Fix Assets Mass Update

FI Gurus,
I will be changing the "Inventory Number Field" under the general tab in tcode AS02. How can I do this on a mass update?
Thanks for the help

Frank,
When you run a report you can save the assets in a Worklist (in the report)
Fixed Assets / Environment / Worklist
AR01 - Generate worklist select there the button WL.
When you have you asset numbers in EXCEL you can run the report and copy the asset numbers in the field asset numbers.
By case you can create a worklist.
When you found this to difficult you create to an LSMW for it

Similar Messages

BDC Fixed Assets mass change

Hi Everybody!
I would like to enquire about how to edit a recording for a specific transaction.
I need to make a mass change for hundreds of fixed assets ( e.g. cost center / responsible cost center ) in SAP. In our old system version we had a t-code for this mass change called ZAMASS01. Point is, I cannot use it in the new SAP version so I have to upload this data via BDC manually,
I have tried to record the transaction ( AS02 ) in SHDB but after I saved the recording and tried to Edit it.
Apparently I do not have access for further actions. All I did was to export the .txt file but it's useless.
Can someone help me generate the BDC file?
Thank you in advance!

In Oracle FA Descriptive flexfield information will be copied only if assets are being reclassified within the same major category. The descriptive flexfields should be set up with the same segments in both the old and the new category. Otherwise, descriptive flexfield information in the old category may be copied incorrectly into an incorrect segment in the new category. If a segment in the old category and a corresponding segment in the new category have different formats (for example, segment 1 in the old category is alphanumeric and segment 1 in the new category is in date format), the information will be copied, but you will need to correct the descriptive information in that segment.

Fixed Assets Mass Reclassification

I would like to know if there is a way of using the Mass Reclassification process in Fixed Assets (E-business Suite 11.5) to move assets between major categories without losing the information stored in the DFF's
There is an option to tick 'Copy Category Descriptive Flexfield to New Category' but that only allows you to use it when you are staying within the same Major Category.
Any info would be appreciated..
Thanks

In Oracle FA Descriptive flexfield information will be copied only if assets are being reclassified within the same major category. The descriptive flexfields should be set up with the same segments in both the old and the new category. Otherwise, descriptive flexfield information in the old category may be copied incorrectly into an incorrect segment in the new category. If a segment in the old category and a corresponding segment in the new category have different formats (for example, segment 1 in the old category is alphanumeric and segment 1 in the new category is in date format), the information will be copied, but you will need to correct the descriptive information in that segment.

Fixed Assets Mass Addition

Hi,
We have the below requirement in 11i:
When there is a mass addition, there should be an option to assign accounting code combinations at a category or setup level so that it defaults to all items on a divisional accounting basis. This is to enable divisional accounting for Balance Sheet and Depreciation (Profit & Loss).
Is this possible using standard functionality?
thanks.
S.Sriram

Hi
I am using Solution beacon vision instance and have tried entering an asset using mass additions and below are my observations:
I entered the Asset book, Transaction date, asset category, number of units and than clicked on the Assignments button and entered the Expense Account and Location.
For the expense acount the system is automatically defaulting the following:
Company Segment Value - 01 as company value (since the default value has been set at the Key Flexfields segments window)
Account Segment Value - Depreciation expense account (This value is being defaulted from the Asset category window based on the Category setup)
Sub-Account - Defaulted as 0000 (since the default value has been set at the Key Flexfields segments window)
Product - Defaulted as 0000 (since the default value has been set at the Key Flexfields segments window)
The system is prompting me to enter the value for the department segment as it is not automatically defaulted. (No Default value has been set at the Key flexfields segments window)
I didnt find a place where in i can see the asset clearing account or cip clearing account was being asked or used while creating mass additions.
When the asset is being brought from other module such as Payables, than the Asset clearing account or CIP Clearing account would have been entered at the Invoice distributions level and that is being brought into the Mass additions window and is displayed in the source tab screen.
But apart from the above i have not been able to find a tab/field wherein system asks or prompt me to enter the other accounts as mentioned by you.
Based on the above, do you find any difference of what you might be seeing or the accounts being defaulted.
Thanks and Regards
Manish Jain.

