Fiter on different Entry Attributes but with a "AND"

Hello,
As we know, we can use the filter on the folders.
I would like to make a filter including two different entry attributes on a same form.
I can add the entry attributes without any problem.
Now, it seems the filter uses a "OR" between the entry attributes but I would like to have a result based on a "AND" ....
I did not yet find a way to specify the "AND" ...
Any advice will be welcome ...
Tx for your help ...
Stephan

Spauwels,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

If another person or company serviced your iPad, your warranty has been voided. Apple will do an out-of-warranty exchange. Have you contacted the original service provider, and complained?

My text messages go to everyone except to my daughters. she has an iphone but with bell and mine is with rogers. she receives them when she is at home or say at chapters/tim hortons where they have wifi, but if she is walking somewhere or at somewhere wi

my text messages go to everyone except to my daughters. she has an iphone but with bell and mine is with rogers. she receives them when she is at home or say at chapters/tim hortons where they have wifi, but if she is walking somewhere or at somewhere without wifi, it isn't working? i don't understand. she has a text plan. her phone is an iphone 4s can anybody assist me if you know what the problem may be? thanks so much.

Have her go to Settings>Cellular and make sure Cellular Data is turned to On. If she's having trouble with regular sms messages, check her carrier to be sure her messaging plan is properly provisioned.

I'd like to know what is different between iPad air with wifi, and with cellular

I'd like to know what the different between iPad air with wifi and with cellular

With the wifi only one you can only get internet via wifi.
With the cellular one you can also access the internet via cellular (with appropriate data plan)
beyond that, and the price, they're the same

USING TEMPLATE IN A DIFFERENT DATA SOURCE BUT WITH THE SAME GL QUBE

Hi, I want to chance connection in a SV Workbook to another data source. As we are having several test instances I need to be able to use the same Query workbook on different instances.
I've not been able to reproduce the steps to get the SV to ask for the new instance/source.
Below is what I did before but can't get to work again. Please advice
1. Open Excel and Open the SV Template you want to use that containing a different Shared URL (You can check this with (T) Smat View > Sheet Info. Login as User/PW: Casey.Brown/<weekly PW>
2. Make sure SV Options Shared Connection URL is set to point to the new instance SV > Options > Advanced > Shared Connections URL, for example 'https://fapXXXX-bi.oracleads.com/workspace/SmartViewProviders' (B) OK
3. Open Smart View Panel Navigator > Open > Smart View Panel
4. Select a 'Recently Used' connection in the Panel that points to the new instance. If you don't have it create one by connecting to your new instance and then Disconnect All.
5. In the Login to Fusion Applications window login as User/PW: Casey.Brown/<weekly PW>
(B) Sign In
NOTE: You have to click on button Sign In. You cannot press enter on keyboard as this makes the login window to pop up again. This is a known issue.
6. In the Connect to Data Source pop up window login as User/PW: Casey.Brown/<weekly PW>
(B) Connect
A pop up window 'Smart View' will pop up: 'The worksheet contains data from prior operation. What do you want to do with the contents of the sheet?
-> Clear sheet contents and POV
-> Reuse sheet contents only (Free operation will take place, existiong POV will be lost.)
-> Reuse sheet contents and POV (New ad hoc connection/Smart Slice must be consistent wit existing contents.)
7. Select 'Reuse sheet contents and POV
Depending on seeded data member changes you may receive 'Input Grid contains unknown Memebers' pop up window.
(B) OK
If you get above you need to correct unvalid members.
For example removing Budget-Budget and replace it with Budget- for the Scenario dimension. Then you will be able to use the sheet with the new data source.
Please advice on what step is needed to get the system to provide the pop up window 'Smart View': 'The worksheet contains data from prior operation. What do you want to do with the contents of the sheet?
Thanks,
Max.

You can only sync with one iTunes library. However, you can manage music and videos among different computer/iTunes libraries. See:
Using iPhone, iPad, or iPod with multiple computers
If you want to change syncing computers see:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
If all the media is in the iTunes library of the second computer then you can omit the transferring media steps.

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

Resizable page for different screen sizes but with static image content. Shall I use media query?

