Fit Custom Width won't go below 87%

Right now I'm reading a book and I'm trying to find a comfortable zoom level. This is the problem I'm running into:
1. Fit Single Page looks to be a zoom factor of about 40%. It's slightly too small for me.
2. Fit Width look about 150%. It's far too big for me.
3. Fit Custom Width won't go below 87% for this particular book and several other books I've tested.
It seems that the most comfortable zoom level for me is in the 40% to 87% range, but I can't find a way to get there. Is there a way?
Thanks,
Harrie

A quick (and rather unclassy) workaround is to set the the mode to single page fit and then adjust the size of the viewing window (the document should scale accordingly) to your liking. This will only bring the zoom level up to something good if you have a relatively large monitor. (Be sure to hide the side panel by clicking on the little arrow around half-way down the side panel). Hope that helps for now!

Similar Messages

Stroke width won't go below 1pt.

Hi all.
I have a problem with illustrator. The stroke width won't go below 1 pt. It makes no difference if i choose a lower stroke weight in the dropdown menu, or if I type it in. I have tried the solution with both comma's and dots, same same.
Specifications:
Mac OSX Danish
Illustrator CS5 English
Any ideas?
Best Regards
Esben Rahbek

You are welcome, Esben.
The setting is the default for certain kinds of documents, such as those for Web & Devices.
This is all hearsay: I am still with 10.

Resizing images in a div to fit browser width

i have a page with rollovers in a DIV:
http://toddheymandirector.com/REEL/index_newlook.html
i want the the images, "nike the getaway", etc, to resize to fit the browser window width. i tried putting them in a div and adding
row {
    max-width: 100%;
    height: auto;
    width: auto\9; /* ie8 */
but it didnt work..
ideas?
thanks

You could try something like the below. Basically it will show a maximum of 4 images per row (25%) so:
if your image width is 300px, for the browser to view all 4 at 100% their window needs to be 1200px wide
if their browser window is smaller than 1200px, the images will start to move onto new rows
if the browser window is bigger than 1200px, it will scale the 4 up to fit the width.
You can change the width of the images to match your optimal browser window and/or change the percentages to see the effect it has.
Eg, if you remove the "min-width:25%;" from #gallery ul li it will not scale the images at all. If you change "min-width:25%;" to "width:25%;", it will always show 4 images in a row and scale up or down to fit the window.
Best thing to do is play around until you're happy. Good luck.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
body{
    background-color:#666666;
    margin:0;
    padding:0;
#container{
    width:100%;
    height:auto;
    margin:0;
    padding:0;
#title{
    width:100%;
    float:left;
    color:#FFFFFF;
    font-family:Arial, Helvetica, sans-serif;
    font-size:140%;
    line-height:150%;
    margin-bottom:30px;
    text-align:center;
#gallery{
    width:100%;
    height:auto;
    margin:0;
    padding:0;
    float:left;
#gallery ul{
    width:100%;
    height:auto;
    margin:0;
    padding:0;
    float:left;
    background-color:#666666;
    list-style-type:none;
#gallery ul li{
    min-width:25%;
    display:block;
    margin:0;
    padding:0;
    float:left;
    background-color:#666666;
img{
    display:block;
    border:none;
    margin:0;
    padding:0;
    width:100%;
</style>
</head>
<body>
<div id="container">
<div id="title">This is a floating web gallery</div>
<div id="gallery">
<ul>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
<li><img src="nike.png" /></li>
</ul>
</div>
</div>
</body>
</html>

How to auto fit column width?

Hi experts,
When I design a input schedule, I find a problem, some columns can auto fit column width when I input numerics, some columns can not! how can I fix my input schedule and let all column can auto fit column width?
best regard
Evans.

Evans,
      If you are using standard template and which is not working for 2 data ranges.
      I think you can customize using VBA Macros. It is possible using Macros. I'm not sure is it BUG from SAP.
     Try to put VBA code in AFTER_REFRESH i guess.
      You can VBA Macro code mention below.
      for Column D: Columns("D:D").EntireColumn.AutoFit
      For all Columns: Cells.EntireColumn.AutoFit
      For Only Data Ranges: Determine columns from data range using VBA code and use VBA code given for Column .
Thanks,
Ben.

Fit Table width/height to Margin

It would be a great handy feature if the table width could be fitted to the margin of the page.
Moreover 'tables' need some more extra features like : distribute rows/column evenly to fit table width/height. At present this feature extends the table width/height when applied. Once I fix the width and height of the table, distribute rows/column must fit to that width/height only. The table should only extend when I add rows or column.

