Fiscalyear/period single values loading

Hi Experts,
I have a problem in the query in which I have variable Fiscal year/period, when I try to load the varible value from selection and with single values for fiscal year period its getting stuck, I cancelled the varaible selection screen now i get message saying
Microsoft excel is waiting for another application to complete an OLE action.
Please advise what could be cause getting stuck when I try to load

Go to RSD1, give the infoobject name (Fiscal year/period)  -> Business Explorer tab -> Query execution filter Val. selection: u201CValues in the infoprovideru201D

Similar Messages

  • Error that "specify a value for variable posting period (single value entry

    hi
    My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
    However the same query appears to be working fine under different username.
    plz advise.

    Hi Abhinav,
    Just do one thing compare the Roles of two different users for which Query is getting executed and not.
    Check the Object S_RFC.
    Compare the Objects detail for Both the Users.
    Please Assign points if useful.
    Regards,
    Rajdeep.

  • How to avoid SYSTEM_NO_TASK_STORAGE  with multiple single values variable

    Hi experts,
    I am trying to do a distribution with reference data standart SAP function.
    Fields to be changed:
    ZPDHIER2 (Economic Group II)
    ZPDHIER3 (Economic Group III)
    ZPDCLIENT (Client)
    Fields for condition:
    KEY FIGURE NAME
    Fields for reference:
    KEY FIGURE NAME
    ZPDSTATUS (Status)
    FISCPER3 (Fiscal Period)
    The parameters group is like:
    Fields for condition:
    Key figure: ZM_070 (one of the key figures)
    Fields for reference:
    Key figure: ZMONT_TN
    FISCPER3: 001
    Status: DE
    - "Only distribute not assigned" is checked
    I do not want the data to be distributed by any ZPDHIER2, ZPDHIER3 and ZPDCLIENT so I have restricted these characteristics in the planning level by some variables. These variables are user exit type and return multiple single values.
    The issue regarding this message is that when I execute this function, depending on the size of the data brought by ZPDCLIENT user exit variable, this dump might or might not occur. As for the testing I've done, i realize that if the number of clients exceed 500, dump will occur.
    This multiple single values variable (or any other solution) must be prepared for 3900 clients, and this number is expected to increase.
    Anyone have faced same problem?
    Hope you can provide me some help regarding this issue.
    Tanks in advance,
    André Oliveira

    Hi Wadih saad,
    I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
    You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
    Make the available space and do the export it will work.
    Regards,
    Maheswaran J

  • How to hide a single value node hierarchy in the query designer

    Hi,
    I would like to perform a calculation  in the infocube. It concern  a count "Nb of different customers" with the following hierarchy : Country / region / City.
    This KF would be read at the same time by city, region and country, and  certain customers exist in 2 different region, and I have to count them only once by country.
    To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
    This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
    Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
    How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
    Is there another solution (more simple) to perform this in the infocube ?
    For information,
    1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
    2) I can't perform this in the report (performance problem with calculated KF).
    thx.

    Hi,
    the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
    Frank

  • Unable to enter single value for a variable in BPS

    Hi,
    I am using a variable for 'Posting Period' of type 'User defined values' defined in my Planning Area . I am able to input a range of values like 1-3, 1-12, 5-10 etc.
    But, my problem is that, when I have to give one value, ie 1-1 or 5-5, I am not allowed. Its gives a message that upper limit should be greater than the lower limit. Any suggestions?
    Is there a way, to define a variable in such a way that it can accept both ranges and single values?
    Regards,
    Srinivas Kamireddy.
    Edited by: Srinivas Kamireddy on Apr 1, 2008 8:08 PM

    Hi,
    we have this functionality overall in our system and i have not experienced,
    that the system tries to set the upper limit on it's on (why 12 and not for example 13?).
    How can you see that the system uses 12 as the upper limit?
    Regards,
    Kirill

  • In Report output, Missing Plan data with the Seletion option - Single Value input (more than 10 values)

    Hi ,
    I am running the Query (Actual Vs Plan) in the BEx Analyzer, with the input for the characteristic like Fiscal Year, Posting Period and Cost Center(20 Single value) it not comming up with the plan data - Actual data is coming up fine.
    If i gave 10 or less than 10 inputs ( single values input in the selection - option ) for the characteristic COST CENTER it coming up with all the data (Both plan and Actual).  if the COST CENTER input values more than 10, it not coming up plan data (Actual data is coming)
    Cost Center Variable is designed with an Authorization Variable.
    Can any one please help me to know why plan data is getting miss when the input limit more than 10 (single values input in the selection - option) in the Cost Center Variable? 
    An also could you please share that, What is the Max limit for the Single values and Range Value for an Selection - option in the BEx Variable.