I’m making a page that has of mostly image content. It’s a large circle in the middle so I want it to be centered vertically and horizontally. I also want it to stay centered and resized proportionally for different screen sizes. I’ve read about media query but it seems to me that the elements just become fluid. Can I make the elements stay in place using the media query?
I’m working in Dreamweaver CS5.5

Here's the code I'm working with now, I've taken away the things that I don't really understand.
It's working but I guess it won't hold when I start with the media queries.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head><style type="text/css">
body {}
div {
   font: 12px Arial;
span.bold { font-weight: bold; }
#the-circle {
height: 960px;
width:960px;
margin-left:650px;
margin: 0px 10px 0px 10px;
margin-left:650px;
.link-row {
position:absolute;
width: 960px;
height: 74px;
top: 130px;
left:660px;
.link-row-2 {
   position: absolute;
   width: 960px;
   height: 74px;
   top: 300px;
   left:660px;
.link-row-left {
float: left;
.link-row-right {
float: right;
.link-row-right {
float: right;
.link-row-right {
float: right;
</style></head>
<body>
<br /><br />
<div id="the-circle">
<img src="ACE Test/Logo-DW.png" width="960" height="960" />
</div>
<div class="link-row">
<div class="link-row-left"><img src="ACE Fotografier EP och Video/Logo/Wix ACE Logo.png" width="111" height="74" /></div>
</div>
<div class="link-row-2">
<div class="link-row-right"><img src="ACE Fotografier EP och Video/Logo/Wix ACE Logo.png" width="111" height="74" /></div>
</div>
</body></html>

How do I print a booklet with a colour cover but with black and white inside pages?

Hi there,
I need to print a large amount of booklets, which have a colour cover but are grayscale on the inside. However, I am having trouble setting up my document to successfully do this and I am unsure if it is something I can change in InDesign or if it is something I should figure out with my printer driver?
We used Page Plus for these booklets in the past and were able to do this with the same printer, so that makes me think there might be setting I could change in InDesign to achieve the same result.
It integral that the printer knows that the inside pages of the booklet are black and white, as we get charged per copy for colour printing and it is vastly increasing our printing costs.
My coworker believed that exporting the file as a PDF with the options: Colour Conversions (convert to destination - Pressure Numbers), Destination (sRGB IEC61966-2.1), and Profile Inclusion Policy (Don't Include Profiles) is making a difference. However, I don't believe is is the case.
If anyone had another suggestion that I could try, that'd be great!!

@Eugene – do you have details for "Export as Grayscale"?
I tried with the following details:
Target-Profile: Dot Gain 15%
Convert to Target Profile
Include Target Profile
If I do it this way I get:
Target Profile not included
Wrong numbers for my colors
(I tested with a self-made color wedge on the page for the percentages of Black shown below)
Seen in Acrobat Pro 10 with proof simulation "Dot Gain 15%":
100 % Black => 100 %
80 % Black => 82 %
60 % Black => 63 %
40 % Black => 43 %
20 % Black => 22 %
I could convert to "Dot Gain 15%" in Acrobat Pro's Preflight Panel, but this would show the same wrong percentages (just tested).
What I can do, however, is printing to PostScript with color separations, only color channel Black.
That would work, if I chose a Distiller setting, that will not change the color, to convert my separated PostScript file to PDF.
Seen in Acrobat Pro 10* with proof simulation "Dot Gain 15%" or any of the other available gray scale profiles.
(Acrobat Pro 11 might get this wrong due to a bug)
100 % Black => 100 %
80 % Black => 80 %
60 % Black => 60 %
40 % Black => 40 %
20 % Black => 20 %
This separated PDF (channel Black only) can now be converted with a self-made correction* in Acrobat Pro's Preflight Panel to a gray scale PDF/X-1a.
If done right * the color values stay as defined in inDesign.
Output in my case:
PDF/X-1a
OI: GrayScale profile Black ink of ISO Coated v2 300%
Tested with:
InDesign CC 2014.2
Distiller X
Acrobat Pro X
Mac OSX 10.7.5
Uwe
* There are several, convoluted steps necessary to get this (hope, I can remember them all):
Not optional:
Have a grayscale profile representing the channel Black of your intended output CMYK or generate one!
In my case the base CMYK profile was: ISO Coated v2 300%.
And I got a "Black Ink of ISO Coated v2 300%" profile for Grayscale conversions by generating this with my PhotoShop app.
Maybe optional, but helpful:
Change the color settings of Acrobat Pro X to use the color settings file you generated in PhotoShop where:
Grayscale is defined as the black channel of ISO Coated v2 300%: "Black Ink of ISO Coated v2 300%"
Mandatory, but somehow tricky:
Then on to the Preflight Panel of Acrobat Pro to generate a custom preflight profile.
None of the ordinary ones will fit exactly (at least in my Acrobat Pro X).
1. Make a duplicate of an already stored Preflight profile that converts color to Gray. Name it appropriately.
2. Include a single correction for converting to Gray Scale (at this time, or if you do something like that the first time, it's not possible to change or duplicate that single correction)
3. Save your new profile. Close the profile.
4. Open the profile again.
5. Now, suddenly it's possible to duplicate that single correction (converting to Gray Scale).
Do some changes, appropriate correction options, eg. adding "Black Ink of ISO Coated v2 300%" as OI to the PDFs you will convert.
4. Use that duplicate single correction in your new Preflight profile.
5. Save your custom preflight profile.

