FITV_POWL_TRIPS

Hello,
for travel expenses we are using Web Dynpro Application - FITV_POWL_TRIPS. This WD application is related
to one usage for receipts. Usage is defined dynamically and I want to know how we can change usage
in order to redirect it to a new webdynpro component.
Regards
Beserithan

Hi, Tom,
We are also using the ABAP webdynpros for travel. Under FITV_POWL_TRIPS a tabstrip is displayed with several different tabs . I have make invisibble the two tabs the u2018All My Travel Requestsu2019 and u2018All My Travel Plansu2019 through the following path:
Content Administration => Portal Content => LSI Content => HR => Travel Expenses => Employee Self Service => ERP 2005 EhP2=> iViews => Travel Expenses => My Travel Trips and Expenses => click on Preview Tab => Right click on the tab area and select u2018Settings for Current Configurationu2019 to get into u2018Tabstrip Controlu2019
But the change takes effect only for myself user id.   How you managed to apply it globally?

Similar Messages

  • To add column in an alv of FITV_POWL_TRIPS component

    Hi all
    I have a requirement to add column to an alv which is in FITV_POWL_TRIPS.Now the prob is that in that component we r using another  compent SALV_WD_TABLE from which alv is taken.This what I understood
    fitv_powl_trip
    powl_ui_comp- <-getting tabstrips
    powl_table_comp-<-getting refresh link
    salv_wd_table- <- getting table
    As far as I understood I think I have to find the comtext binded to DATA of SALV_WD_TABLE .Im not able to get it.If anyone has previous experience with this pls share
    Edited by: m.reeha verma on Apr 30, 2009 6:15 AM

    Hello Reeha,
    Could you please share the solution for this ?
    Thanks in Advance.
    Thanks,
    Prakhar

  • Change Expense Report in FITV_POWL_TRIPS Application

    Hi,
    In my workflow, i would like to call the change expense report in FITV_POWL_TRIPS application.
    In FITV_POWL_TRIPS Application, it shows all the expense reports and if user wants to Change, then need to press the CHANGE button which shows in the ALV control, in turn calling the SALV_WD_TABLE webdynpro component.
    I would like to know which page or iview do i need to call in my workflow, for Change expense report?
    Regards

    Hi,
    the buttons in FITV_POWL_TRIPS always jump to the original Ressources of your Backend's Homepage Framework, apparently somewhere is hardcoded these original sap ressources are used. If you can't, for whatever reasons, use the original ressource for the respective PCD-URL, you have to enhance/modify the respective method in WD4A...
    I couldn't find out myself when we tested Travel Management on our sandbox system. I wager there's some method for ALV-Grid Designing... if you happen to find out, let me know
    If you can, take my advice and use the original ressources.
    best regards, Lukas

  • Remove attachments from FITV_POWL_TRIPS for Expenses in overview screen

    We are trying to remove the attachments from being available in the ABAP Web Dynpro ESS Travel/Expenses screens.
    In the My Trips & Expenses overview of the ABAP Web Dynpro - FITV_POWL_TRIPS - I believe - an ALV is displayed and one of the columns is Attachments - under My Expenses Report tab.  We would like to remove it. 
    As well as the attachment button and functionality that appears when you go into the Expense Report for change.
    Is there an easy way to do this? 
    The ALV seems to be generated dynamically from the POWL query and I have not been able to find any config that will allow us to remove the attachments functionality.
    Any help would be appreciated.
    Cheers
    Murray

    In adminstrative mode you can configure the abap webdynpro by hiding fields and modifying texts, hide columns in a table. goto menu options in SE80->Test->adminstrative mode->execute.
    Right click on the area that you want to change and a popup will come with choices to change standard settings.  Choose it by clicking on it and it will bring up the field that you would like to modify.  This is a global configuration.  You can also do this in the iview under preview mode in content management.
    Tom

  • Add new custom field in FITV_POWL_TRIPS

    Dear All,
    I would like to add my custom field in FITV_POWL_TRIPS Application. The program basically having 5 tabs in output. i have added my custom field in PTRM_POWL_WEB_TRIPS_EXT_T Structure. Now i wanted that field to be displayed in the tab of All My Travel Plans Tab ,  Can any one suggest me how to make display of that field.
    i have seen the Application.configuration FITV_POWL_TRIPS . But i could not able to see the field names list anywhere.
    Please put on some light.

