First Website Attempt
This is my first attempt at building a website. I have many
questions, but I will start with a basic one.
I have one image that I want to cover the entire page. How
can I do that and then set the table up after the image is placed?
Please remember that I don't know much. . . so please speak
in layman's language!
Thanks
Judyg548
> Ok, I guess I am doing something wrong. Can you use a
png file from
> fireworks?
Yes, but only if you have EXPORTED it as an 8bit or 24bit or
32bit PNG. Do
not use a native FW PNG file.
> That image is the right size for my page so I wouldn't
need to stretch it.
Your page is a fixed width? What about when someone resizes
their text in
the browser to make the page easier to read, but also taller?
> I worked through the CSS STyle instructions. How do I
get the image on
> the page?
You define a style on the page for the container behind which
you want this
image to appear. Perhaps if you showed us your page by
uploading it and
pasting a link to it in a reply, you could get more specific
help.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"judyg548" <[email protected]> wrote in
message
news:f9sunp$54c$[email protected]..
> Ok, I guess I am doing something wrong. Can you use a
png file from
> fireworks?
> That image is the right size for my page so I wouldn't
need to stretch it.
> I
> worked through the CSS STyle instructions. How do I get
the image on the
> page?
>
> Sorry for the dumb questions!
>
> Thanks
>
Similar Messages
-
My first website attempt with divs
Hi all, first time poster.
I have made a few basic websites in the past to practice with
where I used tables, but this is my first try at a div based
website. I would like to get into graphic design or web design as a
full time career!
http://iosoft.co.nz/test/index2.html
The text that you see there expands and goes down the page
like it should, but it overlaps the bottom divs that have the
copyright details and the orange horizontal line. Is there are way
to make the text expand, but stop just above that orange line and
then stretch the page downwards, if you get what I mean? I have
been able to do this with tables, but if there is a way to do it
with divs that would be great. I have done a bit of searching on
the net but couldn't find what I was looking for :(
Thank you :)> I'm trying to re-do the website layout without using
positioning, although
> the
> only way I can get my #container div to stretch 100%
height of the
> viewport is
> to absolutely-position that specific div.
Bad news - that won't work reliably, either....
> If the divs inside of that one aren't positioned, will
my text area fill
> down
> the page without overlapping the others?
The simplest answer is "yes" but it would depend alot on what
you imagine to
be happening when you say "fill down the page".
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"d.morgan" <[email protected]> wrote in
message
news:gecgsc$4f6$[email protected]..
> Thanks for that.
>
> I'm trying to re-do the website layout without using
positioning, although
> the
> only way I can get my #container div to stretch 100%
height of the
> viewport is
> to absolutely-position that specific div.
>
> If the divs inside of that one aren't positioned, will
my text area fill
> down
> the page without overlapping the others?
> -
So, I have just about had it. For nine days now, I have valiantly tried to move my library to an external drive. At first, I attempted to move it to my 2TB Time capsule. iTunes didn't like its new home though and moved home without telling me. So then there were two libraries. I meshed them back together reluctantly and iTunes in a silent revolt, absolutely refused to use its own 'Keep Library Organized' criteria and may as well have thrown my music against the wall. Seriously, my 5 year old nephew has his computer files better managed. Then I bought a 3TB Time Capsule and you may ask yourself why??? Well, iTunes doubled in size- although when I ran apps that are designed to find duplicate iTunes files, it deleted the music I actually bought from iTunes. So then I watched as iTunes got it back. How you ask; I run a MacBook Air, iMac and Mac mini in my house - as soon as one powered up it hit the net like a sailor on leave and re-downloaded it all without abandon. I tried to keep the libraries separate, no success there. I tried to keep them unified; iTunes response was to ask me if I wanted to join iTunes Match every time I logged on to my computer and on any computer - my iTunes match song number has been as high as 24,367 and as low as 11,112. And I can't simply refuse iTunes. No one refuses iTunes. Refusal to allow iTunes Match to run through all 24000 songs again was to revoke my rights to the songs that were once part of my library. If I took a long time to decide or was visibly impatient while iTunes did its little 3 hour scan it would arbitrarily decide that music I bought from iTunes was ineligible for iTunes Match. How could that possibly be??? I am missing music, or at least iTunes tells me so by showing me that lovely exclamation point. I have tried backing up my computer to do a full system restore and start all over. Time Capsule claims I have 979 GB of data and takes its sweet time to even back up one gig (about 18 minutes) even though I can transfer files to my Time Capsule at about 1 GB every 40 seconds. I guess though performing back-ups are somewhat like government jobs; it will get done, when it gets done. The back up requirement of 979 GB is surprising though, my Mac claims that I currently occupy just about 25% of my 2TB drive. The discrepancy, who knows, but I think the solution lies somewhere in iTunes. But maybe iPhoto. But that is for another time.
