Five Multiple choice Questions

1. What is the aim of aggregates?
This question has more than one answer.
a. Balance of cost of aggregate
b. Maintenance to the cost of data retrieval
c. Reduce data storage requirements
d. Increase query performance
e. None of the above
2. In which case can you not use aggregates in SAP BW?
This question has more than one answer.
a. Attributes of time-dependent characteristics
b. Slowly changing dimensions
c. Hierarchy structure
d. Degenerate dimension
e. None of the above
3. Which statement describes the functionality of drill-down?
This question has only one answer.
a. Jump from one query to another
b. Manipulate the results of a query to see increasing levels of detail about the data
displayed across the top of a report without having to rerun the query
c. Manipulate the results of a query to see increasing levels of detail without having to
rerun the query
d. Manipulate the results of a query to consolidate detailed data to a higher level of
summarization without having to rerun the query
e. None of the above
4. What does the Data Changes Aggregate Update Program do?
This question has more than one answer.
a. Activate all hierarchies and attributes
b. Generate all aggregates affected with a new change ID
c. Set the pointers to the right change ID
d. Roll up all aggregates that have been changed since the last update
e. None of the above
5. Which of the following statements are correct concerning the report-to-report interface
(RRI)?
This question has more than one answer.
a. It is not possible to call a query directly using the RRI
b. The RRI allows you to analyze data summarized in SAP BW on a higher level, and
also to look at detailed line items on a document level
c. The RRI allows you to drill through from an overview query of an ODS object but
not to a detail query of another InfoCube
d. The RRI allows you to drill through to an SAP R/3 OLTP system to display detailed
data not loaded into SAP BW
e. Using the RRI, you are able to call various reports (receiver reports) from a single report
(sender report)

Your welcome .
Have you used Question pool, if yes, how many Random Question Slides have you used?
If the user answers one of the question incorrectly, then will he see all 5 questions?
Have you set any Advance actions for the project.
Regards,
Anjaneai

Similar Messages

Best app to import and study multiple choice questions.

Hi,
I'm searching for an app to help study for an exam.
Part of the studying strategy is to study by the previous exams questions. I have those (a lot of them) in text format.
The app would need to have:
- Support for multiple-choice questions;
- Easy, fast and automated way of importing the questions;
Would be nice to have:
- Ability to include a rich-text comment along with the right/wrong answer;
- Support for tagging each questions.
I've used the search function and found this:http://forums.macrumors.com/showthread.php?t=1041085 but it's been a while since then.
thanks in advance

Hi Konrad;
What approach would you recommend to import and export EBS data? Open Interfaces, PL/SQL, web services or anything else?For your question please check below notes:
Export/import process for R12 using 11gR1 [ID 741818.1]
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
General Notes For E-Business Suite Release 12 [ID 986673.1]
Please also check below thread:
how to export data from ebs
how to export data from ebs??
Also check below search which could help you about your issue:
http://forums.oracle.com/forums/search.jspa?threadID=&q=import+export+&objID=c3&dateRange=all&userID=&numResults=15
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+data&objID=f475&dateRange=all&userID=&numResults=15&rankBy=10001
Hope it helps
Regard
Helios

Multiple Choice Question Issues

I am embedding a quiz within my presentation with individual
question slides interspersed throughout the presentation. These
questions are pulled from a couple of different question pools. I
want to use a multiple choice question that branches to different
parts of the presentation depending on the correct or incorrect
answer. If the user answers the question incorrectly, I send them
to the next slide which has two click boxes. On this slide, they
can either click one box to move back in the presentation and
review the material or click another box to move them forward to
another multiple choice question. If they go back and review the
information, they would eventually return to the same multiple
choice question to try it again. (This is the desired navigation,
anyway.)
What actually happens is that when the user goes back to
review the information and then finally returns to the question,
the question has not been reset and still shows the incorrect
answer marked with no way to clear it.
I have used this same navigation on a drag-and-drop type
question and it works fine. All the settings for the
multiple-choice questions are set the same as in the drag-and-drop
question.
Any help in making this work correctly would be greatly
appreciated.

