Fix corrupted Nikon D3s files in FCPX

Shooting video on a Nikon D3s and there always seems to be one or two corrupted files in each video folder.
Video is there, but the small icon is a QT logo instead of a video thumbnail like all the others. These files cannot be imported.
In the past, the fix was to trim the last frame off the video file using the in-camera editor, save as a new file, then it will work.
Problem is, the cards were re-formatted long ago. Tried simply placing the video file on a card and putting that card in the camera, but the camera sees it as a blank card.
Is there a way to:
Get these video files back on a card that the camera will recognize, or...
Somehow fix the corrupted files in the computer?

No, they just have the red panes indicating that the projects are not linked to their source media.
After reviewing the White Paper on updating to 10.1 (something I should have done before updating) I think I can update my backup version then move the (hopefully) uncorrupted events over. In the end, these are old events that I already have edited and published, so it's not that big of a deal.
Steve

Similar Messages

Lightroom 2 won't import Nikon D3s files

I work with Photoshop CS4 and have upgraded the camera RAW to v5.7 in order that Nikon D3s files can be used, but Lightroom 2 doesn't seem to be able to import these NEF files. Where can I update Camera Raw in Lightroom and how do I do this exactly?
Thank you

Thanks; I ordered the upgrade.
Tony
Date: Sat, 11 Dec 2010 15:06:11 -0700
From: [email protected]
To: [email protected]
Subject: Lightroom 2 won't import Nikon D3s files
The A33 isn't supported until LR 3.2. So, if you posted to this thread because you are using LR 2, then that's your problem.
>

How can i fix corrupted logins.json file ?

Hello. My computer had crashed. So i installed another windows on crashed C drive
Later i copied my entire profile folder to another drive and reinstalled windows clean
Now i copied back my entire firefox folder
Everything works however firefox can't see any passwords. It creates are file logins.json.corrupt
When i check file with notepad++ i can see saved password sites etc.
So maybe only small part of it is corrupted however i don't know how to fix
How can i fix it ? It is extremely important for me
At least save the working part of the file

Firefox 32 and later builds store the passwords in the logins.json file in the profile folder and no longer use the signons.sqlite file. You can force Firefox to reimport the passwords from the signons.sqlite file.
• reset the '''signon.importedFromSqlite''' pref on the '''about:config''' page to the default value via the right-click context menu
• delete the '''logins.json''' file in the Firefox profile folder with Firefox closed
When you restart Firefox then you should have the '''signon.importedFromSqlite''' pref with the value set to true and you should have the passwords imported in the Password Manager unless there may have been errors.
You can use this button to go to the currently used Firefox profile folder:
Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Nikon D3s file orientation in Bridge cs4

I have noted that the correct orientation of D3s nef files is occasionally ignored or randomly re-assigned in front of my eyes in Bridge essentials

Ronald Keller - thank you. I am practically in tears laughing about how something so completely simple has had me fretting for days. Could it be my over 60 mind has completely failed me now, or is it I am just a bit rusty on using my software? Anyway, thank you for taking the time to offer up this response!

HT201070 Why does this update corrupt Nikon NEF files?

Per earlier discussions, I reinstalled 4.07 and rebuilt everything. It appears that both Nikon D90 and D7000 Nef's are affected yielding a magenta screen when the thumbnail is clicked and opens in any window.
Will the next RAW update remedy this problem?
I am using a new iMac and it came with Mountain Lion and all updates have always been installed.
Please advise.

What for Apple to issue a fix for this. Until then keep using Raw Camera bundle 4.07
Message was edited by: Frank Caggiano - Just as a data point how are you importing from the camera? What software are you using?

Any way to fix a corrupted CurrentVersion.fcpproject file?