After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive. -
Passivation Tables (PS_TXN) Not Created on First Passivation Attempt
Fusion Middleware Version: 11.1.1.5
WebLogic: 10.3.5.0
JDeveloper Build: Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
Project: Custom WebCenter Portal Application integrated with custom ADF task flows.
Hi
We are trying to use the jbo.server.internal_connection property in the Business Components layer to change the database to which passivated application module data is written (PS_TXN table).
We have set the property to a valid data source using the JNDI name. The entry in the bc4j.xcfg file is as follows:
<Database jbo.locking.mode="optimistic" jbo.server.internal_connection="jdbc/mds/CustomPortalDS"/>
After making the change, when I run the application through my integrated WLS instance within JDeveloper, the first instance to passivate its data results in the necessary passivation database objects being created in the target instance (PS_TXN, PS_TXN_SEQ & PCOLL_CONTROL).
If however we then remove those objects from the target instance and run the application on our standalong WebLogic server we get an error accessing the application because the BC framework cannot find the PS_TXN table to write to. The following error appears in the log files:
Caused by: oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 10, persistent id 1
at oracle.jbo.PCollException.throwException(PCollException.java:36)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1901)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:564)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:688)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:647)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:465)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:267)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5975)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5835)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateForUndo(ApplicationModuleImpl.java:8857)
at oracle.adf.model.bc4j.DCJboDataControl.createSavepoint(DCJboDataControl.java:3180)
at oracle.adf.model.dcframe.LocalTransactionHandler.createSavepoint(LocalTransactionHandler.java:75)
at oracle.adf.model.dcframe.DataControlFrameImpl.createSavepoint(DataControlFrameImpl.java:797)
at oracle.adfinternal.controller.util.model.DCFrameImpl.createSavepoint(DCFrameImpl.java:31)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.initializeModel(TaskFlowCallActivityLogic.java:1015)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.enterTaskFlow(TaskFlowCallActivityLogic.java:615)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeLocalTaskFlow(TaskFlowCallActivityLogic.java:337)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeTaskFlow(TaskFlowCallActivityLogic.java:229)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:217)
at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1380)
at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:440)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:358)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
at oracle.adf.view.rich.component.fragment.UIXRegion$RegionContextChange.doChangeImpl(UIXRegion.java:1199)
at oracle.adf.view.rich.context.DoableContextChange.doChange(DoableContextChange.java:91)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:693)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:50)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
at oracle.jsp.runtime.tree.OracleJspNode.execute(OracleJspNode.java:89)
at oracle.jsp.runtimev2.ShortCutServlet._jspService(ShortCutServlet.java:89)
at oracle.jsp.runtime.OracleJspBase.service(OracleJspBase.java:29)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:422)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:802)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:726)
... 122 more
Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:99)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1887)
... 184 more
My understanding is that it is the adfbc_create_statesnapshottables.sql script that creates these database objects. The description in the file is as follows:
"By default, BC4J will create these objects in the schema of the internal database user the first time that the application makes a passivation request. This script is intended for advanced users who require more control over the creation and naming of these objects."
My question then is why is this not happening when the application is run on the standalone WebLogic server but is happening when run on the integrated JDevelopers WLS?
