"Fit Image" CS-5 upresing with "don't enlarge" checked

I have been trying to use the new "fit image" action and embedding it in an action. Even with the "don't enlarge" box checked it will make an image bigger.
Is this a known issue? Am I doing something wrong.
I'm trying to limit images of mixed resolutions to a maximum of 4600px on the long side. I have an action with 4600x4600 fit image embedded (with "don't enlarge" checked) and it will make a file that's 2000x3000, 4600 on the long side.
Then I tested Fit Image stand alone. With the "don't enlarge" box checked it will still enlarge an image even one at a time. It seems like the "don't enlarge" check box does nothing at all.
ARRRGGGG.
Any suggestions.
Thanks,
Tom

Thank you.
Please, please let the people in India in Tech support know. I spent more than an hour with them trying to make them understand it wasn't something wrong with my installation and that there had to be a bug in the software.
Tom

Similar Messages

Lr 5.3 bug with "Don't enlarge" option.

Very nasty bug. I have a lot of 5D Mark3 raw files cropped in various proportions 2:3, 3:4 and 1:1, then want to export final result with some Max size. On the export screen I select Resize to Fit: Long Edge, set size to 4000 pixels and marked Don't Enlarge as I don't want to upscale 1:1 images. As result, the resize doesn't work at all, full images come out with original size such as 5760x3840. The resize work properly when "Don't Enlarge" unchecked, but it does upscale smaller images, which isn't acceptable. What is Adobe solution for this case?

Aleksanders wrote:
What is Adobe solution for this case?
Fix in Lr5.4, to be released soon - probably.
In the mean time, you can:
* fall back to Lr5.2
* divide exports into 2 (those that need resizing and those that don't)
* use Exportant to take care of problem automatically (Miscellaneous filter - Prevent long dimensions).
Rob

Don't Enlarge --- not working

Hello, I have an export to a flickr photostream set up (very handy by the way).
I have edited the settings to leave most of my photos alone, but to limit my multiple-shot panoramas from going over 10000px on the long edge.
The exact settings are:
Image Sizing
Resize to fit: Checked
"Long Edge" selected from the drop down
Don't Enlarge: Checked
10000 pixels
Expected result: images under 10000px on both edges remain untouched, while images with a width and/or height over 10000px get scaled down to 10000px on their long edge.
Actual result: all images are scaled to 10000px on their long edge.
Please help me resolve this issue
-mitch

Well, Jeffery's plugin has the same issue.
Edit: as an update both the standard and jefferys flickr plugins work (only resize large images) when the Quality slider is used instead of specifying an absolute maximum filesize.
ie, this works:
while this does not:

A script to increase the minimum canvas size? (Like Fit Image, but with just my canvas)

For starters to be clear, I'm looking to manipulate canvas size. Not image size.
I want to create a script to automatically increase the width and height of my canvas in Photoshop to a specific size when necessary. I only want this to happen if my canvas is less than that specified size. For example: Let's say my canvas size is 300x250. I want the canvas to be at LEAST 600x600. If I run my action it will increase the canvas size to 600x600 for me. If I run this same script on an image where the canvas size is already 700x700, it won't do anything at all to it because both the width and height are equal to or greater than my target size.
It would also need to work with the height and width on an individual basis. If my image is 400x800, the action would increase my width from 400 to 600, but it would leave the height of 800 alone. So the final canvas size will end up being 600x800.
It's kind of like the "Fit Image" option in Photoshop, but I only want to manipulate my canvas size, NOT my image size.

