Fix Colulm Width in analysis item WAD 2004s BI 7.0

Hin guys,
I have tried everything but can't find a way to fix certain columns of an analysis item.
The system automatically defines the column width on base of the maximum length for all values in a column.
But I want to fix or change the column width.
Do you know a solution for this ?
Thanks !
regards
Paul

Hi Vivek,
have a look at SAP Online Help: [http://help.sap.com/saphelp_nw2004s/helpdata/en/47/a0623a12753377e10000000a421937/content.htm].
You may also try the note below.
[https://service.sap.com/sap/support/notes/1118502]
Best regards,
Sebastian

Similar Messages

How to set dynamic column width for analysis item

Dear Experts,
I have a query view which is added in the web template as an analysis item. The web item properties on width is not working - I tried entering a value in the width but when I execute the template, the query view's width still stays the same.
Module com.sap.ip.bi.rig.ColumnWidth don't seem correct because I don't want the column width to be static. As my number of columns may change, I wanted the overall width of my query view to stay the same.
Appreciate any ideas which can solve this issue
Thanks and Regards,
huimin
BW newbie

Hi Huimin,
I don't think it is possible to fix the width of the Analysis webitem since it dynamically adjusts its width based on the text maxlength within its cells. Unless you use com.sap.ip.bi.rig.ColumnWidth where the cols are static, you cannot achieve this.
Even if you do override the css settings using a cell padding or something, the portal settings would override the same. How about using a Report webitem to insert tables/charts & check if the width can be adjusted here - just a thought.
--Priya

Need Calendar Year as a Variable in the Caption of an Analysis Item WAD 7

I am using Web Application Designer 7.X for the first time.
I am modifying a template that has the following Analysis Item in it:
           <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                <bi:WIDTH value="966" />
                <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                    <bi:TRAY_SETTINGS type="COMPOSITE" >
                        <bi:CAPTION value="Employee Information" >
                            <bi:text localkey="1" />
                        </bi:CAPTION>
                        <bi:CAPTION_VISIBLE value="X" />
                    </bi:TRAY_SETTINGS>
                </bi:WITH_TRAY>
                <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
                <bi:LINKED_DATA_PROVIDER_REF_LIST type="ORDEREDLIST" />
                <bi:ROW_HEADER_VISIBLE value="X" />
            </bi:ANALYSIS_ITEM>
The Caption of the table is currently set to "Employee Information". I need the Caption of the table to say "2007 Employee Information" where the year is the previous year. In other words, if the web application is executed in 2008, the title would say "2007 Employee Information". If the web application is executed in 2009, the tilte would say "2008 Employee Information".
I am very new to BW and WAD so a detailed explanation would be greatly appreciated.
Points will be awarded.

I am trying to change the caption of the Analysis Item using Javascript, but the caption is showing up blank. This is my first attempt at writing Javascript so a detailed answer would be greatly appreciated.
I would like the caption to read "HR Data 2007" if the function is called in 2008. I would like the caption to read "HR Data 2008" if the function is called in 2009. So always use the previous year in the caption.
I took the following steps:
1. In Web Application Designer, I created a Script item in my Web template.
2. I created the function executeJS_SET_ITEM_PARAMTERS_R using the Script Editing Wizard.
3. I made modifications to the function to add the year into the caption.
4. I modified the XHTML by adding the function to the body onload. I am not sure if I need to do this part or if my syntax is correct here. I can't post how I formatted the body onload because this causes 500 errors when I try to post the message.
Here is the part of the function that I modified using the Script Editing Wizard.
                // Create parameter CAPTION
                var d = new Date();
                d.getFullYear();
                var newCaption = "HR Data " + d;
     var paramCAPTION = new sapbi_Parameter( "CAPTION", newCaption );
     paramListTRAY_SETTINGS.addParameter( paramCAPTION );
     // End parameter CAPTION!
Here is the XHTML for the Analysis Item showing that the caption is set to be visible.:
           <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                <bi:WIDTH value="966" />
                <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                    <bi:TRAY_SETTINGS type="COMPOSITE" >
                        <bi:CAPTION />
                        <bi:CAPTION_VISIBLE value="X" />
                    </bi:TRAY_SETTINGS>
                </bi:WITH_TRAY>
                <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
            </bi:ANALYSIS_ITEM>
Here is the XHTML for the Script Item:
            <bi:SCRIPT_ITEM name="SCRIPT_ITEM_1" designwidth="300" designheight="70" >
                <bi:SCRIPT_CONTENT_TYPE_LIST value="JAVASCRIPT" />
                <bi:SCRIPT value="biLargeData:9CG1G0CWFS76DYKR0YY9GYHEM" />
            </bi:SCRIPT_ITEM>
Edited by: Karen Thompson on Apr 10, 2008 5:34 PM
Edited by: Karen Thompson on Apr 11, 2008 6:21 PM

Table (analysis item) Width - In WAD

Hi All,
has someone been able to change the width of the analysis item in WAD? I do whatever I can and the table width is still the same..
I particulary want to use full_width parametr.... so using module com.sap.ip.bi.rig.ColumnWidth is not really solution for me....
Am I missing something, or is that a bug?
Many thanks for any hints!!!
Regards
Pavel

