First words are lost when using Bluetooth voice de...

This happens with any Nokia Nxx or Exx when used with bluetooth HF device, like Nokia HF-300. Is there any solution to this problem? In practice you can hardly use any navigation with bluetooth voice. The delay itself is not a problem but the phone should wait 0.x seconds after opening the line to the HF device. It would be nice if you could configure this kind of delay to the phone.

Is this the case when listening to the radio or music from the phone?
I'd expect it to pick everything up when listening to music from  the phone as it's on the same channel (A2DP).
But if you're getting all the nav guidance with a radio mute then that is a huge step forward.
Usually the problem occurs when there is a delay for the mute of the radio followed by the streaming over mono channel.
Message Edited by confiture on 18-May-2009 08:56 PM

Similar Messages

  • Is it a way to use bluetooth voice system in my volvo s80 with iPhone ?

    is it a way to use bluetooth voice system in my volvo s80 with iPhone ?
    Volvo system can not see iPhone, like my old phone.

    It's a pretty good idea - why not send a suggestion here:
    http://www.apple.com/feedback/appletv.html
    ....especially as AppleTV has no analogue audio out, and most non-Bluetooth wireless headphones would expect an analogue input (there are some expensive ones that handle optical, or the user coudl maybe use TV headphone/audio out, but Bluetooth audio might be handy for many.
    AC

  • Network is lost when using GPS on 3GS

    Network is lost when using GPS on 3GS.
    ver. 5.1.1 (9В206)
    model MC637RR
    SN 86223J1DEDG
    05.16.05.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Siri sounds bad when using Bluetooth

    Siri sounds bad when using Bluetooth, but the phone calls sound great.

    Can a few of you help me with a test? I have a Jawbone 2 & a Jawbone Icon. Both exhibit a strange behavior with my iPhone 4. If either of these headsets are on, paired & connected AND a call is answered or initiated, things are fine.
    When it all goes downhill is in this scenario:
    My headset is OFF. I receive or make a call and mid-call, I decide to turn on the headset (which I keep off to save battery). The Jawbone connects and automatically switches the iPhone from PHONE to JAWBONE. This is all normal right? Okay here's the problem. The call quality has static, sounds muffled and the caller tells me I sound like I'm in a tin can. If I then switch back to the phone (through the iPhone page of Sources) and then back again, to the Jawbone, most times--quality is back to normal. Obviously this is not something we all want to be doing. Can anyone do this test with their headset .. any brand and even some of you with Icons? It would be good to know if the culprit is the Bluetooth Headset or the iPhone. Remember, it's important that you make a call with your Bluetooth headset in the OFF position and then turn it on mid-call to use it.

  • HT1688 iOS7 and connecting calls when using Bluetooth device

    After upgrading to iOS7, it takes a long time to connect a call when using Bluetooth in my car. Worse of all, when checking voicemail, the message does not come across the Bluetooth device even when audio device output is selected as Bluetooth device. Any solutions to this problem?

    Hi, eklinck. 
    Thank you for visiting Apple Support Communities.
    Sometimes closing all applications open in multitasking and power cycling the device can resolve the issue.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    However, if you are still experiencing the issue I have included the best troubleshooting article.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    Jason H.

  • HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

    When using compressor voice is not sync with video. What causes this and how to fix it, please?

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • Web pages are black when using Safari 4.0.3 on Windows 7

    Web pages are black when using Safari 4.0.3 on Windows 7. It does not matter what page I try to view, all page are black. Sometime I can see pictures and white text box.
    Screen capture:
    http://users.jyu.fi/~ksalone/virhe/Safari403_Problem_onWin7.PNG

    Hi and welcome....
    Try deleting the temporary internet files (cache)
    How to Delete the Contents of the Temporary Internet Files Folder
    Carolyn

  • Why is the search and logins fields are black when using AOL

    Why is the search and logins fields are black when using AOL??

    M3nth,
    Seems like we're all asking the same question
    As tst says... try not to use the one at the bottom.. it's ... hummm..
    It's behavior is unpredictable...
    As for the multiple listing I'll have to read Molly's response on this (I asked the same question is the "Xtreme thread")
    JLV
    === EDIT ===
    Hi Molly,
    I read your answer on the bottom search engine..
    That's what I thought it did... but it didn't work for me.. I tried to use it to find some of my own posts within LV.. and it didn't find anything.
    The search was : serial
    I did this while reading a LV question of the subject.
    I shall experiment with the search engine again and report my findings.
    R.Message Edited by JoeLabView on 03-17-2005 02:24 PM

  • What are the .fm.sp files that are created when using SharePoint?