GL Journal entry looks good but not Fixed Assets in 11.5.10.2.0 -

In the GL Journal entry it looks perfect, but not in FIXED ASSETS
This is on 11.5.10.2.0
Depreciation amount is not correct in Fixed assets and Any thoughts on that or please let us know how to go about
In the Form
Depreciation
Period
Jan-12
expenses 651.94000.89..whateer
Deprectiaon should be 442.00 whereas it is showing different number
whereas it does show properly in GL Journal entry
How to get this value transferred or migrated
GL looks good but not in Fixed assets- Is there a process we can review or
find more information on it

Hi,
I am pasting my comments next to yours :
These are the issues that needs to be resolved:
• Depreciated balance are over stated in Fixed Assets and needs to be adjusted to reflect what is in GL. => I wasn't sure how this was was possible, since I assumed that your Asset depreciation journals in GL were being fed from FA. So if depreciation was thought to be incorrect in FA, its corresponding balance in GL should've been incorrect as well. But I guess that's not the case because your other questions imply that some of these assets were acquired and their might have been some conversion activity involved.
• Fixed Assets mass additions are selecting GL accounts that should not be selected. We need to know how to change the criteria for selection. +=> Check the Asset Clearing and CIP clearing accounts on your asset categories+
Later:
• We need to learn the proper way to convert assets we acquired from acquisition into our Oracle Fixed Assets system, so that depreciation start at the time we acquire the assets. => That is correct, you could change your original date placed in service to the acquisition date as part of conversion and if you have the correct prorate convention, they should depreciate the way you want it to.

Is there any API to update Fixed Asset minor category ?

Hi,
My client need to update the minor category of 3000 Assets.
Is there any API to mass update Fixed Asset minor category ?
Thanks,
Joe

Hi Joe,
You could use the reclass API : FA_RECLASS_PUB.DO_RECLASS
Based on the new minor category, derive the correct asset category and pass it to this API along with other required parameters.
Regards,
Mukul

Mass transfer for AUC to Fixed assets

Hi,
I would like to do a mass transfer from AUC assets to fixed assets. 900 new fixed assets have been created. However, the AUC settlement to 900 assets are very tedious. Are there any batch processing available for this ?
Or can I use via LSMW ?
Thanks.
Angel.

Hi,
Prepare an excel sheet with columns as shown in the settlement rules screen and then paste it into settle rules screen.
I hope this can be done.
Thanks,
Srinu

How to calculatee Dep manually and how to update fixed assets register

Hi Gurus,
I have a issue like Asset vale is Rs. 1000 Dep % is 1st year 35% 2nd year 15%3rd year 15% 4th year35% for 4 years .if buys another asset in addtion to old asset Rs.500 the depreciation is same has earlie said percentage . my clients wants to post this depreciation manually.and how to update fixed assets register.
Regards,
Ssriram.

Hi
Depreciation terms are applicable to the entire asset (not for individual transactions). If you want to have different terms, you may create the additions as Sub-asset (Tcode AS11) to the main asset and enter depreciation terms.
Thanks
Palani

Is there any way to rollback mass changes in Oracle 11i Fixed Assets?

Hi there,
We are currently undergoing a massive change in assets depreciation rate with amortization date starting from 01-jan-13. To achieve this we decided to use MassTransactions -> Changes in Oracle Fixed Assets.
There is a preview available, which shows the results on the assets that are affected as well as the changes that we have decided to make. On the other hand, the preview does not consider the accounting results of the change so there is no way to see how the depreciation is affected.
However, someone could see the results using the what-if analysis, but in that case there is no option to use the amortization date in order to see the changes that the adjustment will create.
The only way we could really see the final results is to perform the mass change and then do a test depreciation and see the results. But in case where something is not acceptable by us, is there ANY way to rollback/undo the mass changes we did in the specific period?
If there is no way to do this from the UI, is there any other from the db? ( I know that messing with assets is like playing with fire )
Thanks and Regards,
George

Hi, You may find this thread helpful : How to compare two oracle database schemas
Regards,
Himansu Mallick

Problems with Mass Changes of fixed assets (Transaction AR31)

Hello all,
I have the next problem: I am trying to make a massive update of fixed assets , by means of the transaction ar31, but the system goes directly to the transaction so01 .
That I must do for being able to execute the transaction of normal way?
Thanks.

I think the same, but I don't understand :
<i>for a simple change better use BDC to tcode AS02.
-> you can use transaction-recorder SHDB</i>
I was investigating and I managed to deactivate wf, now I can execute the transaction, but not successful. The system show the next message " They do not exist responsible for task " and when checking the customizing the fixed assets (OAWF) the task have a responsible.
So I do not know that to do.
I hope you can help me

Purchase Order and Fixed Asset Module.