Hi Priya,
thanks for answer.... The table seems OK, so everthing is displayed correctly.... see pics
[http://www.screencast.com/users/pavel.rais/folders/SAP/media/9da56465-4a54-4589-8674-ba05f1456cba]
But when I change width of table or chech full_width parameter, it stays the same and I need it to be broader....
(I am using structers in my reports... so not sure if Paging could change something, I tried to change all the parameters anyway, but without any results....:-))
Any Ideas?
Thanks!
Pavel

PDF Export with fixed column widths ignores page break on Analysis item

Hi experts,
we use the column width modification to define fixed column width in a analysis item. On the same Web template we want to export the whole template including the analysis item to PDF format. First of all everything worked properly, but the fixed widths have not been applied to the PDF. According to [SAP Support Note 1336188|https://service.sap.com/sap/support/notes/1336188] and additional explainations from [SDN Thread 1558536|Column Width Modification not working in Print Version; we solved the problem.
Unfortunately another problem arises. Our Analysis item delivers a big number of rows which extent multiple pages. By applying the export fix width parameter all page breaks are ignored, meaning that the analysis item is never shown completely in the PDF. We tried all parameter options of the Export Function without success. It seems that the EXPORT_FIX_WIDTH is just working for analysis items, which fit on one single page by length.
Any ideas how to solve this?
FYI, our XHTML code (Version SAP BW 7.0 SP 19):
<bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1">
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:MODIFICATION type="CHOICE" value="MOD_SINGLE_MODULE" >
<bi:MOD_SINGLE_MODULE type="COMPOSITE" index="1" >
<bi:ACTIVE value="X" />
<bi:MOD_SELECT type="CHOICE" value="MOD_GENERIC_MODULE" >
<bi:MOD_GENERIC_MODULE type="COMPOSITE" >
<bi:MOD_REFERENCE value="com.sap.ip.bi.rig.ColumnWidth" />
<bi:MOD_PARAMETER_LIST type="ORDEREDLIST" >
    <bi:MOD_PARAMETER type="COMPOSITE" index="1" >
      <bi:MOD_PARAM_NAME value="COLUMN_DEFAULT" />
      <bi:MOD_PARAM_VALUE type="CHOICE" value="INTEGER" >
        <bi:INTEGER value="50" />
      </bi:MOD_PARAM_VALUE>
    </bi:MOD_PARAMETER>
    <bi:MOD_PARAMETER type="COMPOSITE" index="2" >
      <bi:MOD_PARAM_NAME value="EXPORT_FIX_WIDTH" />
      <bi:MOD_PARAM_VALUE type="CHOICE" value="BOOLEAN" >
        <bi:BOOLEAN value="X" />
      </bi:MOD_PARAM_VALUE>
    </bi:MOD_PARAMETER>
</bi:MOD_PARAMETER_LIST>
</bi:MOD_GENERIC_MODULE>
</bi:MOD_SELECT>
</bi:MOD_SINGLE_MODULE>
</bi:MODIFICATION>
</bi:ANALYSIS_ITEM>
Any help and comments will be appreciated. Thank you!
Best regards,
Sebastian

Thank you!
Unfortunately I didn't find any work around.
Thanks,
Federico

WAD 2004s Analysis Item Row Select RRI_RECEIVER does not pass Filter values

I have created an Analysis item and using a Data Provider that has a Sender-Reciever entry for it. I created a Command on the Row Selection Activation that does an Report to Report (RRI) jump to another web page(template or app whatever sap calls it). When running the page, it performs the jump to the other page, but does not filter the page on the selected hierarchy value on the original page.
Why does this not work?
If I do the same thing by selecting the Goto from the context menu on the cell it works fine.

Answering my own question here....
This was solved by applying the patch mentioned in Note 1115027.

WAD Analysis Item not displaying results

Hi
I have a very simple web template, containing a dropdown, an analysis item and the last refreshed date of my query.
The dropdown displays the characteristics properly but the analysis item only shows the query columns headers not the data and a line "overall results", it's displaying only these two lines.
I used WAD 3.x before and the table item displayed this query results properly.
Is there some setting that has to be changed to display the data?
Am I using the right item, the analysis item ?
Any help is appreciated.
Thank you,

Hi Andrea,
You have mentioned being on NW 7 EhP1 with SP 6 and patch 10. The SAP note clearly states that the correction is only available as part of a higher SP or patch which is either upgrading to "Support Package 07 for SAP NW BI7.0 EhP 1 BI JAVA" OR "Importing BI JAVA Patch SP06 #20 (Support Package 06, Patch level 20) for SAP EHP1 for NetWeaver 7.0 (7.01) BI JAVA into your BI-System".
--Priya

Want to count the number of rows of analysis item in WAD Template

HI all,
Detail Description:
In my WAD report, i have a Export to Excel Option. But I want when I click on this button, one pop up will come only if no of rows of the Analysis Item is Greater than 10,000 ask for Do you want to proceed or not.
Means 1st i want to count the no of rows in the Analysis Item, after that it will check, if the no of rows is greater that 10,000. then the pop up will come.
Question:
Does anyone know, "how to count the no of rows of the analysis Item ?" . It will be better if you know you to implement this with the help of java script.
Means there must be some varible, which counts the no of rows. If you know then please help me

