FITV_POWL_TRIPS, WD ABAP, Unable to select any submitted trips

We're on ECC6 EhP3, EA-HR 603 level 0025. I'm currently setting up the standard SAP WD ABAP Travel ESS applications for the portal. I have run into a frustrating issue. Everything works except selecting a submitted trip or expense in "My trips and expenses". The browser "thinks" briefly, then nothing happens. No errors either.
I've activated the SICF services for the applications and the services suggested here:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/content.htm
I've tried to select a submitted expense with diffrent users, computers, browsers, with SAP_ALL and also directly against the Web AS by testing the service FITV_POWL_TRIPS. All attempts ends with the same results: Everything works fine except selection of an expense or trip from the list.
Does anyone have any suggestions?
Br.
Kristian Alvestad

In adminstrative mode you can configure the abap webdynpro by hiding fields and modifying texts, hide columns in a table. goto menu options in SE80->Test->adminstrative mode->execute.
Right click on the area that you want to change and a popup will come with choices to change standard settings.  Choose it by clicking on it and it will bring up the field that you would like to modify.  This is a global configuration.  You can also do this in the iview under preview mode in content management.
Tom

Similar Messages

  • TS1702 my apps store screen won't move off Newstand. I am unable to select any options eg; updates

    My apps store screen seems to be frozen on Newstand.  I am unable to move from this section.  I an unable to select any other alternatives eg; when I select updates nothing happens. When I select select categories nothing happens.

    Try closing the App Store app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I am unable to select any 3D options in PhotoShop cc. Can anyone tell me why?

    I am unable to select any 3D options in PhotoShop CC. Can anyone tell me why?

    If on a Mac, It's in Preferences > Performance, if using Windows, Edit > Preferences > Performance
    This should be checked on.
    This should be at least 512 MB

  • Unable to select any text

    Hi folks,
    I had asked this question originally back in mid July but didn't get a useful answer.
    Can anyone tell me why the 'select text'  for highlight / add note to text / copy functions is not working? When I right-click the popup menu appears and the aforementioned options are shown but shaded light grey - ie I am not allowed to select them. I'm doing a lot of academic reading and having to resort to PEN AND PAPER to make notes/highlight - HELP!
    Thanks J

    First, try logging in as another user and see if the problem persists. The Guest user would be sufficient.
    If it doesn't happen in another account, we can dig into yours to try to figure out what is causing it.
    Second (if it fails in other account), boot into Safe Mode and see if it still occurs. Safe Mode disables third-party startup items which may be causing the problem. http://support.apple.com/kb/ht1455
    If it doesn't happen in Safe Mode, then we can look at what is running in the background and guess at what might be causing that behavior.
    Note that sometimes problems like this can be resolved by logging out and back in or by a restart.

  • Unable to select any row(s) in table/ALV

    Hi ,
    I am having a problem while selecting a row in a table/ALV.
    I am displaying data in a table which is NOT set to 'Initialize lead selection' in the context.When it is displayed and I try to select a row the row does not get selected(highlighted) in the view.
    However,I am able to perform tasks on 'Onselect' event on the rows.Just that its not getting highlighted neither in table nor in ALV.
    What could be the reason for this ? I do not want the context element to be set as 'Initialize lead selection' as that would highlight the first line of the table when the view is rendered first time.
    Thanks for your help,
    Sandip.

    hi sandip,
    Try this method
    lo_table_sett  TYPE REF TO if_salv_wd_table_settings.
    lo_config_tab TYPE REF TO cl_salv_wd_config_table.
    lo_config_tab = lo_ref_interface_controller->get_model( ).
    lo_table_sett   ?= lo_config_tab.
    lo_table_sett ->SET_SELECTION_MODE( value ).
    value- '00' for auto
             '02' for single
             '04' for multi
             '06' for none
             '07'  for singleNolead
             '08' for multi Nolead
    Regards,
    janakiram

  • I am unable to select any title or picture and drag it to the timeline

    I was working with this proyect normally and suddenly it stopped me from doing it. Please help!!!
    I have the little hand as the cursor, I do not know if that might be teh problem.

    iMovie'11 on a mac.... The project is not long at all... just 4 minutes long, only pictures and titles, no videos included. It is very strange, I tried to reset as you said, and it worked perfectly afterwards, now it is doing it again and again, it gets frozen and then I cannot drag the titles or pictures into the timeline above. It is doing weird stuff .... for example, I am working normally in the project and then I add a title, when I play the project the title that I placed appears over a picture... or sometimes it appears completely black. I know I am not adding the title over the picture....so do you think there is something wrong with the app itself?
    Thanks for your help.

  • Why am I unable to select layers within the layout window - PSE13

    I am working on a project in expert mode. It has several layers. Randomly, I am now unable to select any of the layers within the layout window. I have tried to drag or click on or over an element and nothing happens, it keeps selecting the same element unless I select it from the layers utility on the right hand side. I have tried this with a mouse and a Wacom tablet, same result.

    Fixed by running updates, resetting preferences and rebooting. Phew!

  • Unable to select the SSRS report parameters and execute the reports.

