Firsts time printing checks Quick Books with Lion.

After printing checks QB thinks it still has a print job blocking next print job. I've got the latest QB for MAC confirmed by asking for update. Printer Que does not show anything at all. The only way to clear error is to reboot QB, everytime I print checks, its first of the month I got a lot to do.

Hello Gordon,
Thanks for contacting Microsoft.
From your description, I learnt that you can't print documents on your laptop using office printer. And other users can print using office printer without issue. You also can print documents using your home printer. Please let me know if I misunderstand
your purpose.
Would you please reinstall the office printer in your laptop? After that, please test how the issue goes.
Besides, please help confirm that whether you can ping printer Server when the issue occurs.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

I am having trouble uploading an Aperture photographic book to Apple. The first time I tried "Buy Book" the order proceeded normally but when it came to uploading the book to Apple it "uploaded" for six hours without going through so I aborted the attempt

I am having trouble uploading anAperture photographic book to Apple. The first time I tried “Buy Book” theorder proceeded normally but when it came to uploading the book to Apple it"uploaded" for six hours without going through so I aborted theattempt and cancelled the order.
The second time I tried the samething happened so after nine hours I found that the "Quit Aperture"button had greyed out so I had to Force Quit. I do not know if the order wascancelled but I do not think that the upload was successful.
What can I do about this problem?

I also am not able to print a book. I have Aperture on two Mac, MacBook Pro (current) and a MacPro - both printed books prior to update 3.1.3 now all I get is the spinning ball then I have to Force Quit. I tried books I have ordered in the past (trying to print a new book) and they also failed. This is not a picture problem but a problem with 3.1.3 update. I would like to print some more books and give Apple some money but can't.
Any suggestions?
Ken

First time user of Mac(Book Air) and mouse sensitivity not high enough

First time user of Mac(Book Air) and one thing that has bothered me is when I use a generic USB mouse and I've set the tracking speed/sensitivity to the max and it's still not high enough and it just irritates me to no ends. Am I not doing something properly being a first time mac user? Thanks in advance for any response.

Depends on the mouse. "Laser" with shorter wavelengths are far too sensitive for me and need to be dialed down. IR is worthless in my opinion because they cannot move properly across a black/white checkerboard.
I actually (to my great surprise) love using the trackpad and hate to use the mouse because trackpad keeps my thumbs directly between my hands while typing. But that is just me.

Can I uninstall parallels 5 from a mac book with lion installed

can I uninstall parallels 5 from a mac book with lion installed

Just to add to the conversation with some helpful information.
Prior to install i was more worried about finding a Quicken replacement than anything (decided on iBank). I installed Lion and then realized as I was going through my system that Parallel 5 set up for my previous employer. As suspected, it did not work. So I upgraded Parallels planning to eventually set it up again in the future including reinstalling the version of windows. When I finally logged on with after the upgrade, all my files, etc. was still there. Shocking but true. Double check to see if this occured with any one else. Good luck.

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Just louded new version cat print from quick books internal error message coms up

just louded new version cat print from quick books internal error message coms up

I don't have a link handy, but as far as I know, the Acrobat 9 user guide is available online as a (guess what!) PDF you may download... or is on the disc if you bought physical media
Go to that PDF and search for compatibility
The PDF for version 8 covers setting the options to a previous version on pages 102-103
The words may (or may not) be different for v9
Adobe PDF settings
The Adobe PDF Settings dialog box in Acrobat Distiller contains panels of options that you can select to customize your PDF output.
General panel options
Use this panel to select a version of Acrobat for file compatibility and other file and device settings. (The panel appearance differs in Windows and Mac OS.)
Compatibility Sets the compatibility level of the PDF. Use the most recent version (in this case, version 1.7) to include all the latest features and functionality. If youre creating PDFs that will be distributed widely, choose an earlier level, to ensure that all users can view and print the document.

Does Print Shop 2 run with Lion?

Just upgraded to Lion. My old Print Shop for Mac does not work with the new system. Does Print Shop 2 work with Lion/OS X 10.7.2 on an intel based iMac?

