Fitting more than 80 cols on portrait

I have a problem on my hands that I have been unable to resolve.
The report is 65x80 and prints in Portrait. But 80 columns is not enough to display all the data I want, I need atleast 90 columns but then printing makes it landscape and I need to keep it in portrait.
I looked at config in anything more than 80 columns is set to print in landscape. I spoke to Basis and they said it is too much work for them to create a format style. Can anyone think of ways to include more than 8- columns in the page and still print portrait.
Will converting this classical report to an ALV fix it?
Edited by: Megan Flores on Jun 4, 2009 4:26 PM

Hello Meagan,
My first reaction would be to go back to your Basis group and ask them to create a Format Type.
This should only take 5 minutes.
Then you will have to get them to add the Format Type to all of the Device types used in your company.
This may take a little longer, I do not know how many device type you use.
You will still run into the same problem if you convert your report to an ALV type report.
You are on the right track.
Hope this helps a bit.
Greg Kern

Similar Messages

4gb nano. cannot fit more than 3.8gb to it

HELP. I cannot sync more than about 3.5gb to my 4gb ipod nano, there is a warning screen that comes up when I try to add more...
what can i do?

3,5 or 3,8 gb? Your thread title says 3,8...
On apple.com you'll find the following hint:
1GB = 1 billion bytes; actual formatted capacity less. Song capacity is based on 4 minutes per song and 128-Kbps AAC encoding; photo capacity is based on iPod nano-viewable photos transferred from iTunes.
3,8 gb are fine but if the nano doesn't store more than 3,5 there could actually be something wrong with it.

How can I add more than one song to fit the length of the slideshow

I would like to add more than one song to my slideshow. I do not want to repeat the same song more than once. Is there a way to add more than one song to a slideshow?

Great - unfortunately it is not intutative - but simple - once you know the secret - and at least in iphoto '08 it acts like you can select multiple songs using the command key but it only plays the first one
LN

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

Is there a way to authorize more than 5 computers. We have three macs and 5 pc's in the house.

Hello, I have a MBP (mid 12 model), a brand new MBA (mid 13), and Mac Mini, four laptop PCs and 2 more Desktop PCs (I have teenage daughters and my wife)...
I intend for one of the PC's to be a "server" I have a large library that certainly does not fit on the MBA, or the MBP. To share the library the client has to be authorized.
I am currently using all of my authorizations... is there a way to get more? (I can't move content to another account I am assuming...)
Thanks in Advance,
Chris

iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
"You can authorize up to five computers with your Apple ID." I have not heard of a way to get more. They probably set up a limit so people don't go around and authorize all their friends' and relatives' computers to one account, and somehow arrived at the number 5 to limit (probably because most families won't have more than one computer per person and 2 parents + 2.5 children rounds up to 5).

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

CLOB Datatype (Assgin more than 32k fails)

Dear All
Can anyone tell me why i am getting this error if i assign more than 32k character to clob variable in pl/sql
but i can assign it from table to a variable
Pl/sql 1(ORA-06502: PL/SQL: numeric or value error: character string buffer too small)
declare
c clob;
v varchar(32767);
begin
for i in 1..90000 (just assuming it as 90k)
loop
v:=v||'x';
if length(v) > 31000 then
c:=c||v; -- here iam getting error while assigning character to clob if it is more than 32k
v:=null;
end if;
end loop;
c:=v;
end;
Pl/sql 2 (works fine when assgin from table)
declare
c clob;
begin
select clob_data into c from x; -- clob data is more than 32k;
end;
But it works fine with database 9i rel2 but in 11g i am facing this problem.
Regards

hey U r getting the error because of v varchar(32767) , but clob data type can take large amont of data atleast 1000000 this much data can be stored in clob data type try it with this. or else see below
Hi see the example below
create table temp(col clob);
declare
v_string clob;
begin
for i in 1..1000000
v_string:=v_string||'A';
end loop;
insert into temp values(v_string);
end;
now
select length(col) from temp; you will get output as
length(col)
1000000
this means that clob datatype can store minimum of 1000000 character.

I gave my macbook pro 13' to this guy to fix it and he is taking more than 3 weeks to repair it, I just wanna know if its appropriate to take so long to fix the problem that he claims

So I sent my macbook pro to a nearby macbook repair person because it was too slow, everytime I click on something, the rainbow wheel will appear and it will take like a few minutes to open up a window. Also, my videos were stucked whenever I played them in VLC etc but when I use my external hard disk to play the video, it will be okay. So I sent to this guy explaining all the problems I am facing with my macbook, then he claimed that he could do it within a day as its probably just the hard disk problem or if its the processor(2days). And now its been 3 weeks and he is still fixing my macbook, he told me it was the bios and he needs sometime to do it as he needs to be very careful. I dont know if I should believe him, its been more than 3 weeks now? I just wanted to know if what he is saying is logic and if it is, does it really take so long to fix the bios?
p/s I've increased the RAM to 8gb 1600Mhz Ddr3 recently thinking that was the problem but obviously it didnt fix my problem Help me out
Thank youuu.

Mac's do not have a BIOS to flash. Get your Mac back before this situation gets worse. Then take it to an Apple Store. You will have to pay.
FYI
"p/s I've increased the RAM to 8gb 1600Mhz Ddr3 recently"
You fitted the wrong Ram, you will need to change it for the right Ram when you get it back.

More than one iPhone, his and hers, how to share music?