    A)    Hi ,
                 In Report, I am having 2 variant.
    1.   For one variant, i have saved the input values for both the Select Single values & Select range for the cost center.
    8 Values in single & 4 Values in Ranges         
    It coming up with data successfully.
    2.    Another variant having input only for select single values for the COST CENTER, it contains 20 records (This variant also have restricted with the same values as above variant for COSTCENTER variable)
    Fiscal year                         : 2012
    Posting period                   : 8
    Cost Center                        : 20 values in Single                                             (Here I have separated the range values into single)
    It’s not coming up with plan data. 
    B)   If I gave only first 10 values in the Single value, Output for both actual and Plan are coming up…………. If I gave the Second 10 value in the Single value and got the Output for both actual and Plan.
    C)    I have also checked the following details of this query, 
    Executed the query in RSECADMIN and checked the Authorization log as below,
    Relevant Characteristics for Detailed Authorization Check  (Characteristics with Full Authorization Are Not Listed!)
      List of Effective Authorization-Relevant Characteristics for InfoProvider ZPCA_M36: 
    List Is Empty:
      There Are No Characteristics That Have to Be Checked in Detail 
              2.  Checked the Single value input by iteration, 1 to 10, it retrieves data.  More than 10 like 11, 12 … is getting failed to pull plan data.
              3. checked the selection Value range by iteration and I gave the range value count up to 25        inputs, its works fine.
    Thanks.
    Regards,
    Subashini.

  • Variable multiple single value filled with customer exit used in FOX form.

    Hi guys, I definitly need your help in the following scenario:
    I have variable (multiple single value) filled in a customer exit and use it in web template. There it is used in the drop down box for selecting a special date in the analysis item. And there comes the first question:Why the results from the customer exit are written in the way "date1; date2; date3" in one line? They should appear line by line in rows. How can I influence that? I tried both data binding types, "variable" and "characteristic".
    Now a button raises a planning function with a fox formula which should write the selected date (from the drop down box) in a customer table using "call function".
    I always get the error, that I need to restrict the variable to "single value". Why do I have to do that and if necessary how can I do that? Other planning functions without the fox formula also work properly with using the selection from the drop down box.
    I appreciate you help.
    Kind regards, Anja.

    Hi Vamsi.,
    Try this code.
    WHEN 'PREVIOUS_YEAR_1'.
    IF I_STEP = 2. "after the popup of user entry
    LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
    WHERE VNAM = 'ZCURRENT_YEAR_PERIOD'.
    break-point.
    IF SY-SUBRC EQ 0.
    WA_YEAR = LOC_VAR_RANGE-LOW+0(4). "Year
    WA_MONTH = LOC_VAR_RANGE-LOW+5(3). "Period
    WA_YEAR = WA_YEAR - 1.
    CONCATENATE WA_YEAR wa_month INTO WA_FISC_PERD .
    CONCATENATE WA_YEAR WA_MONTH1 INTO L_S_RANGE-HIGH .
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'EQ'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'BT'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    ENDIF.
    ENDLOOP.
    endif.
    Assing points if it helps you.
    -- Selva

  • Copy function errors when defining a range of fiscalyear/periods in variabl

    Hey Gurus,
    I'm trying to execute the copy function using two variables to copy from one fiscal year/period to another fiscal year/period.
    Two variables were created 'XXXXXX' = 001/2006 to 006/2006
    and 'YYYYYY' = 001/2007 to 006/2007.
    So in trying to copy plan data from  'XXXXXX' to 'YYYYYY', these variables are then defined in the paramter group. I get an error message stating that the variables can only be defined with single values.
    This has forced us to enter each fiscal year/period one by one in the parameter group.
    Has anyone come across this before, and can recommend a way around it instead of defining each fiscal year/period individually in the parameter group.
    thanks

    Hello Ehab,
    In your example, you were copying say 001/2006-007/2006 to 001/2007-007/2007.
    Using the above assumption, we observe that the periods are fixed but the years are not.
    We can therefore pass the from period as 001, to period as 007. From year as 2006 and to year as 2007.
    We are therefore passing only single values for each variable.
    In our foxcode, we can loop through each period and generate the new set of records for 2007.
    Hope this helps.
    Sunil
    PS: Assigning points is a way of saying thanks

