Fix for Encore 2 microphone's warp sound and volume issue

I had just recently purchased an Encore 2 and found out everything works crisp and great except the microphone sound quality when recording a video. How I could solve this hard to fix problem.
I came up with solution and works great. Total notice imporvement and found out driver adjustment problem like I speculated due to PC pcb solid state build in terms of on board hardware usually-not sure but probable.
1. Make sure to utilize Toshiba Service Station and updated the new bios, intel installer, Realtek audio, wireless, and mirroring.
2, After the Realtek audio install you should get a icon on start programs list or on your desktop.
3. There click and up comes Realtek Audio Manager.. There go to advance and bring up Windows sound manager I think on a button below rest.
4. Here got to l think last tab and click on radio Do nothing instead of like 80% noise supression and click ok.
5. On the Realtek Audio Manager adjust microphone volume from 17 to 90 and boost to 0.
6. Next on the Manager click on voice button and set it to disable all.
7. This should give you a well adjust computer mic on regular PC level video and sound recording. It's pretty good. Adjust mic volume for background noise just like a desktop.
Mainly I speculate since Encore 2 is full Windows 8.1 tablet that it share approximately same requirements as laptop pc in function and has a PC mic processor rounting and connections instead of like a smartphones systems. You have to treat the mic as a laptop PC mic funtions and tune accordingly. Videos are now perfect seems like unless something comes up.
Need help ask for completion.

i found a? way to reduce to a large extend the noise if i touch the computer case.
but still there's echoing in ts and steam.

Similar Messages

Found a fix for iTunes 10.6.1 store and connection issues

Been having trouble for months not being able to connect to the store and then after the most recent update couldn't even connect to the internet to import a physical CD (wouldn't connect to Gracenotes), import purchases I made on my phone or even to check for iTunes updaes. After reading some other posts about the winsocket concerns I ran a diagnostic and found a real player file called speedster used to enhance download speed using the winsocket. I just uninstalled realplayer (I did have real player plus btw) and BAM all issues with iTunes were fixed. Opened iTunes, store loaded and all my purchases from my iphone and ipod touch started downloading. Simple, but ridiculous it caused that much trouble and not been an update to fix it yet seeing months of problems out there.

Ha! Issue solved. The track not showing the arrows was a PDF in iTunes. All is well.

I have a number of apps on my Ipad2 that no longer have sound. I have checked setting on my ipad and the settings on the apps that have a settings and the sound and volume are ok. Do I have a virus in some apps?

I have a number of apps on my ipad2 tha no longer have sound. I have checked the ipad settings and the apps that have settings and all sound and volume are ok. Do I have a virus? Pandora sound is ok. It seems mostly to be games...angry birds, tap tap, and educational games for little ones. Any suggestions?

There aren't any viruses for iOS devices. Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Why do the sound and volume go in and out. Sometimes my iPhone and iPad loose the sound and volume

Why do the sound and volume go in and out. Sometimes my iPhone and iPad loose the sound and volume

It should remain the way you have adjusted them. Delete the System Preferences.plist per these instructions:
https://discussions.apple.com/docs/DOC-4301
Ciao.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Brand new MacBook Pro w/Retina Display, PSE11 looks like a mess, bad resolution, pixelated fonts and pictures, is there a fix for this? This is a major, major issue for me as I use PSE all...the...time! Thx.

Just purchased a brand new MBP, and all programs look awesome on it except the one software program where crisp display is required - PSE11. I really need to know my options, is this a fix in the near future? Is PSE12 retina display friendly? Any other options? Thank you.

I am not a Mac user, but your problem is the same with other HDPI high resolution displays.
See that discussion on the feedback forum:
http://feedback.photoshop.com/photoshop_family/topics/please_add_retina_support_to_photosh op_elements_11
Nobody can tell if future versions will solve the problem, but don't expect a fix for PSE12.
shoregrl20 wrote:
Just purchased a brand new MBP, and all programs look awesome on it except the one software program where crisp display is required - PSE11.
I completely disagree about the 'crisp display' requirement. Photo editing on computers has its own requirements which do take into account the practical resolution of the display, its size and viewing distance and the fact that you have to work alternatively on the whole image or the pixel level. Working comfortably without straining your eyesight means a lot of things including display size and viewing distance (good : 24 to 27" at 80 - 100 cm) with optimal resolution : 1920 x 1200; good colour fidelity and absence of reflections.
If you compare side by side HDPi vs more standard displays, you won't see the difference in a normal editing session, only if you look closely for a long time at a still image.
Standard displays are crisp enough, don't be fooled by the marketing trick of the higher figures. Even 1920 x 1200 resolution is more than enough for a 15" display. Spend the price difference on a good and comfortable. external display. Make use of the shortcuts to quickly zoom and pan in your images.

