Fix for Canon 6C10 printer error. Permanent solution!

Ok, don't try this video if you don't know what your doing. This requires technical knowledge. I'm not responsible.
I finally found a solution to the Canon 6C10 purge unit error/service, which my local repair said that they need to replace the purge unit. Anyhow, from the looks of it, it seems like a design flaw of Canon but lets not be harsh about it. I made a video on how to fix it. Canon printers are great!
http://www.youtube.com/watch?v=-0tb07N1dIo

Brilliant! Thanks very much Chirantha, I have a MG5350, it doesn't have the switch you pointed at but I cleaned the wiper and operated the cam & it worked just great.
Thank you,
Colin

Similar Messages

Microsoft releases fix for Windows Update corruption errors

See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
The Microsoft KB article is found @
http://support.microsoft.com/kb/947821
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Hi Rick,
Really thanks for your sharing.
This will definitly help others in this forum.
Kate Li
TechNet Community Support

How to install Windows 7 64 bit driver for Canon i9100 Printer?

When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver. Visiting the Canon website, I find an update module for the Windows driver. Canon says the printer MUST be installed using Windows Updater before their driver update can be installed. I have tried everything, but I cannot get Windows to find a driver. Windows Updater says that my computer is Up To Date.
What am I doing wrong?
Thank you,
David

Hi Honeycutt,
The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update. Please try Microsoft's web page for assistance with troubleshooting this:
http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

FIX for Canon MP 600 after leopard installation

I discovered a fix for the Canon MP 600 after the leopard installation. After many challenges and troubleshooting with no positive results I tried something that worked!
Go to Applications on the HD, choose Utilities, Choose airport Utility.app. It will open and ask if you would like an update to the Airport Extreme Utility. Choose 'update' and follow instructions. I then went into the System Preferences, removed the MP 600 printer, downloaded the MP 600 driver from the Canon Website and installed it. I then rebooted the computer, went back to System Preferences, added in the MP 600 and all was working well.
I hope this helps someone.

on the 'rinting' topics, someone suggested throwing away all the drivers and downloading from the websiet. And it worked.
thanks to all who thought about it

Still no joy for Canon i450 printer

Print problems with update
this page is my test page
printing with Safari
http://news.yahoo.com/s/ap/us_cisco_restructuring
Canon i450
prints the framework but not the article
not fixed with first update
not fixed with second update
Canon mp560
fixed with first update
not broken with second update thank god
paranoid pat smells an abode rat
anybody get their i450 to print

I was just about to tell you the black tank was ok
when it sunk in that maybe all that was being printed was color.
So tried test page, nothing to compare to, but something printed, looked black.
Tried to clean nozzle, no joy.
Pages printed nothing but a blank sheet of paper.
Tried to deep clean nozzle. no joy.
So I thought maybe go back to basics and put a few lines in textedit
and throw in a line of red font just for fun.
I saw red and nothing else.
I had a black cartridge at hand
so I thought I would try.
And, as you diagnosed, the old cartridge was dead
Long live the new cartridge.
and thank you very much

Canon MF4570dn Printer error: capdftopdl failed

I have three iMacs all running OSX v10.6.8 and connected to a Canon MF4570dn printer via network static IP - using Bonjour protocol and Canon Driver.
Downloaded the latest drivers from the Canon website for OSX v10.6 and installed the package.
Only one of the iMacs will print/scan successfully.
The other two throw this error:
Error: /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl failed
So I called Canon and they walked me through removing and reinstalling the driver - of course with the same error result - so now they are telling me to call the computer manufacturer(Apple) for support for a corrupt driver (huh?).
Any ideas on how to get rid of this error and get the printer work?
Thanks.

hey, I tried what you said, but no luck, still getting the same error. Did you do anything else
The problem was under advanced networking -
there were entries in the Bypass Proxy Settings for these Hosts & Domains -
I removed the entry *.local, 169.254/16 (not needed) and that's all it took. Hope this helps someone else.

Drivers for Canon S400 Printer HELP!!!

Hello,
I'm trying to get my old Canon S400 printing, but I am having no luck. I have downloaded drivers 4.1.5 and 4.8.3 however when it came to printing, my printer was recognized as a "Canon FJ360" and when I tried to print, blank sheets came out even though I have topped up all of the ink cartridges. Does anybody know any fixes or other drivers that I could use in this case? I have the printer connected through an AirPort Express N.

I "think" the included Gimp-Print drivers include the S400 - you should try that for troubleshooting. (I say "think" because I have updated my Gimp-Print to Gutenprint:)
http://gimp-print.sourceforge.net/MacOSX.php3

Printer Dialog for Canon S9000 Printer

I dug out my large format Canon S9000 printer and am having trouble color correcting the photographic prints. Part of the trouble seems to be that in OS 10.6 I don't seem to be able to get the printer dialog box from the printer utility. When you go into the printer driver all you get is Canon S9000 in the box and I don't seem to be able to get into change any of the driver settings. Can anyone help? Thanks.