  • Several single value selection in InfoPackage Data selection using Routine

    Hi,
    I am trying to extract data from a table(containing Ticket data) in R/3 using Generic extractor with table. As the table is not supporting the delta functionality i have to do daily full load for more than 5 lak records.
    I dont want all the tickets from R/3, i just need the tickets which are open. Unfortunately there is no field in R/3 table which indicates Ticket status. But in BW i have a DSO where i can get the tickets along with their status.
    Now what i want to do is:
    in the Infopackage i want to give the dataselection for ticket, whose status is open which will be calculated in ABAP code by lookup to the DSO. Is this possible?
    I know that in ABAP routine for Data selection we can give single values and range values. but here i just want to give several single values. That means if suppose i have 4 tickets T1,T2,T3,T4 in the DSO and if T1 and T4 are open tickets, then i have to get the data from R/3 just for T1 and T4.
    in the above case if we use range then the low and high values in the range will be T1 and T4 respectively and the data pulled from R/3 will be from T1 - T4 ie all T1,T2,T3 & T4. but i need just T1 and T4.
    Please share your ideas. also please send the code as i am not an ABAPer.
    If Several single value selection is not possible at least send the code for the range values.
    Thanks,
    Cnu.

    you can write a code like this in the ABAP routine in data selection in front of ticket characteristic
    types: Begin of s_ticket,
         ticket type <type of ticket characterisitcs>,
          End of s_ticket.
    data: l_idx like sy-tabix,
          wa_ticket type s_ticket,
          it_ticket type standard table of s_ticket,
          l_s_range type rsrdrange.
    You can declare
    read table l_t_range with key
         fieldname = '<your field name for ticket>'.
    l_s_range-infoobject = '<infoobject name>'.
    l_s_range-fieldname = '<field name of ticket cahracteristics>'.
    l_s_range-sign = 'I'.
    l_s_range-option = 'EQ'.
    select * from <ODS active table> into table it_ticket where status = <value for open status>.
    if sy-subrc = 0.
         loop at it_ticket into wa-ticket.
              l_s_range-low = wa_ticket-ticket.
              append l_s_range to l_t_range.
         endloop.
    end if.
    p_subrc = 0.
    you need to modify it as per your requirements, i hope this might help you.

  • Is usercertificate attribute single valued in OID?

    Hi,
    I am trying to post multiple user certificates to OID and the OID is
    putting only one value and not adding the other. The option whether an
    attribute is single valued or not is grayed out for the attribute property
    page. Is this attribute a single valued attribute in OID? Thanks.
    --ram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    dn:cn=config
    changetype:modify
    add:nsslapd-binary-mode
    nsslapd-binary-mode:This works for me too and is a bug. Only three values are allowed for nsslapd-binary-mode: auto, strict and compat51. Apps should not rely on this bug to be present in future versions (and it is not in 6.x). Moreover if you restart the 5.2 instance after setting nsslapd-binary-mode=empty, then you will see errors such as:
    [10/Jun/2009:11:22:32 +1000] - ERROR<4131> - Bootstrap config - conn=-1 op=-1 msgId=-1 - System error The entry cn=config in file /export/home/ggop/local/ds52p6/slapd-b/config/dse.ldif is invalid (error 1: Operations error) - nsslapd-binary-mode: invalid value '', allowed values are: compat51 or strict or auto.
    [10/Jun/2009:11:22:32 +1000] - ERROR<4128> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error Could not load configuration file dse.ldif.
    [10/Jun/2009:11:22:32 +1000] - ERROR<4129> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error Please edit the configuration file to correct the reported problems and then restart the server. Server exiting.
    Server not running!! Failed to start ns-slapd process.
    1. Client requests usercertificate attribute, returned text is "usercertificate;binary:: <binary data>"I think it's happening because the apps have always been setting the attribute using the subtype. But this behaviour seems to be an outcome of the bug, so should not be relied upon.
    The DSEE 6.x system responds the same way as above with the exception of the first case.
    Client requests usercertificate attribute, returned text is "usercertificate:: "This is by design
    are applications that request usercertificate instead of usercertificate;binary in violation of the LDAPv3 standard?I don't believe it's a violation to request the attribute without the subtype. However apps should not rely upon the bug in version 5.2 to be carried on to 6.x. If a request asks for usercertificate, then that's what it gets.

