctrl,
gt_totvalue TYPE TABLE OF bapipcptot.
TYPES:
BEGIN OF gy_bapi_input,
version TYPE versn,
* perio TYPE co_perio,
fisc_year TYPE gjahr,
coobject(10) TYPE c,
cost_elem TYPE kstar,
wkgbtr01 TYPE wkgxxx,
wkgbtr02 TYPE wkgxxx,
wkgbtr03 TYPE wkgxxx,
wkgbtr04 TYPE wkgxxx,
wkgbtr05 TYPE wkgxxx,
wkgbtr06 TYPE wkgxxx,
wkgbtr07 TYPE wkgxxx,
wkgbtr08 TYPE wkgxxx,
wkgbtr09 TYPE wkgxxx,
wkgbtr10 TYPE wkgxxx,
wkgbtr11 TYPE wkgxxx,
wkgbtr12 TYPE wkgxxx,
END OF gy_bapi_input.
DATA:
gt_bapi_input TYPE TABLE OF gy_bapi_input,
gs_bapi_input LIKE LINE OF gt_bapi_input.
* Anwendungs-Log
DATA: gs_balsmsg TYPE bal_s_msg.
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SELECTION-SCREEN SKIP.
PARAMETERS:
gp_kokrs LIKE coep-kokrs,
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn,
gp_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
* Local Class Definition
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar_0100 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0100 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm,
handle_toolbar_0200 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0200 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
* Local Class Implementation
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar_0100.
PERFORM handle_toolbar_0100
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0100.
PERFORM handle_user_command_0100
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
METHOD handle_toolbar_0200.
PERFORM handle_toolbar_0200
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0200.
PERFORM handle_user_command_0200
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
ENDCLASS. "lcl_event_handler IMPLEMENTATION
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
PERFORM create_log.
gs_return-type = 'I'.
IF gp_test = 'X'.
gs_return-message = text-010.
ELSE.
gs_return-message = text-020.
ENDIF.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
gs_balsmsg-msgty = sy-msgty.
gs_balsmsg-msgid = sy-msgid.
gs_balsmsg-msgno = sy-msgno.
gs_balsmsg-msgv1 = sy-msgv1.
gs_balsmsg-msgv2 = sy-msgv2.
gs_balsmsg-msgv3 = sy-msgv3.
gs_balsmsg-msgv4 = sy-msgv4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDIF.
CALL SCREEN '0100'.
*& Module status_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999 "full-screen size !!!
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog_input
CHANGING gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0100 IS INITIAL.
CREATE OBJECT go_alv_grid_0100
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0100 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0100 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0100.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0100->handle_toolbar_0100
FOR go_alv_grid_0100.
SET HANDLER go_event_handler_0100->handle_user_command_0100
FOR go_alv_grid_0100.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0100->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0100->set_toolbar_interactive.
ENDMODULE. " status_0100 OUTPUT
*& Module status_0200 OUTPUT
* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog---------------------------------------*
PERFORM build_fieldcatalog_bapi_input
CHANGING
gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0200 IS INITIAL.
CREATE OBJECT go_alv_grid_0200
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0200 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0200 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0200.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0200->handle_toolbar_0200
FOR go_alv_grid_0200.
SET HANDLER go_event_handler_0200->handle_user_command_0200
FOR go_alv_grid_0200.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0200->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_bapi_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0200->set_toolbar_interactive.
CALL METHOD go_alv_grid_0200->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_alv_grid_0200.
ENDMODULE. " status_0200 OUTPUT
*& Module user_command_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0100 INPUT
*& Module user_command_0200 INPUT
* text
MODULE user_command_0200 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0200 INPUT
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalog
*& Form handle_toolbar_0100
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0100
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'KONV'.
ls_toolbar-quickinfo = 'Konvertieren'.
ls_toolbar-text = 'Konvertieren'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0100
*& Form handle_user_command_0100
* text
* -->P_E_UCOMM text
FORM handle_user_command_0100
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'KONV'.
PERFORM convert_data.
ENDCASE.
ENDFORM. " handle_user_command_0100
*& Form exit_program
* text
* --> p1 text
* <-- p2 text
FORM exit_program.
CALL METHOD go_alv_grid_0100->free.
IF NOT go_alv_grid_0200 IS INITIAL.
CALL METHOD go_alv_grid_0200->free.
ENDIF.
CALL METHOD go_docking_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = sy-repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form handle_toolbar_0200
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0200
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'POST'.
ls_toolbar-quickinfo = 'Buchen'.
ls_toolbar-text = 'Buchen'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0200
*& Form handle_user_command_0200
* text
* -->P_E_UCOMM text
FORM handle_user_command_0200
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'POST'.
PERFORM post.
ENDCASE.
