Fit to Fill not working with HD footage in a DV Pal timeline...

I'm editing some HD anamorphic footage (Apple Intermediate Codec, 1440x1080, 29.97fps) into a DV Pal timeline (720x576, 25fps).
When I try to use Fit to Fill to change the speed of the footage and make it fit an exact part of the soundtrack, I either get a still frame after rendering, or completely the wrong part of the clip (ie not the part I selected using In and Out in the Browser), and with no speed change.
The same thing happens if I try using Apple-J to change the speed...
Does anybody have an idea what I'm getting wrong? I'm in FCE HD 3.5.1
Thankyou!

I suspect there's a problem with the frame rate mixing. I'd suggest using Nattress standards conversion software to convert one to whatever frame rate you want to work in. FCE should not be used for standards conversion.

Similar Messages

Auto fill not working with sign-in accounts (in Safari)

Could anyone suggest me how to have the AUTO FILL form work in my Sign-in accounts (in Safari) ?
Could not find anything specifically on this forum, yet.
Thanks for your help.

HI, I seem to be experiencing a simple problem with my safari that has been going on for a while now, and it is starting to get on my nerves. As of late, safari wont auto fill usernames emails. This has never been a problem before, and I haven't altered any preference settings, please help.
Thank u in advance

Premiere CS6 - keyframed scaling is not working with RED footage when Time Remapping is used

Hello,
My system is: Win7, Premiere CS6 (6.0.5), 12GB RAM, etc...
My project settings: I'm using 1080p RED timeline.
Steps:
Using 4K RED footage with "Scale to frame size" disabled after placing the clip on timeline.
Under effects time remapping is set to 50%.
Motion->Scale is keyframed from 50% to 100% to achieve zoom in effect while preserving image quality.
Clip stays at 50% Scale ignoring the keyframes.
Problem is present during preview and in the exported file. I tried with CUDA enabled and disabled and problem persists.
If I turn off Time Remapping, then the clip responds to scaling keyframes.
Is there any workouround or can this bug be fixed?
Thanks!

Thanks.
This seems to work but I had to apply TR to the nested sequence and scaling to the original clip.
Otherwise scaling operations are messed up.
This situation reminds me of after effects and effects processing order.

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

AX will not work with WPA

My AX worked successfully with WPA security for several months, then stopped. I reset it, hard and soft, used factory default, but it would not work with WPA. Changed the security to WEP 128 and it worked fine. But now my Macbook Pro won't connect automatically. I have to run diagnostics to reconnect every time I started the computer.
Went back to WPA, now my Macbook Pro connects fine again, but the AX won't won't connect. Airport utility recognizes it when I reset it, but when I go thru the configuring process with Airport Utility, AX always fails on the last step, saying it could not join the network after it restarted.
Does this make any sense to anyone?

Henry,
Thank you for explaining Duane's approach. Immensely helpful! And, of course, in retrospect, makes complete sense. I'm sure there is a kb article on this somewhere....... ?
Which brings me to something in your post:
"do a hard reset of the Airport Express and use the Airport Setup Assistant to reconfigure it from scratch"
Am I missing something here because after installing Leopard, Airport Utility is the only Airport app I have in my Utilities Folder? I do remember Airport Setup Assistant being part of Tiger (but that disappeared as did the functionality of several other Airport apps (Airport Admin, etc.) after upgrading to Leopard.
So, IS there an equivalent in Leopard of the Airport Setup Assistant? Or do I use the Network app in Sys Prefs to Join an already existing network (going the route of a hard reset of AX)?
Usually, David Pogue's MM book on OS X is helpful in filling in the gaps, but his new Leopard book seems a bit sketchy this time on setting up a wireless network. I think this subject (setting up a wireless network, etc.) could almost get a MM of it's own!
If I may, can I address a related issue? Previously, in setting up the AEBS and AX to work together you do end up with what LOOKS like TWO networks (both have their own Apple network numbers and letters) even though they are working in tandem as 1 network, right?
I bought the AX to extend the range of my network because it seemed the signal from the AEBS was not quite strong enough. I set it up to be a "remote" to the AEBS's "main." I also use the AX to stream iTunes to my living room's sound system.
Again, many thanks for your help.
Message was edited by: WildBill

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

HT3529 i messge not work with my number

My I Messges not working with my number

Maybe it's because your number is not yet registered with the iCloud/iTunes account.
(Setting > Messages > Receive At) check if that area is filled with your number, then everything on the go.
Thanks.

New Applications model DOES NOT work with StandAlone OSD media

If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1

It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Fit to Fill not working with HD footage in a DV Pal timeline...

Similar Messages

Maybe you are looking for