I was editing a project and FCPX crashed. So I closed it out and tried reopening. It kept crashing on "Loading Compressor Support". The error report states that only Thread 0 is crashing. I've pasted the relevent parts of the error report in case someone wants to read it over but it seems many other have already done that in other threads.
Anyhow, I have narrowed the problem down to the "CurrentVersion.fcpproject" file is corrupted in the Project I was working on when FCPX crashed out. If you go to your Final Cut Projects > YOUR EVENT NAME > YOUR PROJECT NAME > CurrentVersion.fcpproject     this is the file that is causing the crash on startup. Luckily I had this file backed up from about a week ago so worst case scenario I'm not completely screwed. I replaced this file with the older one and now FCPX opens normally (i've just lost all that work since the backed up file).
FCPX is the first version of FCP I've ever worked with. So I am wondering if there is any way possible to repair this damaged project file. Thank you for your help.
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[720]: garbage collection is OFF
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFString isDrawingToScreen]: unrecognized selector sent to instance 0x1323a2340'
*** First throw call stack:
    0   CoreFoundation                      0x00007fff8ac5f286 __exceptionPreprocess + 198
    1   libobjc.A.dylib                     0x00007fff8a0f5d5e objc_exception_throw + 43
    2   CoreFoundation                      0x00007fff8aceb4ce -[NSObject doesNotRecognizeSelector:] + 190
    3   CoreFoundation                      0x00007fff8ac4c133 ___forwarding___ + 371
    4   CoreFoundation                      0x00007fff8ac4bf48 _CF_forwarding_prep_0 + 232
    5   AppKit                              0x00007fff8b64c436 -[NSView visibleRect] + 67
    6   AppKit                              0x00007fff8b64b783 -[NSView setNeedsDisplayInRect:] + 209
    7   AppKit                              0x00007fff8b67df42 -[NSView setNeedsDisplay:] + 80
    8   AppKit                              0x00007fff8b7e8914 -[NSPopUpButtonCell setTitle:] + 425
    9   AppKit                              0x00007fff8b7e9269 -[NSPopUpButtonCell setPullsDown:] + 182
    10 AppKit                              0x00007fff8b7e7a7e -[NSPopUpButton initWithFrame:pullsDown:] + 107
    11 AppKit                              0x00007fff8b7e7a0d -[NSPopUpButton initWithFrame:] + 59
    12 AppKit                              0x00007fff8b756f8b -[NSView init] + 63
    13 AppKit                              0x00007fff8b7e53a4 -[NSSpellChecker init] + 260
    14 AppKit                              0x00007fff8b7e5227 +[NSSpellChecker sharedSpellChecker] + 68
    15 AppKit                              0x00007fff8b7e514e -[NSTextView checkTextInRange:types:options:] + 937
    16 AppKit                              0x00007fff8b7e4d4e -[NSTextView _performScheduledTextChecking] + 413
    17 libdispatch.dylib                   0x00007fff889f52b6 _dispatch_source_invoke + 635
    18 libdispatch.dylib                   0x00007fff889f1f77 _dispatch_queue_invoke + 71
    19 libdispatch.dylib                   0x00007fff889f26f7 _dispatch_main_queue_callback_4CF + 257
    20 CoreFoundation                      0x00007fff8abf44dc __CFRunLoopRun + 1724
    21 CoreFoundation                      0x00007fff8abf3ae6 CFRunLoopRunSpecific + 230
    22 HIToolbox                           0x00007fff8dbb23d3 RunCurrentEventLoopInMode + 277
    23 HIToolbox                           0x00007fff8dbb963d ReceiveNextEventCommon + 355
    24 HIToolbox                           0x00007fff8dbb94ca BlockUntilNextEventMatchingListInMode + 62
    25 AppKit                              0x00007fff8b6123f1 _DPSNextEvent + 659
    26 AppKit                              0x00007fff8b611cf5 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
    27 AppKit                              0x00007fff8b60e62d -[NSApplication run] + 470
    28 ProKit                              0x00000001002f93c6 NSProApplicationMain + 387
    29 Final Cut Pro                       0x0000000100001478 start + 52
    30 ???                                 0x0000000000000002 0x0 + 2
terminate called throwing an exception
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib            0x00007fff8caffce2 __pthread_kill + 10
1   libsystem_c.dylib                 0x00007fff85a4b7d2 pthread_kill + 95
2   libsystem_c.dylib                 0x00007fff85a3ca7a abort + 143
3   libc++abi.dylib                   0x00007fff85ec77bc abort_message + 214
4   libc++abi.dylib                   0x00007fff85ec4fcf default_terminate() + 28
5   libobjc.A.dylib                   0x00007fff8a0f61b9 _objc_terminate + 94
6   libc++abi.dylib                   0x00007fff85ec5001 safe_handler_caller(void (*)()) + 11
7   libc++abi.dylib                   0x00007fff85ec505c std::terminate() + 16
8   libc++abi.dylib                   0x00007fff85ec6152 __cxa_throw + 114
9   libobjc.A.dylib                   0x00007fff8a0f5e7a objc_exception_throw + 327
10 com.apple.CoreFoundation          0x00007fff8aceb4ce -[NSObject doesNotRecognizeSelector:] + 190
11 com.apple.CoreFoundation          0x00007fff8ac4c133 ___forwarding___ + 371
12 com.apple.CoreFoundation          0x00007fff8ac4bf48 _CF_forwarding_prep_0 + 232
13 com.apple.AppKit                  0x00007fff8b64c436 -[NSView visibleRect] + 67
14 com.apple.AppKit                  0x00007fff8b64b783 -[NSView setNeedsDisplayInRect:] + 209
15 com.apple.AppKit                  0x00007fff8b67df42 -[NSView setNeedsDisplay:] + 80
16 com.apple.AppKit                  0x00007fff8b7e8914 -[NSPopUpButtonCell setTitle:] + 425
17 com.apple.AppKit                  0x00007fff8b7e9269 -[NSPopUpButtonCell setPullsDown:] + 182
18 com.apple.AppKit                  0x00007fff8b7e7a7e -[NSPopUpButton initWithFrame:pullsDown:] + 107
19 com.apple.AppKit                  0x00007fff8b7e7a0d -[NSPopUpButton initWithFrame:] + 59
20 com.apple.AppKit                  0x00007fff8b756f8b -[NSView init] + 63
21 com.apple.AppKit                  0x00007fff8b7e53a4 -[NSSpellChecker init] + 260
22 com.apple.AppKit                  0x00007fff8b7e5227 +[NSSpellChecker sharedSpellChecker] + 68
23 com.apple.AppKit                  0x00007fff8b7e514e -[NSTextView checkTextInRange:types:options:] + 937
24 com.apple.AppKit                  0x00007fff8b7e4d4e -[NSTextView _performScheduledTextChecking] + 413
25 libdispatch.dylib                 0x00007fff889f52b6 _dispatch_source_invoke + 635
26 libdispatch.dylib                 0x00007fff889f1f77 _dispatch_queue_invoke + 71
27 libdispatch.dylib                 0x00007fff889f26f7 _dispatch_main_queue_callback_4CF + 257
28 com.apple.CoreFoundation          0x00007fff8abf44dc __CFRunLoopRun + 1724
29 com.apple.CoreFoundation          0x00007fff8abf3ae6 CFRunLoopRunSpecific + 230
30 com.apple.HIToolbox               0x00007fff8dbb23d3 RunCurrentEventLoopInMode + 277
31 com.apple.HIToolbox               0x00007fff8dbb963d ReceiveNextEventCommon + 355
32 com.apple.HIToolbox               0x00007fff8dbb94ca BlockUntilNextEventMatchingListInMode + 62
33 com.apple.AppKit                  0x00007fff8b6123f1 _DPSNextEvent + 659
34 com.apple.AppKit                  0x00007fff8b611cf5 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
35 com.apple.AppKit                  0x00007fff8b60e62d -[NSApplication run] + 470
36 com.apple.prokit                  0x00000001002f93c6 NSProApplicationMain + 387
37 com.apple.FinalCut                0x0000000100001478 start + 52

