Fix asset that is not amortized...........

Hi Expert,
As per client requirement, want to amortize the the fix asset. so, we would like to chagne depreciation key with LINR for for depreciation area 21.
You can see in below screenshot:-
But when we tried to change depreciation area, system show the following error log.-
Please request you to please send me the resolution on above regard.
Thanks & Regards
Raj Kumar

Then what is your question about the error message? It tells you exactly what is triggering the error and what to do to move past it. You could also probably search using the exact text of that error message and find the answer. I just searched and found 25 forums posts.
Diagnosis
    You have initiated a recalculation of asset values for fiscal year .
    However, fiscal year is still open is Asset Accounting, but not in
    Financial Accounting.
System Response
    Due to this inconsistency between the General Ledger and the the
    subsidiary ledger, processing is terminated.
Procedure
    Close fiscal year in Asset Accounting as well.

Similar Messages

The new update gave my ipne 4s many problems! now apple says i have to pay $150 to get it fixed? That is not fair!!! please help!

Since the update my iPhone 4s started freezing and restarting by itself! I have done everything apple have told me to do. I restarted my phone like new restarted settings etc. And still its giving me the same problems.
I don't believe I have to pay that amount of money because the reason for these issues is the update apple sent !!!!
Please help!

If you actually have an iPhone 4S, and 'Apple' referenced a $150 fee (assuming U.S. dollars), then that's not right. Apple only charges $19 USD for troubleshooting assistance. If the device cannot be fixed by troubleshooting and it needs to be replaced, then the out-of-warranty fee may apply. For iPhone 4 and older, that's $149. For iPhone 4S, that's $199. For iPhone 5, 5C or 5S, that's $269. For iPhone 6, that's $299. For iPhone 6 Plus, that's $329.
You have either inaccurate information from Apple, or you weren't talking to Apple. What phone number did you call to talk to 'Apple'.

Why "fix" things that are not broken?

I have been using Macs since day one and lots of Windows machines as well. And from day one it has always been the case that when you start up your browser it opens with your Homepage. Now, after all these years some genius at Apple has decided that should change. I am running Safari 5.1 under Snow Lepoard and when I start up Safari it will only come up in the Homepage IF I set "Open new windows with <homepage>". Fine, but that means that if I want to open a subsequent page it is always the Homepage and not, say, the same page. This did not used to be the case. The "Open new windows with" option only applied to new windows that were opened after Safari was already on some page, not at start up. This all gets even more complicated in Lion with the new Respond option in the System Preferences. Apple has developed this pattern lately of messing with these little things that work perfectly well. Then when they do not work as expected any more it causes folks a huge amount of frustration and negative energy. That is what WINDOWS is famous for and one of the biggest reasons we are all APPLE fans in the first place. PLEASE stop trying to turn into Microsoft!

Look at the top of the screen for your ipod.
Or click View Show>Sidebar to see it as before.

How do I fix keys that are not working?

Some of my keys are no longer working and I am wondering if it is possible to fix this without having to visit an apple store?
The keys are 8, F8, and –

reecejack wrote:
No spill, however I think it may have been caused by steam. I hope the vacuuming/blowing air works
Liquid damage (accidental damage) is not covered under Apple's standard 1 year warranty or Apple Care.
NOTE: If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with. They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
If you have Homeowners insurance, place a claim with them.

How can I manually delete an asset that will not go away

I have a sunBlade 6450 that was originally recognized by ops center 11 as solaris, we rebuilt the blade with Vmware Vsphere, and Opscenter still sees it as solaris..
No amount of highlighting the solaris or blade object and hitting delete will make it go away. I just want it to rediscover correctly. Is there a command line
option on the enterprise controller that will wipe this out?

do you have maintenance with oracle ? I was given some info that allows access directly to the java beans. you should contact a Oracle engineer as a Ops Center customer i don't feel comfortable sharing that info on this forum.

Transfer of a fixed asset to a WBS

Hello Everybody ,
I need your help.
A new scenario has come over here and i am not getting how to implement it in
SAP .
Scenario is :
1. We have a fixed asset at cost center .
2. Now the asset is need to be replaced .
3. We settled new asset at that cost center .
4. Old asset needs to be used in a project.
Problem is :
Client is required that old asset that was replaced, should be transferred to a new project or WBS where the asset final cost
(including depreciation) should consume the budget from the WBS .
Example:
Asset cost along with depreciation is say Rs 50000.
We transferred an Asset to a new WBS where budget is defined 80000.
So as asset gets transferred , remaining WBS budget value should be 80000 - 50000 = 30000 means old asset value should get expensed by WBS .
Then later on we can settle the asset along with the AUC of WBS.
Conclusion:
We need to transfer an fixed asset that is not in anymore used in that defined cost center and need to be replaced and after replacement it should get transferred to a WBS where WBS budget value would be reduced equal to asset value along with depreciation and later on we could transfer it to a cost center where asset is required.
Thanks,
Jagjeet Sandhu