It is possible.
But if you hope that the dialog remembers the last settings that would require storing those values (which could be done with a txt-file at some pre-defined location), but it would make the Script a bit more complicated.
// resize canvas in either direction if it is below a defined minimum;
// 2011; use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
// dialog;
var dlg = new Window("dialog", "increase width and height if under", [500,300,750,380]);
// filter for checking if entry is numeric, thanks to xbytor;
numberKeystrokeFilter = function() {
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\d]/g, "")
          if (Number(this.text <= 0)) {this.text = 5};
          this.text = Math.round(Number(this.text));
// fields for entry;
dlg.hor = dlg.add("edittext", [14,15,88,35], "600", {multiline:false});
dlg.hor.onChange = numberKeystrokeFilter;
dlg.horText = dlg.add("statictext", [93,15,118,35], "px", {multiline:false});
dlg.ver = dlg.add("edittext", [129,15,210,35], "600", {multiline:false});
dlg.ver.onChange = numberKeystrokeFilter;
dlg.verText = dlg.add("statictext", [215,15,240,35], "px", {multiline:false});
dlg.hor.active = true;
// ok- and cancel-button;
dlg.buildBtn = dlg.add("button", [13,45,118,68], "OK", {name:"ok"});
dlg.cancelBtn = dlg.add("button", [128,45,240,68], "Cancel", {name:"cancel"});
// show dialog;
dlg.center();
// show dialog;
var myReturn = dlg.show ();
// proceed if ok-ed;
if (myReturn == 1) {
var myDocument = app.activeDocument;
// set to pixels;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
// set the minimum values;
var minWidth = Number(dlg.hor.text);
var minHeight = Number(dlg.ver.text);
// get current ones;
var theWidth = myDocument.width;
var theHeight = myDocument.height;
// resize canvas;
myDocument.resizeCanvas(Math.max(minWidth, theWidth), Math.max(minHeight, theHeight), AnchorPosition.MIDDLECENTER);
// reset;
app.preferences.rulerUnits = originalRulerUnits;

HT1386 After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.

After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.
Can anyone help.

Can anyone help on this?

Fit image: always in centimeters instead of pixels?!

Hi
I'm desperatly looking for a solution to following problem: I want to batch resize images WITHOUT using the "image processor". So I recorded some "Fit Image" steps. In the past they actually got recorded with the unit "pixels" but with CS4 all pixel values get recorded as cm. I already set my ruler units to pixels but it doesn't matter. All actions get recorded in centimeters.
This also happens with other actions.
How can I record my actions in pixels?
Thanks

Thanks.
Yes but it gets recorded like this (in centimeters):
I'm recording either via the record button in the actions windows or by double clicking the entry you see above. It DOES work on my machine but as I often record actions for co-workers these actions won't correctly run on their installations.
The problem with the Image Processor is that I can't control when the resizing is done. If I want to do some actions before resizing I can't do it with the IP.

How to fit image inside canvas Container?

Hi All,
I want to fit an image inside a canvas.
Making x and y to 0 of image is not working.
My problem is I am rotating image at 90 and I want to save that image. If i save normally it is not taking rotation.
So I am adding that image in a canvas and saving that canvas with rotated image.
Somehow some portion of canvas still remains empty after adding image to it.
Any idea how to perfectly fit image inside canvas?
Or How to rotate image bitmap data with maintainig aspect ratio?
Thank in advance

Mx component don't handle rotation very well. Spark Group should handle it
better.
You may need to set the y to the height of the rotated image (its original
width).

CSS Menu incorporated into Image. How is it done?

Hello everyone I hope your weekend if proving fruitful!
I have a little problem with Dreamweaver. Basically it is this:
I have created a banner in Photoshop with a gorgeous artwork image (I am pleased with it to be honest!). To add to its aethetic appeal I have decided to incorporate a CSS Menu into it. Please note the menu will not be at the top (in other words ABOVE the image) or below the image.   I am wanting to position it around 200 pixes from the top.
The technique I have used so far is this:
Create image in Photoshop
Use the slice tool to slice the image and slice the part where I want my CSS Menu to go
Save as "Html and images"
Import into Dreamweaver and remove the part that has been sliced for the navigation bar
Insert a div tag at insertion point and apply my bar
Please note I am okay at putting the html coding and css into the right place (I think!) but the problems I am having is that it seems disjointed and the menu bar is not fitting seamlessly without gaps into the image.
Would a possible solution be to slice up the image save only as "images" (no html) and then incorporate parts of the image (e.g. top, middle, bottom) into div tags and incorporate the menu bar that way?
Please note I am new to this so please don't laugh too hard at my stupidity!
I'll catch you later!
Thank you
Jake