  • Web Report not printing the fiscal year period variable value

    Hi,
    In web report where in one text element, we enabled the fiscal year period variable value to display
    in the report result.
    If we run the report then this fiscal year period is displaying in the general information.
    We have print button (Java Code),  where user can take a printout of the same report.
    In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
    It is required to print the fiscal period also in the print out of the report.
    Any help to come out of this.....
    Thanks
    Srinivas

    Hi
    Any Help.....
    Srini

  • How can I make server use single class loader for several applications

    I have several web/ejb applications. These applications use some common libraries and should share instances of classes from those libraries.
    But applications are being deployed independently thus packaging all them to EAR is not acceptable.
    I suppose the problem is that each application uses separate class loader.
    How can I make AS use single class loader for a set of applications?
    Different applications depend on different libraries so I need a way that will not share library for all applications on the domain but only for some exact applications.
    When I placed common jar to *%domain%/lib* - all works. But that jar is shared between all applications on the domain.
    When I tried to place common jar to *%domain%/lib/applibs* and specified --libraries* attribute on deploying I got exception
    java.lang.ClassCastException: a.FirstDao cannot be cast to a.FirstDaoHere http://download.oracle.com/docs/cd/E19879-01/820-4336/6nfqd2b1t/index.html I read:
    If multiple applications or modules refer to the same libraries, classes in those libraries are automatically shared.
    This can reduce the memory footprint and allow sharing of static information.Does it mean that classes should be able to be casted ?

    You didn't specify which version of the application server you are using, but the config is similar as long as you know what to look for. Basically, you need to change the classloader delegation. Here's how it is done in 8.2
    http://download.oracle.com/docs/cd/E19830-01/819-4721/beagb/index.html

  • How can we Restict the Char single value Variables with , , =

    Hi Experts,
    How can we Restict the Char value Variables with <, >, <=  (without selecting Inverval or only passing single value)
    For Example
    We have a standard Query 0FIAR_C03_Q1005, in this
    New Selection
    "1 - 15 Days, Posting Date<=Key Date, Clearing Date>Key Date"
    This is restricted  with the
    Clearing(0CLEAR_DATE)
    <Clearing key date(0P_KEYD3)  It is a single value SAP Exit Varible
    PostingDate(0PSTNG_DATE)
      <= Posting keydate(0P_KEYD3)  It is a single value SAP Exit Varible
    When seeing these 0P_KEYD3, 0P_KEYD3 variables in the New selection screen they looks like  >0P_KEYD3, <=0PSTNG_DATE
    if you define any custom variables these are looks like =ZV_DATE.
    to enable < , >, <= symbols for variables what we need to do.
    In other way
    Say we created one variable ZV_DATE single value, processing type as customer exit.
    for this we populated current day,
    Now Requirement is we need to display the all the records which are <= current date,
    instead of passing low and high values, i want to restrict the calday <=ZV_DATE
    New selection
    0calday
      <=ZV_DATE
    How can we achive this, this is how the business content report having the restrictions
    Please sugget me.
    Thanks
    Chandra
    Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM
    Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM

    Ok,
    In the InfoObject 0calday in the query designer under the filter area, under characteristic restrictions right-click over that InfoObject (0calday).
    In the next window (select Values for [0CALDAY]  Calendar Day in the dropdown box for "Show" choose Value Ranges. Under the word "Between"  dropdown box select "Less than or equal to"
    Below that word click on the button of the dropdown box Select from list.
    In the new window select instead of History Variables and double-click on your variable ZV_DATE.
    Click on the right blue arrow to move it to the right.
    And there you go.
    Tip: It exists a SAP standard variable named 0DAT which is exactly the current date (don't need to use ZV_DATE variable).
    Diogo.

  • SQL to match a single value in a field with comma-delimited text

    I have a column that can contain none, one or many recordIDs
    (from another table) stored as comma-delimited text strings (i.e.,
    a list). I need to retrieve all records that match a single value
    within that list.
    For example, if I want to match all values that equal
    recordID 3, and I use ... WHERE MyColumn IN ('3') ... , I will get
    all records that have EXACTLY 3 as the value of MyColumn, but not
    any MyColumn records whose values include 3, if they are instances
    such as "3,17" or the like.
    Also using the LIKE operator -- as WHERE MyColumn LIKE '%3%'
    -- will get me unwanted records with values such as 35 or 13 ...
    Can I use some sort of intervening ColdFusion list processing
    to output only the desired records?

    Normalize your database so that your data becomes
    accessible.

  • I can't  exclude single value in cost center of S_ALR_87013611 report

    Hello all.
    I'm using the  S_ALR_87013611 report. I need select for 'cost center'  field. I press the button  'multiple selection' for cost center field but  don't exist  the tab 'Exclude single value' and 'Exclude Ranges'. Only exists the tab: 'Select single  Values ' and 'Select Ranges'
    thank.

    HI Guerrer
    Thats a limitation...
    The field Cost center is defined as a variable and thats why you are allowed to input the values at selection screen... Sets are used in these report for variables and you can enter only the required values.. It has no option for excluding values
    Regards
    Ajay M

Maybe you are looking for