I can't see where that error might arise except possibly for a case where an AS2 radio is used since it appears they don't have a group property, but an AS3 radio button does. Check to be sure that your Flash Publish Settings are set to use AS3. AS3 errors normally have error numbers which also makes the error you quoted ring of an AS2 scenario.
Here's a link to the file I made based on your code that works fine and doesn't display the errors you mention. It is a CS3 file.
http://www.nedwebs.com/Flash/AS3_Radios.fla

Select more than one answer on a multiple choice question

How do you select more than one answer on a multiple choice question on an employment application on the internet?

marmaldonado,
Is this a PDF form? Or a web form?
Clinton

Adobe Captivate 8 system variable "cpQuizInfoAnswerChoice" is empty for random multiple-choice questions.

Does anyone run into this problem when capturing the user answer for a random question slide? Adobe Captivate 8 system variable "cpQuizInfoAnswerChoice" is empty for random multiple-choice questions.

Hi Shriyansh.
The reason I am interested in capturing the user answers in Submit All situation is that I know after I published the test using SCORM 2004, all the user responses were captured in "cmi.suspend_data" because my test can resume the test to the last exit question in the middle. However, when I looked at the suspend data value, I have a hard time to understand the pattern and pick out the meaningful user question responses data. I really need help from you to understand how the suspend data value was constructed and how to parse this data. Another area I thought it's easy to get the user question responses data is the interaction records, but I always got only one question (the last randomly sampled question) interaction record. See the following generated XML SCORM 2004 4th edition data. Could you help me figure out how to interpret the following suspend data to get the users responses to each test question? And why I only got one question interaction record? Thanks again for your help, Zhuoran.
<ArrayOfKeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.success_status</Key>
<Value>failed</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.completion_status</Key>
<Value>completed</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.exit</Key>
<Value>suspend</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.mode</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.suspend_data</Key>
<Value>M1A%24nP1A%24nP1FPool1B1FPool2A1FPool3A1FPool4B1FPool5B1FPool6B1FPool7A1FPool8B1FP ool9A1GPool10A1A%24nP000BB0100C11KCA%7E%24nU*9aAlO%7E%24nU*3eOlO1000B00AEAH0%3B1%3B2%3B3BA B0B0BBB0B0BCB0B1BDB1B0DB%7E%24nU*-EBlO%7E%24nU*YoOlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B1BC B0B0BDB1B0EC%7E%24nU*flBlO%7E%24nU*IyOlO1010B00KEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B0BDB1B1FD %7E%24nU*nWMlO%7E%24nU*kRPlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B1BCB0B0BDB1B0GE%7E%24nU*kRP lO%7E%24nU*arPlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B1BDB1B0HF%7E%24nU*arPlO%7E%24nU*c HQlO1000B00AEAH0%3B1%3B2%3B3BAB0B1BBB0B0BCB0B0BDB1B0IG%7E%24nU*cHQlO%7E%24nU*kfQlO1010B00K EAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B0BDB1B1JH%7E%24nU*kfQlO%7E%24nU*74QlO1010B00KEAH0%3B1%3B2 %3B3BAB0B0BBB0B0BCB0B0BDB1B1KI%7E%24nU*74QlO%7E%24nU*IYRlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BB B0B1BCB0B0BDB1B0LJ%7E%24nU*IYRlO%7E%24nU*aHSlO1000B00AEAH0%3B1%3B2%3B3BAB0B0BBB0B0BCB0B1BD B1B00PNvar_ToggleTOCBAPvar_ToggleAudioBAEv_S1BAEv_S2BAEv_S3BAEv_S4BASv_completionStatusBAP v_successStatusBAKv_locationBAFv_scoADls3NreturnMessageBAHv_scoreBAOv_scorePercentBAPv_cur rentChoiceBAPv_stringChoicesBA</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.entry</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.location</Key>
<Value>Posttest%20Results</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.launch_data</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.learner_name</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions._count</Key>
<Value />
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.id</Key>
<Value>LSQ19C</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.type</Key>
<Value>choice</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.learner_response</Key>
<Value>The_vehicle_is_under_warranty_for_the_life_of_the_lease</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.result</Key>
<Value>incorrect</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.correct_responses.0.pattern</Key>
<Value>Genuine_Subaru_Accessories_can_be_residualized_as_a_part_of_the_lease</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.description</Key>
<Value>What is one feature of a Subaru Motors Finance lease?</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.weighting</Key>
<Value>10</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.latency</Key>
<Value>PT3S</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.objectives.0.id</Key>
<Value>Quiz_2014924125021</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.interactions.0.timestamp</Key>
<Value>2014-11-20T13:02:01.0-06</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.raw</Key>
<Value>30</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.max</Key>
<Value>100</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.min</Key>
<Value>0</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.score.scaled</Key>
<Value>0.3</Value>
</KeyValueOfstringstring>
<KeyValueOfstringstring>
<Key>cmi.session_time</Key>
<Value>PT31.99S</Value>
</KeyValueOfstringstring>
</ArrayOfKeyValueOfstringstring>

