Fitted Case for Motorola Droid 3 with a Wireless Inductive Backing?

Hello!  I'm not sure if this question's been asked, but I just bought the wireless inductive cover for my Motorola Droid to charge wirelessly and find that the cover is ever-so-slightly thicker than the normal backing.  This obviously makes my silicone cover fit incorrectly and I was wondering if anyone knew if there are fitted covers for Motorola Droid 3 with the inductive cover?  If so, please direct me to the correct page, and I will purchase one immediately!  Thank you!

Hi NiteTide,
I have checked out some references for the wireless inductive cover for charging. It is true that this does make the phone a little thicker, so the silicone cases made for the device may not fit as well. This is also true for extended batteries and their covers. 
If using an extended battery or a wireless inductive cover, I would recommend a holster or a pouch as a case for the phone. They will fit much better and it will take just as much time to remove it from the case as it would to remove it from the pouch. In addition, the pouch or holster provides the phone with more protection than the silicone case. 
To view all of our accessories, please click on the following link:
http://www.vzw.com/accessories
Thank you, 

Similar Messages

  • Has anyone noticed that the Otterbox Defender case for the Droid Maxx is not manufactured correctly?

    After ordering 2 cases from Otterbox directly, and having to send both of them back, I called a Verizon store and had them compare the Otterbox Defender case for the Droid Maxx to the actual phone.  They were surprised to note that the hole for the camera on the case (to the left of the speaker) was on the opposite side of the camera on the phone (to the right of the speaker).  And, there is no hole for the camera's sensor on the Otterbox case.

    Then return it to an Apple Store and complain and if neccessary get your money back

  • Can anone recommed a solid case for the Touch 4g with belt clip

    Can anone recommed a solid case for the Touch 4g with belt clip

    I was going to suggest something from Otterbox. Unfortunately, they've chosen to discontinue iPod accessories. Still you may be able to find something on eBay. I don't know if the iPhone case can work. It'll likely be too big.

  • Unlock code for Motorola Droid 3

    Hello. I want to unlock my Motorola Droid 3 and use it with any sim cards. Where I can get the unlock code for free?

    Hello
    I apologize if my English is not good, but I try to explain my problem
    A few days ago I Bought a Motorola Druid 3 on Ebay.
    My Seller Said the phone is not lock in Verizon
    I received a phone but it asks for unlock code.
    I know it's wrong that I bought on Ebay, but in Europe you can not found this one.
    And  I want this item
    in this case how to get unlock code?

  • Changing font size for motorola droid's emails

    Hi, is there a way of changing the font size with the motorola droid, when working with emails? The emails font seem a bit small. a Little hard to read. I'd like the font to be larger.
    Thanks.

    I tried Spare Parts, because I have the same problem with the font size on email - way too small for these 50-year old eyes.  It does not work on email.  In fact it says in the Spare Parts menu under Font size "this only works within this screen."  I'm using an LG Ally, BTW.
    Any other ideas for increasing font size for emails? 

  • Is KitKat 4.4 now available for Motorola Droid Ultra?

    I have heard and read that KitKat 4.4 is now available for the Droid Ultra for Verizon customers. I've also read that Motorola is including device updates in the upgrade. Included would be camera upgrades so I am anxious to get started. How might I access and download the update?

    It's my understanding that the update has been pulled due to issues.
    Re: kit kat update ?

  • SPANNING SYNC USED FOR MOTOROLA DROID, GOOGLE MAIL & ICAL NOT SYNCING

    I USE SPANNING SYNC ON MY MOTOROLA DROID. WORKS GREAT IN SYNCING TO GOOGLE MAIL BUT ONLY GETS ALERTS FROM ICAL. CAN'T SEEM TO SYNC GOOGLE TO ICAL AND BACK. IS IT THE 'READ ONLY' ON ICAL THAT IS THE PROBLEM. IF SO, HOW DO I CHANGE IT. THANKS!