No need to slice the banner image. Simply put your banner in the background with CSS.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 document</title>
<style>
/**CSS Reset to fix the box model**/
    margin: 0;
    padding: 0;
    -webkit-box-sizing: border-box;
    -moz-box-sizing: border-box;
    box-sizing: border-box;
body {
    background:#CCC;
    font-size: 100%;
    font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
    padding: 0;
    width: 1000px; /*adjust width in px or % as req'd*/
    margin: 0 auto;/**with width, this is centered**/
header h1, header h2 {
    font-size: 26px;
    color: #999;
    display: inline;
    text-align: right;
    padding: 2%
/**TOP MENU**/
nav {
    min-height: 200px; /**same as banner height**/
/**banner in the background**/
    background: #198EBA url(http://placehold.it/1056x200/198EBA/FFFFFF&text=Banner.jpg) no-repeat;
nav ul li {
    list-style: none;
    margin-top: 150px; /**adjust where desired**/
nav li {
    display: inline-block;
    margin: 0 2%;
    font-size: 20px;
nav li a {
    text-decoration: none;
    color: #CCCEEE;
nav li a:hover,
nav li a:active,
nav li a:focus {
    text-decoration:underline;
    color:#0F9}
</style>
</head>
<body>

<header>
<h1>SiteName</h1>
<h2>Some Pithy Slogan</h2>
</header>


<nav>
<ul>
<li><a href="#">Menu Item</a></li>
<li><a href="#">Menu Item</a></li>
<li><a href="#">Menu Item</a></li>
<li><a href="#">Menu Item</a></li>
<li><a href="#">Menu Item</a></li>
</ul>
</nav>

</body>
</html>
Nancy O.

Fit Image & Sharpening

In Photoshop CC
Mac OSX
When using the command 'fit Image' in an action, is there some sort of sharpening going on ? Bicubic, BicubicSharper, BicubicSmoother, none...

I do no like your action at all put it in the trash. I don't like the fact that you interpolating a single document 4 times. It also look like you trying to backup in history to before one of the resizes but from what I see it misses and would just backup to before the save. The Action might be hard to Batch perhaps the batch processor could override the save as steps but the names would be the same with a suffix. A3 and A4 have a slightly different aspect ratio. I see nothing in you action to crop to either. The Fit Image steps I see are for a Landscape or Portrait image the has a correct aspect ratio whatever you define as correct. The fit image step make the larger side near A3 300dpi size and near A4 300dpi pixel size. However I see no Image size step setting the DPI to 300dpi with resample not checked. I could send you a plug=in script the you could use to do centered A3 and A4 aspect ratio crop that would handle both orientations. Still there are other problems an action can't handle.
The easiest want to handle this is with a script. A script that you do not need to write just download a use. However because the A3 and A4 sizes have different aspect ratios that are also different the your camera images aspect ratio you may nee to do some cropping or decide on how you want to handle aspect ratio mismatches.
Without any actions you could download the Image Processor Pro and process Landscape or Portrait images in a run. If you want to mix landscapes and Portraits. You would need to download my crafting action package and use my plug-in script Aspect Ratio Selection in a couple of actions to do centered A3 and centered A4 crops of the selection set by the plug-in.
Image Processor Pro type Dialog.
A3
420 x 297 mm
16.5 x 11.7 in aspect ratio 1.414141414141414
A4
297 x 210 mm
11.7 x 8.3 in aspect ratio 1.414285714285714
300x16.5=4950 A3 @ 300dpi
300x11.7=3510
72x16.5=1188 A3 @ 72dpi
72x11.7=842.4
300x11.7=3510 A4 at 300dpi
300x8.3=2490
72X11.7=842.4 A4 @ 72dpi
72x8.3=597.6
Crafting Actions Package UPDATED Aug 14, 2012 Changed AspectRatioSelection Plug-in script added Path support.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions
Example
Download

