Fit Guide Problem

BB fit guide says that Jenson VM9412 does not fit my truck ('04 Dodge 1500 Quad) but Crutchfeild says it fits. The radio specs say it is DIN wich is what should fit my truck. I want to buy it from BB for the price but not sure what to do. Any help?

The pink brakelight wire is necessary.  On most units it can be hooked up to a ground instead and it will make it so you do not have to have the brake on to watch video.  Shops are legally not allowed to let your car leave without it hooked up properly.  However if you ask most local install shops before they install it they will hook up a wire with a wire connector attached under the dash by your brake pedal, and then you just unattach the wire that goes from the unit to the brake light and connect it to the wire they left for you with the connector on it.  Then you don't have to have the brake on to watch, and the shop is not liable for installing it illegally.
I always have any equipment I don't install my self done by a local car stereo shop.  I'm not sayin that all big stores (BB, C City, HH Greg, etc.) are the same but I have heard SO many horror stories from them.  They do not require much experience to work there installing, and most local shops are involved in competitions, shows, etc.  So they have experience doing all kinds of stuff.
And don't use the BB car fit guide.  Its garbage.  ALWAYS use Crutchfield's, or ask a local shop.

Similar Messages

  • Fit guides to margin

    Hi All,
    I am working on InDesign CS3.
    We can create a guide  manually by using Layout>Create Guides menu items then a dialog is popup and ask following things
    1.  Row or Column Guide
    2. Number of Guides
    3. Gutter
    4. "Fit to Page" or  "Fit To Margin"
    I can create a guide by processing the command kNewGuideCmdBoss, In this command I can specify the orientation of guide (Horizontal for rows and vertical for columns)
    (1) & (2) are handled by this command.
    (3) is also solved
    On (4)
    By default this command fits the guide to page
    fit guides to margin?
    To handle this I process the command kSetGuideFitToPageCmdBoss by settings it IBoolData interface to false and true but it didn't not helped me
    Anybody solved this problem then please let me know
    Thanks and Regards,
    Alam

    Hi All,
    I have used kNewGuideCmdBoss command for creating a guide.
    I need to handle two cases for creating guide
    1. Fit To Page
    2. Fit To Margin.
    I haven't found any option in this command to handles the above two scenerio
    If anybody have the solution/Idea then please help me
    Thanks & Regards,
    Alam

  • Best Buy's Vehicle Fit guide question

    I want to install a car stereo in my 2007 ford explorer 4 door, heres the stereo I want to install,   
                                                                                http://www.bestbuy.com/site/olspage.jsp?skuId=9197111&type=product&id=1218056226183
    It said it would fit, then I checked again a while later, and it said it doesn't fit, I don't get this, I heard their fit guide is very inaccurate, does it fit?  I hope so, any help would be great.  I actually ordered it off another site  for 185 dollars, much cheaper than what best buy wanted, and this is just the stereo, instalation is another 90 bucks I believe. 
    Just to mention one thing, best buy wouldn't let me post the message because it said "The message body contains ______, which is not permitted in this community. Please remove this content before sending your post."  Weird.  I can't type the word out, it won't let me post if I do, but a hint, its the name of a rain forest in brazil.

    Hello alex145,
    While we do our best to provide accurate information about which mobile audio equipment will fit in your vehicle, occasionally the information can be conflictory as you discovered.  When this occurs, it's best to consult the manufacturer -- Pioneer in this case -- for their recommendations.  Their response would be definitive.  I hope this helps.
    Regards,
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Epub 3 fixed layout – "guide" problem

    Hello, where is problem when I am trying to upload fixed-layout book via iTunes Producer and I get error:
          "ERROR ITMS-5107: "Fixed-layout books must supply a guide." at Book (MZItmspBookPackage)".
    The guide in OPF file is on right place and well formatted.
    See:
    <guide>
       <reference href="Text/page1.xhtml" title="Cover" type="cover" />
       <reference href="Text/page1.xhtml" title="Story start" type="text" />
    </guide>
    In iBookstoreAssetGuide 5.0 is no information about another guide.
    Thank for any advice
    P. S.: Google didn't find anything