    What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

    Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
    .fm.sp indicates that its the framemaker type SP file.
    Dont worry about it as its not creating any mess in the system.
    Harpreet

  • Error 80 when using bluetooth on car radio

    error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5

    me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out.  mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S.  im blaming Pioneer not Apple for this
    I ended up buying a new deck for my car...gets installed tomorrow.

  • When using bluetooth, siri says she can't make a call.

    when using bluetooth, i say "call XXX", and siri says "calling XXX", but then says, "i can't make that call".  works fine when not on bluetooth.

    Hello there, Baxter530.
    The following Knowledge Base article provides pretty extensive steps to troubleshoot Bluetooth on your iPhone:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why does iMovie abruptly abort when using record voice over?

    Why does iMovie abruptly abort when using record voice over?

    Hey PTD1,
    Thanks for the question. If I understand correctly, iMovie unexpectedly quits when using record voiceover. I would recommend that you read this article, it may be able to help the issue.
    iMovie: How to troubleshoot "Application Unexpectedly Quit" messages - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Callers say my voice sounds muffled when using bluetooth.

    I have a motorola bluetooth h710/h715 and as soon as I got the iphone 4, everyone is telling my I sound muffled when using it, compared to my 3gs. Anyone else have this issue?

    Can a few of you help me with a test? I have a Jawbone 2 & a Jawbone Icon. Both exhibit a strange behavior with my iPhone 4. If either of these headsets are on, paired & connected AND a call is answered or initiated, things are fine.
    When it all goes downhill is in this scenario:
    My headset is OFF. I receive or make a call and mid-call, I decide to turn on the headset (which I keep off to save battery). The Jawbone connects and automatically switches the iPhone from PHONE to JAWBONE. This is all normal right? Okay here's the problem. The call quality has static, sounds muffled and the caller tells me I sound like I'm in a tin can. If I then switch back to the phone (through the iPhone page of Sources) and then back again, to the Jawbone, most times--quality is back to normal. Obviously this is not something we all want to be doing. Can anyone do this test with their headset .. any brand and even some of you with Icons? It would be good to know if the culprit is the Bluetooth Headset or the iPhone. Remember, it's important that you make a call with your Bluetooth headset in the OFF position and then turn it on mid-call to use it.

  • Acrobat bookmarks are lost when resaving the file

    Hi,
    I am converting a docx to pdf using Save as --> PDF --> clicking on options and selecting create bookmarks using headings and publish.
    The conversion is done perfectly. However after encrypting, or changing a name of a bookmark and saving after that, the bookmark links are lost. When I right click on any bookmark and checking there link, there is nothing.
    I noticed that if I use Microsoft Word 2007 with SP2 this problem is resolved. However, I have various pdfs already converted (and don't have the original doc) which I need to encrypt. However this is not possible to do so as they lose their bookmarks.
    Is there a solution for this?

    I am seeing a similar bug in Acrobat, and I am seeing it in both Acrobat 7 and Acrobat 9.
    If I have an open PDF, and I choose File > Save As, then rename the PDF, all bookmarks are lost.
    Gone. Poof. Bye-bye.
    If I rename the file in Windows Explorer, the bookmarks are retained just fine.
    This happens without exception. Every PDF file.
    I simply cannot use the File > Save As command at all. Ever.
    First detected it in Acrobat 7, and I am still seeing this behavior in Acrobat 9.

  • How do I remove a space before the first word in a sentence using find and replace or GREP?

    Right, so I am laying out a document in inDesign from a word document and it has a space before every first word in a sentence. It is really annoying and I need a quick way to get rid of them. I wasn't too sure how to do it with find/change but I am sure there is a way in GREP if someone can help me. I have included an image so that people can see exactly what I mean.

    The ^ location works for all paragraphs.
    But a note to the OP, there is a sample script called FindChangeByList that removes leading and trailing spaces as well as extra spaces after punctuation, all in one go. But if you want to continue to use a GREP find/change to remove leading space, I'd modify Joel's suggestion to ^\s+ to get those cases where the user typed multiple spaces as well.
    And don't forget there are actually legitimate places for leading tabs, which both the script and this GREP will find and remove, so be careful.

Maybe you are looking for