ENDFORM. " handle_user_command_0200
*& Form convert_data
* text
* --> p1 text
* <-- p2 text
FORM convert_data.
DATA: lf_perio(3) TYPE n.
LOOP AT gt_text_input INTO gs_text_input.
TRANSLATE gs_text_input-planbetrag USING '. '.
TRANSLATE gs_text_input-planbetrag USING ',.'.
CONDENSE gs_text_input-planbetrag.
gs_bapi_input-version = gp_versn.
gs_bapi_input-fisc_year = gp_gjahr.
gs_bapi_input-coobject = gs_text_input-kostenstelle.
gs_bapi_input-cost_elem = gs_text_input-kostenart.
lf_perio = gs_text_input-planperiode.
CASE lf_perio.
WHEN '001'.
gs_bapi_input-wkgbtr01 = gs_text_input-planbetrag.
WHEN '002'.
gs_bapi_input-wkgbtr02 = gs_text_input-planbetrag.
WHEN '003'.
gs_bapi_input-wkgbtr03 = gs_text_input-planbetrag.
WHEN '004'.
gs_bapi_input-wkgbtr04 = gs_text_input-planbetrag.
WHEN '005'.
gs_bapi_input-wkgbtr05 = gs_text_input-planbetrag.
WHEN '006'.
gs_bapi_input-wkgbtr06 = gs_text_input-planbetrag.
WHEN '007'.
gs_bapi_input-wkgbtr07 = gs_text_input-planbetrag.
WHEN '008'.
gs_bapi_input-wkgbtr08 = gs_text_input-planbetrag.
WHEN '009'.
gs_bapi_input-wkgbtr09 = gs_text_input-planbetrag.
WHEN '010'.
gs_bapi_input-wkgbtr10 = gs_text_input-planbetrag.
WHEN '011'.
gs_bapi_input-wkgbtr11 = gs_text_input-planbetrag.
WHEN '012'.
gs_bapi_input-wkgbtr12 = gs_text_input-planbetrag.
ENDCASE.
COLLECT gs_bapi_input INTO gt_bapi_input.
CLEAR gs_bapi_input.
ENDLOOP. "at gt_text_input
CALL SCREEN 0200.
ENDFORM. " convert_data
*& Form build_fieldcatalog_bapi_input
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_bapi_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VERSION' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'FISC_YEAR' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COOBJECT' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COST_ELEM' .
ls_fcat-ref_table = 'BAPIPCPVAL' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR01'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR02'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR03'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR04'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR05'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR06'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR07'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR08'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR09'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR10'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR11'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR12'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. " build_fieldcatalog_bapi_input
*& Form post
* text
* --> p1 text
* <-- p2 text
FORM post.
DATA:
lf_index(6) TYPE n,
lf_kostl LIKE csks-kostl,
lf_aufnr LIKE aufk-aufnr,
lf_kstar LIKE cska-kstar.
DATA:
lt_csks TYPE TABLE OF csks.
break c5085345.
* Header
gs_headerinfo-co_area = gp_kokrs.
gs_headerinfo-fisc_year = gp_gjahr.
gs_headerinfo-period_from = '001'.
gs_headerinfo-period_to = '012'.
gs_headerinfo-version = gp_versn.
gs_headerinfo-plan_currtype = 'C'.
LOOP AT gt_bapi_input INTO gs_bapi_input.
* Fill index structure
CLEAR gs_indexstructure.
lf_index = sy-tabix.
gs_indexstructure-object_index = lf_index.
gs_indexstructure-value_index = lf_index.
gs_indexstructure-attrib_index = '000000'.
INSERT gs_indexstructure INTO TABLE gt_indexstructure.
* Fill coobject
CLEAR gs_coobject.
gs_coobject-object_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_kostl.
SELECT * FROM csks INTO TABLE lt_csks
WHERE
kokrs = gp_kokrs AND
kostl = lf_kostl.
IF sy-subrc = 0.
gs_coobject-costcenter = lf_kostl.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_aufnr.
CALL FUNCTION 'K_ORDER_READ'
EXPORTING
aufnr = lf_aufnr
EXCEPTIONS
not_found = 1.
IF NOT sy-subrc = 0.
gs_return-type = 'E'.
gs_return-message+0(10) = 'CO-Objekt '.
gs_return-message+10(10) = gs_bapi_input-coobject.
gs_return-message+20(20) = ' existiert nicht.'.
CONDENSE gs_return-message.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
EXIT.
ENDIF. "IF NOT sy-subrc = 0
gs_coobject-orderid = lf_aufnr.
ENDIF. "sy-subrc = 0
INSERT gs_coobject INTO TABLE gt_coobject.