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

Nurit,
The point is that that button should not be there, if the preference setting is as you say. This indicates the preference setting is stuck, and that is what I was trying to help you resolve.
The full purge is done as follows:
Quit Mail, and in the Finder open Home/Library and locate the Mail folder. Control-click over the Mail folder, and choose Duplicate -- then drag the resulting copy to the Desktop for temporary backup. Next, open Home/Library/Preferences and find the com.apple.mail.plist file and drag it to the desktop.
Relaunch Mail, which will open as though new, and when prompted to import anything DECLINE. Instead, re-enter your account info, and Mail will re-discover the account folders for your accounts, and all should be well, after setting preferences as you desire.
Ask any needed questions, and keep us posted.
Ernie

Help: Windows cannot restore a system image to a computer with different firmware

I want to recover a complete image of a Windows 7 operating system I have backed up to my other server. But I am getting the error "Windows cannot restore a system image to a computer with different firmware. The System Image was created by a computer using BIOS and this computer is using EFI"
The image was definitely taken from this machine - the firmware has not changed!
What do I need to do to restore the image?
Background Story ..
I bought a new HP 255 laptop per-installed with Windows 7 without Operating Systems instal disks (I will NEVER be stupid enough to do that again!).
I took a complete image of the systems, as suggested so that I was well backed up.
However, my machine corrupted its operating systems with a few weeks. The boot recovery CD did not work (would not boot). So in desperation, and because time was short I went out and bought another, legitimate copy of Windows 7 DVD with a license key (So now I have 2, legitimate copies of the operating system!).
I installed the new copy of Windows 7 - but it was dreadful, because many drivers were missing. Mostly the missing drivers were not available on the HP support site for this machine. ALso, boot up was increadibly slow compared to the original OS installation.
So I created a new boot recovery disk from the new version of Windows, and tried to restore using that. New boot disk loads ok, I can find the old image on my network (after loading a few network drivers). But I won't instal the image - giving the above error message.
I tried deleting the EFI partition from the disk (using GPARTED to reformat that partition). That killed the Windows 7 on the machine - but still gives the same error message when I try to re-image the machine.
I have tried going into the BIOS settings .. HP 255 has a "Legacy Mode" - which I have enabled, but this makes no difference at all!
I think that the kind of solutions I am looking for might be:
1. There is a clever way of disabling EFI on my 255 so that it looks like a legacy BIOS machine, or
2. This EFI this is wired into my new boot recovery disk - and there is a way of creating a boot recovery disk that does not use EFI
This has taken me about 2 weeks so far,please help with any suggestions!

DonOxley wrote:
Erico,
I suspect that "MSDOS" is what the Gparted tool calls "MBR" for a partition table, as explained here:
http://superuser.com/questions/700770/mbr-equals-msdos-for-gparted
I think that you are suggesting I give up on trying to recover the image I have stored on my server and just to instal Windows 7 from my new copy. There are two problems with this.
1. After having systematically downloaded all of the drivers from the HP 255 notebook support page, I am still seeing missing drivers listed. Install the AMD graphics softpaq driver first. It also contains the chipset drivers.
2. The machine is taking a hugely long time to boot up, and seems much slower with this version. Maybe that is a product of using "EFI" rather than "bios" - I don't know.
My assumption is that HP had some special set-up option with their version of Windows which makes the machine more performant. It does not seem to be a coincidence that the image they deliver the machine with is not quite compatible with a 'normal' Windows 7 instal.
So my original question stands: How do I recover the image that I saved away (as per instructed) when I first bough the machine?
You still have not said what you used to create the system image. What is the "image" file's extension?
You are mistaken in your comparison. MSDOS is an operating sytem MBR is a partitioning scheme. that is comparing apples to oranges.
The article is making an oblique reference in that using GPARTED is more or less equated to using the diskpart utility at the command line. Everything done at the comand line is essentially done by use of MSDOS commands. GPARTED does the same thing with LINUX commands via a graphical interface so you don't have to type in the commands in a Linux console.
Do you mean making a backup? a backup is not a clone which can be reproduced on different hardware. The SSD disk replacement does make the hardware differ from the original configuration.
Follow the instaructions on the following tutorial to make your disk a GPT type before installing.
http://www.disk-partition.com/articles/mbr-partition-table-to-gpt.html
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Image cache not working with Firefox and apex