Is possible to use PCI 6250 card for order power spectrum in sound and vibration

Hai all,
Iam new to Labview sound and vibration. In my application i need to extract the order power spectrum, for that iam using PCI 6250 NIcard. I tried with our NI example program i cant able to get the prober result. Whether this card is suitable for my apllication ?. If it is suitable can any one explain to me to get the order power spectrum...
In my application iam using one analog signal and one encoder signal(Speed) . Can any one Help...
Thanks in advance,
Vijay

iam using one accelerometer to get the signal from transaxle gear box. This accelerometer signal iam passing to charge amplifier card to get 0-10v signal. This signal iam passing to PCI6250 ai- 0 channel and encoder is connected with motor is passing to ai-1channel for analog tacho. iam using NI example program (Order power spectrum - analog tacho. VI).
sampling rate is 1000 S/s and no. of samples 1000 for acquiring data. But i cant able to get speed and order magnitude value proberly. Encoder PPR -1000. Can u help me....
Regards,
Vijay.

Any news on a fix for incompatibility between non-apple docks and ios 7?

Neither Bose nor Sony dock will play music after "upgrading" to ios 7. I've seen many complaints on these forums but haven't heard any sort of response from Apple. None of the "fixes" have worked for me. Any news about a patch? Thanks.

Here's what M-Audio's support sent me today:
The iControl Protocol (the protocol by which the iControl Control Surface communicates with Garage Band and Logic) was created by Apple, and the iControl Control Surface was designed by M-Audio to Apple s specifications. The iControl has no drivers to install and is class compliant.
It has happened over the course of Garage Band and Logic development that some updates (both major and incremental) of these applications have had the side effect of changing the way certain features of iControl interact with the Apple software.
Since the iControl was built to Apple s original specifications, and since the device uses no drivers (therefore no M-Audio drivers to update), there is no way for M-Audio to address these issues directly. Any fixes for these issues would have to come in the form of updates to Garage Band or Logic.
That obviously doesn't keep them from marketing and selling it ...

Boot Camp sound and volume

I used Boot Camp to run Windows 7, but my sound and microphone wont work. How can I fix this?
The is turned to 100% and I have already gone into the control panel to make sure that nothing was muted.
Thank you for any help or info.

I have updated with the OSX 10.5 disc and updated the drivers. I have done several internet searches that included information about text-to-speech to possible problems running WWS2000. I followed the directions for how to install the program when using it in a bootcamp partition on a Mac but the same problems kept occurring. I have googled the error box message that comes up and followed the directions for the two possible solutions that were listed on the product support page. At this point I am not sure what else to do.

