Fit Gap Analysis

Hi, can anyone give me some real time scenarios of gaps in SAP HR?

Hi,
Gaps in business processes can be identified based on available system functionality. It depends on each customer how they would like to handle the Gaps. Some like to change their process to fit the system functionality and avoid custom developments, some handle the gaps by developing a custom solution with in the system.
Here's a simple example:
If business requirement says - employee should be able to request Sick leave only in  increments of 0.5 days at a time in ESS, R/3 settings will allow to record absences less than a day, but does not restrict with any messages to request in increments of 0.5 days.
So, business can choose to tell employees to record only in 0.5 day increment by avoiding the custom validation development in ESS, or create a custom validation in the ESS application, restricting the employee to record only in increments of 0.5 days.
Thanks,

Similar Messages

  • What is fit gap analysis?

    Hi
    What is meant by FIT  GAP  analysis ? any example ,documents?
    What is cut short methodology ?
    Pls full points will be rewarded.
    Send details at :[email protected]
    Message was edited by:
            chandrakanth nammi

    HI , refer below reward if helps, sent the mail
    Fit gap analysis as the name says it is not a complete upgrade doc. to fit in the gap between the new and existing system from which we are going to migrate to the new system we run an compare and document in the changes that need to be preformed in then new system.

  • Can you provide some real time example of Fit Gap analysis .

    Hi all,
    Can you provide some real time example of Fit Gap analysis related to Functional.
    Regards
    Reddy

    hi,
    In my opinion and experience both functional and technical staff playkey roles in the fit-gap meetings and in the subsequent review of thefit-gap deliverable (which lists business requirements, fits, gaps, andalternatives to fill the gaps). Ideally the technical staff possessessignificant functional / business experience at least with that moduleso that he/she can help determine the cost/effort/technical scope if acustomization or interface is the preferred way to fill a particulargap. The fit-gap goes a long way in determining the overall scope ofthe implementation or upgrade project and is a critical success factor.It also needs to be completed very early in the project so thatresulting customizations and interfaces can be designed, created, andunit tested before the system test phase.
    Thx,
    waseem

  • Very urgent-gap analysis -two examples

    please explain me with examples of gap analysis and how do you fill the gap
    and also there are two movement types in schedule line cat , what is the purpose of two
    early responders will be definitely rewarded
    thanks & regards

    GAP Analysis
    A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage.
    Cut Over Plans
    Detailed plans need to be developed for cutting over from the old system(s) to the new. Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
    Train Users
    Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced. Therefore the more effort you put into helping the users master the system early the better. Fit gap means, before implementing the SAP all the business data is in the form of documents, we cannot keep this data as is in the SAP. There should be a gap. So by filling this gap, we make configuration with the help of these documents. This is called as fit gap analysis.
    GAP Analysis
    A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    Examples:
    1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
    2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
    through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage.
    Ex, The functionality that is not present in Standard SAP and adding it to suit the business requirements. In Credit memo request document type, creating Credit block automatically for those Credit memos above Rs 5000.
    ***reward if this helps**

  • Sample tamplates on Gap analysis and Resolution

    Hi Gurus,
    Can any one send me sample tamplates on Gap analysis and Resolution. My Email ID [email protected]
    Thanks & Regards
    Sasikanth.Ch

    <b>mail sent reward if helps</b>
    <b>GAP Analysis</b>
    A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage.
    Cut Over Plans
    Detailed plans need to be developed for cutting over from the old system(s) to the new. Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
    Train Users
    Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced. Therefore the more effort you put into helping the users master the system early the better. Fit gap means, before implementing the SAP all the business data is in the form of documents, we cannot keep this data as is in the SAP. There should be a gap. So by filling this gap, we make configuration with the help of these documents. This is called as fit gap analysis.
    GAP Analysis
    A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    Examples:
    1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
    2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
    2 gaps are,In customer master data the client requirement needs legacy customer number which can be solved with User exit.,
    In sales order we need customer Phone number,We can use userexit
    These 2 are gaps which we cant find in Standard SAP
    1. if client want new field in customer master like nearest fire station ..
    2. order will be uploaded directly with out va01. through BDC... bcoz lot of orders if they get daily, they can opt these...
    Movement type 1 uses when a material have two movement types.. like example 101 and 261.. one is incomeing raw material and and going for production...
    Message was edited by:
            SHESAGIRI.G

  • GAP ANALYSIS AND TICKETS

    hi Gurus,
    I need some 6 real time examples relating to Gap Analysis and Tickets of SAP SD. Please could you send me all the details with the scenarios and solutions to my email if [email protected]
    Thanks,
    Farhan.