    Hi All,
    We have set of SSRS reports and are been published to SharePoint 2010.After that I have enabled Anonymous user access at SharPoint side,after enabling Anonymous user access no one is able to access the reports so I have removed Anonymous user access
    and the reports are working as normal in IE (internet explorer) but not working thorugh CITRIX (before Anonymous user access provided reports are working normal in CITRIX too), able to open welcome page of sharepoint and unable to select any parameters and
    unable to execute the rpeorts.
    Could you please suggest if you have any solutio as it is very urgent for me.
    Regards,
    Santosh
    Santosh

    Have you tried the basics, such as clearing the browser cache? Note that depending on the version of SSRS in use, Anonymous is not supported with SSRS.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Unable to select Aggregate

    Dear Guru's,
    When i was trying to check if my query is hitting the aggregate or not, i noticed this below message :
    RSRT --> Execute & Debug --> SELECT  ( Display Aggregates found & Select Aggregate )
    Not possibe because --- ____Characteristic 0FISCVARNT is compressed but is not in the aggregate/query
                                       ____Characteristic 0PLANT is compressed but is not in the aggregate/query
    I found that all the characteristics in the query are found in aggregates ..
    please see that the Selection check box is disabled.
    Kindly suggest on how this can be fixed.
    Thanks & Regards,
    Sudhir.

    Hi Phani,
    For the aggregate i am expecting to be hit has its last used date at 07.02.2014.
    i was expecting to force to pick the aggregate using the above procedure i mentioned. Since the selection is greyed out i am unable to select any aggregate .
    Also may i know if there is a way to find out which queries hit a particular aggregates in the past.
    Thanks & Regards,
    Sudhir.

  • Unable to Select from List of Processes

    Hi all.
    I'm having an issue where I am unable to mouse click (or select) from a list of processes. This is happening in three different areas. When I click Start Processes, I am able to select an employee (even from HR Admin I can enter an employee) without any problems. Then after choosing my employee, I click the button 'Select Process' and I get a list of P&Fs processes. However, the top process is pre-selected and I am unable to select any other process. Even though the list of processes are different for HR Admin and manager, I still can only proceed to the Adobe form with the first (top) process. If I click edit to continue to the adobe form it opens the top selected form without an issues.
    This also happens from the "Find Processes" overview screen. After entering my select criteria of processes to search, I get a list of process transactions which have been started but again, I am only able to see the details of the first one (and I cannot select any other process).
    I am running Ehp 3 with the latest patches to BPs and ECC 6.0 (as of 1/3/2010). I've also tried using different browsers including IE 8 and Google Chrome.
    Much appreciated in advance!
    Derrick

    Hi Chris.
    Not sure what to look for when you reference 'controls'. As far as the business packages, they are up to date. I've eliminated the issue being ECC 6 related. Just not sure what to check on the portal side that could be causing this. Any suggestions on how to check (and update if necessary) the controls?
    Thanks,
    Derrick

  • Unable to open any programs in ABAP editor

    Hi folks i'm unable to open any programs in ABAP Editor.
    When ever i try to open any program it goes to short dump.
    Even when i try to open STO4 to view error log.
    it shows following message
    Short text
        Runtime error, short dump could not be written.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program " " had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        Unfortunately, the system cannot carry out a detailed analysis of the
        error, as the table SNAP (which gathers information at the time of
        termination) does not contain a suitable short dump.
    Information About Termination Point in XSLT Prog.
        Termination occurred in the XSLT program " ".
        The call took place using CALL TRANSFORMATION from the ABAP
        program specified below.
        In the source code, the termination point is in line " "
        of the (Include) program " ".
    Internal notes
        The termination was triggered in function " "
        of the SAP kernel, in line " " of the module " ".
        The internal operation just processed is " ".
        Internal mode was started at " ".

    hi,
    check whether any exit has been implemented for se38 and because of some statements in that it may goto dump.
    also try to open ur program from SE80.if u have access to se80 then u can do it from there itself.
    reward points  if hlpful.

  • SELECT-OPTIONS field unable to make any selections

    Hi!
    The field which has been declared as follows is unable to make any selections.
    It seems like a field which is defined "only for output". Under Screens within the
    elementlist is this attribute for this field is not activated as "only for output".
    What else can the reason be for that ?
    SELECT-OPTIONS: intst_pt  FOR  cjit07-intst_old.
    Regards
    Ilhan

    Hi Ilhan,
    Cjit07 is not a dictionary structure or table.
    therfore you cannot assign the value cjit07-intst_old.
    that statement is logically incorrect.
    thats why it is not able to make any selections.
    Reward points if helpful.
    Regards,
    Bhanu

  • I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.

    I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.  Nothing happens.  I have also tried to right click on the item, but a delete option is not listed.  What do I need to do to get rid of some books?

    Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync

  • I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages  has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also ca

    I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages  has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!

    Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
    Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

  • HT1766 I have installed the new software onto my iPhone4; I have backup my data; I am unable to progress any further from the 3 iPhone options - I selected from iTunes b/up which worked but has stalled since requested to connect to iTunes

    I have updated the new software onto my iPhone4; I have backup my data; I am unable to progress any further from the 3 iPhone options - I selected from iTunes b/up; then the iPhone requested that I connect to iTunes which I have done and it has now stalled - nothing has happened.

    Hey Miss Apple,
    Thanks for the question. I understand you are experiencing issues with restoring your backup from iTunes. The following resources may help to resolve your issue:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Thanks,
    Matt M.

Maybe you are looking for