Fish Eye Hemi plug in does not show in filter list of Photoshop 11
I cannot get Image Trends Fish Eye Hemi plug in to appear on the list of plug ins-filters in PSE 11. I used to use it in PSE 10. Does anyone have a solution?
Thanks
If you already ran the installer, then you can go to
(i don't why the installer doesn't see pse 11)
C:\Program Files (x86)\Image Trends Inc\Hemi 1.0
and copy the three plugins highlighted below to
C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
Similar Messages
-
Installed HP Color Laserjet 3600n software but does not show in model list
Recently installed the HP software for my Color Laserjet 3600n on my MAc OS X 10.5.5 laptop. The software says it is installed successfully, but when I try to set it up for printing via IP address, it says the ip address is valid, but at the bottom, iwhen I choose select drivers, my model does not show in the list.
Any thoughts?What IP printing protocol did you try, and what does it say to use in the manual?
Since it's not a postscript printer, I wonder if it uses More Printers > HP IP? (instead of IP printer) -
I cloud does not show Numbers app listed although I Cloud button in Numbers is on. Therefore unable to back up Numbers data.
Did you want a answer to this. I have also backed up my iPhone but files are not showing in Numebrs App on iCloud
-
When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett NThere are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR. -
I am using Macbook Pro, Photoshop CC, and Lightroom 5.
The problem is: When I start edit in photoshop from Lightroom, the adjustment in Lightroom does not showing up in Photoshop. This has never been happen before while using Photoshop 6.
I have tried to reinstall the products several times, including OS Yosemite. But it does not help.The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help
-
Custom Ribbon tab does not show in generic list
Hi.
I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
Thanks!
<Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
<CustomAction
Id=”Ribbon.MyTab”
Title=”Adds a new Ribbon tab to Generic List”
RegistrationType=”List”
RegistrationId=”100″
Location=”CommandUI.Ribbon.ListView”
>
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location=”Ribbon.Tabs._children”>
<Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
<Scaling Id=”Ribbon.MyTab.Scaling”>
<MaxSize
Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
Sequence=”15″
GroupId=”Ribbon.MyTab.MyGroup”
Size=”LargeMedium”/>
</Scaling>
<Groups Id=”Ribbon.MyTab.Groups”>
<Group
Id=”Ribbon.MyTab.MyGroup”
Sequence=”15″
Description=”"
Title=”My Group Name”
Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
<Button
Id=”Ribbon.MyTab.MyGroup.Button”
Alt=”Ribbon.MyTab.MyGroup.Button”
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
Image16by16=”/_layouts/images/siteIcon.png”
Image32by32=”/_layouts/images/siteIcon.png”
LabelText=”Button”
Sequence=”10″
TemplateAlias=”o1″
ToolTipTitle=”Button”
ToolTipDescription=”Shows a dialog” />
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition
Location=”Ribbon.Templates._children”>
<GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Layout Title=”LargeMedium”>
<OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
<OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
CommandAction=”javascript: alert('Hello World');” />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>Hello,
I was able to use your custom ribbon tab XML just fine. The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not. Anyway,
after replacing those with straight quotes and fixing some other misc formatting, it worked fine. I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file. In SP, I created a new custom
list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML. Just look for red squiggles in the editor and fix them.
Regards,
- Kemp Brown [MSFT] -
Mailbox does not show on Mailbox list on Mac
I am using Apple Mail and I recently created a new mailbox called "Pricing" on the Mac client. However, while the Mailbox/folder shows when I access it from my iphone, the Mailbox does not show on the mailbox list (left side panel) on the Mac Apple Mail client. How do I resolve this?
Under MAILBOXES left side of the Mac Mail window scroll down to the bottom of your list of mailboxes.
If you find Pricing, drag that folder up where it belongs alphabetically. -
My Ipod does not show in source list in itunes
I have recently downloaded itunes 7.7 (previously using 7.1) - my ipod is no longer showing in the source list in itunes although I get the usual clunk clunk sound when I attach it to the PC.
I have tried to re-set unattached from the PC and attached to the PC to no avail.
The only thing that I can think to do is to uninstall the ipod software and itunes and re-install both - but I will have to get some CDs first as I have a lot of tunes in the itune library which will be lost if I delete itunes.
Can anyone suggest anything else which may help please??
Thanks.I am having a similar problem. I have done the "5 R's" and even had my iPod replaced with a new one by apple (suspecting they couldn't solve the problem). But even now, with a completely new iPod, Windows (Vista) recognizes the iPod (as it did previously), but iTunes does not. The iPod displays that it is connected, but does not appear in the iTunes source list! Then, as soon as I disconnect the iPod (as there's no other way) then suddenly it appears and several error messages come up saying: "Jarad's iPod cannot be synced. The required folder cannot be found." !!! This is so fustrating!!!! Is there anyone out there who can help?