Multiple choice question in intractive pdf?

Hi,
I have a question about Multiple option question. How to create Multiple option single answer question with explanation popup in interactive PDF. Please guide me.
Regards
Anil

Yes, this worked fine.
I just had to place the animal to the left of the table and just reduce it slightly in size. It worked fine.
Thanks!

Dashboard Multiple Choice Questions

Hai all
Please answer for the below Mention Questions.
Which are the benefits of using Xcelsius?
     Perform what-if analysis.
     Represent tabular data graphically.
     Identify problems in source data or business assumptions.
     Alert your organization to potential issues and opportunities.
Which element of the Xcelsius interface is used to select and hide components on the canvas?
     Components Browser
     Object Browser
     Property Sheets
Which type of component has drill-down functionality?
     Sliders
     Gauges
     Progress Bars
     Charts
How often is the data in the embedded Excel workbook updated?
     Each time a new cell is selected
     Never
     At customized intervals
     At fixed intervals
According to best practices, why should you color code cells in your embedded Excel workbook?
     In order to conform with the Spread Sheet Standards Association's style guide.
     It makes it easier to find the cells that you want to use in your models.
     Xcelsius automatically selects cells with coloring and converts them into components.
What is the difference between embedded data and connected data models?
     Embedded models use data from file servers; connected models use data from web sites
     Embedded models use data from an embedded Excel workbook; connected models use a data connection to an external data source
     No difference
How do you create a legend in a chart?
     Bind Category axis labels to the cell with the Series name in the General property sheet
     Bind the Legend to the cell with the Series name in the General property sheet
     Bind the entire data range to the legend in the Appearance property sheet
     Select Create Legend from the General property sheet.
     Select Enable Legend from the Appearance property sheet
When binding a chart to non-contiguous data, which binding method should be used?
     Data - By Series
     Data - By Range
     Category Labels
What is the maximum number of cells to which a single value component can be bound in the embedded Excel workbook?
     0
     1
     2
     3
What happens when you bind a single value component to a cell with a formula?
     The single value component behaves like any other component.
     You must change the input options on a Property sheet to make it work.
     The single value component behaves like any other component, but performance of the visualization is degraded.
     Nothing. You cannot bind a single value component to a cell with a formula.
11. If you want to set a maximum value of 50% for a single value component that references a percentage in the source file, what would you do?
Your Ans. Sol- ution Points Please select the correct answer.
     Bind the Common tab of the Behavior property sheet to the value 0.05.
     Bind the Common tab of the Behavior property sheet to the value 50.
     Set a scale limit of 50% on the General property sheet.
     Set a scale limit of 0.5 on the General property sheet.
     Set a scale limit of 0.5 on the Behavior property sheet.
Explanation:
12. What happens if you set up alerts for a multi-series chart?
Your Ans. Sol- ution Points Please select the correct answer.
     The alerts must be set up for each series.
     The same alerts apply for all series.
     The alert setup is automatically determined by the thresholds for the series.
     Nothing. You cannot set up alerts for a multi-series chart.
Explanation:
13. As a best practice when you start designing a dashboard you sketch flow diagrams, mind maps, or simple lists. What best practice questions should you ask yourself from the user's perspective? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     Who will use the dashboard?
     What tables do they need?
     What decisions or actions will they drive from the dashboard?
     What database(s) will supply the needed data?
     What information will they need to drive action and decisions?
Explanation:
14. Which of the following are valid methods for bringing data from Excel into an Xcelsius model? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     Copy from Excel and paste into the embedded Excel workbook in Xcelsius
     Import external Excel workbook into embedded Excel workbook
     Enter data manually into the embedded Excel workbook in Xcelsius
     Create a sum formula that points to an Excel workbook outside of Xcelsius
Explanation:
15. Which Property sheet would you use to indicate performance using color coding?
Your Ans. Sol- ution Points Please select the correct answer.
     General
     Drill Down
     Behavior
     Alerts
     Appearance
Explanation:
16. When a selector is used with data insertion, which insertion type is valid?
Your Ans. Sol- ution Points Please select the correct answer.
     Filtered Rows
     Filtered Colums
     Filtered Cells
Explanation:
17. What formats can you use for embedded images that you import into the fish-eye picture menu or the sliding picture menu? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     BMP
     PNG
     WMV
     SWF
Explanation:
18. How do you create interactive links in your map that will display a chart?
Your Ans. Sol- ution Points Please select the correct answer.
     Include a row or column in the embedded Excel workbook that references the appropriate abbreviations or names for the areas.