Hi Sunil.
Thanks for your valuable response .
But issue is bit different
Scenario is :
We dont have to make asset as an scrap.
Ex:
We have to take the same asset to another WBS without making scrap and the current asset value should be expensed from the defined WBS budget .
How the asset at cost centre would be transferred to WBS and should be capitalised again at new WBS .
Kindly share the procedure .
Thanks & Regards

FIXED ASSET ERROR

I am using SBO8.81PL6. I am importing fixed asset master data and observing some strange behavior. When uploading fully depreciated assets, all assets are imported successfully but with the same capitalization and Depreciation start date of 30/11/99. This date is wrong. My template has different capitalization and Depreciation start dates for the different items and none of the date is 30/11/99. Import of assets that are not fully depreciated fails.
I have gone through the following link and all appear well done.http://How to import Fixed Asset Master File
Please help me resolve this issue.
George Njuguna

Hi Gordon,
Thanks, My date format was YYYY/MM/DD. I changed to YYYY-MM-DD and it worked.
Regards
George

Import fixed Asset

Dear All,8
I cannot import fixed asset to SAP Business One ( Hanna) PL8, the following message appear
The Remaining life of fixed asset for depreciation area GAAP is incorrect
how i can solve this issue ?
Regards,
Abdualla Fatayer

the formalla is :
remaining useful life = ( date of fixed asset that will be imported to SAP - starting depreciation date)\30 day.
and the result from this equation is subtracted from useful life of fixed asset.
note:
starting depreciation date =Dec 31 from the year that customer acqustion fixed asset.
example:
the capitalization date of an asset is 5/2/2012
I will consider starting depreciation date will be 31/12/2012
I will import the fixed asset on 1/1/2014
asset useful life is 80 Month.
then i will use the equation above to calculate remaining useful life
regards

Error 1628 when installing upgrade of Fixed assets

'Error 1628' Failed to installed is occuring when installing upgrade of Fixed assets to PL100.

Dear Lisa，
In order to try to resolve the issue, please do the following steps :-
1. Go to Start   > Run   > %temp%, then delete all the files present in
the temporary directory.
2. Then Reboot your machine.
3. Reinstall the FA addon as per following:
o Start SAP Business One. Log on to the appropriate company.
o Choose 'Administration' -> 'Add-ons' -> 'Add-on Administration'.
o Remove the add-on(s) from the company by marking them and
   clicking the left arrow button.
o Choose 'OK'.
o Close SAP Business One.
o In Microsoft Windows, choose 'Start' -> 'Control Panel' -> 'Add
   or Remove Programs'.
o Check if any SAP Business One add-on(s) are displayed in the
   list.
o If an add-on is included, uninstall it by choosing 'Remove'.
o Using Windows Explorer, locate to the add-ons installation
   folder. Depending on the different versions of SAP Business One,
   the default installation folder is 'C:\Program Files\SAP
   Manage\SAP Business One\AddOns\sap' or 'C:\Program Files\SAP\SAP
   Business One\AddOns\sap'.If you chose a different folder during
   the installation process, locate that folder. Delete all
   subfolders (folders named like the add-ons) and, if present, the
   "_common" folder (which contains the framework for add-ons).
o Locate to the SAP Business One installation folder. The default
   installation folder is 'C:\Program Files\SAP Manage\SAP Business
   One' or 'C:\Program Files\SAP\SAP Business One'. If you chose a
   different folder during the installation process, locate that
   folder.
o Open the following files : 'AddOnsInstall.sbo' and
   'AddOnsLocalRegistration.sbo' in Notepad and
   delete the imformation related to Fixed assets only,
    then save the file.
   Note: If you only installed fixed assets ,that means no other add-on installed ,you can completely Delete   the above files.
o Start SAP Business One.
o Log on to the appropriate company.
o Choose 'Administration' -> 'Add-ons' -> 'Add-on Administration'.
o Reassign the add-on(s) to the company.
o Choose 'OK'.
o Restart SAP Business One.
Hope it could be helpful.
Regards,
Eleven

ADI Fixed Asset Functionality w/ 10.7

Metalink tells me that all just about all versions of ADI are compatilbe with Oracle Financials 10.7 but I'm being told that only applies to its GL functionality. Is it true that the Fixed Asset functionality, specifically the Fixed Asset Upload does not work with Oracle Assets 10.7SC (prod 16.1)? If it's not, can you point me to some documentation?

ADI 7.1 is backward compatible with Release 10.7, 11, and 11i.
I don't know why the Upload Asset feature wouldn't work with 10SC...
You can get the ADI documentation from MetaLink for all versions of ADI (both Installation and User Guide).
Top Tech Docs > E-Business Suite:ERP > Applications Desktop Integrator > Documentation

Oracle Web ADI integrate with Fixed Asset

Dear All,
We are doing a test for integrating fixed asset - physical inventory with Oracle Web ADI. We have managed to define the layout and create mapping for Fixed Asset - Physical Inventory, but when it came to create document for fixed asset, it does not have Fixed Asset - Physical Inventory as the integrator in the list. Does anyone know how to add Fixed Asset - Physical Inventory into the list of integrator? If you know how to do it, may you please post me the steps to add it?
Thank you,
Daniel