    Hi fazeelaabuzohra
    EPUB 2:
         OPF file:
    <guide>
              <reference type="text" href="Text/page1.xhtml"/>
    </guide>
    or EPUB 3:
         OPF file:
    <manifest>
      <item href="nav.xhtml" properties="nav" id="toc" media-type="application/xhtml+xml"/>
         nav.xhtml
    <?xml version='1.0' encoding='UTF-8'?>
    <html xmlns:epub="http://www.idpf.org/2007/ops" xmlns="http://www.w3.org/1999/xhtml">
      <head>
        <title></title>
      </head>
      <body>
        <nav epub:type="landmarks">
          <ol>
            <li>
              <a epub:type="bodymatter" href="page1.xhtml">bodymatter</a>
            </li>
          </ol>
        </nav>
      </body>
    </html>
    You must set the version in OPF:
    EPUB 3:
    <package ...  version="3.0" ... >
    EPUB 2:
    <package ...  version="2.0" ... >
    I hope you will understand now

  • ****Standard Set Top Box/Menu Guide Problem****

    I have a question concerning the interactive guide for a standard receiver. (Keep this in mind: I have my own DVD recorder and like to record three different shows daily while at work on three different channels with one at 8am, one at 11am. and the other at 1pm. during the day while I am at work). II I know you have reminders as an option but as I understand it, if I am not home to OK that reminder when it pops up, it will not switch to that channel. SO...does the interactive menu on your standard receiver have a function where I can set it up to switch to those three channels/programs everyday while I am away? In other words have an auto-tune? Does the standard receiver have the DVR tab in it's menu on there too and because I don't have a DVR it would just switch to that channel for me (and have options too like start 4 minutes early and end 5 minutes late from scheduled time) like I want and simply not have any DVR device to record to? My cable company has exactly that. The guide thinks it recording to a DVR device when in fact it is n't and gets the job done by switching the channel for me so my own personal DVD recorder gets the correct shows recorded. Please let me know back on this as its very important for me to know. Thanks!

    I think the answer to all of your questions is no.
    Only way I have heard to do what you want is to have a DVR that can control the STB. Usually done by adding an IR dongle that you put in front of the STB. DVR sneds a signle out and changes the chanel on the STB for you. Just have to remember to leave the STB turned on.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • MAU Enhancement Guide Problem

    Hey,
    I´m trying to get acquainted with developing ME/MI applications. Therefore I have read some documentation around the whole system. Then I started with the MDK-Tutorial and made it until the end. But that tutorial is more for learning to create SyncBO´s etc, but less for developing frontend applications.
    So I´m working with the enhancement guide for MAM and MAU. Making the easy look & feel changes is not a problem, but now I come to the part where I have to write new business logic etc(orderlists with equipments).
    I should write a new "onLoad-method" to read enhanced data from the backend, but I don´t know all the methods, object-types etc. used in the "onLoad-Method" of OrderList.java...
    Can anybody tell me, how I can easily learn to change/expand MAM/MAU applications? I´m familiar with java. Is there a special API? Do you know good tutorials?
    Thanks for help!

    Hi Peter,
    ok, I´ll try to describe my problem a little bit more specific!
    (If You have the Guide, the example "modifications" starts on page 69)...
    The practise is to add a new field to a list on the frontend application. In a previous unit I have added a new implementation to the BADI for the Equipments SyncBO, including a new field called "ZZ_EQUI_SORT". After replicating the SyncBO, you can see the field by pressing the "enhancement" - Link on the equipment detail screen.
    Now, I should add this field to the orderlist screen (like the enhancement guide tries to explain as next).
    Therefore I have to create a ZListDef.xml file with the new column for the equipment-sort-field.
    After that, and now I have my problem, I should enhance the view controller "OrderList.java" and name it "CustomOrderList.java". Like it is described in the guide, I have to extend the onLoad-Method of this new OrderList class with the the normal orders information + the equipments field.
    That is all information, the enhancement guide gives me to that change.
    So how exactly can I do that? Just use the action from the onLoad-Method of EquipmentList.java? Or can you tell me how to proceed now?
    I hope that this describes my problem a little bit more closely.
    Thank You for any answer!
    Cheers Arne