     Define the areas in the Behavior tab of the Properties window.
     Set up a series for each geographical area.
     Nothing, Maps are not interactive. You must set up hotspots to link to data in other charts.
Explanation:
19. For which settings do you need to include the specific map areas in alphabetic order along with the data? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     Source data
     Data Insertion
     Display data
     Alerts target
Explanation:
20. Which data insertion option passes the location of the data in the data range to the selector?
Your Ans. Sol- ution Points Please select the correct answer.
     Value
     Position
     Row
     Status
Explanation:
21. How do you link your data to specific areas in a map?
Your Ans. Sol- ution Points Please select the correct answer.
     Include a row or column in the embedded Excel workbook that references the appropriate abbreviations or names for the areas.
     Define the areas in the Behavior tab of the Properties window.
     Set up a series for each geographical area.
     Nothing. Maps are not interactive; you must set up hotspots to link to data in other charts.
Explanation:
22. Which component offers the drill-down feature?
Your Ans. Sol- ution Points Please select the correct answer.
     Single Value Components
     Selectors
     Charts
     Maps
Explanation:
23. When using dynamic visibility, which is true? (Select all that apply)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     A component is visible only if the value of the Status field matches the value of the Key field.
     Each component that will have a visibility change associated with the same event should be bound to the same status cell, but each component should be bound to a unique key.
     An Excel formula is required to determine whether components are visible.
     Each component that will have a visibility change associated with the same event should be bound to a unique status cell, but each component should be bound to the same key.
Explanation:
24. What components and functions can be used to toggle dynamic visibility? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     A cell contained within the destination range specified in a selector
     A VLOOKUP formula within a cell
     A single value component
     A range contained within a destination range specified in a selector
Explanation:
25. On which property sheet can Dynamic Visibility be configured?
Your Ans. Sol- ution Points Please select the correct answer.
     Alerts
     Appearance
     Behavior
     General
Explanation:
26. When testing your model you discover that the dynamic formatting in your Excel workbook does not appear in your published model. What should you do?
Your Ans. Sol- ution Points Please select the correct answer.
     Setup dynamic visibility in your model.
     Remove dynamic formatting from your Excel workbook.
     Make sure that the text object is not hidden in the Object Browser.
     Reformat your Excel workbook cells to avoid using bold.
Explanation:
27. Which are the correct steps for setting up dynamic visibility?
Your Ans. Sol- ution Points Please select the correct answer.
     From the Behavior property sheet, bind Dynamic Visibility Status to a destination range and bind Dynamic Visibility Key to a label.
     From the Behavior property sheet, bind Dynamic Visibility Status to a label and bind Dynamic Visibility Key to a destination range.
     In the Object Browser, place a checkmark under the Eye icon to hide the component.
     From the General property sheet, bind Dynamic Visibility Status to a destination range and bind Dynamic Visibility Key to a label.
     From the General property sheet, bind Dynamic Visibility Status to a label and bind Dynamic Visibility Key to a destination range.
Explanation:
28. Alerts can be enabled for the following components: (Select all that apply)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     Selectors
     Containers
     Single Value components
     Calendars
Explanation:
29. Which of the following are valid publishing formats for Xcelsius visualizations? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     SWF embedded in PowerPoint slide
     SWF embedded in Word document
     SWF embedded in ZIP compressed file
     SWF formatted for BusinessObjects Enterprise
Explanation:
30. Management has asked to see a snapshot of the data in the Excel workbook embedded in a published visualization. Of the methods below, which will produce a spreadsheet that contains a snapshot of the data? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     Switch to Preview mode. From the File menu select Snapshot > Current Excel Data.
     Switch to Design mode. From the Data menu, select Export Current Excel Data.
     Highlight and copy the embedded Excel workbook from the Xcelsius interface and paste into new workbook in Excel.
     Switch to Design mode. From the File menu, select Export Settings > Current Excel Data.
Explanation:
31. Which of the following methods will produce an .XLS file that contains a copy of the data in the .XLF embedded Excel workbook? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     From the Data menu, select Export.
     From the File menu, select Snapshot > current Excel data.
     From the File menu, select Preview > File > Snapshot > current Excel.
     From the File menu, select Export > Word.
Explanation:
32. Which files created in SAP BusinessObjects Xcelsius Enterprise 2008 can be sent to BusinessObjects Enterprise? (Select all that apply.)
Your Ans. Sol- ution Points More than one answer is correct. Please choose the correct answers.
     XLS (Excel)
     .SWF (Xcelsius Flash)
     .XLF (Xcelsius design)
     .XML (Extensible Markup)
     .HTML (Hypertext Markup)