>I have a 2-page site for a customer and have set it up as
tables (from
> Photoshop CS to Dreamweaver MX).
Bad start. Read this for a better approach -
Taking a Fireworks comp to a CSS-based layout in Dreamweaver
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Then read this -
http://apptools.com/examples/pagelayout101.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jonclyde" <[email protected]> wrote in
message
news:gfenmb$dek$[email protected]..
>I have a 2-page site for a customer and have set it up as
tables (from
> Photoshop CS to Dreamweaver MX). The first page opens
fine with the table
> occupying 100% up and down as required, but clicking a
link to the second
> page
> causes the table to shrink in size, even though (as far
as I can tell)
> both
> pages are virtually identical when it comes to layout. I
did one page,
> then
> copied it to make the second page. Check it out for
yourself here:
> www.jonathanstewart.com/chc/index.html. I can get the
second page
> (Services) to
> open properly only if I set the target to _blank. Check
the far right and
> bottom of screen on both pages. The bar at the bottom
should rest on the
> bottom
> of the browser window whatever the window's size, and
the bar at the top
> should
> extend "off the page" at both left and right. Any ideas?
>

I am trying to print out information on a Google Maps page. I have the print setting on fit to width but the page does not print that way and some of the page that would normally show on page 2 is missing.

The page prints out fine on Internet Explorer, but not on Firefox. 2 pages are supposed to print out but only 1 prints. Also it does not fit to width even though that's the setting.

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

Pdf file, How do I fit by width in landscap mode on iphone?

In landscap mode, pdf file show full page and I have to zoom in everytime. I want to fit width when put in landscap. How to??

Doesn't seem to be a setting for this in iBooks 3.1 (tested on both an iPad [3rd Gen] and iPhone 4S both w/iOS 6.1.3)
However, a little experimentation reveals -- it depends on the PDF.
If the PDF is text (I used 'PowerShell in Action' - a programming book) you can use the same method as Mobile Safari - Double tap in the text and that section expands to fit the width of the screen in landscape or portrait. Centered on where you tapped in the text.
If the PDF is a single image - like a PDF comic book (I used a volume of 'Girl Genius'), it appears that the double tap to expand doesn't work. If the PDF is already full width, a double tap does appear to shrink it back to full page view.
Unfortunately, this seems to be on a per page basis. When you flip to the next/previous page it goes back to full page view.
Note: There are other PDF viewer apps/apps with PDF viewers built in that behave differently, more like you are looking for. Some are even free.
Hopefully Apple will improve this in the next version.
And, of course, the obligatory disclaimer - YMMV with different PDFs, versions of iBooks, and iOS and this is just a random comment on the Internet. Not warrantee expressed or implied. And my employer (which is not Apple) has no idea I just wrote this.

CRVS2010 Beta - Fit to Width WPF Viewer in code-behind

Does anyone know if there is a method that I can use in code behind
to make the report in the WPF Viewer fit to width??
I need this cause I want the report to fit to Width every time I resize my window.
Thanks

Hello,
Try following
CrystalReportViewer1.BestFitPage = true;
Thanks,
Saurabh

After 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.

fter 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.

SadVZW wrote:
fter 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.
When you complete your current contract, Verizon has options on which incentives you would like to take.
You can sign a new 2 yr service contract by purchasing a new phone at a considerable discount(~$400+).
You can also choose to purchase a new smartphone on Edge at full retail cost for which Verizon will give you either a 37.5% or a 62.5% discount(depending on your data allowance) on your monthly line access fee when on the More Everything plan.
If you choose to simply continue using your current phone on the More Everything plan, Verizon ALSO offers the same 37.5%/62.5% discount(depending on your data allowance) on your monthly line access fee.
Of course, as with anything else, there are some which always want more of a discount than what is offered.
Hopefully, after you get used to the rates with your new provider, you won't then want MORE which they likely won't be willing to give you.
Good luck with the new provider.

Maximize page to fit screen width

Hi,
I would like to maximize all the pages of the application to fit the entire screen size i.e. effect similar to F11.
Please let me know how it can be done at application level.
Thanks.