Hi,
I'd like to cache all my images to save page rendering time and bandwidth because my images are all static and never change.
I use the John Scott's caching technique Link: [http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/], in a few words this technique consists of adding a header line "Expires: date in the future" in the http response.
It works very well in IE, the images are cached and the same image can be accessed several times (within the same session or in different sessions) without issuing an http request to the server each time.
with Firefox it does not work, the same image is asked again and again to the server (i'm using FF 3.5 and APEX 3.2).
- Is it a date format problem? no, because when i type about:cache in FF, i can find my image in the cache with an expire date in the future.
The weird thing here is that the counter is incremented each time u request the image, so FF knows it is in the cache and even if the expire date is in the future, FF asks it again to the server.
- Is it a FF bug? If u read the http specs or if u google a little, u can come to the conclusion that FF does not follow the standards,
but... images.google.com for example manages to get its images cached with FF.
They use an http response header "cache-control: public, max-age=604800".
I tried the same and all kinds of combinations but without success.
When i compare my image with the one from google in the FF cache, they both have the same attributes.
- It's not an apex issue neither because it works with IE, most probably an incompatibility between apex and FF?
Maybe the use of cookie? or the http request (not the response) containing "cache-control: max-age=0"?
I've found so far 2 half solutions:
1) use ETag and modified date, see the Tyler Muth's note Link: [http://tylermuth.wordpress.com/2008/02/04/image-caching-in-plsql-applications/].
with this technique FF continues to send request each time but the answer is shorter because it's just a "304 not modified" instead of "200 OK" (200 response is bigger as it contains the image).
it's better than nothing but you still have 1 request + 1 response for nothing.
Another problem is that you need SYS access to implement this, which is not possible on an hosted server. (note that for images from the file system it is already foreseen by apex 3.1, Tyler's note is for images from the db)
2) if you preload the image (using myimage=new Image();myimage.src='...';), then there is max 1 request per browser session.
There are 2 minor issues here:
- no caching across sessions
- if u don't want to preload all the images (example a page with lots of thumbnails, when user clicks it show a bigger image, in that case the thumbnails can be preloaded but overkill for the big images), then you need to load the image, wait until the image has loaded before displaying it, it does not slow down the execution, but requires some extra JS.
I'm not asking anyone to investigate it, i can live with the 2 workarounds,
but just in case someone encountered the same problem and already fixed it.
Let me know if u managed to use the John Scott's technique with Firefox. (U can use Firebug to see the http traffic)
Thx
Tim

Hi Anshul, hope these help. Let me know if you need to see anything else.
Best,
Menu Settings:
Tab Hyperlink:
Label Text with with hyper link option not available (works as a hyperlink in chrome and IE though):
Thanks for the help in advance!

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Ligh

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Lightroom software. Also I wan to know what should be the aspect ratio to do so.Thank you in advance

The aspect ratio should be set to 200x280, or equivalently 5x7.
I don't think it is possible to do the cropping automatically in Lightroom, you'd have to do this image by image to crop the faces correctly.

Anyone have a example for useing volitile image in exclusive mode with

i need a example of how to use a volitile image in exclusive mode with active rendering .
anyone know of one or even partial code of how to do it ive been racking my brain trying to figure out how to do it.
or even a example of fullscreen that i can use to draw to the screen in exclusive fullscreen mode.
and im not talking about the sun tutorial no one can even answer my question about it when i asked in the java forum