  • Resizing/moving MovieClips to fit screen problem

    I'd like to make an Android and iOS app with Adobe AIR, but I found a problem I can't solve.
    The Flash document size of the app is 800px x 600px, and I'd like to resize MovieClips to fit Android's and iOS' screens, suporting the Retina display on iOS devices.
    I tried using StageDisplayState.FULL_SCREEN and StageScaleMode.SHOW_ALL, and this does seem to work with static MovieClips, so the snippet would look something like this:
    import flash.system.Capabilities;
    import flash.events.Event;
    import flash.display.StageScaleMode;
    import flash.display.StageDisplayState;
    stage.addEventListener(Event.ENTER_FRAME,process);
    var difN:Number = (((stage.stageHeight*stage.fullScreenWidth/stage.fullScreenHeight)-stage.stageWidth)/2);
    function process(e:Event):void {
              difN = (((stage.stageHeight*stage.fullScreenWidth/stage.fullScreenHeight)-stage.stageWidth)/2);
              stage.scaleMode = StageScaleMode.SHOW_ALL;
    stage.addEventListener(KeyboardEvent.KEY_UP,useFullScreen);
    function useFullScreen(e:KeyboardEvent):void {
              if (e.ctrlKey) {
                        switch (e.keyCode) {
                                  case Keyboard.M:
                                            stage.displayState = StageDisplayState.FULL_SCREEN;
                                  break;
    obj.x -= difN
    However, I'd like to use classic tweens in my application, and this won't work since most of the elements are moving.
    I'd like to rescale/move MovieClips so they don't look distorted and every moving item moves correctly, showing all the content and trying to not make any borders. I read this article but it seems like it doesn't support classic tweens: http://www.adobe.com/devnet/air/articles/multiple-screen-sizes.html.
    Thanks for the help.

    1. scaleMode only has an effect when you embed your swf in an html AND you publish for a percentage.
    2. you need to resize your displayobjects using code and/or in the ide.  if you open your document settings panel (modify>document) and change your stage size you are offered some scaling options.  see if any work for you.

  • 1Z0-051 SQL Fundamentals 1 Exam Guide Problem with loading HR schema

    Hi,
    I’m new to Oracle Databases and have started studying with Oracle Press 11g SQL Fundamentals 1 Exam Guide 1Z0-051.
    The book is good except the problem I have is the HR schema they talk about is made up off seven tables (Countries, Departments, Employees, Job_History, Jobs, Locations and Regions).
    But the HR schema that I get is only made up off 4 tables (Bonus, Dept, Emp, Salgrade).
    Can anyone who has used this book please advise what I’m doing wrong and how I can get the correct Schema please.

    Hi,
    Well I haven't used that book but with whatever little I know , I shall try to attempt the question.
    There was an ancient schema for Human Resource, SCOTT which is haivng 4 tables only. Since 9i, there were an introduction of new schemas like HR ( Human Resource), OE( Order Entry) and so on. So the book is referring to that.
    Now when you create the database using Database Configuration Assistant, there comes an option with a check box, that do you want to create sample schemas or not? If you select that option, you get all these schemas in your db. If not, you only get the old SCOTT schema.
    If you have missed creating these schemas( which I belive is the case) than you need to manually create them. Here is the description for how to create them manually.
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28328/installation.htm#sthref20
    HTH
    Aman....

  • FPGA module guide problems

    On page 21 of the attached guide that we have on our computer, we encountered an error in the "Acquiring Data from the FPGA" section.  We cannot do step 13.  When right-clicking the read/write control function, there is no option labeled "full."  We were also wondering where the blocks labeled "clock config" go, since in step 7 on page 20, the tutorial asked to place the VI, though it is never shown in any figures in the guide.  Can anyone help with any of these problems?
    Attachments:
    5640R_GS1.pdf ‏417 KB

    If you are having problem see here

  • Smart Guide Problem

    Smart guides 'intersect,' (two interweaving paths) does NOT seem to appear anymore –(when 'ADD Anchor' has been selected).  A degree of accuracy is lost...  Eye strain increases..........