Any help greatly appreciated.Hi
Thanks for your reply.
We have already considered the points in the referenced links.
The correct privileges exist for the schema used by the data source and we don't see any messages other than ORA-00942.
We have run a 'Finest' trace on package oracle.jbo.* and there is no further information. I have pasted the diagnostic output from the first passivation attempt below:
[SRC_METHOD: passivate] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.Serializer] <AM MomVer="0">[[
<<PASSIVATION DATA FOLLOWS NOT PASTED INTO THREAD>>
</AM>
[SRC_METHOD: insert] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.pcoll.OraclePersistManager] [2226] **insert** id=1, parid=-1, collid=10, keyArr.len=-1, cont.len=981
[SRC_METHOD: insert] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.pcoll.OraclePersistManager] [2227] stmt: insert into "PS_TXN" values (:1, :2, :3, :4, sysdate)
[SRC_METHOD: getInternalConnection] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.DBTransactionImpl] [2228] Getting a connection for internal use...
[SRC_METHOD: getInternalConnection] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.DBTransactionImpl] [2229] Creating internal connection...
[ADF_MESSAGE_ACTION_NAME: Establish database connection] [APP: XXJLPPartnerLinkApp#V2.0] [ADF_MESSAGE_STATUS: begin] [ADF_MESSAGE_ACTION_DESC: ] [URI: /jlpportal/faces/home] [ADF_MESSAGE_CONTEXT_DATA: Is datasource?=true;#;Connection identifier=weblogic.jdbc.common.internal.RmiDataSource@2b002b00] Establish database connection
[SRC_METHOD: establishNewConnection] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.DBTransactionImpl] [2230] Trying connection: DataSource='weblogic.jdbc.common.internal.RmiDataSource@2b002b00'...
[ADF_MESSAGE_ACTION_NAME: Establish database connection] [APP: XXJLPPartnerLinkApp#V2.0] [ADF_MESSAGE_STATUS: add_context_data] [URI: /jlpportal/faces/home] [ADF_MESSAGE_CONTEXT_DATA: Success?=true] Establish database connection
[SRC_METHOD: establishNewConnection] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.DBTransactionImpl] [2231] Before getNativeJdbcConnection='weblogic.jdbc.wrapper.PoolConnection_oracle_jdbc_driver_T4CConnection
[SRC_METHOD: establishNewConnection] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.server.DBTransactionImpl] [2232] After getNativeJdbcConnection='weblogic.jdbc.wrapper.PoolConnection_oracle_jdbc_driver_T4CConnection
[SRC_METHOD: insert] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.pcoll.OraclePersistManager] [2233] **insert** error, sqlStmt=null
[SRC_METHOD: insert] [URI: /jlpportal/faces/home] [SRC_CLASS: oracle.jbo.pcoll.OraclePersistManager] [2234] java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist -
We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy ChapmanTry to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
For past several days, my Windows e-mail browser frequently freezes and must be closed. This occurs whenever message near top of browser states that Adobe website wants to install Adobe Flashplayer. Windows explanation states that termination is a result of Data Execution Prevention (DEP). How do I stop Adobe Website attempts to install Flash Player, or if that is not possible, what is a solution? I have uninstalled Flash Player in an attempt to resolve problem without success.
You can find a link and instructions for the last version of Flash Player compatible with PowerPC in this FAQ:
What version of Flash Player should I use with my Power PC based Mac?
For what it's worth, Apple itself discontinued support for PowerPC with their operating systems back in 2009 with the release of Snow Leopard. Regardless, I know its frustrating when your system is no longer supported. Hopefully the instructions I posted in the FAQ allow you to get Flash content running again.
Chris -
Ive finished my first website now my next problem, who can help?
Hi there,
With lots of help from Nadia, ive finished my website..
http://www.tlmgoldman.com/
Now ive got to move on to an other level and i hope you can help me.
As you can see the website is working fine. Now ive got one new question from my client. Is it possible that my client can change the text himself? And he want to add a new page with a lot off new pictures.. for the employers.