1.Which are the benefits of using Xcelsius?
2.Which element of the Xcelsius interface is used to select and hide components on the canvas?
3. Which type of component has drill-down functionality?
4. How often is the data in the embedded Excel workbook updated?
5. According to best practices, why should you color code cells in your embedded Excel workbook?
6. What is the difference between embedded data and connected data models?
7. How do you create a legend in a chart?
7. When binding a chart to non-contiguous data, which binding method should be used?
8. What is the maximum number of cells to which a single value component can be bound in the embedded Excel workbook?
9. What happens when you bind a single value component to a cell with a formula?
11. If you want to set a maximum value of 50% for a single value component that references a percentage in the source file, what would you do?
10. What happens if you set up alerts for a multi-series chart?
11. As a best practice when you start designing a dashboard you sketch flow diagrams, mind maps, or simple lists. What best practice questions should you ask yourself
from the user's perspective? (Select all that apply.)
12. Which of the following are valid methods for bringing data from Excel into an Xcelsius model? (Select all that apply.)
13. Which Property sheet would you use to indicate performance using color coding?
14. When a selector is used with data insertion, which insertion type is valid?
15. What formats can you use for embedded images that you import into the fish-eye picture menu or the sliding picture menu? (Select all that apply.)
16. How do you create interactive links in your map that will display a chart?
19. For which settings do you need to include the specific map areas in alphabetic order along with the data? (Select all that apply.)
17. Which data insertion option passes the location of the data in the data range to the selector?
18. How do you link your data to specific areas in a map?
22. Which component offers the drill-down feature?
19. When using dynamic visibility, which is true? (Select all that apply)
20. What components and functions can be used to toggle dynamic visibility? (Select all that apply.)
21. On which property sheet can Dynamic Visibility be configured?
22. When testing your model you discover that the dynamic formatting in your Excel workbook does not appear in your published model. What should you do?
27. Which are the correct steps for setting up dynamic visibility?
28. Alerts can be enabled for the following components: (Select all that apply)
23. Which of the following are valid publishing formats for Xcelsius visualizations? (Select all that apply.)
24. Management has asked to see a snapshot of the data in the Excel workbook embedded in a published visualization. Of the methods below, which will produce a
spreadsheet that contains a snapshot of the data? (Select all that apply.)
25. Which of the following methods will produce an .XLS file that contains a copy of the data in the .XLF embedded Excel workbook? (Select all that apply.)

