Five version of BootCamp and @ still doesnt work?
Seriously, am I the only one thinking that it's kind of embarrassing that the @ still doesnt work properly in bootcamp. Or rather, that the AltGr doesnt seem to. Yes, I know there is input remapper, and I am using it, but I can't really understand how this still haven't been fixed. Or am i missing something?
/pJ
Hi,
AltGr is usually achieved with 'Control'+'Alt/Option'-key combo.
Stefan
Similar Messages
-
Have to keep resetting my password and still doesnt work to login
my macbook pro needs a new adobe reader update and every time i go to install it says to login so i do as normal and it always says my password is wrong. so i reset my password n still says wrong. i have changed my password 7 times and still doesnt work! it works to get on the website but not to log on my comp sometimes n to install. can any1 help me with this plzzz?
Are you sure your keyboard is working? Is the caps-lock key down? Are there any unusual characters in your password?
-
Latest version pf Keynote and still not working
When i try to open a Keynote presentation on dropbox i get the text: download the newest version of Keynote. I have the newest version... Now what?
About the latest version of Keynote and still not working
I double checked that I´m using Keynote version 6 to open my presentation and still can´t open it. I worked on the presentation for about 7 days using the latest version and from one day to other I´m getting this problem. Any suggestion? -
i have reinstalled itunes on my labtop 12 times and still gives me the same message that it wasnt installed correctly when i did it all correctly someone tell me why it isn't working propertly?
Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)
-
I have a new iphone 6 (64 Gb) that i have had for roughly 2 weeks. Last night i plugged in my charger that came in the box with the phone and plugged it into an outlet that is not used for anything else. My phone suddenly stopped charging and gave me the message that the accessory is not supported. The box of the charger seemed hot at the time. Thinking it was a faulty cord, i borrowed a friends charger today (also the original apple charger) and it would not charge and gave me the same message. I tried three more chargers and still no charge and i got the same message every single time. My phone is now dead and will not turn on. Can someone explain what is wrong? And if i am going to need a new phone and if warranty should cover it since it was not user caused damage
warranty will cover it. Did you try only by changing the power adapter or did you change both cable and power adapter?
if you did the latter, see this page: https://www.apple.com/support/iphone/repair/battery-power/
you'll be able to contact Apple Support from there. -
HT4367 I have done this but it says error after trying and still doesnt work on tv
I have tried to restore my apple tv by pluggin into computer, but after downloading software on itunes it still says error
What exactly is the error?
-
Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot
iOS: Forgotten passcode or device disabled after entering wrong passcode
-
I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?
Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default -
when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5
Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work, i have also searched for the usbappl or whatever it is and i cant find it, i have usbappl .dll but no .sys or .inf please help
All it is supposed to show up as in Windows is an image device.
If it's working fine in iTunes, what is the issue? -
my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing
It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249 -
i want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,
-
I dont know why this doesnt work now. I updated to 11.1.3 on my windows laptop. I followed all the steps on other posts but it still doesnt work... HELP!
Welcome to the Verizon family irishlass82! I know how important it is to stay in touch and we'll make sure that you don't regret your decision! Before trading in your device, did you turn off iMessage? In effort to correct this issue, text the word STOP to 48369.
AshleyS_VZW
Follow us on Twitter @VZWSupport -
HT4367 i restored my apple tv 3 and it still doesnt work
I restored my apple TV3 with itunes and says it was restored successfully, but it still doesnt work.
Welcome to the Apple Community.
What exactly doesn't work. -
hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom
Maybe you are looking for
-
In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail? I want to click on a mail and read this in the preview pane only without showing it as read.
-
After 3 years of happily using iTunes store all of a sudden I can no longer connect. There is no error message, the attempted connection just hangs. Why?
-
Help? (Terence or Old Toad) repost: album manual sorting
Just in the last week, my kids albums won't maintain the manual sorting I have done. It keeps putting several (not all) of the more recent pictures at the very beginning of the album (sorted in order since the day they were born ~1000 pics in each al
-
Ftp/networking with uverse
So back in June I had an issue with my ftp not being able to reach servers while on my home att uverse network. Archived here: http://discussions.apple.com/thread.jspa?threadID=2048726&tstart=180 After several weeks of restarting the att wireless rou
-
How to do CreateObje​ct as in VB
Dear all, I find vb can control LabelVIEW(it's a print software), you can get from :http://www.labelview.co.uk/labelviewpatches/LV_OLEsamples.zip In this project use CreateObject. How can tell me how can I do this in labview? Boone Attachments: 1.jp