* Period value
gs_pervalue-value_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-cost_elem
IMPORTING
output = lf_kstar.
gs_pervalue-cost_elem = lf_kstar.
gs_pervalue-fix_val_per01 = gs_bapi_input-wkgbtr01.
gs_pervalue-fix_val_per02 = gs_bapi_input-wkgbtr02.
gs_pervalue-fix_val_per03 = gs_bapi_input-wkgbtr03.
gs_pervalue-fix_val_per04 = gs_bapi_input-wkgbtr04.
gs_pervalue-fix_val_per05 = gs_bapi_input-wkgbtr05.
gs_pervalue-fix_val_per06 = gs_bapi_input-wkgbtr06.
gs_pervalue-fix_val_per07 = gs_bapi_input-wkgbtr07.
gs_pervalue-fix_val_per08 = gs_bapi_input-wkgbtr08.
gs_pervalue-fix_val_per09 = gs_bapi_input-wkgbtr09.
gs_pervalue-fix_val_per10 = gs_bapi_input-wkgbtr10.
gs_pervalue-fix_val_per11 = gs_bapi_input-wkgbtr11.
gs_pervalue-fix_val_per12 = gs_bapi_input-wkgbtr12.
INSERT gs_pervalue INTO TABLE gt_pervalue.
ENDLOOP. "at gt_bapi_input
* Buchungsbaustein
CALL FUNCTION 'BAPI_PRIM_COST_CHECK_AND_POST'
EXPORTING
header_info = gs_headerinfo
testrun = gp_test
* DELTA = ' '
TABLES
idx_structure = gt_indexstructure
object = gt_coobject
per_value = gt_pervalue
tot_value = gt_totvalue
contrl = gt_control
return = gt_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
LOOP AT gt_return INTO gs_return.
gs_balsmsg-msgty = gs_return-type.
gs_balsmsg-msgid = gs_return-id.
gs_balsmsg-msgno = gs_return-number.
gs_balsmsg-msgv1 = gs_return-message_v1.
gs_balsmsg-msgv2 = gs_return-message_v2.
gs_balsmsg-msgv3 = gs_return-message_v3.
gs_balsmsg-msgv4 = gs_return-message_v4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDLOOP. "AT gt_return
PERFORM show_log.
ENDFORM. " post
*& Form create_log
* text
* --> p1 text
* <-- p2 text
FORM create_log .
DATA: ls_balslog TYPE bal_s_log.
* Einige Verwaltungsdaten
ls_balslog-extnumber = 'ZPLAN010'.
ls_balslog-aluser = sy-uname.
ls_balslog-alprog = sy-repid.
* Create
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_balslog
* IMPORTING
* e_log_handle = gf_balloghndl
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_log
*& Form add_log_message
* text
* -->P_GS_BALSMSG text
FORM add_log_message
USING
ps_balsmsg TYPE bal_s_msg.
break c5085345.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
* I_LOG_HANDLE =
i_s_msg = ps_balsmsg
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_messa
*& Form add_log_message_free_text
* text
* -->P_GS_RETURN_TYPE text
* -->P_GS_RETURN_MESSAGE text
FORM add_log_message_free_text
USING
ps_type
ps_message.
CALL FUNCTION 'BAL_LOG_MSG_ADD_FREE_TEXT'
EXPORTING
* I_LOG_HANDLE =
i_msgty = ps_type
* I_PROBCLASS = '4'
i_text = ps_message
* I_S_CONTEXT =
* I_S_PARAMS =
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_message_free_text
*& Form show_log
* text
* --> p1 text
* <-- p2 text
FORM show_log .
DATA:
l_s_display_profile TYPE bal_s_prof.
* get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
e_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* use grid for display if wanted
l_s_display_profile-use_grid = 'X'.
* set report to allow saving of variants
l_s_display_profile-disvariant-report = sy-repid.
* when you use also other ALV lists in your report,
* please specify a handle to distinguish between the display
* variants of these different lists, e.g:
l_s_display_profile-disvariant-handle = 'LOG'.
* call display function module
* We do not specify any filter (like I_S_LOG_FILTER, ...,
* I_T_MSG_HANDLE) since we want to display all logs available
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
i_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?
Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.
I can't, look at this image
-
Help overclocking MSI X58 Pro-E with a i7 920 co stepping
Good evening everyone, I would like some help with getting the best overclock I can with my rig. This is what I have: Msi X58 Pro-E, Intel core i7 920 co stepping, Corsair Hydro H50 cooler, 3 x 2 gb Corsair XMS3 DDR3 1600 c9, EVGA GTX260-216 SC 896mb, 1 TB Western Digital 32cache Hard drive SATA, Lite-on DVD/RW with Lightscribe, OCZ Stealthxstream 600 watt PSU. Running Windows Vista Home Premium 64 bit. Currently it says that the memory is only running at 500 mghz. I can use all the help I can get. From what I have read it should overclock fairly well. Thanks for your help John
Quote
Currently it says that the memory is only running at 500 mghz.