    In Webdynpro Component,  FITV_POWL_TRIPS ......i would like to add one more field in the output of this application under "All My Travel Requests" tabstrip .
    Access path for this application.
    Go to SE80 -> Webdynpro Component -> FITV_POWL_TRIPS ->  Test...
    Under the All My Travel Requests Tabstrip i want to add one more field in the below table control. Right this tab control is displaying 8 Columns.
    My Findings:
    1. The above fields are retrieved from PTRM_POWL_WEB_TRIPS_EXT_T structure. So i have added a Append field in the structure.
    2. In debugging i am able to see my field in the above mentioned structure.
    3. The Tab Strib is calling from POWL_UI_COMP application.
    4. The Table Control is from SALV_WD_TABLE
    Need:
    1.Where is the 8 fields layout are creating by the sytem
    2.How can i add one more field ?
    3.Where to add and how ??
    Please help me...
    Regards,
    Prakash.N
    +91 9980742974

  • FITV_POWL_TRIPS, WD ABAP, Unable to select any submitted trips

    We're on ECC6 EhP3, EA-HR 603 level 0025. I'm currently setting up the standard SAP WD ABAP Travel ESS applications for the portal. I have run into a frustrating issue. Everything works except selecting a submitted trip or expense in "My trips and expenses". The browser "thinks" briefly, then nothing happens. No errors either.
    I've activated the SICF services for the applications and the services suggested here:
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/content.htm
    I've tried to select a submitted expense with diffrent users, computers, browsers, with SAP_ALL and also directly against the Web AS by testing the service FITV_POWL_TRIPS. All attempts ends with the same results: Everything works fine except selection of an expense or trip from the list.
    Does anyone have any suggestions?
    Br.
    Kristian Alvestad

    In adminstrative mode you can configure the abap webdynpro by hiding fields and modifying texts, hide columns in a table. goto menu options in SE80->Test->adminstrative mode->execute.
    Right click on the area that you want to change and a popup will come with choices to change standard settings.  Choose it by clicking on it and it will bring up the field that you would like to modify.  This is a global configuration.  You can also do this in the iview under preview mode in content management.
    Tom

  • Error when executing standard WDA  FITV_POWL_TRIPS

    hi ,
    when i am executing  WDA  FITV_POWL_TRIPS following error is coming
    some logon error message is coming , that is,
    service cannot be reached.
    URL http://...../sap/bc/webdynpro/sap/fitv_powl_trips call was terminated because the corresponding service is not available.
    The termination occurred in system D10 with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    i think i have to activate the service or something like that from some tcodes.
    please reply.
    regards,
    Yogesh

    Hello,
    Check if the [Web Dynpro ABAP Configurations|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm]  are correct, specially the [SICF Services|http://help.sap.com/saphelp_nw04s/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm].
    Regards.

  • Web Dynpro - FITV_POWL_TRIPS Help

    Hi,
    My Client's travel policy establishes maximum daily limit for the reimbursement of meals. Standard SAP enforces maximums at receipt level, but cannot sum receipts and enforces a daily  maximum. Since as associate will mostly likely have several meal receipts for a single day, Client want summarize these receipts and flag a policy violation (with warning message) if the daily limit has been exceeded.
    We are implementing ESS/MSS and for travel expenses we are using Web Dynpro Application - FITV_POWL_TRIPS.
    Please let me know how to achieve summarized check on daily max limit.
    Regards,
    Amey

    I have some other iviews on ESS personal information like addresses and once it is changed/edited by employee on portal I have to shoot an email to HR department.
    So is there any enhancement I can use to achieve this functionality.
    And thanks for your previous inputs, it was useful.
    Regards,
    Amey

  • Personalization - FITV_POWL_TRIPS -

    I have tried to hide several columns in the FITV_POWL_TRIPS abap webdynpro under adminstrative mode to transport from our DEV system up the landscape to QAS and PROD.  I receive the popup to create a task when saving the changes.  When going into se10 to transport the changes I have two requests created.  One with the object in the task and one request with nothing in it?  The changes take effect in the DEV client but when transporting the request with the object     "115* AFITV_POWL_TRAVELLER" in the task request to QAS or PROD they do not get applied.  I have also tried this from the preview mode of the iview for the travel webdynpro.  This creates two requests with only one of the requests having an object defined for it.  I get the same results.  I need to hide specific columns and show certain columns.  Has anyone else experienced this problem using personalization to hide or make visible the columns of this application.  I really need to hide and make visisble certain columns for the travel  management solution in production.
    Thank you
    Tom

    Hi, Tom,
    We are also using the ABAP webdynpros for travel. Under FITV_POWL_TRIPS a tabstrip is displayed with several different tabs . I have make invisibble the two tabs the u2018All My Travel Requestsu2019 and u2018All My Travel Plansu2019 through the following path:
    Content Administration => Portal Content => LSI Content => HR => Travel Expenses => Employee Self Service => ERP 2005 EhP2=> iViews => Travel Expenses => My Travel Trips and Expenses => click on Preview Tab => Right click on the tab area and select u2018Settings for Current Configurationu2019 to get into u2018Tabstrip Controlu2019
    But the change takes effect only for myself user id.   How you managed to apply it globally?

  • FITV_POWL_TRIPS new button

    Hi all,
    I would like to add a new button to the FITV_POWL_TRIPS web dynpro that opens me a popup for another link (e.g. http://www.sdn.sap.com)
    I already manage to put that button on screen by setting the metod GET_ACTIONS of feeder. My problem is on the handle_action, where I can't call the popup with the url.
    Anyone can help me?
    Best regards,
    Luis Cruz

    Hi,
    Kindly refer the below link for the redirection of third party travel planning.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/b8/047a31e5554d9aabda408ebcb7a41b/frameset.htm
    Regards,
    LNB

  • Error while executing - FITV_POWL_TRIPS

    Hello Experts,
    I am getting the below error when I am executing WDA  FITV_POWL_TRIPS.
    A RAISE statement in the program "SAPLPTRM_WEB_EMPLOYEE_SERVICES" raised the  exception condition "USER_NOT_FOUND". Since the exception was not intercepted by a superior program, processing was terminated.
    Kindly can somebody help me.
    Thanks.