    Adobe Illustrator – (2014)
    Problem solved temporarily...
    Reverted back to 2013. This handy function has either been removed (smart guide label) or 'simply' didn't install properly... Everything else seemed alright.....

  • Guide Problems

    There is no Guide information, it has been unavailable since last night.  What is the problem?

    The guide and Video on Demand (VOD) require an Internet Connection.  I am not in front of my STB if you press the Menu button you can  find various customer support or help options and one being system information or system test.  It will let you know if you have a good Internet connection.  If you do you may want to reboot the STB and/or router to see if that fixes the issue.  
    Jim

  • CS4: Fit Image Problem

    Recently had a very bizarre issue that just happened. Not sure why, but it won't go away.
    I use the Fit Image script quite a bit. For sizing images that will end up on the blog, batching out files for proofs, etc. I have it written into many of my actions.
    Up until a few days ago, if you opened any action that I've recorded and expanded out the Fit Image step, you would see the dimensions (in pixels) that were recorded. Then, I started getting an error message for any action that used Fit Image. The error message was "Javascript code was missing".
    I checked my scripts folder and the Fit Image script is there. Nothing has changed. I even used Time Machine to go back a few weeks and see if anything had been deleted. Nothing.
    I tried to write a new action using Fit Image and now, instead of the expanded view showing the size in pixels, it's showing in inches! When I manually use Fit Image, the dialog box comes up with pixels ONLY, so why is it that the recorded step is shown in inches?
    I've gone so far as to uninstall CS4 and reinstall it. The first thing I did was record an action and I'm getting the same results. Why would this just change and does this mean I have to re-record all my actions that use Fit Image?
    Any ideas or insight?

    The problem come down to the fact the the way scripts are recorded in actions the full path of the script is recorded. If you un-install CS3 its script directory will be deleted so the script is gone CS4 script is in a different directory.
    CS2 and prior recording of the plug-in fit image were recorded as step Fit Image not as a script path step.  These actions should still work for when Photoshop starts up the CS4 Fit Image scripts register as the plug-in Automate>Fit Image.  When these action  are played and the plug-in step Fit Image get played it is looking for the registered Fit Image Plug-in Photoshop should run the CS4 Fit Image Script.
    The bug in Fit Image is very minor.  One day I used fit image on a image that was 1080 x 1080 and fit image was set to 1200 x 1200 the resulting image turned out to be 1201 x 1200 one side was one pixel off there were 1200 extra pixels.
    Reading the CS3 Fit Image Script I saw this:
         docRatio = docWidth / docHeight; // decimal ratio of original width/height
         // NOTE - ccox - 17 Aug 2004 - I added the rounding by 0.5
         // this should solve reported cases of fit image being off by 1 (always under)
         // NOTE - elr - 3 May 2006 - keep original aspect ratio
         newWidth = width;
         newHeight = ((1.0 * width) / docRatio) + 0.5; // decimal calc
         newHeight = 1 * newHeight; // make integer
         if (newHeight > height) {
              newWidth = 0.5 + docRatio * height; // decimal calc
              newWidth = 1 * newWidth; // make integer
              newHeight = height;
    Someone fixed fit image not to be one pixel under.  I thought this fix most likely cause my one over problem so I stuck in some alerts to see the numbers. Looked like the multiply by one to round did not round and I thought the .5 value perhaps would work better if it were .4.  So I changed to code to
         docRatio = docWidth / docHeight; // decimal ratio of original width/height
         // NOTE - ccox - 17 Aug 2004 - I added the rounding by 0.5
         // this should solve reported cases of fit image being off by 1 (always under)
         // rounding by .5 seem to make some sides 1 Px large change to .4 and used math round to round JJMack
         // NOTE - elr - 3 May 2006 - keep original aspect ratio
         newWidth = width;
         newHeight = ((1.0 * width) / docRatio) + 0.4; // decimal calc
         newHeight = Math.round(newHeight); // make integer
         if (newHeight > height) {
              newWidth = 0.4 + docRatio * height; // decimal calc
              newWidth = Math.round(newWidth); // make integer
              newHeight = height;
    The name of my script file is "My Fit Image.jsx" I renamed Adobe file to "Fit Image.jsx.Adobe" My script is in My Photoshop Script tree which I linked to Photoshop's Presets\Script\ by placing a shortcut to my tree into into Photoshop's Script directory. "My Fit Image.jsx" registers itself as Automate>Fit Image...
    $$$/JavaScripts/FitImage/Name=Fit Image...
    $$$/JavaScripts/FitImage/About=Fit Image   Version 10.0   By Quality Process^r^rCopyright 2007 Adobe Systems Incorporated. All rights reserved.^r^rResizes a document constrained by the given bounds.^r^rJohn J. McAssey Modified Version^rFixed the one side one pixel to long problem^rand changed the interpolation Method used^rUpsizing will use Bicubic Smoother^rDownsizing Bicubic Sharper^rInstead of just using Bicubic for all resizing like Adobe did.
    automate