Hi all,
I want to print my purchase order of fixed asset for record purposes. But the thing, I can't link purchase order or any of A/P documents to my fixed asset.
Meaning, if A/P invoice has been added into the system, it will not update my fixed asset master data.
Therefore, I have to use PO for printing, since there's no way to print Fixed Acquisition as a document. By doing this, i need to maintain both Item Master Data and Fixed Asset Master Data with Fixed Asset items, which i find tedious.
Is there a solution for this, like perhaps there's a way to copy info from PO to FA acquisition, or Posted A/P Invoice that contains Fixed Asset item will be linked to FA Acquisition, or perhaps there's a way to print FA Acquisition (like a PLD) that i am not aware of?
Please do help.
Thanks upfront!
Rgrds,
Kevin
Edited by: Kevin Lau Sieh Huo on May 20, 2008 7:25 AM

Hi Kevin,
I am afraid to inform you that the print layout function is not
supported for Fixed asset transactions such as acquisition.
As you mentioned, if you want to use it as PO document, you will need to create PO in business one since no integration is realized between Purchasing in business one and acquisition in Fixed asset addon.
If you think this will have critical impact on your business process, please post your requirement in our SAP Business One Product Development Collaboration.
/community [original link is broken]
Please refer to SAP Note 1028874
https://service.sap.com/sap/support/notes/1028874
Regards,
Ivy Zhang
SAP Business One Forums Team

Fixed Asset year-end Closing

Hi!
We are about to execute Fixed Asset Closing (trans code AJAB), which is a pre-requisite before closing FI. What FI closing is this? Is it the trans code S_ALR_87003642 (Open and Close Posting periods) or the F.16 (Balance Carry Forward)?
Also, FI-AA module allows two fiscal years being open. We are following the Fiscal Calendar period being Dec 2006 is our last month period for year 2006. We are now in new Fiscal Year 2007. Is this means that is it okey not to close Fiscal Year 2006?
Thanks for your inputs.
Roberto

Hi Robert,
AJAB closes the year in the sub-module and prevents postings with assets in it. Also, changes in the depreciation keys and useful lives of the asset doesn't touch posted depreciation in closed year. You have to close the year in the sub-module (AA) before closing it in FI.
You have to close the FI periods in S_ALR_87003642 separately for asset accounts (type A). However, if you close with AJAB, you cannot update asset accounts for closed year as you cannot post with any asset in it.
Transaction code AJRW in AA is analogous to F.16 in FI.
Yes, you may not close 2006 yet as the current year is 2007. But you have to close 2005 already, if you have not done it yet.
Regards, Lyubomir

Fixed asset Add on- Write Up

Dear All,
Anyone knows how we can write up values for fixed asset. Appreciation of fixed asset
Thanks
Kentish

in the Value tab of Fixed Asset Master data, you have row indicating Write Up. If you do an acquisition on an existing fixed assets, this row does not get updated but system will increase the acquisition row.,
Anyone knows how the write up row can be used
Thanks
Kentish

New user to Oracle 11i who needs help on creation of new fixed asset class

Hi all,
I am new to my Company who is using Oracle 11i. And the Company has a new class of fixed asset and a GL code has been created. But there is no link between the Fixed Asset Manager and the GL code, i.e. depreciation is not linked, additions are not captured into "Cost register", no asset number was assigned in Oracle. Please help.
Thanks,
Simon

Hi.
No, Simon, it does not work that way.
First, be sure that the distribution line has the flag "Track as Asset" checked.
Second, the GL Account to be used on the distribution line must be the one defined, in the FA Asset Category, as the Asset Clearing Account.
In FA, navigate to /Setup/Asset System/Asset Categories. Following, query a Category. There you can see which account has been used as the Asset Clearing Account.
You can use as many Asset Clearing accounts as you which, but normally, all Categories share the same account.
Now reverse the distribution line and cretae a new one with the correct account. Post it, run the Mass Additions Process and you will see the that the addition was created.
Hope this helps.
Octavio

Material Account Assignment Group, in Sales Order Mass Update

Sd Experts,
We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
Your help will be greatly appreciated.

Hi
In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
Hope this is clear,please do a test run before.
Regards
Chandra

Fix Assets Mass Update

Similar Messages

Maybe you are looking for