I'm busy with Photoshop basic course, I have a few multiple choice questions I struggle with

The following 2 questions, so far, I need help with:
1. Which tool creates a duplicate of a sampled area when you paint in another area?
A. Spot Healing Brush Tool
B. The Patch Tool
C. The Clone Stamp tool
D. The Healing Brush tool
2. Which of these tools do you use without sampling an image area first?
A. the Spot Healing Brush tool
B. the Patch tool
C. The Clone Stamp tool
D. The Healing Brush tool
My answers to them are:
1. C
2. A, D
Are my answers correct?
Thank you
Monya

Why don't you try and find out?

EJB multiple choice question

1)The run() method gets invoked when the thread's start() method is invoked.Once invoked, the run() method will execute until which of the following run() termination conditions occur?
A      The interrupt() method is called or run() terminates naturally.
B      An external event that causes the JVM to terminate occurs or run() exits.
C      Either run() terminates or the stop() method is called.
D      The suspend() method is called.
E      The end() method is called.
Answer :
2) What must accompany a variable definition in order to ensure that the variable is scoped locally?
A      Nothing, there is no way to scope JavaScript variables.
B      Local
C      Var
D      Nothing, variables are always scoped locally by default.
E      Script tags
Answer:
3) What is the simplest way to associate a BeanInfo class with a bean class called MyBean?
A      The bean must implement the java.beans.getBeanInfo() method, which returns a BeanInfo object.
B      Name the BeanInfo class MyBeanBeanInfo.
C      The bean should implement the HasBeanInfo marker interface.
D      Use the Introspector.setBeanInfoSearchPath() method to specify the BeanInfo class.
E      Name the BeanInfo class MyBeanInfo.
Answer:
4)What objects are used as keys to store and retrieve objects bound to HTTP sessions?
A      Any object.
B      Any object of type SessionKey.
C      The string name of the servlet.
D      Strings.
E      Any class that implements javax.servlet.Servlet.
Answer:
5)What is the SessionSynchronization interface used for?
A      It is used to guarantee that all access to the bean will be performed within a transaction.
B      It forces the developer to write code that interacts with the container's transaction processing.
C      It allows a stateless session bean to temporarily behave like a stateful session bean.
D      It synchronizes the method calls of a stateful session bean so they will be called synchronously instead of asynchronously.
E      It is used to store user's state information between accesses of the methods of a stateful session bean.
F      It allows a session bean to be notified of transactional boundaries by its container.
Answer:
6)How can a ejb get the security identity of the client invoking the bean's methods?
A      There is no way for the bean to determine the caller's identity.
B      Use the EJBContext's getCallerIdentity() method.
C      The bean must perform a lookup in the Access Control List using the client's primary ID.
D      The SessionGroup object keeps a Vector off all currently active clients and is accessible through the EJBContext interface.
E      Call the EJBObject's getClientIdentity() method.
F      The caller's identity is automatically passed to the EJB and is accessible through the getClient() method.
Answer:
7)How are the fields in a container managed entity bean mapped to the appropriate fields in the database?
A      The entity bean's fields must have the same name as the database's fields.
B      The container creates fields in the database automatically to match the field names of the bean.
C      The deployment descriptor of the container allows the developer to create the mapping.
D      The container performs a metadata lookup on the database and matches types and names to the entity bean.
E      The developer creates a java.util.Properties file with the name/value pairs to match the field names to the database.
F      It is not necessary to map the fields of a entity bean into a database.
Answer
8)The developer is creating container managed entity beans to map to records in a database. For this type of bean, what service(s) does the ejbCreate() method perform?
A      The ejbCreate() method restores passivated resources.
B      The ejbCreate() method creates a new bean instance.
C      The ejbCreate() method creates a new record in the database and returns it to the ejbHome object.
D      The ejbCreate() method initializes a bean instance and creates a new record in the database.
E      The ejbCreate() method returns true if a matching record can be found and an object instantiated or false otherwise.
F      The ejbCreate() method associates a pooled bean instance with a database record.
Answer:
9)Which types of beans can be pooled by the container?
A      Only Entity beans.
B      All beans can be pooled.
C      Only stateful session beans.
D      Only stateless session beans.
E      Any session bean that implements the "Poolable" interface.
F      Only Session beans.
Answer:
10) How can a servlet notify a client that a requested resource has moved to a different URL?
A      Throw a javax.servlet.UnavailableException.
B      Send a JavaScript code fragment to the client that loads the new location.
C      Throw a javax.servlet.ResourceMovedException.
D      Call HttpServletResponse.sendRedirect() with the URL of the new location.
E      Return -1 from the servlet service method.
Answer:

Hi Mr
This is not a certification questions. It doesn't matter whatever these questions are. Homework, certification, other.
It does not matter. Same advice applies.
i would like to check with my answers.But you haven't given any answers.

Adobe Captivate - Multiple Choice Quiz Question - Radio Button and Text Alignment

I have created a quiz with multiple choice questions.
No matter what I do I cannot align the radio button and the text for the choices (see below).
I would like to align the center of the radio button with the center of the letter A) and B).
I have tried every option that I can think of in the Properties options.
Please let me know if anyone has a solution for this.
Thank you

Thanks for the reply.
Previously I tried several different combinations of fonts and font sizes, but didn't see any change.
Does anyone else know of anything else that could effect this situation?

How to enter the following question as a multiple choice

Hi everyone,
I have the following question and a couple of limitations. Can you help me?
How do I do this?
Allocate the terms to the units
A
B
C
1
Heat Capacity
F
W
2
Heat Quantility
Q
Wh
3
Heat Current Density
q
W/m²
4
Heat Flow
F
J/s
5
Heat Energy
Q
J
Question: Which unit and which Welche Einheit und welches formula symbol label the term (A1 to A5 will be randomly shown) [multiple answers are possible]?
Answers: (B, C 1 to 5) are shown as Mulitple Choice
Assessment:
Question A1, correct Answer B,C 1 and 4
Question A2, correct Answer B,C 2 and 5
Question A3, correct Answer B,C 3
Question A4, correct Answer B,C 1 and 4
Question A5, correct Answer B,C 2 and 5
If the answer is wrong a text and a graphic has to be shown.
If not everything is possible here are the questions I am struggling with:
1) How do I script to show a graphic once the wrong caption is shown?
2) How can I script to find out which Multiple Choice item is selected (a number or alike, so that I can script to find out if a certain number combined with a certain term is combined?
3) How can I script something random (if random(4) == 1 then myVar="heat capacity")?
4) How do I combine an advanced action to an answer?
Thanks a lot
MR_TD

Hello again,
Certainly not yet an answer to all your questions, have been musing a little bit already but had to do some work for college too.
You could use the default Multiple Choice question slide, with possibility for more than one answer. Showing a correct and a incorrect caption is not a problem. But you also want to show a graphic after that, thus after the user clicks on the slide or enters Yes (normal way to continue). Can the graphic be on another slide? Than you could insert this slide immediately after the question slide and program that when the answer is correct the user jumps over this slide. If you report to a LMS, you could report everything, so that the answers will be visible on the LMS-report. This would be the easiest way. I do not see any solution (for the moment) to have the questions 'randomized'. Shuffling is possible on some question slides, but you want to shuffle the question slides themselves. Perhaps: create a pool with the question slides and get questions out of that pool, they will then automatically be unpredictible.
The other more complex way: create your own question slides with text captions, click boxes, advanced actions that populate some user variables. Do see possibilites, except again for the randomizing, the shuffling of the questions slides. Showing first a caption, then a graphic on the slide, based on the correct/incorrect answers is certainly possible. Storing the exact answers in user variables would be possible too: what do you exactly want to do with this 'knowledge'?
Perhaps I'll get some fresh ideas tomorrow,
Lilybiri