  • Converting JPG to PDF causes Fit Width problem

    Hello,
    I'm using Acrobat 8 Pro on Vista, Core 2 Duo, 3 GB ram, plenty of storage space, etc...
    I have about two hundred JPG images (500 to 700 KB each) that I want to convert and combine into a single PDF document. I clicked on Combine Files, Add Folder, selected Larger File Size and continued from there to create the PDF. But the resulting PDF document has a problem when viewed in Reader or any other PDF viewer. The problem is, when I switch to Fit Width view, only the first 3 pages/images fit the width of the screen. All the following pages/images actually get smaller than a Fit Page view.
    Does anybody know why this is happening?
    Thanks.

    Are you viewing the images in "Continuous" mode (you can see more than one
    page in the window at a time)? The JPEG images may be of different
    dimensions, and in continuous mode the page width zoom is set by the width
    of the first visible page. Changing out of continuous mode will allow the
    zoom to change for each page width as you scroll through the document.

  • Constrained lm fit: having problem

    So…
    Here is my problem (Using LabView 8.5) --
    I want to use constrained LM routine for iterative re-convolution
    fitting program (attached). I started with a simpler LM routine and it works
    well. It gives correct values for one exponential decay after re-convolution
    fitting.
    But when I replace this with a constrained LM routine and try to run
    it gives error: 
    (see the second LM is replaced with constrained LM and prameter bounds are also added)
    Error -20039 occurred
    at NI_Gmath.lvlib:LM get new coefficients.vi
    The number of columns
    in the first matrix is not equal to the number of rows in the second matrix or
    vector.
    I’ve put in three min and max array or vector (in the lower
    and upper bound of parameters).
    Looking forward for help to resolve this problem.
    Thanks in advance.
    Attachments:
    Fit_ExpDec1.vi ‏44 KB
    exp_decay.vi ‏30 KB
    flscn_lt_ph11.txt ‏12 KB

    The problem is in the model function.  After the convolution the size of the output array f(x,a) is not the same as the number of data points.  This causes a series of functions to fail in the contrained LM code, yielding a very unhelpful error message far away from the error condition.  We will fix that error handling.  The unconstrained LM code does not fail, but only uses the first 750 data points (arguably a worse behavior that is harder to debug, but seems to have worked for your problem).  The fix is to modify your model function to output the same number of points as your y-data.
    -Jim

  • Google Play closes on start after ICS upgrade on Arc S, accounts and sync empty, setup guide problem

    I upgraded my arc s to ics 4 days ago, i used google play for the first time after upgrade today. It closes on start. I checked Accounts and Sync, my google account is not there, the whole list is just... empty. I tried the setup guide, at the step they ask to connect to services and sync, i clicked the google button, click and click and click, nothing, all the other icons work (like facebook), i searched for gmail app, non existent....... Seems too late to ask for help but im repairing my phone using pc companion now, hope everything works again.... just powered on my phone, i have a feeling nothing will be changed... really sad that Sony didnt realise this.... i cant access google services at all....plain weird
    Solved!
    Go to Solution.

    if I were you I would repair the phone with SUS and see if that solve the issue
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

Maybe you are looking for