Fitting new DVD Drive in Mac Pro (Intel 4 Core)

Hi All
Was wanting to add a second DVD writer to my Mac Pro, namely the Pioneer DVR-115D. I assume some modifications are required to get the DVD to pass the tray through the smaller eject slots in the Pro case.
Is there a guide etc anywhere as to what needs to be done?
TIA
Si

Thank you, thank you, thank you! I just installed a second drive in my new Mac Pro 2.8 X2. I could not get the bottom drive to come out at all with the eject button. Then I came here where I should have come in the first place and low and behold there is the answer. The "OPTION" key. Sometimes it is the simplist things that can drive you mad. Thanks Malcolm.

Similar Messages

Adding new hard drive to Mac Pro (quad core)

I've just ordered a new Mac Pro quad core (2.66 GHz) with one GB HD. Since Apple is charging £240 for a second drive I decided to get it from somewhere else. I found a 1GB Western Digital Caviar Green but I also noticed 1GB WD Caviar Black. I wonder if anybody has any experience of those drives and would they work with the latest Mac Pro ?
Does anybody knows what make of drive is Apple using in their latest Mac Pros ?
Tom

*WD Caviar Black 640GB*
HD Tune: WDC WD6401AALS-00L3B2 Benchmark
Transfer Rate Minimum : 59.1 MB/sec
Transfer Rate Maximum : 118.1 MB/sec
Transfer Rate Average : 96.4 MB/sec
Access Time : 11.8 ms
Burst Rate : 125.3 MB/sec
*Black Caviar 1TB:*
HD Tune: WDC WD1001FALS-00J7B Benchmark
Transfer Rate Minimum : 53.9 MB/sec
Transfer Rate Maximum : 108.7 MB/sec
Transfer Rate Average : 86.1 MB/sec
Access Time : 12.9 ms
Burst Rate : 111.5 MB/sec
+(note the slower average to the smaller 640GB model)+
*Green Power 1TB*
HD Tune: WDC WD10EADS-00L5B1 Benchmark
12-23-2008
Transfer Rate Minimum : 41.6 MB/sec
Transfer Rate Maximum : 95.6 MB/sec
Transfer Rate Average : 74.3 MB/sec
Access Time : 14.0 ms
Burst Rate : 117.2 MB/sec
*WD Caviar Blue 640GB*
HD Tune: WDC WD6400AAKS-00A7B Benchmark
Transfer Rate Minimum : 55.6 MB/sec
Transfer Rate Maximum : 113.3 MB/sec
Transfer Rate Average : 90.2 MB/sec
Access Time : 11.8 ms
Burst Rate : 112.9 MB/sec
the 32MB cache did not make a real or noticeable difference in benchmarks
http://www.barefeats.com/hard112.html

Installing new dvd drive in Mac Pro 3,1

I've had just about enough of this old optiarc dvd burner. I've tried to burn 3 verbatim SL dvd-R last night, and I got the message about couldn't calibrate laser power for this device. I have tried to burn at 2x, 4x, 6x, 8x with no success. I used to be able to burn discs sucessfully, but not anymore. I know this is an ATAPI drive aka P-ATA, and drives of this kind aren't exactly easy to find. I was told that there is a S-Ata port or two in my Mac pro, but that it's a real pain in the tush to get at and connect a cable to.. So, any help welcomed
OS 10.6.8, 6 gigs ram, Nvidia 8800 GT video card, if that helps
thanks
John B

couldn't calibrate laser power for this device.
That message is code for, "you are using the wrong discs for this drive". There appear to be several series that use different speeds, and they are NOT compatible. I expect you are using discs that are too "modern" for your older burner, such as 8x discs in a 2.5x burner.
That error message is unbelievably un-helpful and obscure.

New hard drive in Mac Pro showing 0 bytes after partitioning

I bought a Western Digital Caviar 2TB internal hard drive for my Mac Pro (2 x 2.66 GHz Dual Core Intel Xeon (late 2006), 12GB RAM, Mac OS 10.6.8). It already has two 500GB internal drives in two of the four slots.
I slotted the new WD hard drive in and started up the Mac, getting an alert saying there was an unrecognisable disk and did I want to initialise it? Yes, so it opened up Disk Utility.
This showed my two 500GB drives plus the new WD drive at 2TB. To initialise it I erased the disk which failed with an error ("POSIX reports: The operation
couldn't be completed. Input/output error").
I next decided to use Partition instead, choosing just one partition of 2TB, Mac OS Extended (Journaled). After 7 minutes it said the process had been completed and the volume was mounted, though it didn't appear on my desktop, just in Disk Utility. I thought a restart would refresh and show it on the desktop.
Once the Mac was up and running again there was nothing there at all - and now it wasn't even listed in Disk Utility. I shut down, took the hard drive out,
looked at it, scratched my head, replaced it, and turned the Mac back on.
Once again I got an alert telling me the disk was uninitialised and would I like to format it, so clicked OK and Disk Utility opened. This time the disk was
there (WDC WD20EZRX-00DC0B0) but no volume. The info said the drive had a size of 0 Bytes and I could not erase or partition as all buttons were greyed out,
with the Partition tab saying 'this disk is too small to contain partitions'.
So what can I do now? According to macupgrades.co.uk this drive should work in my model of Mac (they recommend and sell it, though I purchased it from NORDPC via Amazon as it was a little cheaper).
http://www.macupgrades.co.uk/store/product_info.php?products_id=532
I tried, with the help of my more computer-literate brother, to erase the disk from the command line via the Terminal, getting a result of "Error: 6: POSIX
reports: Device not configured". (Actually we first tried to reformat it, with an error of "does not appear to have a valid file system format").
Does anyone with more knowledge of such things have any ideas or advice? It would be much appreciated.