What is the best way to do this. Is it possible to do this without a cms system because cms is for me like flying to mars..
Is there some kind of program so my client can upload some pictures and changes some text on all the pages?
I will be happy to hear from you..
Regards BrianHi thank you for your response,
but when i replace the text my whole left column dissapears. Must i replace the first text or just add it can you tell me where to put it?
Welkome bij TLM Goldman<br />
TLM Goldman levert sinds 2007 consultingdiensten in de branche Trading & Investments. De focus van onze cliënten ligt op de handel in financiële instrumenten en derivaten zoals aandelen, obligaties, energie, carbon, opties, equity swaps, futures en gerelateerde producten. TLM Goldman zet zich in voor zijn cliënten opdat zij concurrerend blijven in hun markt, operationele voordelen behalen en aan internationale wet- en regelgeving voldoen.
Date: Mon, 24 May 2010 15:54:07 -0600
From: [email protected]
To: [email protected]
Subject: Ive finished my first website now my next problem, who can help?
Switch to Code View.
<div id="left_column">
h3. Welcome to TLM Goldman
<!begin Cushy CMS editable division>
<div class="cushycms">
</div> <!end cushycms>
</div> <!end left_column>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com
> -
Hi everyone!
I've decided to post my first website. Everything is running smooth so there shouldn't be any problems.
It's a noncommercial site for me and some friends. I've done everything on it pictures, filming, editing, uploading and some of the snowboarding you name it. Mainly just a hobby of mine.
I'm new to a lot of this but this support page has been more than help full. All comments are welcome and appreciated. Well I guess it's time to face the music.
http://snowdn.comWOW! I can't believe all the positive feed back, you guys are awesome. Ok I just got home so let me address everyone.
Derek Russell-
You said you liked the video. Witch one? I'm curious. I agree with you on the links being hard to see. I've been wondering if there's anyway to change the color or location of them? The web site your setting up sounds pretty cool, you'll have to keep everyone posted. I checked out your post "site feedback 2", looks good. That text box with scroll was cool. How did you do that? I'd like to something like that for my videos. Do you know if you can display links to your other pages in one?
Svendo-
My website is hosted through Yahoo. Their cheep, the support isn't the greatest, and the site builders provided aren't up to date with Mac's. On the other hand if your using iWeb you shouldn't have to many problems. Yahoo's photo gallery page has some nice features and is real easy to set up. I prefer it over the iWeb one. Too many issues with photos not showing up.
Kevin Wolfe3-
The image fill feature is probably one I have over used. Most of the images are from the video that is playing so I really like that feature. I made sure to compress the file size of each one to reduce upload time but maybe I should just stick with one. Something that allows the links at the top to be shown easier.
Pardthemonster-
Yes io is the site name I used in iWeb. I didn't realize dragging each file to my main hosting directory without the site folder would eliminate the long url. I'll have to try that.
Well thanks again on all the feedback, it really helps to here everyone's opinion. Keep the comments coming I'm all ears. -
Help- Trouble Publishing First Website
Hi, I built and I am ready to publish my first website to the web. I have a host and an ftp account and have signed into the ftp account. I have fallowed a tutorial from tutvids.com that tells me how to publish my site and I fallowed it exactly. I am able to connect to the server from dream weaver and I am even able to see my files on my cpanel on my web server. I also have been able to connect ftp account on filezilla and I can see my files. After all of this my site is still not online and I am wondering what I am doing wrong? Am I missing something? Is there something I can check to see if I have done something wrong? Any help would be greatly appreciated!!