-
Aperture purchased in app store does not show in purchased list.
It shows as INSTALLED if looking at the app on it's individual page, but can't redownload it when it is not in the purchased list. How do I fix this?
It crashes on launch and I can't reinstall it. If I move the app to the trash, the indivual page shows the purchase price instead of INSTALLED. The other apps I have purchased show on the purchased page.Well this is getting very intriguing now. Unfortunately I can't see your computer's screen to verify it's not something simple... ie just not seeing the item.
If what you say is true, then this may be something engineering may want to look at. Whatever the case, let's contact iTS and start some correspondance with an advior for now.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Premiere Pro CC - Latest version, eye ball unchecked but does not show videoclip under?
in my timeline, I have 2 clips, one is above the other. When I uncheck the eyeball the video below does show. Also sometimes when I scrub the video, it wont move. It just stayes on 1 frame.
clips are cineform and other is origional from canon t4i
system
core i7 920
nvidia gtx 570HD
16 gig ram
1 drive with system & programs
1 drive videoclips
1 drive just documents
1 drive just photosHi dnmorgan924,
Thanks for your post. Please go to the below link and update the drivers for the graphics card and then relaunch the project again to see if it works.
http://www.nvidia.com/Download/index.aspx?lang=en-us
Regards,
Vinay -
IPhone 4s does not show in device list
and iTunes is blocked. When I disconnect iPhone iTunes restart. Charging is ok.
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/ -
Ethernet does not show up in list of interfaces
Hello, we have a customer with an iMac and they are having issues with the wired connection on it. Occasionally, it will just say "disconnected" when they go to system preferences, network. I had her remove the connection but when she goes to readd it, "Ethernet" is not in the list of interfaces. I did the same steps on our Mac Mini and it indeed was a choice. They have used wired networks in the past. The local Mac cafe has fixed this previously by resetting a preference file, how would this be done? I researched the issue but wanted to be sure, and be able to tell them for sure whether this would clear their wifi settings or not.
If there are no other LR’s installed on your computer, and you have logged out of CC Desktop and rebooted, then LR5 CC should be available in your CC Desktop apps list and available at https://creative.adobe.com/products
No LR that you install from the cloud will ask for a serial number so if a LR is, then it is the trial from www.adobe.com <http://www.adobe.com> and that needs to be uninstalled. If need be, installed the non-CC version, again, then uninstall it, just to make sure it’s uninstalled properly. -
so which one do I delete?
You probably only have an orphaned entry left in Add and Remove programs and only have the last update of the Firefox 4 version installed. It happens more often that the updater doesn't remove the entry from the previous installation, but only adds a new entry for the new, updated, version leaving you with two entries. You can use a registry cleanup program or remove the registry key yourself if you are comfortable with editing the registry.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox (????) -
I cant view my shared photo stream from my source list. This is preventing me from adding or removing photos. Any ideas?
Old Toad wrote:
Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream in iPhoto if both devices are signed in to the same iCloud account..
OT
And it seems you must do this every single time the shared photo stream is updated, ie. photos added/removed. this is pīss poor. -
I have Elements 12 and editing toolbar does not show trying to fix pet eye
i watched the video on how to remove pet eye and the video shows a tool bar on the left for editing, including checking pet eye box. This does not show on my elements nor does it look like the video. Please help.
Thanks.ziemski wrote:
under rectangular marquee
That means you have the rectangular marquee tool selected and not the red eye tool.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.
Maybe you are looking for
-
Using Anchors and Count in Report
Hello, In a report I am using two rows and a count variable if data in 1st row is null then the 2nd row must move up when we anchor but it's not happening can any body help me. Thanks & Regards, Dinesh .M
-
I can't get my HP Officejet 4620 printer to work with Mavericks. Any suggestions?
-
My iPod is corrupt. It won't show up in iTunes 7, and therefore I can't restore it. Help needed quickly. Windows XP
-
Hi everyone, Thank you in advance for your help with this. I'm using Dreamweaver CS4. I have created an SQL table which lists 20 people. For each person (row) there are extra pieces of information (columns) such as Name, Email Address, Job Title an
-
Example Here On this website there is a list of different items. Picture of it and then the name. When you put your mouse over it, an image shows up where the mouse is, that follows the mouse. Is this possible to do in Dreamweaver?