Sorry, but unless you can boot from another volume you cannot repair the drive. You do not require the SL installer disc, but you do need to boot from another SL system. Or, if your computer has a Firewire port then you could connect it to another Intel Mac running SL and use Disk Utility from the other computer to repair your drive.
Now, that said you can attempt a local fix depending on what the problem is. Here's how:
Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
/sbin/fsck -fy
If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
If you were successful then enter:
reboot
and press RETURN to restart the computer.
Now the above cannot effect the repairs that Disk Utility can when booted from another drive or computer. But it can fix some problems. And, you should consider installing AppleJack - CNet Downloads or MacUpdate.

Nikon D3s RAW files are underexposed by Lightroom / Camera RAW

I'm used to shot RAW files only.
I recently bought a D3s, alongside with my D700 and I noticed D3s files were darker than D700 ones, by about 1/2 or even 2/3 stop. Initially I thought the problem was one of the cameras, but after some tests I found the problem is my RAW converter. Infact this happens only with NEF (RAW) files, and if I shot a RAW+JPG image, the D3s RAW file opened in Lightroom 4 (or Camera RAW) is underexposed if compared with its JPG on-camera version.
I think no camera setting is affecting this behaviour. I reset either the D3s and the D700. No D-Lighting is set on-camera. This happens only with the D3s and only with Camera RAW and Lightroom.
Other RAW converters display the D3s RAW file correctly exposed, the same as its JPG version, and the same as the D700 RAW and JPG. I tested so far Capture One, DxO Pro Optics and Raw Therapee.
Color profile used is custom, but I tried using Adobe Standard and the result is the same.
Default develop settings affect only color profile and sharpening, and I got the same problem on a fresh new installation of Lightroom where no default develop settings are set.
If anybody with a D3s can check if his NEFs are underexposed if compared to their JPG versions when opened in LR or Camera RAW, I would appreciate that much.
Any idea about the origins of my problem would be great.
Thank you.