    Hi Farhan,
    Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
    Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprint [AS IS Process] stage.
    A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and auctioned,
    1. GAP must be closed and customized software can be developed
    2. GAP must be closed but software cannot be written therefore a workaround is required
    3. GAP does not need to be closed.
    A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
    Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirement and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    Examples:
    1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
    2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
    A2. A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can and can't do. For each gap there will be one of three outcomes which must be recorded and actioned.GAPs must be closed and therefore customized software can be developed to close the gap. In some cases GAP must be closed but software cannot be written therefore a workaround is required in other words a business process change is recommended to the client.
    In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications (ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
    Actual gap analysis is time consuming and it plays vital role in blue print stage.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • How to do GAP analysis ?

    Hi Experts,
    How to do GAP analysis ? I have a BW problem statement about SD module. I have to do a GAP analysis. I am doing it for the first time. So any suggestion about the approach to start it ?
    Thanks

    The gap analisys is the analisys on what are the difeerences between actul system and what the customer want to develop.
    GAP Analysis in simpler terms refers to study of existing state of system and desired state of system, there by identifying the gap between states. In the context of SAP, GAP analysis is very important before implementation of SAP system. The implementation team should study what is that an SAP system can provide for each business process and what is the actual business process. One should evaluate each such gap and should find out the ways to fill the gap. The gap might be filled in different ways: System enhancements, custom ABAP code development, interfaces with some other external systems. etc.
    In the Enterprise Systems field, GAP Analysis is a process done while bleprinting the solution and aimed to discover the gaps between the user requirements and the "off-the-shelf" (or packaged) solution. For example you want to implement an ERP system , you do a GAP Analysis to assess gaps between the processes supported by that System and the process as executed by the organization that will be implementing the solution.
    In the SAP BI area, we do a GAP Analysis to map between our logical and physical BI solution design and the Business Content that SAP offers. Business Content is a set of preconfigured BI objects aimed to save us valuable time when developing BI solutions by providing the "best practices" for that functional domain.
    The reason we do a GAP analysis in BI is to find out whether we can save ourselves a lot of time by implementing a Business Content solution instead of developing from scratch.
    In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
    Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business BlueprintAS IS Process stage.
    A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
    1. GAP must be closed and customised software can be developed
    2. GAP must be closed but software cannot be written therefore a workaround is required
    3. GAP does not need to be closed.
    A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
    Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    Examples:
    1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
    2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
    for more info check these links
    Re: A bit confused with your Gap Analysis example
    http://www.9000resource.com/what_is_gap_analysis/what_is_an_iso_9001_gap_analys_1.php?gclid=CMKw-6fh0YoCFRsRQQodczGGew
    http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/Management/ASAP_Links.html
    Re: gap analysis

  • GAP ANALYSIS URGENT INTERVIEW QUESTIONS PLEASE .

    Hi Everybody ,
    Tell me more about GAP analysis and business requirements ? why it is required ? why it is need and some really scenario .
    thanks - Sameer .

    Here is Some useful info given earlier on SDN Forum on GAP Analysis:
    Simply Gap Is Nothing But,
    Client Requirement Doesn’t Meet With The SAP Application,
    The Distance Between Actual And Existing/Supporting,
    E.g.: On Purchase Of Material-X, The Other Material Will Get 50% Discount, Which Sap Doesn’t Support,
    Commission Paid To The Agent Also , Not Supported In SAP,
    To Fill This Gap, We Use The Enhancements,
    These Enhancements Divided Into Exits,
    Like
    User exits,
    Field Exits
    Screen Exits &
    Menu Exits.
    These Enhancements Used To Update The Standard Program In Its Respective Business Transactions, Used As A Gateway To Meet The Client Requirements.
    Refer below
    In n simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
    Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business BlueprintAS IS Process stage.
    A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes, which must be recorded and auctioned,
    1. GAP must be closed and customized software can be developed
    2. GAP must be closed but software cannot be written therefore a workaround is required
    3. GAP does not need to be closed.
    A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
    Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirement and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    Examples:
    1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
    2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
    gap analysis
    Gap analysis?
    Gap Analysis
    Regards
    Bala