    Solved myself...executed the WDA - FITV_POWL_TRIPS on the user name whose travel details I had to access - that solved my problem.
    Thanks for the support.

  • WDA - FITV_POWL_TRIPS Enhancement

    Hello Experts,
    I am trying to enhance WDA FITV_POWL_TRIPS .  When I goto person's 'All My Expense
    Reports' tab - there is column which displays attachments which are attached to corresponding trips. I want to add my custom code to how the attachments are displayed.
    I am new to POWL and have studied feeder class CL_FITV_POWL_FEEDER_TRIPS but could not get a clear idea in which method is the code written for the 'All My Expenses Report' tab.
    Any suggestion would be great help to me.
    Thanks.

    Dear Vasu.
    I have the same issue tha you had.
    I posted my doubt with the following issue:
    Personalize Table ALV POWL in the Portal Travel
    Regards
    Carmen G.

  • FITV_POWL_TRIPS  hide buttons in this application

    Hi friends,
      Here is a requirement to hide create new expense report button in this application. It is a powl component.how can i do this.
    Is it possible through configurations / coding ? i am new to powl. pls give any suggestions .

    Hi,
    It is possible through coding through enhancement. I had this issue a few months.
    Do the following:
    1. Go to SE24, CL_FITV_POWL_FEEDER_TRIPS
    2. Navigate into method IF_POWL_FEEDER~GET_ACTIONS
    3. Make an Implicit Enhancement at the end of the method
    There is a table which holds all the buttons which are dynamically created, you'll just have to delete the respective entry.
    I deleted the "Create New Travel Plan" Button. Take my code as a reference.
    Delete c_action_defs WHERE actionid = 'CREATE_TP'.
    I guess Travel Expenses has the key CREATE_TE or something, check it out by debugging.
    best regards, Lukas

  • ABAP Webdynpro component for travel request - customization

    Hi All,
    In EHP5 ESS Travel Management - Travel expense creation - I want to prevent users from raising the travel expense only after the travel request is approved.
    For this requirement  , ie to modify the FITV_POWL_TRIPS - In this component either i want to disbale the link create /change in travel expense colum  if the travel request is not approved or i want to give a error message on click of travel expense report if the corresponding travel request is not approve.
    If any one has done please let me know how this can be done . If with customising the code is there any way through spro config this can be controlled.
    Thanks
    Thanks & Regards
    Shyam

    You can use P_TRAVL authorisation check for the status field
    Read here
    http://help.sap.com/saphelp_46c/helpdata/en/b6/cda0db49e911d189060000e8322f96/content.htm
    Please kindly read the note 574467. We deliver the BADI
    FITV_PERSNO_AUTH_CHK empty and we provide a documentation on how
    this should work. In your case you should modify the BADI to check your
    multiple structural profile but on how to do this depends on your
    modification.

  • Problem in a webdynpro abap component - Really very urgent PLZ help me

    Hi Experts,
    I am working with FITV_POWL_TRIPS webdynpro component.In that my requirement is to keep a button and input fields near the create travel request button and to add some functionalities.
    I worked in the  component , unfortunately the component get corrupted. i don't know how to retrieve the component to its original state.I tried with version management but no use.
    Can anybody suggest me how to retrieve the component. Any of your inputs is valuable to me.
    if the patch should be installed is the only way mean plz tell me the patch details.
    Actually FITV_FPM  , this component get damaged. This component is under FITV_POWL_TRIPS.
    Regards,
    Ramanan
    Edited by: Ramanan Panchabakesan on Jul 9, 2008 12:10 PM

    Dear Thomas,
    Really i failed to use the enhancement mode to work with that POWL component.Actually the thing i did is added an attribute directly to the component controller of that component and  binded it to the drop down then activated , it shows some error "Configuration missing error" so again i deleted that attribute and reactivated it again but it shows the same error. so i tried to retrieve it back from version.But failed, then compared with other system the methods and attributes are same as it is.Finally copied the methods and code from that system though all are same in two systems, then activated.No error now.But clicking on the "create request" button the component shows a road map step with 1 as completed status.It looks with the following information
    Fite_Request
          1
    Completed
    and with two buttons one is disabled and thats capiton is Previous step and the other is exit that is enabled
    when i clicked that exit button it again goback to the intial screen of FITV_POWL_TRIPS.
    Before it shows with some 3 or 4 road map steps with some different status.
    Tell me any other way to retrieve it.As the patch to be  reinstalled is the solution means please tell in which patch this resides.Technically i want to retrieve it, going for patch update is secondary and i go for that if and only if there is no other way.
    with hope and regards,
    Ramanan.P
    Edited by: Ramanan Panchabakesan on Jul 15, 2008 7:34 AM

Maybe you are looking for