Hey folks
We've had this issue since we've had iPods and its finally bubbled to the surface enough that I cannot take it anymore.
I have a desktop mac with a 250gb music library - I buy all the music in the house and it lives on my machine. I have an iPod touch (soon to get an iPhone) that syncs to the library, including my contacts, calendar, aperture photos, etc
My wife has her own macbook and her own iPhone. Our music library is too large to fit on her MB's hard drive (even if we get a 300GB drive for it, that does not seem like a practical solution).
I thought you could sync different things (music, video, podcasts) to different computers ... but apparently that was incorrect.
So my question is - what do you do when more than one person in the house has an iPod/iPhone? Having her iPhone sync to my library trashes her contacts, applications, photos, etc ... if I disable those things on my library and enable them on hers, it trashes the music.
I know we can "manually manage" the music - but that is also less than desirable. My only other thought is to set her up as a user on my desktop, create a sym link to my iTunes folder and rsync the library file to her ~/Music and use mobile me to sync contacts b/t her macbook and the new account ... surely that is not how apple would have us do it, is it?
Anyone have any suggestions?

I thought you could sync different things (music, video, podcasts) to different computers ... but apparently that was incorrect.
You can sync iTunes content with a single computer only.
You can sync iTunes content (music, video, and apps) only with one computer, and sync everything else such as contact info, calendar events, bookmarks with a different computer along with transferring photos to the iPhone with a different computer - or sync iTunes content and transfer photos from one computer, and sync contact info, calendar events, and bookmarks only with a different computer. An iPhone can have different sync preferences with iTunes on different computers.
Best to disable automatic syncing for each iPhone when connected, which can be done with the iPhone sync preferences for each, or globally for when any iPod or iPhone is connected via iTunes preferences on each computer.

Can I use more than one database connections in a jdeveloper project?

I use jdeveloper version 9.0.4.0 (build 1407),Can I use more than one database connections in one jdeveloper project?

9.0.4 is a fairly old version, so you may only find a few people who know how it worked.
Assuming you're using ADF BC, once known as BC4J, once know as JBO, in the project, and that the architecture hasn't changed much, then the answer is only 1 connection per project.
Programmatically you're free to use as many connections via JEE as you see fit, but ADF BC is limited to one connection.
CM.

Can you print more than one photo on a sngle page in iPhoto, as you can in Picasa?

iPhoto printing--
Can you print more than one photo on a single page in iPhoto, as you can in Picasa? Terrible waste of paper and time to do it one at a time! I 've been away from Macs for several years ( I know, shame on me) but I thought I remembered more printing flexibility. Help, anyone?

Yes - select the photos and print - select the print size and paper size (be sure they will fit with some small borders) and click customize - in settings select multiple photos per page (the preview will reflect this selection) and print
LN

How to have more than one playlist on the iPOD mini ...?

This may seem a silly question - after all, isn't it the whole point of the iPOD ? Anyway, with my current setup, I cannot get more than one playlist onto my ipod mini.
Using Win2000Pro, connecting using USB; there have been lots of other issues involving ' cannot read/write to ipod ' which have been reported on these forums , I started having problems after Apple 'upgraded' iTunes from 4.9 ...ended up with nothing on the ipod at all. Since then a few upgrades and now running iTunes 6.0 (not 6.0.1), it DOES sync with the ipod but does not let me manage the playlists:
Since my library is > the ipod ( 4 GB model) I cannot use the option ' sync all songs & playlists' , which is what I originally used when the library was < the ipod. At that point I did get ( automatically I think..) a few playlists onto the ipod.
Howeever, since the library got too big, I have to select 'sync to these playlists only' . I use 1 master list, which works, ( it syncs all the songs to the ipod and I get just that playlist on the 'pod) but any attempt to select another playlist from that dialogue box results in consistent hanging of iTunes, and you have to kikll it in task manager.
I would have thought that you could simply drag n drop a playlist onto the connected ipod icon (that would be more elegant) but the inteface doesn't allow it..
Oh and another thing ..why does the syncing tool delete ones on the go playlists from the pod ? I can't even get around this issue by making them manually on the 'pod as they get deleted when syncing.. Grrrrhhh
Where to go from here guys & gals ??
Thanks...any tips gratefully received
Aries/ AMD Windows 2000 Draytek Wireless DSL 2 Mb

Ok I'll try that, although I did try it earlier when I had iTunes 5.xx loaded, I think.
As to size of playlists, I have a master (900 songs) that defines what will fit onto the ipod , I then generate all the others as subsets of the master (not of the library)- hence I know they will all fit
Can you also clarify something for me: the dialogue box we are discussing is intended, I think, so that one can set the automatic synching of certain playlists between the PC & the ipod. Is that the only way one can select other playlists to go to the ipod - i.e. as static once-offs, not synchronised ?
Apple' docs, I think, are poor in this regard - they assume most ipods are bigger then the users song library and they gloss over the details of this alternate mode of playlist synching.
Thanks - Nick

How to show more than one image on my screen at same time?

I recently upgraded to PS-CS4 from CS3 and notice that I can only view one image on my screen. Is there a way to view more than one image on the screen at the same time? I cannot seem to find a way to change this feature.
Thanks, Richie

John Joslin wrote:
In addition, if you don't like the tabs, select Float All in Windows from the Arrange Documents drop-down in the Menu bar up top.
Or keep pressing the F key.
The drop-down bar also has a conveneint way of fitting multiple images on the screen. See the illustration below:

Fitting more than 80 cols on portrait

Similar Messages

Maybe you are looking for