  • Template doc regarding Gap analysis of SAP BI -MM

    Hi Gurus,
    Can any one send a template doc regarding Gap analysis of SAP BI -MM

    HI,
    Gap Analysis:
    In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
    Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprintstage.
    A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
    1. GAP must be closed and customised software can be developed
    2. GAP must be closed but software cannot be written therefore a workaround is required
    3. GAP does not need to be closed.
    A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
    Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    GAP Analysis
    Re: gap analysis
    Re: gap analysis
    Tarak

  • Regarding GAP Analysis.

    Hello guyz,
    this is hawkin. can anyone describe the proceedure of GAP Analysis,
    1> what is GAP Analysis
    2>In which phase of implementation it is done
    3> Are there any navigational steps for these..
    4> can u people expalin with good scenario.
    thanks and Regards,
    Hawkin.

    Hi Hawkin,
    In information technology, Gap analysis is the study of the differences between two different information systems or applications, often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space. Among the various methodologies used to perform gap analysis is IDEF, a group of methods used to create a model of a system, analyze the model, create a model of a desired version of the system, and to aid in the transition from one to the other.
    The Gap Analysis Fit is a step inside an ideal business blueprint of a BW project implementation (but, clearly, the same concept can be applied to several situation...).
    During this step, after having collected all the client's requirements, you have to higlight what you need (or what you can) to use to build what the user wants.
    In this analysis, you find that a business content datasource (found via help.sap.com or after the SDN's forum suggestion or...) can provide almost all the required fields (since a datasource is a collection of several fields..).
    Anyway, notwithstanding this, you realize that this datasource is good only for a 95%, because it's missing the info related to the customer (usually shown with 0CUSTOMER object, but you can use a ZCUSTOMER or something else...the only important thing is that you need this info!).
    Ok, you know that in order to fit this gap, you have to build your own enhancement with a little userexit to fill this missing field: THIS IS THE GAP ANALYSIS FIT !!!
    This explanation applies also to a std cube, to a std query and so on...
    Sure, you use std business content, but why you ask "why does he say the source system doesn’t provide it" ???
    The std objects can't provide always all we need, but only, if we are lucky, a part (more or less) of it...and at this point you need to perform this kind of analysis...
    plz check this link..
    Re: LO-Cockpit  V1 and V2 update
    Thanks,
    Sudhakar.

  • A bit confused with your Gap Analysis example

    Hi Robert,
    As I analyzed your Gap Analysis example, I getting a bit confused.
    In your message below, with the 0 in the 0Customer, aren’t you already (by BW convention), assuming that 0Customer is a <b>standard business content object</b>?
    ... but you also in the same statement noted that “..and <b>std business content</b> doesn't provide it in your extractor…”
    I am thinking, it is a business content object already, why does he say the source system doesn’t provide it?
    Also, what were you referring to as “in your extractor” did you mean in  the “source system”?
    <b>Quote from Robert</b> “Gap analysis process has to be performed when you know that you can use a std business content extractor (or cube or something else) and you have to compare it yo your actual requirements: do you need 0CUSTOMER and std business content doesn't provide it in your extractor...well, now you have done a gap analysis !”
    ====