I am getting an error on filezilla saying connection closed by server but before that it did connect to the server and it did have the files. I sent a support ticket to the server asking them for their help but of course they have not answered me back yet. The web address is www.centerstagesalon.net. When I got to that site it just shows the host and that I can sign in to upload the site but it should be the site. The web hosting account was created two nights ago but the domain name was purchased a couple of months ago. The domain name was purchased from a different provider but I have already pointed it to the the host and it does go to the host. The tutorial showed that when you go through the site manager on dreamweaver you put in your ftp info and test it and mine worked fine. I then fallowed the instructions to add the site files and they were added fine. Then I checked to see if it was online and it wasn't. So then I tried to get help through the host. I submitted a support ticket, which hasn't been answered. I also fallowed the instructions and configured the ftp account and dl filezilla. I was able to connect to the ftp account through filezilla aswell and saw the files on that. I then went to my file manager on cpanel for my web host and the files for my site were there under the public folder but still the site is not online. So I am confused and thinking maybe your right that something is wrong with the host. I hope they answer me soon!!
-
Adobe dreamweaver cs5 creating your first website part 2
I'm trying to do the study creating your first website 2 but I have a problem. Maybe I'm stupid but all the time they are talking about figures but I don't see any picture. In part 1 they where there but in part 2 I see or find no pictures or figures at all. Can anyone help me, maybe even after that has stopped laughing about my ......hahaha Thanks!
I'm at this moment in Portugal and I work with Mozilla, I tried with Explorer but the same result. I got an answer from Hans G who suffers the same problem and he said we had to be patient.....because the tutorial would come later. But you have it already? well patience can be a good thing on the right moment offcourse, thanks anyway it seems that I have to......
Date: Sun, 20 Feb 2011 15:55:20 -0700
From: [email protected]
To: [email protected]
Subject: Adobe dreamweaver cs5 creating your first website part 2
I see only the letters figure 1,2....8 etc. but no picture.and if I click on them nothings appears!
In which part of the world are you located?
Have you tried using a different browser?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
> -
Please help! first website! movie clip placed on main timeline wont play!
Hi! if any one could please help me it would be greatly
appreciated!
So im trying to make my first website in flash and ive ran
into a problem. I have the main movie, my main time line. I have a
few animations going on in this that were all created in that main
time line. those work fine. however, i created two new movie clips
(still inside the same .fla file) and animated them with thier own
time line. I then thought you could just drag and drop these movie
clips onto your main time line and they would play inside the
movie. but when i press ctrl + enter, the dont play!
here are some points of intrest.
my main movie (the main time line) is 130 frames.
the movie clips i made inside the same .fla file are between
400 and 600 frames.
i placed both new movie clips on the 130th frame in the time
line with their own layers.
also there is a layer for actions on the 130th that has
stop();
i thought that maybe the time line had to be as long as those
movie clips i created and so i extended it but they still didnt
play.
im thinking action script is involved? please help me im
getting pretty frustrated and im sure there is something simple to
achieve this.
here is a link where you can download the source files im
using. if you open the file the two movie clips i created are
called front two and front one and are layers with the same name.
this board wont let me fully post my link cause the last word
in it is s*h*i*t* so youll have to type it in your browser. its
http://public.me.com/matts*h*i*t*
(just remove the asterisks)
also i noticed that my file is huge. i used photoshop to
create everything and them imported it into flash. is there a way i
can reduce this size?
thank you sooo much! please help!
-MattHey Matt,
I'll take a look at your file, but as a general rule, a
movieclip's timeline plays automatically when it is first
instantiated. Instatiated means its first frame where "it exists"
on the timeline that contains it. So the layer that holds your
movieclip animation, needs to extend the length of the timeline you
want that movieclip to "exist". Other than that rule, the frames
don't NEED to match the frames inside said movieclip.
So, if movieclips play automatically, and yours isn't, there
must be something either stopping the movieclips timeline, or your
movieclip isn't existing on the timeline because the layer that
holds it, doesn't have keyframes the length you need it to.
Yeah optimizing your sprites (2d graphical elements), and
using vector when you need to (if you don't know the difference
between raster and vector, google it) will significantly lower your
outputted .swf file size.
Edit: After looking at your file, your movieclips are not
playing (well, they're technically playing, just not showing up)
because your masker layer has multiple objects on it. A masker
layer (not to be confused with the maskee layer, the layer being
masked) needs to have only one object on it, or else you break the
mask. The grey border of your mask movieclip needs to be deleted
before your animation will play. -
How to find "start-dreamweaver-first-website" zip in local site folder?