What I am saying is that if you install it on a Snow Leopard disk and copy it over to a Lion disk it will work.
I have installed Lion on a separate disk and am installing software slowly, trying to figure out what works and what doesn't. When I tried to install the Print Shop 2 the installer on the DVD had the circle with the slash over it.
If you get info on it you will see that it is a Power PC application (just the installer itself). The Print Shop 2 is an Intel/PPC app and it works fine on Lion after updating to the latest update. (2.0.11).
I just drag copied the installed and updated Print shop to the Lion disk.
It floors me that they call it a universal application and then use a PowerPC only installer...
Hope this helps
bigbird

Hello! I try for the first time to edit a multicam with FCPX and wether I switch angle with 1-2 or with the razor, nothing happens on the timeline. What can I solve this problem please?

Hello! I try for the first time to edit a multicam with FCPX . I did all the sync, i can easily switch images. But nothing happens in the timeline when I use the razor for editing.
What is the preoblem please?

Russ H wrote:
This KB doc explains it better.
… the funny thing, this article and all other profound advice been found on the net, miss to mention a very basic advice:
first of all, a MC is clip as any other !
… sounds perhaps a bit … too basic , but - as an amateur like me, and using MCs almost any day - you should keep that in mind for your workflow.
After creating a MC, which can be done in seconds!, you get a single clip in the Events browser - and you should treat it as any other clip:
select parts of it, add it to your timeline, you can add it to secondary (for pic-in-pic for example), you can split it, shift it, nudge it, ...
aaaand you can select a diff. perspective = camera (or mic…), without losing synch.
I'm noticing, people spend way too much time in the multi-track timeline view of an MC, in hope, this gives them back those 'tracks' FCPX doesn't offer (for good reasons...)

Printing multiple envelopes from address book with Lion

I am having trouble getting envelopes to print properly from Address Book in Lion. I have specified size #10 envelopes. When I print them, the text printed on successive envelopes moves further and further down the page until the address drops off of one envelope and is then printed at the top of the next envelope. If I print to PDF, I see the same behavior. I have an HP Photosmart Premium printer. I didn't have this problem before I upgraded to Lion, and all my settings are the same as they were prior to the upgrade. I have seen that other users have the same problem on the forums, but there isn't a clear cut answer to how to solve the problem anywhere. I also tried using the easy envelopes widget, and I still have the creeping further down the envelope problem. HELP!!!

It seems to be a bug in Lion. Try the solutions provided in other disucssions about changing print size and orientation. Create a custom size and save it. You should be able to test it by printing to pdf first to check it. That way you won't have to waste paper.
https://discussions.apple.com/message/18390621#18390621
https://discussions.apple.com/message/18504818#18504818

I want to install hybrid drive in Macbook pro. I bought my Mac book with lion and am now running mountain lion. I was told I needed install disk to set up new drive before restoring from my time capsule.Is this correct and if so how do I get disk osx10?

I purchased a Mac book Pro in Aug 2012 with lion and have upgraded to mountain lion. I currently am looking to install the segate 750 gig hybrid drive. I watching video I shows me needing a OSX 10 disk to boot off of when the new disk is in and the use time capsule to restore system from back up drive to new hybrid. Hope I got this correct so far. that being said my Mac Book did not come with a disk therefore is one available, when I get to point of restoring from back up with it be the same mountain lion system I had. Sorr if this sounds redudant.. Thank you in advance

Connect the new hybrid drive to your MBP. Start up your MBP holding the OPTION key, the two HDD icons will appear. Select the 'restore' icon on the right. When you get to the menu where you have 4 options, select Disk Utility. Format the drive and then you can use the option of restoring it from Time Machine.
Ciao.