spinosaurus wrote:
I did download the latest driver for the S9000 available, although it is updated I believe only through OS X v10.5 and not 10.6.
The driver update is for 10.6. If you have v10.36.2.0 installed then at least there should be some level of comparison between my setup and yours.
I talked to Canon support and they told me that Apple writes the printer drivers for the OS systems and not them.
This is not true. Canon creates the drivers and provides them to Apple so that it they are available via Software Update.
Since you are using the same driver from Canon, maybe you could answer some of the following questions: What color space do you use for importing your photograph, sRGB, AdobeRGB, ProRGB, etc.? What color space do you use for viewing your photograph? Do use any ICC print profiles to print?
For the photo that I used to test, it was taken on my Canon EOS7D and imported using Image Capture. The Get Info for the photo shows the colour space as RGB and the colour profile as sRGB IEC61966-2.1.
For printing I selected the Canon profile to match the Canon Photo Plus Glossy, which is shown as GL3/SG3 in ColorSync. When PS was managing the colour this was selected via the PS print dialog > printer profile. When I selected the printer to manage, I used the Quality & Media tab to select the paper which in turn sets the profile, as seen in the Color Options menu.

Here's the FIX for one quicktime installation error

Can't believe this isn't mentioned in here anywhere or in any of the threads on the Web. I got help from the Ubergeeks on the Well, where I should have started in the first place.
If you can't install because Quicktime won't install (error -3, error 1402 etc.) and you can't get permissions to enter the registry keys...
Run: regedit
navigate to the folder mentioned in the error message. For me it was HKEYLocalMachine\Software\Microsoft\Windows\CurrentVersion\Uninstall\Quicktime
This seems to be the most often-cited culprit.
Right-click on the Quicktime folder. Select Permissions. Hit Advanced. Click the "Owner" tab. Click on yourself in the lower window. Hit OK.
Install your software and enjoy.
This may not fix everyone's problems, but I bet it fixes the vast majority of those that are similar to the one I had, which I spend hours and hours trying to fix before I simply asked someone who knew what they were doing.
Maybe if the folks at Apple see this, they can, you know, add it to their troubleshooting guide. It's a very common problem.

In case anyone is reading this thread, I found a fix for this problem. In another discussion thread, a nice person referenced an article at http://docs.info.apple.com/article.html?artnum=93865 that explains what to do with these kinds of permission errors (1402 and 1406). I followed the instructions and also made the changes to the specific line item I had a problem with. Installation ran successfully although there were a couple of error messages about not being able to unregister a couple of .dlls, which apparently is not fatal to the installation.

Looking for Canon i9900 print driver

I am looking for a print driver for my Canon i9900 large format printer
Canon support indicates no driver is available

You will have to use the Gutenprint v5.2.10 driver package. That model is too old for Canon to provide a supporting driver.

Fix for iMessage/Facetime login error following iOS 7 update

Go into Settings. Correct your Date/Time settings because the update threw them off. This is common with apple updates. It will fix your iMessage/Facetime login errors.

This won't work for the iphone 5...

Still no fix for Photoshop Install / Update Error? (Exit Code 15 - inconsistency in installer db)

I have tried every suggested fix to no avail... what gives Adobe?
- Removed all versions of Photoshop
- Started in safe mode
- Used cleaner tool
- Used plist method
All apps update except Photoshop and I can't install at all on other MacBook Pros.
Can we please get a fix for this? So many threads on this topic from other customers!!!

After using the Adobe Clean tool, I checked its output log and it mentioned it couldn't find a "caps.db" in the Common Files/Adobe/caps/ folder under Program Files or Program Files (x86).
So what I did: I manually deleted the Adobe folders from:
- Program Files
- Program Files (x86)
- Program Files (x86)/Common Files
After that, I was able to install successfully Photoshop CS5.1 and at this very moment I'm able to install PS CS6 (it's been already 50% of the installing progress).
So far, this action of deleting the Adobe folders from my Program Files folders seems to be sorting out the matter...

Software issues for Canon LBP7110cw printer

I recently bought a Canon LBP7110cw printer and after installing App Store updates, I am still unable to print. I downloaded the driver and software through Canon, but I still can't print. Any other options?

http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Installed driver for Canon MP640 printer but when I use comes up with communication error

Hello
I have just purchased a new IMac and have had very little to do with Apple before so everything is foreign. I used the help desk today to download the driver for my printer Canon MP640 which came up as connected with the green light. When I went to print my first document it is now coming up with an error that ther is a "communication error". I am not a techno person and don't have a great deal of patience with technology.
Please helllppp.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Need fix for change the batteries error on canon powershot s2 is

"change the batteries" error message is popping up after taking 2 or 3 pictures with a new set of batteries. After surfing the Internet for solutions we found changing the date battery should solve the problem. But it does not work. We also tried formatting the SD card. Please help

Hi Vindhiya!
Thank you for posting and welcome to the Canon Forum.
The connection between the batteries and the camera may be dirty. Gently clean over the contacts on the battery compartment cover, inside the battery compartment and on the batteries. Make sure the batteries are fresh as well. If this does not help, the camera will be in need of repair.
The Powershot S2 IS is no longer in service life, so it is unable to be repaired by our Factory Service Centers. However, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Fix for Canon 6C10 printer error. Permanent solution!

Similar Messages

Maybe you are looking for