Less destructive fix for the "original file could not be found" issue

+(Note: this is mostly a copy of the post I just submitted in reply to http://discussions.apple.com/message.jspa?messageID=6785594#6785594)+
Most solutions to the "The song xxx could not be used because the original file could not be found. Would you like to locate it?" issue involve deleting iTunes library files, deleting-then-re-importing everything from iTunes, and other destructive techniques. I found an easier fix for this, but it might be (a) specific to libraries on a network drive (NAS) or (b) specific to me. YMMV, but give it a try. This was on a Mac, so a Windows solution might exist with the same technique. Please post here and let me know if this works for you!
After some investigating and trial-and-error, I discovered that if I viewed a list of songs in Finder, iTunes could find the files again. For example:
*Double click on a song in iTunes and get the "original file could not be found..." error. Do not say 'Yes' to locating it.
*Open Finder and locate that Folder of songs
*Double-click on another song from that album. It should work.
So, my fix: *run a command that lists/touches every file in your iTunes music folder.*
For Macs:
*Open Terminal
*Run this: *ls -R /Path/To/Your/iTunes\ Music \Folder/* (note how you 'escape' spaces in the folder name with back-slashes).
Windows:
*Start - Run - cmd
*Run this: dir /s \Path\To\Your\"iTunes Music Folder" (note that you escape spaces by quoting the dir name.)
My NAS is named "VAULT" so my command was "ls -R /Volumes/VAULT/My\ Music/" You will see the files being listed at light speed -- ignore this. It will run for a while, depending on how many files you have, about 30 seconds for me. After executing this I could listen to any music file in iTunes!
But, every time I lost my connection to my NAS, such as waking from sleep mode, I had to run it again. So I created an Automator application and a Apple Script to run it from within iTunes so I can run it any time I need to. If you don't want to do that, just run the command I specified. If you want to download my Automator app, or see instructions on how to create your own, check out my blog post: http://40withegg.com/2008/3/8/mac-attack-making-itunes-find-those-original-files -especially-on-a-nas
With any luck, my post will be *completely unnecessary* soon because Apple will find a real solution to this.

Jeffe hello,
I have seen more problems created by the consolidate command than I have ever seen fix things... I'm not saying it does not work but what it does do and what it does not is very hard to work out for most and major problems are the result...
to sort your problem do this...
1. Open your iTunes folder in the Home Music folder and make a backup copy of the iTunes Library file and put on the desktop.
2. Start iTunes and in the Library sort on the Heading 'Date added' ... you may need to install it... control/click on heading-bar and select from popup menu.
3. When you have sorted scroll to half way and you will see the songs are split evenly... select the ones you want to remove with a shift/click and hit delete key... say no about move to trash for now.
4. Check that everything is as you want it... if so carry on... if not come back and tell me what happened.
5. Quit iTunes and put the iTunes Library file in the iTunes folder in a safe place like your Documents folder... drag the copy from desktop and put it in the iTunes folder.
6. Check the name is correct on the 'copy' edit it to be iTunes Library.
7. Start iTunes by double/clicking on the file and go through steps 2 & 3 again but this time when you delete say yes about move to trash... don't empty it yet 1st check that all is OK with your library.
You can edit the good files that you are left with but the addition of '01' in the name will not have any adverse effect on them at all... editing with an Applescript is very easy.
take care Jeffe and let's know how you get on or if you run into any unforeseen problems ... TP

Adobe after fx cc 2014 sound and playback issue

When I rendered my first scene in adobe after fx cc 2014 I noticed I had no sound, and the video was playing frame by frame not full speed.
What did I do wrong?
Big D.

You probably used the default Lossless preset in the Output Module. You should probably type rendering in the search help field at the top right corner of AE and study up on the options.

Settings and volume issues

My settings have been changing randomly. Also my volume and volume controls have been working sporadically since the update... i have restored my phone 2x. now what??

Hey ssarkissov,
Welcome to the BlackBerry® Support Community Forums.
Changes that are made to notifications are globally to all all modes, each mode can not be customized. Currently when customizing a contact you cannot set the volume for this contact to silent.
Let me know if you have any questions.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

This is the fix for "iTunes has encountered a problem and needs to close .

I recently purchased a new laptop and tried to get my library transferred. iTunes wouldn’t open; QuickTime wouldn’t open. I was near a heart attack. I tried the fixes listed in the forum, but they didn’t work. Then I discovered:
The fix needs to be done in a proper order!
a. Delete iTunes and QuickTime from Add/Remove programs
b. Go to C > Program files an delete the folders for iTunes and QuickTime. If QT will not allow you to delete the program because it’s “in use”, then go to Start > Run > configsys > Startup and deselect “qttask”. You will have to reboot and get past the selective start up/diagnostic screen. Then go back to C > Program files and you will now be able to delete the QuickTime folder.
c. For good order’s sake, delete any desktop shortcuts and empty your Recycle Bin.
d. Reboot
e. Download the STAND ALONE version of QuickTime: http://www.apple.com/quicktime/download/standalone.html
f. Install the stand alone version; reboot. At this time, when the diagnostic window comes up, you can reselect “qttask”
g. Download the QuickTime 7 with iTunes 6: http://www.apple.com/quicktime/download/win.html
h. Install the iTunes program. The stand alone will take precedence over the imbedded version of QuickTime.
i. Reboot
When your system has completed the reboot, you should be able to double-click the newly installed desktop shortcut; give it a few minutes and it should open. Mine did – and I tried everything else. If this does NOT work, then there is a conflict with something else in your system and you will have to go through the configsys elimination process, which is a whole lot more work.
Best of luck!

Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead.

The fix for "iTunes has encountered a problem and needs to close . . ."

I recently purchased a new laptop and tried to get my library transferred. iTunes wouldn’t open; QuickTime wouldn’t open. I was near a heart attack. I tried the fixes listed in the forum, but they didn’t work. Then I discovered:
The fix needs to be done in a proper order!
a. Delete iTunes and QuickTime from Add/Remove programs
b. Go to C > Program files an delete the folders for iTunes and QuickTime. If QT will not allow you to delete the program because it’s “in use”, then go to Start > Run > configsys > Startup and deselect “qttask”. You will have to reboot and get past the selective start up/diagnostic screen. Then go back to C > Program files and you will now be able to delete the QuickTime folder.
c. For good order’s sake, delete any desktop shortcuts and empty your Recycle Bin.
d. Reboot
e. Download the STAND ALONE version of QuickTime: http://www.apple.com/quicktime/download/standalone.html
f. Install the stand alone version; reboot
g. Download the QuickTime 7 with iTunes 6: http://www.apple.com/quicktime/download/win.html
h. Install the iTunes program. The stand alone will take precedence over the imbedded version of QuickTime.
i. Reboot
When your system has completed the reboot, you should be able to double-click the newly installed desktop shortcut; give it a few minutes and it should open. Mine did – and I tried everything else. If this does NOT work, then there is a conflict with something else in your system and you will have to go through the configsys elimination process, which is a whole lot more work.
Best of luck!
Gateway laptop Windows XP

The first thing to check is Quicktime as iTunes will not work without it.
Does Quickime launch OK and work normally?
If it does use the method in this article to troubleshoot iTunes:
http://support.apple.com/kb/TS1421
If QUicktime does not launch, describe what happens with any error message in full.
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
If so uninstall them, they are know to cause problems with QUickitme.
Then download the version of Quickime without iTunes (it is not the default option):
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.

Is there a fix for itunes 10.5 win xp and/or is there a way to convert my itunes library to 128/256k/bps (vbr)so songs are listenable?

RE:ROBOT NOISE WIN XP BITRATE PROBLEM..is there a fix or is there one on the way for itunes 10.5 for win xp bit rate problem,a.k.a. :robot noise,and or is there a way to convert my music files to itunes plus - 128/256kbps(vbr) as this is the only format that plays right?

I don't know of any utilities that can repair audio files, just as there is no auto-picture repair utility. However, due to the structure of an aac file (and for iTunes they all come "wrapped" in an mp4 wrapper), it depends on where the damage is. Your aac file is actually comprised of around 60 'atoms' and only 1 of them ("mdat") is the audio. If the damage occurred in a non-mdat atom, you might be able to resurrect your m4a file.
See if you can open these songs in Quicktime Player, and export then as AIFF, and then re-import them using iTunes. You can also direct copy the audio track with a more comprehensive tool called MP4Box (part of an opensource tool called "gpac"). You can get a mp4box binary in a tool called ffmpegx. You'll have to choose "show package contents" and use it Terminal.app's command line:
/Supply/path/to/--->/ffmpegX.app/Contents/Resources/MP4Box -add ~/Desktop/Closer.m4a#audio -new ~/Desktop/try.m4a
(substitute the ~/Desktop paths with your files; note: you depending on your files, the '#audio' might need to be replaced with '#TrackID=1' or appropriate number).
I would advise you to try the mp4box way first (to minimize audio loss with multiple conversions) and listen to each song, checking each. If it fails, then I would try the Quicktime way. If that fails, I would go back to the source material. Whether you use Quicktime or mp4box, you'll loose the metadata. You'll need to re-do that.
and I agree with dwb that iTunes didn't cause it. I would save things to cdr/dvdr before your data loss gets larger.

Fix for Encore 2 microphone's warp sound and volume issue

Similar Messages

Maybe you are looking for