Hi,
Please find the below link which helps you to get solution of your question.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0bbb20f-2d7e-2e10-258f-8655daa41fab?QuickLink=index&overridelayout=true
It is mainly used to automate queries, web templates, and reports in different output formats like PDF, Excel,
XML, XHTML, and HTML
How to see WAD reports on browser:
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
Regards
Sudheer

WAD-Analysis Item-Poor performance for new lines

Hi.
I use WAD7 for entering new records in IP.
According to our business requirements, in analysis item properties I have defined "Number of New Lines in Planning Queries" = 50.
After that I face before extremely poor performance - it takes about 1-2 minutes until the page has loaded (note that it is empty page - only new blank rows).
When I define new lines = 1 performance is very good (2-3 sec).
Does anybody know what could be the problem ?
Thanks.

Hello Andrey,
the number of new lines configured in WAD is completely unknown in the ABAP backend and has no impact on backend performance; in fact, the front end gets information about one 'line' of template cells, this costs nothing.
Checks for characteristic relationships etc. only may have significant costs for cells of the result set, not for new lines.
Whether this problem comes from the ABAP backed or form the Java stack or from the browser rendering can be checked
with an RSTT trace. Is the run time of the trace different between 1 or 50 new lines, were different backend calls recorded?
If not, the problem comes from the Java stack or from the browser rendering. One can check the latter via task manager.
To check (partially) the run time in Java and/or ABAP stack add the parameter &PROFILING=X in the url, cf. note 1048691.
Regards,
Gregor

How to fix the column header width in BEx or WAD

hi there!
how to fix the column header width in BEx or WAD. because, depends on the column data, the column size varies. i want to fix the size so that i can maintain the consistency through out the report.
thanks!
Vam.

Dear Vam,
you can easily do that with css, search the source code of the executed web template for the td tag which is around your coloumn header, remember the style sheet class name it is ´displayed as class= in the td tag.
Now you can add this code the beginning of your web template:
</style>
This will only work in Web.
Regards
Marcus

Analysis Item option to "generate caption"

Hello,
Is there a way in WAD 2004s to have an Analysis Item "generate caption" with the query description as we had in the older 3.5 version?
Best Regards,
Sanjiv

Hello,
Is there a way in WAD 2004s to have an Analysis Item "generate caption" with the query description as we had in the older 3.5 version?
Best Regards,
Sanjiv

Sales Analysis Item Tab Function Not Showing Orders Dollars

Hello Gurus of SAP B1.
This pertains to SAP B1 SP 00 PL 16 Version 8.8.
While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
Does anyone know why this might be happening and/or how to fix this???
Thanks in Advnace - Zal

Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting. My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also. I am certain I have done it before in SAP 2007A...
Has there been a change to the item/sales order table in Version 8.8???
Take care my FFF - Zal

Sales Analysis Item Tab Displays Zero Dollars for "Orders"

This pertains to SAP B1 SP 00 PL 16 Version 8.8.
While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab??? Strange that a button would be displayed which does not work...
Does anyone know why this might be happening and/or how to fix this???
Does SAP plan on fixing this in any upcoming patch levels???
Regards - Zal
Responses received from SAP B1 Core Forum:
Sales Analysis Item Tab Function Not Showing Orders Dollars

Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting. My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also. I am certain I have done it before in SAP 2007A...
Has there been a change to the item/sales order table in Version 8.8???
Take care my FFF - Zal

Is it possible to have a fixed column width and a URL link?

I am trying to achieve having a popup link on a column within a SQL report but also have the report column a certain width. I can have either or however not at the same time.
What I did was created a SQL report, edited a column and gave it a URL redirect (page in application) as normal.
For the fixed column width, I used:
<div style="width:250px; height:54px; overflow:hidden" title="#Comments#">#Comments#</div>On Column Formatting / HTML Expression
And for the popup URL, I used:
onclick="window.open(this.href,'_blank','resizable=0,scrollbars=0,width=650,height=300,menubar=0,location=0');return false;" title="Comments"On the Column Link / Link Attributes

Andy thank you for your reply, however I either am not completly understanding or there is a problem elsewhere.
I have changed to the code to fit the needs of the application as so:
!http://i41.tinypic.com/2m6mrh4.jpg!
App ID: 523
Page: 23
Item: P23_STATUS_COMMENT
Column to select: Comments
Whenever clicking on the link, the following error is given:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().{code}

Add caption to Analysis item in WAD7

Hi,
I used to add caption in WAD 3.x version, how ever, I am not able to find a similar option in WAD 7. Can any one tell me how I can do this in 7.x
Thanks

Hello Tanu,
If you can enable the 'With Tray' option for the Analysis Item, you will be able to provide caption to your Analysis item.
Regards,
Pratap Sone

Fix Colulm Width in analysis item WAD 2004s BI 7.0

Similar Messages

Maybe you are looking for