    Hi, I'm not sure about SpanningSync, I think you should better contact their support and they will assit.
    Did you tested Syncmate? This tool syncs your mac with android too - ical sync is free, so you can check them out http://mac.eltima.com/syncmacandroid.html

  • UNLOCK CODE FOR MOTOROLA DROID XT912

    Hi, i recentley bought a Motorola Droid XT912 from ebay hoping to unlock it, and it is for Verizon Wireless. I searched online for hours and hours, and most of the places said just get the unlock code from Verizon Wireless, they give it to you for free, so I am wondering if you could please give me the unlock code so I can start using it as fast as possible, I will give you all the information for the phone Please and ThankYou.
    __ Androidlover16

    If you are not a current Verizon Wireless customer and also don't meet the other qualifications, you cannot get the unlock code for the SIM unlock on a VZW branded device.

  • If i want to replace the back case for an iphone 3g and i provide the back case, will Apple do the actual replacement for me?

    The black back case on my iphone 3g is cracked. i would like to replace the back case with a new white one. I saw the video on how to do the replacement on youtube and found it complicated. if i take the new back case and the phone to Apple, will the replace the broken back case for me?

    Regarding the iPhone 3G, the only repair that Apple Genius does on that device is the Front Screen Replacement. So they could help you get the front assembly back on when you are done with the repair. To give you a better idea, the Genius do not even replace the battery on the iPhone 3G. Apple will not help you with this repair.

  • Case for iphone 6 plus with lightning to 30 pin adapter?

    I recently upgraded to a iPhone 6 plus from an iPhone 5.  I have been using the square lightning to 30 pin adapter to adapt the 30 pin plugs on both my bedside clock radio/dock for overnight charging and in the glovebox connector in my 2013 VW Jetta.  I had no issues connecting the plug with an Otterbox Defender on my iPhone 5.  However, there are very few cases on the market right now for the iPhone 6 plus, and the Otterbox was not readily available when I purchased the phone 2 weeks ago, and I'm also not so sure I want to fork over the $60 since Apple isn't recommending the Otterboxes anyways.  I'm not sure I buy into the Lifeproof concept, although I know some people love them.  The Tech21 cases also have to be ordered, and don't have integrated screen protection like the Otterbox Defender.  Admittedly, as careful as I try to be with my phone, I am a dropper and need a protective case.  I ordered a cheaper Caseology case, but it does not allow the lightning to 30 pin adapter plug to attach, so I cannot charge my phone on my bedside dock or in my car with the adapter.  I looked at the Spigen cases online as well as several others, but none of them seem, from visual inspection of the online photos, to have the large opening that the Otterbox for my iPhone 5 did that allowed the adapter to be connected.
    Yes, I could buy extra lightning cables and reinvent my whole charging system, but I have found the cables to be not nearly as durable as the adapters (I've gone through many cables in the last two plus years, but still have the same two adapters.)  I would rather find a case that accommodates the adapter.  Any suggestions for cases that will allow the adapter to be attached with the case still on? 

    Have a look at cableJive they make the dockStubz which might do what you are looking for

  • Case for the Nokia 1020 with charging cover

    Where or when can I find a cover that fits the Nokia 1020 with the charging cover?

    The charging cover is a case as such. Nokia will not be releasing a case that fits over it. I doubt any 3rd party companies will release anything now either.
    I suggest you use a pouch style case that you can find on ebay if you want to cover the charging shell.

  • What is an ideal case for the iPad mini with Retina?

    Hi all,
    Yesterday I broke down and finally decided to buy one of the iPad Minis' with Retina on the refurbished site.  It was a good deal!
    I have an iPad mini 1st generation that I will be selling to my brother, so it's an even better deal!
    Anyway, on my 1st generation  I am using an Otterbox Defender case which I like, however it does add some bulk to it and also the screen gets very oily and riddled with fingerprints from all the touching (even with cleaning).
    I am wondering if there is another case that offers as much protection as the otter box (and has the screen protector layer) but that's a little leaner and the screen doesn't track fingerprints as much ( although it is inevitable)?
    I appreciate all your input!
    Thanks

    Hey ARios006,
    The best advice I can give would be to keep an eye on BestBuy.com and our weekly advertisements. New products and shipping options are added on a daily basis, so make sure to check back often.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • What is the Best case for iPad 2 and something to protect the back