Hallo...
I have download that file already. But somehow it does not show up on the "local site folder" when i want to save it as in the tutorial video suggest....
Do i need to do anything else before that to save it.???
BTW, how to unzip that folder....??
Thanks a lot.Dear Ken:
Many many thanks...[?]
2015-03-08 19:22 GMT+08:00 Ken Binney <[email protected]>:
how to find "start-dreamweaver-first-website" zip in local site
folder? created by Ken Binney
<https://forums.adobe.com/people/Ken+Binney> in *Dreamweaver support
forum* - View the full discussion
<https://forums.adobe.com/message/7264408#7264408> -
I'm designing my first website using Fluid Grid Layouts. CSS question
I'm designing my first website using CS6 and Fluid Grid Layouts so I need a lot of help. I realize CS6 creates something called a boilerplate css file. However, in addition to that file, do I have to create an individual external style sheet for my desktop, ipad, and smart phone pages (3 separate style sheets) or should I have only one external style sheet for everything?
Or this is there another recommended way to use Fluid Grid Layouts?FluidGrid Layouts creates a boilerplate.css file, a respond.js file & a Fluid.css file for you -- you name it whatever you like. I like to call mine Fluid.css so I remember what it is.
Fluid.css contains mobile first -- upon which all others are based. Inside, CSS Media queries, you'll find code for tablet and later on desktop. So one stylesheet generated by DW covers all 3.
TIPS:
FluidGrids are very temperamental. Do not tamper with boilerplate.css or Fluid.css files. Instead create a separate external style sheet for your typography & other custom content styles.
Build mobile first, then tablet and finally desktop.
Keep your designs simple and uncluttered.
Don't worry about content until you get the layout perfected.
Have fun with it . You'll probably have to start over a few times before you get what you want.
Nancy O. -
First website with Adobe.
I love creation, but for many years have just used iWeb to create web pages. Now that I have the time to put more time into creating a site, I have bought Creative Suite Design Premium and also got Cold Fusion and Flex. I want to create a website that is informational about Archery and Bow hunting, consisting of blogs, rss, video, photo albums and complex calculators. Where would the first place be for me to start?
I am familiar with Photoshop as I used it in High school for art but as for as other programs such as Dreamweaver, Flex, Fireworks, I'm lost. Understanding what code to use for what. Pretty much a COMPLETE beginner with web development, but I pick up on things real quick.
A web page I have created using iWeb.
www.nolimitsarchery.com
one I started to create, but decided I need ot learn more to get the results I want.
web.me.com/wateroksnmudNot sure what the question is.But I can understand your excitement. First website is always very fullfilling and satisfying.
Web Development Company India - Horizoncore -
ipad mini going disabled on first correct attempt at passcode. Has happened three times. had to restore with iTunes each time. Is this one a dud?
Does the screen respond properly to your typing? If it handles other typing correctly, leave the passcode off and see if it wakes and works properly.
If it has problems with recognition of typing, take it to an Apple store genius bar and have the techs check it out.
Maybe you are looking for
-
How to change the default hint box color?
How to change the default hint box color on the default Metal LookAF? I'm trying looking for something with javax.swing.UIManager, but i just find ways to translate the UI. Any idea?
-
After upgrading to ios 5, I can't share my calendar on ical
My wife is able to share her calendar with me, but I can't share with her. Most times when I go to the calendar tab, the share option is not available, only publish is. Other times, share is available, but greyed out.
-
When i click a new tab button the background image appears but quickly disappears... I know that this shouldn't happen but it always happen no matter what i try... Can anyone help me??? Please??? I want my background, that is provided by the theme, t
-
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Hi, How to creat a Business System and Tech System in SLD for the DB2 DataBase? Joseph
-
My videos are flipping like waves of water
Hello! Firefox... My computer crashed and I sent it in to be serviced and the installer installed a different video-card than the one that was in my computer [which is a refurbished computer] and my pages where flipping or overlapping... Therefore, I