If you need provisioning, your product is OIM. OAM
controls access to web applicationes. If you need to
provision different apps, and each one has its own
user repository, you will need to deploy an OIM
connector for each of them.I have done the integration of OIM 10.1.4.2 with Oracle Apps 11i and now consider on adding other standalone applications such web apps, discoverer to the system. Seems from your answer, we do not need OAM. We only want the accounts managed at the central OIM. Let me know if i am wrong.
Thanks

H.264 export without audio creates files that are not recognized in Quicktime or VLC

Dear all,
I need to generate h.264 files with video only. (short clips for use with a "clickable" catalog on an iPad)
Used the "H.264" category and chose a preset. Unchecked "Audio" so I only get the video exported.
The resulting .m4v file is not playable in Quicktime or VLC or MPEG streamclip.
When I leave audio enabled with the same preset, the file is fine, but as soon as I export without audio, the resulting file is unreadable.
Source material is ProRes 422HQ, audio+video, about 30-40 seconds long.
Any clues?
Carl.
Mac Pro 5,1
24GB RAM
Nvidia Quadro4000
4TB internal RAID0
OS 10.7.5
Premiere 6.0.2

Thanks Jeff, I did get that far ;-)
I'm sorry, probably my question wasn't very clear. Of course I can find some technical info about the iPad...
And of course some of the presets in Media Encoder provide basic starting points for encoding.
But... there is also the first iPad, I couldn't find the specs about it on the Apple site. On everymac.com I found:
Apple reports that the iPad supports "H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats."
So if I want to be compatible with all iPads I need to probably stay under 720p30 with [email protected] for H.264
When I look at
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC
I find (from the example values) that 1280x720@30p is quite near the maximum matrix size. So with 1024x576 I should be ok there. My bandwith of about 2Mbit is also well within range in this case. But what if I want to fill an iPod screen (1024x768) with the highest possible quality video? How do I calculate if this fits the max frame size requirements, where this is expressed in a number of luma samples and macroblocks? What is my max bandwith? The tables says that the "Max video bit rate for video coding layer (VCL) kbit/s" should be <14.000kbps. Does that directly translate to the sliders in my encoding app?
If you look in the table "AVC software implementations" (under Software encoder feature comparison) you can see that some features that are supported in MainConcept, and not supported in Qt. (8×8 vs. 4×4 transform adaptivity, Quantization scaling matrices, Separate Cb and Cr QP control, etc. What are these exactly?)
In Streamclip one can choose to have B-frames or not, in AME there is no such control. Does that mean it always encodes with B-frames? Why would one not want to have B-frames?
A lot of parameters in AME H.264 encoding seem to be set to certain fixed values that are not accessible to the user. Other programs (Sorensen, Telestream) provide the user with access to more parameters. Which parameters in AME are set to what (fixed, non-accessible) values and why?
As I said earlier, Quicktime reports different codecs for what should be the same format but from different encoders. Why? Is there a program that can analyze a H.264 stream and report about it in more detail than VLC/Quicktime?
etc. etc. etc....
If anyone could recommend an online resouce or a book to learn more about the ins and outs of H.264 encoding/decoding that would be great. I have the first edition of Charles Poynton's (brilliant!) book "Digital Video and HDTV", which does talk about MPEG-2 but not H.264. I saw that the second edition goes a bit more into detail about H.264. Does anyone have the second edition? Worth buying just for the relatively small addition about H.264?
Thanks.
Carl.

Fixed assets white paper

Hi All.
Do you know if there is a document on fixed assets that outlines the capablities. Something that a client can read as they might be interested in using it.
Thank you

You may find Fixed assets online help file on the Portal. Although it is more than the white paper, the first few chapters could match your need without problem.
Thanks,
Gordon

Tracking Fixed Assets between receipt and invoice processing

We have encountered an issue while using Oracle Fixed Assets that we are trying to solve. The issue involves asset tracking from the time of receipt until the invoice is processed and the asset record created and posted.
As you're probably aware, assets don't appear in FA until the invoice has been accounted and transferred to GL. We can have assets that are received and deployed before we even get the invoice for processing.
We need the ability to record and track where the asset has been deployed(Employee Name and asset Location) and to later update the appropriate asset records after they are created and posted in Oracle.
Right now we are doing this manually which means someone is entering data twice for the same thing. Has anyone come up with a workaround to cover this gap between asset receipt and asset creation?
TIA
Ken

Hi,
I see this is a very old post but did you find a solution? I am keen to learn more about this.
Mike

Distribute ans settle a fix asset

Hello,
is it possible to make a distribute (AIAB) and Settle (AIBU) of a fix asset that has a transfer within company code (ABUMN) from another fix asset?
Thanks

Sorry , I didnt explained it correctly in the first e-mail,
actually it is an AUC that received another transfer to an auc . And now, i need to distribute or settle it to a final asset.
And apperar the error " Acquisition value negative in area 01."
Message no. AA617
Thanks

Fix asset that is not amortized...........

Similar Messages

Maybe you are looking for