Fix for issue where update KB2760758 broke multiline text properties field in custom content type

In September Microsoft Office update KB2760758 caused an issue with the multi-line field used in custom content type used in SharePoint 2010 document libraries.  KB2826026 apparently caused the same issue. 
Users were not be able to save documents on the SP server (in a document library) as MS Word would prompt them with a "Required properties" error message stating: ".. correct the invalid or missing required properties".
Several sources indicated that this was supposed to be fixed in the December Office updates, but I don't see an update that affects MSO.dll where the problem originates.  Does anyone know which update fixes the issue?

I updated you on my blog post, but just to provide an update here for those searching, this issue is not fixed in the update to the MSO.DLL available in the Dec 2013 CU, and the product group currently has no ETA on a fix.
Of course, PSS should update me as soon as they do hear of an ETA from the PG.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • Microsoft Office update KB2760758 breaks multiline text properties field in custom content type

    Last week SharePoint users have reported issue with multi-line field used in custom content type used in SharePoint 2010 document libraries.
    Users were not be able to save documents on the server (in a document library) as 'word' would prompt them with a "Required properties" error message stating: ".. correct the invalid or missing required properties"
    After some research I found out that removing the following update KB2760758 would fix the problem.
    Obviously this is not an acceptable solution and I would like to know if this issue has been reported and a fix would be issued sooner than later.

    I got an answer already!  So it is a known issue and the update for this particular bug will be released in the Office 2010 December updates.
    It has to do with a bug in MSO.DLL (which we knew already) with versions of the DLL greater than 14.0.710x.xxxx.  You may want to inspect further updates prior to December to validate that they do not contain an updated version of this DLL.  This
    includes security and non-security updates that may be released between now and then.  Every KB has a listing of the DLLs it replaces, so be diligent about checking each update's KB for this particular DLL.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • [svn:fx-trunk] 16098: Fix for issue where @ includeExample tag to an MXML file casues a compiler error.

    Revision: 16098
    Revision: 16098
    Author:   [email protected]
    Date:     2010-05-13 12:47:41 -0700 (Thu, 13 May 2010)
    Log Message:
    Fix for issue where @includeExample tag to an MXML file casues a compiler error. The issue was caused due to improper closing of comment in mxml file. With this fix ASDoc does not short circuit in such a scenario, instead it logs that into validation_errors.log
    QE notes: None
    Doc notes: None
    Bugs: SDK-26380
    Reviewer: Darrell
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-26380
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Hi _spoboyle,
    Yes i have seen that message before which gave me a few things to test out but to no avail. I am setting the data channel port between 45000-50000 as per the post you suggested and the data channel Port being assigned in my code is between those numbers. I have also set my firewall to open ports 45000-50000 to test to see if that was the issue as I hadnt done that previously but I get the same problem.
    The actual file get placed on the FTP server as well, it pauses as if its trying to send the data but then just give me the socket error message.....frustrating!!
    Im running out of ideas

  • [svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

    Revision: 12982
    Revision: 12982
    Author:   [email protected]
    Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
    Log Message:
    Fix for issue with exposing accessible names for combobox list items
    QE notes: none
    Doc notes: none
    Bugs: n/a
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

    Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
    margin-bottom: -2px;
    Your nav p will then look like this:
    nav p {
              font-size: 90%;
              font-weight: bold;
              color: #FFC;
              background-color: #090;
              text-align: right;
              padding-top: 5px;
              padding-right: 20px;
              padding-bottom: 5px;
              border-bottom-width: 2px;
              border-bottom-style: solid;
              border-bottom-color: #060;
              background-image: url(images/background.png);
              background-repeat: repeat-x;
              margin-bottom: -2px;

  • Updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    Do you really mean the latest, as in 11.0.1?  That was supposed to include a fix for Airplay.

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

    Hi there,
    Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
    Thanks,

    Hi，
    Per my knowledge,
    it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
    You can also filter the list view using SharePoint Designer,
    Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
    Best Regards，
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to use custom aspx page as template for custom content type

    Hi,
    I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
    Can anybody please let me know how to accomplish this?
    Any help would be appreciated.
    Thank you,
    AA.

    Check if you are looking for the below
    http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Created column not showing in the Document Library View for a Custom Content Type based on Document

    We have a custom content type based of Document Content Type. The OOTB "Created" column does not show up in the view as well as in the Site Settings -> Columns.
    But it shows up in the Display Form and Edit Form of the Item at the bottom "Created at " by " " and "Modified by" at by ""
    Would anyone know how to make this column appear as part of the view ?
    thanks,
    Harsh

    Hi,
    They should by default be possible to add to a view. The only reason they would disappear from the UI if someone has changed the attribute of the Field to hidden = true. You can verify that with PowerShell and if so you can use PowerShell to revert the setting
    to false.
    $w = Get-SPWeb http://dev13$f = $w.Fields.GetFieldByInternalName("Created")$f.Hidden$f.Hidden = $false$f.Update()

  • Still no fix for Photoshop Install / Update Error? (Exit Code 15 - inconsistency in installer db)

    I have tried every suggested fix to no avail... what gives Adobe?
    - Removed all versions of Photoshop
    - Started in safe mode
    - Used cleaner tool
    - Used plist method
    All apps update except Photoshop and I can't install at all on other MacBook Pros.
    Can we please get a fix for this? So many threads on this topic from other customers!!!