Unless the drive and sled are not inserted properly - unlikely - or that other drives don't work in that slot - watch out if true, unlikely but loose SATA cable - it IS a bad drive.
If you don't have a PC, setup Windows VM and use WD Lifeguard which is excellent and tests for things like bad SATA cable communicating.
You could also - I always use Partition tab btw - go in there and set it to exFAT and Windows Master Boot Record. All you want is a good drive. This one is not.
GUID tests first and last 10,000 sectors or more to insure that the partition tables and hidden areas work (they are not it is failing). Use to be that a "backup volume information block" was treated as optional if any sectors failed, now it is not.

External DVD drive in Mac Pro

I've installed an older external DVD drive, internal in my Mac Pro.
I see now that there is slight different in the design of the shuffel. Is it possible in any way to make my old drive, open the 'front door'?
Mac Pro Mac OS X (10.4.8)

Did you remove the front piece from the drive tray? It should unclip easily. Also, there are two different sets of mounting screws, depending on the brand of drive, to set the correct height, so the tray will open the case door. You may be able to adjust the tray height by loosening the front or rear screws.

Creating A New Boot Drive For Mac Pro Desktop

I have a Mac Pro 1,1 using Lion:
I would like to create a new and bigger boot drive but having not done this before I would appreciate any direction that would make this as painless as possible. I will continue to use Lion but am a little lost when it comes to doing this with the download process of Lion as well as transferring what has been created on the current HD in the MacPro. I have a new WD Black 2 TB SATA that I would like to use as the new boot drive. Again, thank you for the help.

Don't. Use. 2TB for system. Seriously.
Use that for data.
Get yourself a $89 Samsung 840 120GB instead along with Icy Dock $15. You will. Love it.
You don't need a large drive for the system. All you need to do is MOVE all the data and media files and every thing else, just leave the small 4GB /Users/myuseraccount/Library on the boot drive with the OS and apps. Everything else gets off loaded.
Leave your drive you ahve now as is for backup. Move data and clone the system.
Clone your system:
How to Clone a Volume
Using Cloning as a Backup Strategy
See also Erasing a Drive, How and Why to Partition a Drive, RAID.
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://macperformanceguide.com/Mac-HowToClone.html
http://www.dummies.com/how-to/content/how-to-partition-your-hard-drive-on-mac-os -x-snow-.html
http://pondini.org/OSX/DU.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/To successfully relocate your operating system, user accounts and data from one storage device to another, meet the following conditions:
The destination storage device (SSD drive or hard drive) you are migrating to should be physically located in the same computer. Moving operating system files from one computer to another computer using software not specifically designed for that computer can cause issues due to software, hardware, and firmware version mismatches.
Always back up your storage device with Time Machine or Disk Utility before you start.
Icy Dock $15
http://www.amazon.com/2-5-3-5-Ssd-sata-Convert/dp/B002Z2QDNE/
SSD: Samsung 840 EVO 128GB
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE120BW/dp/B00E3 W15P0/
2x2GB FBDIMM DDR2 667MHz @ $25
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

Installing new hard drive in Mac Pro - question about compatibility.

I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

Any SATA drive
About urls:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/
is all that is needed.
For a bit more, WD1502FAEX WD Black 1.5TB
http://www.wdc.com/en/products/internal/enterprise/

Cant install mountain lion on a new hard drive 2011 mac pro 17"

for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
4.- tried the same thing on target mode without success
5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
6.- created a different partition to see if it would install it there didn't work.
i just don't understand why
any toughs?
if you answer this you would be a personal hero of mine
cheers

Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Using G5 HD and DVD Drive in Mac Pro

I just ordered a Mac Pro to replace my G5/Paperweight.
G5 is the Dual 2.5Ghz model w/ 160G HD and the Superdrive. According to the Apple Store I brought it to when it crashed, the HD from the G5 is fine (the MoBo went though) as is the Superdrive. Are these compatible with the Mac Pro? What about jumper settings?