Using 2 different icloud accounts, but share match and photos from one account

My wife and I have an our own Macs and iPhones. I would like to have the photo stream and match from one account shared on both but use backup, contacts, calendar, ect. seperately
The way I currently have it setup it somewhat works except we both backup to the same account and the Maps program uses my account (which is where the backup and photo stream comes from)
Does anyone have a suggestion?

You can create a shared primary account and each add individual secondary iCloud accounts to your devices to sync mail, contacts, calendars, reminders and notes. However, only the primary account can be used for iCloud Bookmarks, Photo Stream, Documents and Data, iCloud Backup and Find My iDevice. Also, mail in the secondary account is fetch rather than push. Perhaps that's your current setup. If you want to share the same photo stream, that's how you'll have to set things up.
An alternative of course would be to maintain separate iCloud accounts and manually add photos to a shared stream on your devices and invite each other as subscribers.

I installed webroot and now firefox is loading pages different like a tree with names and no graphics

Yahoo!
Yahoo! Search
Web
Images
Video
Local
Shopping
More
Search:
Open Search Assist
Explore Y! San Jose
My Yahoo!
Make Y! your homepage
Take a Survey Today
Debbie
Hi,
Debbie
Profile
Updates
Account Info
You are signed in as:
debbie_fish@sbc…

Do you mean running Firefox in full screen mode?
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then you can hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
*https://support.mozilla.org/kb/how-to-use-full-screen
You can also run Firefox in a maximized window to have easier access to the Menu bar and Navigation Toolbar.

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Syncing MacBook iCal with iPad2 and iPhone4

Without Mobile Me, and while awaiting the iCloud, can iCal entries be synced with iPad2 and iPhone4 and vice versa?

Thanks for your reply. Problem solved :-). I had to tick the box that said 'automatically sync new apps' and hey presto. Thanks again for your reply. According to the guy in the Apple store on Regent St in London I would have had to create a new account and use an account for each device. Didn't think that was the answer but I thought they knew best. Obviously not.......
Regards

FI Customer Account Statement with Debit and Credit Columns

Hi SAP Expert,
We are using form (developed from T-code: SE71) to send customer account statment for only open items this is working fine.
Now My wants customer account statement for all transactions but with debit and credit in a separate columns. is there any way we fulfill these kind of request?
if any particular logic then let me know please.
thanks in advance
b/r
prashant rane

Dear Vivek,
You logic is helpful can I apply this in SE71 form development?
Below is my customer layout format
Document # | Document Date | Reference | Debit Amt | Credit Amt |
In bottom toal Debit / credit balance figure
can I use any code/login is SE71 form or I will need to create any development report which involves user exit?
I am looking for SE71 optios first
thanks in advance
Prashant Rane

Mouse Right-Click menu with JTextField and swing

Hello,
I created a small app for providing an organized gui to insert data and log it to a text file. I just recently converted it to swing to improve the functionality of it and try to get away from some of the bugs I found in using regular java.awt.
So far so good, all of my complaints with regular awt are gone using swing, but I have one problem I see as a real pain.
With a TextField in java.awt you can right click and get the standard mouse-menu. The mouse menu is nice for cut/copy/paste type operations and I do not want to lose this functionality.
But with swing and JTextField I am not getting the menu. I right click in there and get nothing. My UIManager is loading the OS one (windows) and I cannot find a way to recover this feature.
Does anyone know how I can get this working?
Thanks,
Lucas

Well as I posted here to try and see if there was a way to recover what the OS already provides I have struggled through creating a popup menu.
I have the cut, copy, paste and selectall complete but I am struggling with the undo option.

Bookmarks with iCloud and Safari 5.1.7 version Windows

Hi,
I use iCloud to shared bookmarks with Safari between my Mac and my iPhone, but in the work I use Windows 7 and I need to view my bookmarks with Safari.
I downloaded the control panel iCloud for Windows but the application cannot support to shared bookmarks with Safari 5.7.1. but with IE and Firefox y I had not any problem.
Is possible to use iCloud bookmarks with Safari 5.1.7 in Windows?.
Thanks in advance.

Not to Me Too it, but I can't believe we're the only ones who are having this issue.
I have iCloud bookmarks and hte reading list working on all my Mac and iOS devices, but at work, the bookmarks are outdated and the reading list is totall off. Beleive it's only the items I've added from my work PC.
What's more, the iCloud control panel only allows you to setup the sync with IE, FireFox or Chrome. Seems a huge omission that Apple would not support their own browser.

Fiter on different Entry Attributes but with a "AND"

Similar Messages

Maybe you are looking for