PDF Form: Multiple Choice sheet that displays a percentage based on answers provided

Hello,
Im trying to create a form that has 4 multiple choice questions, the answers to each being the values 0,1,2,3,4, 5 or N/A.
Once answers are given, I'd like the percentage to appear on the form.
I can't figure out how to do this, as the total fluctuates depending on if the response to one or more questions is "N/A".
I.e. if the answers were as follows: 4,4,4,4, the percentage would be 80% (16/20).
However, if the answers were: 4,4,4,N/A, the percentage would also be 80% (12/15) and NOT 60% (12/20).
I figure its a javascript thing - but alas I do not know Java.
Help Please!

So you want to compute the percentage of the non-"N/A" selections using the count of selected items * 5 as the denominator and then use that value to divide the sum of the values for the non-"N/A" selections.
Has a default checked value been selected.
Since the averaging is not just computation of the mean based on the item count, you to create a custom JavaScript calculation.
var aNames = new Array("Radio Button.0", "Radio Button.1", "Radio Button.2", "Radio Button.3"); // array of field names
var aValues = new Array();
var sum = 0;
var count = 0;
var oField;
event.value = "";
for(i = 0; i < aNames.length; i++) {
// get values of fields into array;
oField = this.getField(aNames[i]);
if(oField == null) app.alert("Error getting " + aNames[i] + " field!", 0, 1);
else aValues[aValues.length] = oField.value;
if(aValues.length != 0) {
// sum the non-N/A vlaues in the array;
for(i = 0; i < aValues.length; i++) {
if(String(aValues[i]).toUpperCase() != "N/A") {
sum += Number(aValues[i]); // sum the non-N/A values;
count++; // count the non-N/a values;
// compute average if count not zero;
if(count != 0) event.value = sum / (count * 5);

Multiple choice with multiple answers

Hello,
I was wondering if someone can help me out. I'm creating a series of tutorials useing Captivate and at the end of each one I want a slide that has the options
a) re-run tutorial (jump back about 100 slides)
b)go to next tutorial (next slide)
c)return to start (jump to slide 1)
I've had a look at the multiple choice questions in Captivate but they only seem to alow you to make one movement with a "correct" answer and I'm looking for more of a navigational tool. Would this functionality be stored under the 'Quiz' section or somewhere else or is this function just not available in this tool?
Thank you very much for your help,
Michelle

Hi there
Notice that with the Multiple Choice question type, when you select one of the possible answers you have an Advanced button that may be clicked. You may then assign a different action for each answer selected. So answer a could jump back 100 slides, answer b could open another project and answer c could perhaps open Google.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Change Multiple Choice Options from A, B, C to 1, 2, 3?

I am using Captivate 8.1. I need to create a multiple-choice quiz where the answer options are 1, 2, and 3 instead of A, B, and C. I can't find a setting anywhere that lets me change the "numbering" (for lack of a better term) format of the multiple-choice question. Does anyone know if it is possible to do this?

In Quiz Properties panel, at the top, just under Points and Penalty, you'll find Numbering with a dropdown list.
I think you are on 8.0.1.242, there is not a version 8.1

Adobe Captivate more than 15 multiple choice answers

Hi,
I am trying to create one slide multiple choice question.
My options in answers are 16 and from these 16 answers only 4 of them is correct.
Why Captivate doesn't allow me to have more than 15 multiple choice answers?
Thanks,
Shirin

Sorry, but the limit is 15. Even that is pretty much for a MCQ.

Five Multiple choice Questions

Similar Messages

Maybe you are looking for