As long as the hard drive is a SATA drive it is fully compatible with a Mac Pro. The optical drive should work as well. If there already is an optical drive installed then you may need to jumper the drive for CABLE SELECT if it isn't already so configured.

Install 2nd DVD Drive in Mac Pro 1,1 or 3,1

Would anyone have info on installing a 2nd optical drive in either the 1st-Generation or 3rd Generation Mac Pro? Seems ticky to open the optical compartment open. Thanks.

The instructions can be found here: http://manuals.info.apple.com/MANUALS/0/MA177/en_US/MacPro_OpticalDrive_DIY.pdf
Edit: Note, you need to remove the bezel off of the drive drawer before installing. And make sure you keep the latch on the back of the computer in the up position, it locks the drive carrier in place when in the down position. It can take some wiggling and effort to get the drive carrier out.

My new Mac will not allow the download of CS5, how do i circumvent this issue? I own th dvd however my Mac Pro does not have a disc drive.

My new Mac will not allow the download of CS5, how do i circumvent this issue? I own th dvd however my Mac Pro does not have a disc drive.

Download from Download CS5 products

Can I install leopard on new mac pro intel machine

This machine came with Snow leopard on it but it is conflicting with a USB 3.0 card I have been trying to install.
I THINK it is conflicting because I have a similar card on a 2009 Mac Pro intel,
running Leopard and I have not had one issue since installing IT, many months ago.
So I thought I would put in a new HD (larger 2TB) and start a fresh install and go down to the Leopard so the USB 3.0 PCI card will work!
When I do the reboot to instal from the disc, it just sits on a grey screen for 15 min before I gave up.
I replaced the Leopard disc with a Snow Leopard disc and the boot from disc went as normal.
So..........

Like I said, issues.
You and many others:
http://www.macworld.com/article/1165672/add_usb_3_0_to_a_mac_pro_with_highpoints _rocketu.html
50-50 here:
http://www.amazon.com/HighPoint-RocketU-Quad-USB-3-0/product-reviews/B005K8AXN6
Allegro doesn't fare much better:
http://www.amazon.com/Sonnet-Allegro-2-Ports-Macintosh-USB3M-E/product-reviews/B 0054D8G0E

New Mac Pro (Intel) booting a Power Mac (PC) OS

I have the newest version of the Mac Pro G5 and I'd like to know.... if by installing the OS drive from the older PC based G5, can I still access it as a mountable drive and more importantly, can I make it a bootable drive and boot from it, running the older OS ?
The old drive is running 10.5.8.... it's going into the latest Mac Pro G5. My instincts tell me "no" but it sure would be convenient while I grab some things from my older drive.
Thanks!

Welcome and hope you get a lot of fun and enjoyment from your Intel Mac!
No way can you boot from a G5 OS, even the Apple Partition Table has been known to cause trouble, or the presence of the OS.
The Mac Pro is never called by or use "G5" which refers to 5th generation PowerPC.
Best bet is pull the data you want off the drive and initialize it.
Also, using migration assistant is well known for causing so much trouble and mischief, strongly recommended not to use it for apps, just your data, media and preference files (mail, web etc) and do clean install of your apps.
http://discussions.apple.com/thread.jspa?threadID=435350
Even if most apps are Universal Binary, it doesn't take much, not worth the savings, if you do go against instinct, I'd actually make backup images / clones first. May as well get a good backup set with SuperDuper to start off on right foot.
The newest Mac Pro (Intel, Xeon processor "Nehalem"). And your Mac will come with 10.6.2+ build. It would be a stretch (of the imagination) to boot properly.

New 300GB Raptor Drive with Mac PRo

I just picked up a 300 gb raptor drive for my Mac PRo 4 core 3.0 machine. The drive is not lining up with the plugs in the MP.
Help.

Get the other model then, or buy an adapter sled.
There are three versions.
http://www.wdc.com
http://eshop.macsales.com/search/VelociRaptor

Mac Pro 8 core with boot drive cloned from MacBook Pro

I bought a Mac Pro 8 core and in order to avoid having to reinstall all my stuff, I cloned my OSx (tiger 10.49) partition from my MacBook Pro running vista (installed via bootcamp) to my new MacPro's startup disk. The disk works fine except that the MacPro will not boot to osx unless I use the option key and choose the OSX partition. If i just turn the machine on it doesen't find anything. I think it is looking for windows. What do you think?????
Also, if i restart from the os x partition on my mac pro it stops just before the lound bong sound and seems to be looking for the dvd drive. Any ideas??

Well, I've covered this extensively here:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Not knowing what you did when you migrated from your PB to the MBP, I can't really comment, but it's quite possible it didn't go as well as you think. Numerous users who migrated from PPC Macs to Intel Macs ended up with an Intel Mac that didn't work properly because Intel coded components had been replaced by PPC coded components.

Fitting new DVD Drive in Mac Pro (Intel 4 Core)

Similar Messages

Maybe you are looking for