@fac586,
Thanks for your reply. I have been asked to check the feasibility of this feature. I just gathered the complete details.
Its a Org specific Knowledge search kind of application. So the users will be employees of that org.
The employees mostly use Mozilla Firefox or Internet Explorer and versions might be latest (or) one or two versions lower. We can also display a note in the browser and suggest them to use Mozilla(if required).
The main purpose of the full screen mode is we want to utilize maximum screen space to show the pages, as there are lot many regions displayed over there.
If there is a better way to show the page in full screen or use max space, we are ready to go with it.
<li>Which browser(s) and browser version(s) is this application going to run on?Mozilla Firefox or Internet Explorer and versions might be latest (or) one or two versions lower. We can also restrict them to use Mozilla only.
<li>Which operating systems?User will be in Windows XP in most cases. I assume its OS of the user here.
<li>Is it an intranet application that will run in a controlled environment?Yes it is.
<li>An internet application that anyone can run?No.
<li>How is it deployed? As a desktop icon in a controlled environment? As a link on another site? On a standalone kiosk device?Users will be provided with URL for the application. Its deployed in apex.oraclecorp.com
<li>Do the users expect it to run in full-screen mode? Do they even know what full-screen mode is? Do they know how to get out of it and back to their desktop or other apps? Will they want to run it in full-screen mode?Since the requirement is to have all the regions displayed comfortably in the page, without scrolling the page full screen mode is used. We are planning to have a button in the page, which will exit the full screen mode and move to normal mode so that users can perform regular activities with browser.
<li>Are there any accessibility concerns to doing this?The purpose of the full screen mode is we want to utilize maximum screen space to show the pages, as there are lot many regions displayed over there.
If there is a better way to show the page to use maximum space, we are ready to go with it.
<li>How will this work across multiple devices? Screen sizes? User font settings?We have not thought about this yet. Whatever may be the screen size or display settings the user have, it should expand to fit screen width.
Please do let me know if require more information on this.
@Joel_C,
I am a newbie in APEX and Web applications and to these forum categories too. Though the disclaimer claims, it hurts.
If I had known its a browser specific functionality earlier, why wouldnt I mention it ealier and end up in multiple iterations to get a solution to my query and waste valuable time of fac586?
No one can become 'Guru' in the way you have mentioned. Atleast I havent. Its through hardwork and continued contributions one can attain this position.
You might have also crossed this stage when you started with web applications. I am not a born genius and just a learner.

Fit to Width not working when linking directly to page number

I have set my initial view to Fit to Width. If I link only to the file, the document fits to width. However, when I add a specific page number to the link, the document opens up the full page. It does not fit to width. Is there something else I need to set or is that how it is supposed to function? When I add destinations, the fit to width seems to work fine.

Try adding the view=fitH parameter like:
http://example.org/doc.pdf#page=72&view=fitH,100
www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf

Auto fit column width for subtotals

Hello,
We created subtotals using member sorting & grouping in EPM report. some reason Auto fit column width is not working for sub totals.
Any idea or any one encounter similar issue?
Thanks,
Srinivas Thota

Hi Raju,
I checked notes but i dont see any details in SP16 patch 01 documentation.
The note 1683111 related to SP07.
Thanks,
Srinivas Thota

Getting an image to fit across width of browser

Hi
Im trying to get an image to fit across width of browser - I thought i could do it as you would a shape ie size image until red line appears both sides so it will fill automactially as same as a shape. However when I do this it just isnt working - it doesnt stretch across width of browser.
I do realise that I can use BROWSER FILL - however as i already have an image for footer i've used this function which works well. Ive also tried combining the image and my footer as one large image using browser fill - however this doesnt work as when the image is scaled up on a large monitor it puts everything out, as it is just treating it as one large background image.
So my question is - is there anyway I can get an image thats placed to fill browser width without using browser fill?
Many thanks in advance
Paul

Hi,
It works, but when I try this, my image is cut in the length (cutting is different, it depends on witch screen you look).
He don't scroll in image.
Specifications image
Fill (image): filling
Site properties:
Scrollbars browser: always (vertical, horizontal)
Anybody an idea?
Thanks!

How to set custom widths for a particular report column?

how could I set a custom width for a particular report column? Is there a way to do it using css?
Thank you.

Hi Leland,
I have tested this here: [http://apex.oracle.com/pls/otn/f?p=267:18]
All I have done is add the following into the report's Region Header:
<style type="text/css">
#apexir_EMPNO {width:200px}
#apexir_ENAME {width:200px}
#apexir_DEPTNO {width:200px}
.apexir_WORKSHEET_DATA TR TD {height:100px;}
</style>The headers have all be set to be left-aligned. Each column should be 200px wide (even though I'm setting the width on the headers, it will be applied to the entire column unless a cell's contents is wider, in which case the column is made wider). The final entry above adjusts the height of all TDs within the IR table.
Andy

Is there a way make a full width menu that opens with a custom icon like the link below?

I've been trying to make a hamburger menu that just has a custom icon to open revealing the sections of my site with links.
Huge. Digital agency. Digital business, design, marketing, technology
Anybody got any tips?
Thanks

You can use a lightbox composition

Fit Custom Width won't go below 87%

Similar Messages

Maybe you are looking for