Using CPU-Z? If so, 500x2=1000. For a simple OC without having to do much of anything, change bclk to 166/167. Be sure to disable Spread Spectrum in bios Cell Menu. Go up from there until it fails to post. Add a step or two of CPU voltage & check for post again. At some point, RAM speed becomes a factor, & other voltages & settings join in the mix. Primarily, the main items involved are bclk, CPU & RAM voltage, QPI voltage sometimes at some point, RAM timings, Memory & Uncore Ratios. Other than that, disable Overspeed Protection, C-State, Turbo on or off, EIST on or off. Most important, know the operating temp & voltage limits. -
Hello! I try for the first time to edit a multicam with FCPX . I did all the sync, i can easily switch images. But nothing happens in the timeline when I use the razor for editing.
What is the preoblem please?Russ H wrote:
This KB doc explains it better.
… the funny thing, this article and all other profound advice been found on the net, miss to mention a very basic advice:
first of all, a MC is clip as any other !
… sounds perhaps a bit … too basic , but - as an amateur like me, and using MCs almost any day - you should keep that in mind for your workflow.
After creating a MC, which can be done in seconds!, you get a single clip in the Events browser - and you should treat it as any other clip:
select parts of it, add it to your timeline, you can add it to secondary (for pic-in-pic for example), you can split it, shift it, nudge it, ...
aaaand you can select a diff. perspective = camera (or mic…), without losing synch.
I'm noticing, people spend way too much time in the multi-track timeline view of an MC, in hope, this gives them back those 'tracks' FCPX doesn't offer (for good reasons...) -
Unable to boot with MSI X58 PRO-E and OCZ3P1333LV6GK
Hi,
This is my first post in this forum.
I've had this system for about 6 months, and from time to time I kept having instant reboots and once the PC would never start, I think I've sorted that by first flashing an old MB BIOS and then the most recent.
Tree days ago I've had another instant reboot, but now the system stops/reboots when the coloured animation starts to appear above the "Loading windows" message. This happens with both Win7 32 & 64 bits and even with the windows 7 installation DVD !!!
I think I've tried all combinations of the other posts where the MB+memory was the same as mine.
Another strange issue is: the memory PN shown inside the BIOS (OCZ3G1333LV2G) is different from the label on the memory (OCZ3G1333LV6GK)!!
I've already tested with only one memory chip at a time, the result is still the same.
I've only got connected the following: Video board, 1 RAM chip, USB Keyboard & one SATA HD. No over clocking whatsoever !
What else do I need to do to finally boot to windows ?
Thanks in advance for any help.
Paulo
My System:
Mobo: MSI X58 Pro-E, model MS-7522, version 3.1
BIOS: 8.B
CPU: Intel i7 920
RAM: OCZ3G1333LV6GK (6GB)
Video: Sapphire Vapor-X ATI RAdeon HD 4870 2GB
PSU: Combat Power CP 750W
OS: Windows 7 32 & 64 bitsHi Henry,
Thanks for the help.
"What are your RAM timings? Screenshot of CPU-Z Memory tab and SPD tab."
I've added a few screenshots of the memory, the SPD & CPU-Z tab, plus a MEM86 test with only on memory stick installed. It appears that the memory is OK... or not ?
"Do you have another video card you can try? Those Sapphire Vapor-X cards have been a problem for others in the past."
I wasn't aware of any problems with this video card, I use it mainly to send movies to my big LCD TV through the HDMI port. I don't have access to another video card, sorry...
I don't know what else to do, do you think it's the PSU ?
Regards,
Paulo
--I made it so your images show and are clickable
--Mike
Maybe you are looking for
-
Hello! I am a student at an univercity in Sweden and using Solaris 5.8 on Ultra computers. I (obviously) don't have root access to the system. My problem is that I cannot add to the fontpath with "xset fp+ ~/fonts" command. I get the following error:
-
i have to extract materials from a given business area in a report. Can i use MBEW and T134G for that . Both have common field valuation area . Do i need to use division from mara also for extracting the materials . I just want materials from bu
-
We have CHF as local currency key for a consolidated unit, but we use EUR as Functional/ operating currency. Unfortunately, parallel currencies have not been activated for the consolidated unit. How does multiple currencies are handled in SEM-BCS? On
-
TS1424 Some songs I've downloaded are not the full track. What should I do?
I've downloaded an album but some songs only play half the song. I don't want to pay for these songs again. What should I do?
-
Full database import and export
Hi, i performed full database export and want to perform full import please suggest me how to perform full import..