First time build check, with some questions

After much back & forth, I’m about to take the plunge and do my own build. It seems similar to many others here have done, and is pretty close to the VideoGuys DIY build, but it’s my first time and I do have a few questions, so I thought I’d post and get comments. Here are my specs:
Antec Twelve Hundred V3 Black Steel ATX Full Tower Unbeatable Gaming Case
ASUS P9X79 PRO LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with USB BIOS
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
EVGA 04G-P4-2673-KR GeForce GTX 670 Superclocked+ w/Backplate 4GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
CORSAIR Professional Series Gold AX850 (CMPSU-850AX) 850W ATX12V v2.31 / EPS12V v2.92 80 PLUS GOLD Certified Full Modular PSU
Intel BXRTS2011LC Liquid-cooled Thermal Solution For the LGA2011 Socket
VANTEC 2+1 FireWire 800/400 PCIe Combo Host Card Model UGT-FW210 (Ti chipset)
1 Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drives (media drive)
1 Western Digital Caviar Black 1 TB 7200 rpm SATA 3.0 (Boot drive)
1 Hitachi 7200rpm 1 TB SATA 3.0 (renders and exports)
64 GBof Crucial RAM - 8GB 240-pin DIMM DDR3 PC3-12800
• CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •
I plan on overclocking using the ASUS auto overclock feature. From what I’ve read 4.3 seems to be a reliable speed to shoot for. The videos I’ve watched on the auto overclocking with the UEFI interface look straightforward.
I’m going to use the 670 to power 2 editing monitors via DVI, and an ASUS P24A6 via HDMI as a client monitor.
For the foreseeable future, I’ll be editing AVCHD footage. Don’t do much motion gfx work, mainly cuts & dissolves, with a fair amount of color correction & grading applied. How does this system look to do with this configuration with this workflow?
Also, any feedback on cooling appreciated. It looks like the Noctura has some compatibility issues with this board fully populated with Crucial RAM, so I’m going with the Intel liquid cooler, which looks easy to install and was recommended by ADK. With this case and this cooler, will I be good or is there any other type of cooling I should add to cool the RAM or the PSU?
Anything else I’m missing? Thanks much to all who post here. Special thanks to ADK, their participation here is invaluable and the advice they gave me was much appreciated. Were this system my main source of income, I’d buy from them for sure.

Stu,
Looks like you have done a lot of work for this to be your first pass here as a build list; there is a lot more that looks right than wrong.
Regarding how is this system for your workflow? This PC would certainly do what you want it to do.
Regarding cooling, RAM and PSU will be fine.
Regarding is anything missing, yes a Blu-ray burner.
You did not state whether you want to A) build this and leave it alone for years, or B) make some upgrades in the future. If B), I only have a suggestion for your RAM choice. If A), I do have some suggested tweaks to how you spend your budget for this build.
You've heard it here before, but it is so true that Adobe has mastered the ability to tax just about all of your PC components (cpu, RAM, bus, drives, and video card) with Premiere Pro CS5 and above in order to make HD editing fast and fun. This makes balance important and in some ways a system is only as strong as its weakest link.
Your current plans strike me as:
CPU = A+, RAM = A+++ on paper, but possibly a bad idea, Drives = B-, GPU = A-.
My only strong suggestion is to go for 32GB of 1600 RAM. You want to do a moderately strong OC on the CPU and the memory controller of the 3930k is not strong enough to pull this off.
Minor suggestions: A) more drives - go for at least one 2x1TB RAID 0 array for media, projects, and scratch (adding one more drive). B) SSD for boot - for spending as much as you are here, I think your build deserves a 128GB SSD for the boot/OS drive - no this will not help after Premiere Pro has started and you are editing, but it will make the PC faster for lots of other things that most users do.
Regards,
Jim

HP laserjet M1120n MFP printer not functioning properly with Lion

After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
The printer is about 4yrs old.
Thank you

Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
You might try deleting the printer and reading it once the latest driver and software is installed.

How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

HELP!
So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
Thanks!
John

You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

My iPad Mini was locked up today (for the first time) on a boot screen, with a Debugger Message: Panic. Should I bother trying to fix, or return to store?

My iPad Mini locked up for the first time today. A boot screen, with among many other things, a Debugger Message: Panic. Is there a fix for this even though I can't seem to even get it to reboot past this error, or am I wasting my time and need to return it?

if it is still within the return period, return it. Why try and fix a new iPad.

Firsts time printing checks Quick Books with Lion.

Similar Messages

Maybe you are looking for