    Hi there I am wanting to protect my dear iPad 2 lol. So I would like some advice on the best cases please,I would to protect the back of it too,I see the smart case is ok but no cover for the back,there are loads on eBay but are they just cheap plastic, any names and place to buy is a great help thank you

    Hello tori77,
    the Best will be what suits your needs.
    I use OtterBox Defender Series for my iDevices.
    http://www.otterbox.com/iPad-2-Defender-Series-Case/APL2-IPAD2-D9-E4OTR_A,defaul t,pd.html
    IMHO you should also have a good screen protector.
    Here is a choice:
    http://store.moshimonde.com/ivisorag-for-ipad2-black.html?gclid=CPvLnf2J2qoCFYXt 7QodbGtD6Q
    No bubbles, removable, washable, reusable.
    The above are also carried by BestBuy.
    Happy Computing,
    A

  • Protective Case For a 5800XM With Extended Battery...

    Hi folks
    Simple question - I hope!
    The extended battery that you can get for the 5800 sounds excellent.  BUT - is there a protective case that can accommodate the extra bulk of the battery and its new, wider, rear cover?
    I currently have a Proporta leather case which is excellent.  But the supplier of the extended battery (Mobile Fun) tells me that my 5800 will no longer fit in this case with the larger battery fitted.
    Does anyone know of a similar protective case that will do the job with the larger battery?
    Thanks in advance.
    Very best wishes
    Simon

    nstokes12 wrote:
    I to bought the extended battery from a vz store and got the standaed droid holster, pretty tight fit at first but as you use it it does loosen a little bit.  Be assured it will not fall out of the holster.  Problem withthe holster is if you then go and buy the windshield holder so you can use the droid like any other gps it WII NOT fit as the power connector will not line up.  You actually  have to take off the holster and slide in the adapter  but who wants to be chagning things all the time.  I am hopeing motorola will figure out they have a fitment issue and comes out with the correct holster and windhield mount for a droid x with their extended battery installed.  Who ever thought a sill mm meant so much???
    You gotta be really careful though.  My friend has a leather bound case identical to mine.  They got it to fit over the extended battery, but the fit was so tight it broke off a holding tab on the case when they tried to remove the case.

  • Hard/soft case for the 2nd gen nano?

    I'd really like to buy an 8GB 2nd generation Nano, but am having to delay as i can't find a single case for it (ideally one with a belt clip). I don't want to order a case designed for a 1st gen Nano as i'm not sure it would fit due to the slight size difference between 1st gen and 2nd gen Nanos.
    Are there any cases currently available that are designed to fit 2nd gen Nanos? If not, does anyone know when some might become available?
    Thanks for the help!
    iPod nano aluminium   Windows XP  

    Welcome to Apple Discussions!
    In the coming weeks, more and more cases will be released for the 2G iPod nano. You can always go to the online Apple Store too and see what they have available at the moment (tell the store to show you cases compatible with 2G nanos).
    btabz

Maybe you are looking for

  • Print boxes in Color

    Hi, I have a form designed in SAPScript which has got several boxes.  I want these boxes to be printed in color as output. Can anyone through light on how to achieve this. Regards. Praveen

  • UIX related JDev question.

    Hello, I am currently using the printable facet in some of my applications. I was wondering if their was way to create a facet that would ressemble the printable facet, but with all the chrome and some functionnalities. Basically I would like to crea

  • Nokia E7.00 Symbian Belle release date?

    I was wondering then will Symbian Belle™ be available for dowloading in to Nokia E 7.00? I have been seeing posts on Nokia official site like: "Belle available for new phones N8, E7..etc" but when I connect it tu Nokia Suite it says " software is up

  • GSoD Every Time OS X is Switched to From Vista

    I am not sure what is causing this as it's not my computer and I don't have a lot of time to play with it, but I know the HDD is fine as I can fix it every time by booting from CD and repairing permissions with disk utility, but as you can imagine th

  • Vrml -- pdf axis messed up

    For some reason Adobe Acrobat 9 Pro Extended changed axis in the view (small colored axis in low left corner): -Y (wrl) -> Z (pdf) Z (wrl) -> Y (pdf) As a result the front view in Acrobat correspond to bottom view in Cortona. Don't see any control ov