    After using the Adobe Clean tool, I checked its output log and it mentioned it couldn't find a "caps.db" in the Common Files/Adobe/caps/ folder under Program Files or Program Files (x86).
    So what I did: I manually deleted the Adobe folders from:
    - Program Files
    - Program Files (x86)
    - Program Files (x86)/Common Files
    After that, I was able to install successfully Photoshop CS5.1 and at this very moment I'm able to install PS CS6 (it's been already 50% of the installing progress).
    So far, this action of deleting the Adobe folders from my Program Files folders seems to be sorting out the matter...

  • How do I fix this issue where im seeing my screen display an image of the itunes symbol pointed by an arrow and usb cable

    What steps are needed to fix this issue?

    Hi Angelo,
    Follow the instructions in this Support Article:
    IOS RECOVERY MODE RESTORE
    Cheers,
    GB

  • System Update and Fix for Issue of HDD with HDP Detection for Windows Vista/7

    T500/Vista Business
    Hi,
    (Recommended) Fix mentioned in subject line doesn't install on my machine and I'm not sure what it is (hard drive detection .. something :-).
    Would someone pls explain it to me.
    Many thanks.
    woofy1

    Well, here on my X200 the same situation!!!
    I tried it how it was explained in the details - but won't install.

  • 2.2 - When are we getting a fix for the crap update? Can I get rid of 2.2?

    Ever since my phone did the update..It's a piece of crap.  It goes so slow. It freezes ALL of the time. I can't open my text messages several times a day.  I don't receive phone calls sometimes, while it's doing it's freezing thing. It has me force close apps over and over again, many times a day.
    I've taken the phone into Verizon and they did a "reset" but that did nothing...after about 15 mins of use it was doing all of the freezing and force closing again.
    Everyone is having problems since the 2.2.  I can't believe more people haven't signed up for this forum on purpose to complain or try and get answers like I did. 
    Does ANYONE have any answers? 
    Can I get rid of the 2.2 and go back to how my phone was before because it worked perfectly then. 
    Is there an update coming to fix this update?
    Should I just get a new phone?  Or a different phone all together?
    Is there some trick I don't know about that will fix all of this crap?
    2.2 reminds me of Vista when it first came out.  Nothing but bugs and problems for everyone.  A totally new way cool system that wasn't perfected before forcing everyone to have it.
    UGH!   Help anyone?

    jennymarie84 wrote:
    Ever since my phone did the update..It's a piece of crap.  It goes so slow. It freezes ALL of the time. I can't open my text messages several times a day.  I don't receive phone calls sometimes, while it's doing it's freezing thing. It has me force close apps over and over again, many times a day.
    I've taken the phone into Verizon and they did a "reset" but that did nothing...after about 15 mins of use it was doing all of the freezing and force closing again.
    Everyone is having problems since the 2.2.  I can't believe more people haven't signed up for this forum on purpose to complain or try and get answers like I did. 
    Does ANYONE have any answers? 
    Can I get rid of the 2.2 and go back to how my phone was before because it worked perfectly then. 
    Is there an update coming to fix this update?
    Should I just get a new phone?  Or a different phone all together?
    Is there some trick I don't know about that will fix all of this crap?
    2.2 reminds me of Vista when it first came out.  Nothing but bugs and problems for everyone.  A totally new way cool system that wasn't perfected before forcing everyone to have it.
    UGH!   Help anyone?
    Search the boards, everyone is NOT having issues, in fact most are not. That is why there are not a ton of messages. But they are there.I was one at one point. I personally, would do a factory reset. That was my cure all. Two if you have a task killer, delete it.
    Other things to try before a reset is pull the battery out while the unit is on, wait a minute, reinsert and power up. (Basically a soft reset) Also dial and call *228 and choose option 1.
    No you can not go back to 2.1, without voiding your warranty and 2.1 is not needed anyways.
    If you are unsure on how to do a factory reset, (I suspect the store did a soft reset) leave a message here and someone will walk you through. IF you do teh factory reset and still have locking up issues, you will need to do a warranty exchange.

  • Fix for iTunes account update

    I could not get past the 'enter credit card' screen on the music store.........either on the G5 or Windows XP........I went into the Apple Store login, and updated my account there........including my credit card info........then went back to the Music Store through iTunes.....it recognized that it was the first attempt on the apple ID account.....let me agree to the terms and conditions......and BINGO........it worked !!!!!
    Several others have posted similar frustrations......try this method to see if you have similar luck......
    iMac G5   Mac OS X (10.4.4)  

    Try here first >  Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    If you can't resolve the issue on your own, call Apple or schedule a call >   Apple - Support - Solutions
    Keep in mind, this is a user to user forum. You are not communicating directly with Apple here. No one here can fix your Apple iD.

  • Is there a security fix for Java 6 Update 34 for OS X 10.5.8?

    Firefox is warning me my Java plug in is still a security risk, despite having the latest update for my system. Apple do not seem to have fixed Java 6 Update 34 for 10.5.8 users, only Java 6 Update 35, which is only for OS X 10.7 and higher.
    Any help or advice would be much appreciated, as I need Java for online tax returns!
    Thanks, in advance?

    P.S. Why are Apple ignoring their 10.5.8 customers? Not all of us can afford to replace our Macs with the latest models. Some of Apple's recent sharp practices regarding customer service and loyalty, are reminiscent of Microsoft's when it had an almost total monopoly on the PC software market.

Maybe you are looking for