alessandroavenali wrote:
I know, DdeGannes, but a different rendition of 2 pro cameras at the same settings is a bit frustrating.
Would it be better to underexpose the D700 while shooting, or setting a default -0,5EV on every imported picture, if the problem goes on?
Moreover, seems the Nikon D3s ISOs need to be pushed +2/3 to obtain the same exposure as the D700 in LR workflow. So the advantage of this great sensor could be lost.
I'd like to know more about D700 and D3s rendition comparison in LR/ACR at same settings.
It's not unusual for two camera bodies of even the same exact make and model to have Exposure differences of up to 1/3 EV, which is very noticeable. Ditto for White Balance differences. For Example:
Camera 1 is +1/3 EV and Camera 2 is -1/3 EV = 2/3 EV Difference
Camera 1 White Balance is -500KTemp and Camera 2 is +500K Temp = 1000K Difference
Tack on minor differences between the LR Camera Profiles and it will get much worse if heading in opposite directions, as above.
The only way to compare the raw NEF files from two cameras is to use a RAW converter that applies NO profiles, NO Gamma Correction, or any other modifications to the raw pixel data. See may post here for information on 'Rawnalyze:'
http://forums.adobe.com/message/3952812#3952812
You can download it here:
http://dave-anderson-photo.com/files/software/Rawnalyze/Rawnalyze_2.10.4.0.zip
Online manual here:
http://www.oitregor.com/numeric/Rawnalyze/Rawnalyse_doc/datas/RawnalyzeGuide.htm
None of the external links in the manual work, but nothing to worry about. If you have any questions on how to use it let me know.
I believe the Nikon D700, D3, and D3s cameras are supported in Rawnalyze 2.10.4.0. If not you can convert the NEF to DNG.

Why won't camera raw v4.6.0 open a Nikon D3s raw file?

I have a new-used Nikon D3s and Photoshop CS3 extended. I am using plug in camera raw version 4.6.0. I can see the raw file in bridge. When I double click the thumbnail photo it goes to a window in Ps that says, "Could not complete your request becasue it is not the right kind of document."
Any ideas on how to solve this problem?

You should know that the rendering, capabilities and performance of the current 7.x and 8.x versions of ACR are so far superior to their predecessors, that you will be leaving a lot of image quality on the table if you choose not to upgrade.
Some of us even found ourselves re-converting and re-editing some of our raw files that had been edited in previous versions of ACR, and even re-considering working on some that we had rejected because we deemed the dynamic range to be too extreme to render adequately.
Incidentally, what Bridge is showing you is the JPEG preview embedded in the raw file by the camera, not an ACR-rendition of the raw NEF file, so that has nothing to do with what the image will look like in ACR one converted.
Message was edited by: station_two

My nikon d3s raw files in lightroom have color shifts

my nikon d3s raw files in lightroom have color shifts in lightroom can anyone help me please?????

An answer to "when do you see it?" would also be helpful, just in case it relates to: http://forums.adobe.com/thread/358016

Fixing corrupt JPG files

Is there any good software out there for fixing corrupt JPG files?

Corruption damage in a .JPG entails data loss and the JPEG format does not contain redundancy, so there's no way to recover what's lost. Usually if the damage is found towards the end of the file, you can "recover" the good part by truncating it. If you want to do it interactively, you can try using software such as [The Gimp|http://www.gimp.org>, or its (very) expensive brother, Photoshop.
To do it automatically (batch mode) you can investigate if any of the tools in the [Image Magick package|http://www.imagemagick.org/script/index.php] helps. Note that these are command-line Unix tools.