    Caud,
    sorry, but I think that Praveen explanation doesn't exactly match with what do you need to know...
    The Gap Analysis Fit is a step inside an ideal business blueprint of a BW project implementation (but, clearly, the same concept can be applied to several situation...).
    During this step, after having collected all the client's requirements, you have to higlight what you need (or what you can) to use to build what the user wants.
    In this analysis, you find that a business content datasource (found via help.sap.com or after the SDN's forum suggestion or...) can provide almost all the required fields (since a datasource is a collection of several fields..).
    Anyway, notwithstanding this, you realize that this datasource is good only for a 95%, because it's missing the info related to the customer (usually shown with 0CUSTOMER object, but you can use a ZCUSTOMER or something else...the only important thing is that you need this info!).
    Ok, you know that in order to fit this gap, you have to build your own enhancement with a little userexit to fill this missing field: THIS IS THE GAP ANALYSIS FIT !!!
    This explanation applies also to a std cube, to a std query and so on...
    Sure, you use std business content, but why you ask "why does he say the source system doesn’t provide it" ???
    The std objects can't provide always all we need, but only, if we are lucky, a part (more or less) of it...and at this point you need to perform this kind of analysis...
    Hope now is clearer...
    Bye,
    Roberto

  • Gap Analysis - Reg.

    hi sap experts...
    what is the fit gaps in sap, could you tell some fit gaps in sap please......
    sai ram
    Last warning: Respect the rules of the forum

    Hi,
    Gap analysis is the difference between AS-IS process and TO-BE process.
    e.g. Cosultants should propose work arounds for this.
    Rgds
    Murali. N

  • Gap analysis template request

    Team -
    Can you please send a BI GAP analysis template to [email protected]   ... Apprecaite your help and thanks in advance.
    Message was edited by: Vara Kuppam
    Message was edited by: Vara Kuppam
    Message was edited by: Vara Kuppam

    HI,
    Gap Analysis:
    In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
    Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprintstage.
    A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
    1. GAP must be closed and customised software can be developed
    2. GAP must be closed but software cannot be written therefore a workaround is required
    3. GAP does not need to be closed.
    A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
    Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
    The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
    GAP Analysis
    Re: gap analysis
    Re: gap analysis
    Tarak

  • AUC- Asset Under Construction - Gap Analysis

    Hi Guru's,
    I have a requirement to know the Gap Analysis on Asset Under Construction. 
    We are under Analysis Phase where i have to find out the Gaps related to business.
    I received a Reporting FD and asked to find out the data source.
    Please provide the Gap Analysis steps to over come on this specific requirement.  
    Based on my analysis i found multiple tables to derive the AUC - Asset Under Construction solution.
    Tables that involved to get the Asset Under Construction:ANLA, ANLZ, PRPS, ANEP, BPDY, T093B
    My Questions:
    Is there any SAP Standard Data Source for AUC- Asset Under Construction.
    Now in my high level requirement we are pulling the information from multiple tables.
    Please provide me suggestions how can i go ahead with the above requirement.
    Regards,
    Ganni

    Depends on how the FICO guys have configured AuC
    If they have chosen a separate asset class for this (as what tends to happen) - then the std asset data model will cater for this
    Just run the std content reports or build your own for the asset class of AuC

  • Gap Analysis

    Hi,
    I am trying to create a purchasing report with Vendor, Buyer, Plant and Calender Month and with keyfigures # Created, #Closed, and #Processed. I did some research on standard business content. These fields are available in some cubes, queries, and info sources.
    I got struck where to begin with standard business content. I have these following questions:
    1. Where do I need to start? Do I need to start from creating a Custom Info cube, Custom Query ?
    2. How to make use of this standard business content?
    I know how to create everything from scratch with custom Data Source, Info Source, and Info Cube and Query. But I dont know how to make use of the standard business content.
    Appreciate if somebody can give me an example or explain me the procedure or point me to some documents.
    Thanks in advance.
    Raj Peddisetty.

    OK, you say "We have only Production Database", and your requirement is "to develop Developement Environment and QA Environment". Here is your gap analysis.
    Tables, fields procedures etc available in PROD - All of them
    Tables, fields procedures etc available in DEV - None of them
    Gap between PROD and DEV - Everything
    Tables, fields procedures etc available in PROD - All of them
    Tables, fields procedures etc available in QA - None of them
    Gap between PROD and QA - Everything
    Tables, fields procedures etc available in DEV - None of them
    Tables, fields procedures etc available in QA - None of them
    Gap between DEV and QA - Nothing
    HTH
    John

Maybe you are looking for