by the way, here's a commented version of the example I gave earlier in case the puzzle pieces are upside down for you...
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
/* Goes into FullScreen with 640x480 16 bit
* Not all proper checks are made (like getting available DisplayModes),
* But you can always look at the doc for the rest of the checks. Besides,
* What computer doesn't have 640x480...?
public class Example extends Frame implements Runnable, KeyListener {
     VolatileImage v;
     int w,h,x,size; // x and size are for the moving ball
     boolean done; // when this is true, the program exits
     public Example() {
          /* Sets up the frame to be used for fullscreen */
          super(GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDefaultConfiguration());
          GraphicsDevice device = GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
          /* the below 2 methods aren't required
          * but using them results in best performance.*/
          setUndecorated(true);
          setIgnoreRepaint(true);
          /* A few mandatorial checks */
          if (device.isFullScreenSupported()) {
               device.setFullScreenWindow(this);
          if (device.isDisplayChangeSupported()) {
               device.setDisplayMode(new DisplayMode(640,480,16,0));
          /* our frame must be showing before we
          * we create our BufferStrategy or image,
          * in this case a VolatileImage.
          * Showing our frame also switches to
          * fullscreen mode.
          show();
          w = getSize().width;
          h = getSize().height;
          x = 0;
          size = 30;
          v = createVolatileImage(w,h); // creates volatile image (duh)
          done = false; // program exits when true
          addKeyListener(this); // used for exiting
          new Thread(this).start(); // starts the thread
     public void run() {
          while (!done) {
               x += 2; // increase ball location
               if (x >= w-size) x = 0; // back to left if all the way right
               /* You could also use repaint() here,
               * but you won't get a screen update
               * until the system decides it's time.
               * calling paint(getGraphics()) is much faster
               paint(getGraphics());
               /* Pausing of the thread... */
               try {
                    Thread.sleep(1);
               catch (InterruptedException e) {
                    done = true; // exit if there was some error
          System.exit(0); // this won't be called until done is true
     public void paint(Graphics g) {
          /* this attempts to get the graphics
          * from VolatileImage */
          Graphics gfx = v.getGraphics();
          /* If VolatileImage has no image memory,
          * we restore it and get the graphics for it */
          while (v.contentsLost()) {
               if (v.validate(getGraphicsConfiguration()) == VolatileImage.IMAGE_INCOMPATIBLE) {
                    v = createVolatileImage(w,h);
               gfx = v.createGraphics();
          /* this paints the ball etc */
          gfx.setColor(Color.black);
          gfx.fillRect(0,0,w,h);
          gfx.setColor(Color.cyan);
          gfx.fillOval(x,h/2-(size/2),size,size);
          g.drawImage(v,0,0,null); // draw the VolatileImage
     public void update(Graphics g) { // used for no blinking
          paint(g);
     public void keyPressed(KeyEvent e) {
          if (!done) done = true; // program exits on any key press
     public void keyReleased(KeyEvent e) {}
     public void keyTyped(KeyEvent e) {}
     public static void main(String[] args) {
          new Example();
}

Best Poly Fit Coefficients do not agree with Best Poly Fit 2

HEllo,
I have dataset with 9 points and would like to fit or solve linear equation with 9 coeffcient. The model -equation is following
Z= a0+a1*x+a2*y+a3*x^2+a4*x*y*+a5*y^2+a6*x^2*y+a7*x*y^2+a8*x^2*y^2; eq total 9 coefficient.
When I build matrix H and send data to "General Linear Fit" it returns coeffcients and best fit. Best fit works well but I dont know how to interpret a coeficients.
All this mathematics work well when function is polynom of second order, eg when it has coeffcient a0 to a5.
Thanks in advance.
Sasa
Solved!
Go to Solution.
Attachments:
3D Prikaz podataka i interpolacija.vi ‏35 KB

Please also attach the two missing subVIs so we can actually run the VI.
(I don't understand your use of the sequence structure. Seems unecessary. Also I don't understand why you write to the GL as well to a signaling property of the same indicator. Seems redundant and also pointless since you don't even have an event structure. Delete the property node. What was your reasoning for the selected algorithm? Where is the data with 9 points? I only see 6 points in the disconnected array control while the other array controls is empty)
LabVIEW Champion . Do more with less code and in less time .

"Fit Image" CS-5 upresing with "don't enlarge" checked

Similar Messages

Maybe you are looking for