Fixing Corrupt Files

I have Windows Vista and created another user account. When I tried to logon/open it I received the following error message: “The User Profile
Service service failed the logon. User Profile cannot be located.” I tried rebooting my computer with no success. I also tried System Restore with no luck in fixing the problem.
I then scanned for corrupt files using
‘sfc /scannow’ and received the msg "Unable to fix some corrupt files. Details in the
CBS.Log Windir\Logs\CBS\CBS.log. For example: C:Windows\Logs\CBS\CBS.log"
To identify the corrupt files that could not be fixed, I performed the following: "Click
Start - All Programs - Accessories - Right click Command Prompt and choose Run As Administrator. Type (or copy the below line and one blank line
underneath and right click in the command prompt window and choose Paste) - findstr
/c:"[SR] Cannot" %windir%\logs\cbs\cbs.log |more" and got the following:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation.
All rights reserved.
C:\Windows\system32>findstr /c:"[SR] Cannot" %windir%\logs\cbs\cbs.log |more
2014-01-17 10:06:35, Info
CSI    0000014d [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral,
VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:06:37, Info
CSI    0000014f [SR] Cannot repair me
mber file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL
(0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:07:39, Info
CSI    00000174 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope= 1 nonSxS, PublicKeyToken
= {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:07:44, Info
CSI    00000176 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope= 1 nonSxS, PublicKeyToken
= {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:10:19, Info
CSI    000001d5 [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral,
VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:10:19, Info
CSI    000001d7 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope= 1 nonSxS, PublicKeyToken
= {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:10:19, Info
CSI    000001dc [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral,
VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-17 10:10:19, Info
CSI    000001e2 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope= 1 nonSxS, PublicKeyToken
= {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Now I need to find out how to repair the corrupt files. Can anyone provide me directions?

Have you tried these steps?
Fix a corrupted user profile-vista
http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-vista
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215

Lightroom 4 corrupting Nikon D800 RAW files on import

Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?

How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
Can you prove the files were intact coming off the card and only are corrupted after importing into LR? Can you get to the originals on the card, still?

Windows will not start up because of a corrupt or missing file how to fix

Windows will not start up because of a corrupt or missing file how to fix

http://support.apple.com/kb/HT2801?viewlocale=en_US

Adobe Bridge Corrupts Canon CR2 files

Viewing Canon CR2 RAW files from a Canon EOS 7D or Canon EOS 40D camera will corrupt some images. After Adobe Bridge creates a
thumbnail of the CR2 files, some images previews will show the file with corruption (large white square or discolored areas). The CR2 file then
becomes corrupt. The file is not corrupt prior to viewing in bridge, but it becomes corrupt after viewing in bridge. The file is corrupt because it can
no longer be processed with any other RAW conversion program including ACR, DPP, or BreezeBrowser. If the file is marked as read only before viewing in bridge, the image preview shows corrupt in Bridge but the file remains intact and can be processed with Canon's DPP software. This issue first occured with CS4 and the ACR 5.5 update. The problem seemed to be less prevalent with the ACR 5.7 update. However after upgrading to CS5 this problem is back and worse than ever.
When doing a detailed file compare between a corrupted version of a CR2 file and a copy of the same file before the corruption occurs it appears as if metadata has been written to the wrong part of the file (middle) instead of the beginning (header).
Operating System: Windows 7

I am trying to fix this problem as well.
In my case, I've got Windows 7 (32-bit), CS5, and a Canon 50D.
I've got photos that I can view perfectly in Canon's Digital Photo Professional, but the SAME photo in the SAME directory opens corrupted in Bridge.
Here's an interesting wrinkle:
Scenarios:
(fyi - all my CR2 images are pulled off the CF card using Bridge's loader)
CR2 Image opened in Canon's Digital Photo Professional: Opens Fine.
CR2 Image opened in Photoshop directly (skipping Bridge): Opens Fine. (opens in Camera Raw first, of course, but still Fine)
CR2 Image 'browsed to' in Bridge: Corrupted pinky/yellow/white.
CR2 Image double-clicked in Bridge, opens in Camera Raw: Corrupted pinky/yellow/white.
Bridge closed.
CR2 image opened in Photoshop directly again. Pay attention... opens 1st in Camera Raw: Corrupted, but for only five seconds! It refreshes on its own and now is Fine! Click Open Image into Photoshop and it Opens Fine again.
It's clear to me Bridge/Adobe something is corrupting these images.
It seems sometimes that the corruption becomes permanent, and even Canon's Digital Photo Professional shows a corrupted image. In the scenarios and order mentioned above, the CR2 file remains openable fine in Digital Photo Professional. So, why other images I have cannot open well in Digital Photo Professional, I do not know -- perhaps the order I clicked things caused Bridge to update the CR2 file?
I'm in the process of updating all CS5 software to the latest, in case I'm missing some updates. If anything improves as a result, I'll update here.
]{evin

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past. The bridge no longer shows the picture view of my NEF files. These are Nikon NEF files from the Nikon 5100 DSLR camera. How do I fix this?

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past.
When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
Camera Raw plug-in | Supported cameras
The D5100 was first supported in Camera Raw version 6.4.
In Photoshop, click Help > Updates to update Camera Raw.

Fix corrupted Nikon D3s files in FCPX

Similar Messages

Maybe you are looking for