Fix for Jaggies and Ripples in Ken Burns Photos?

I thought using the Ken Burns effect to render your photos was supposed to be a cure for the jaggies, but I still notice a lot of jaggies and ripples during photo panning and zooming in the finished DVD. Is there a fix for this? Am I overlooking something?
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
One other observation- iMovie08 seems to do a MUCH better job with the Ken Burns effect. Unfortunately, the rest of the movie doesn't seem to be as crisp, and the transitions, effects, etc, in iMovie 08 are more limited. (plus I hate the user interface).

oregonpete wrote:
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
I keep seeing this suggested in thread after thread. However, I'm still a little confused by it. I'm assuming that this suggestion refers to not exporting out or sending to iDVD when FINISHED with iMovie Project.
Because doesn't iMovie do some "rendering" while you're working in it? It "renders" transitions, effects, etc.
I'm assuming that it's just a difference in the context and time of the "rendering" that makes it different, but using the same term confuses me.
If someone could clarify this or explain it in more depth, I would be grateful.

Similar Messages

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

[svn:fx-trunk] 10001: Fix for TextGraphicNode and RichTextNode delegated content property.

Revision: 10001
Author:   [email protected]
Date:     2009-09-03 13:03:50 -0700 (Thu, 03 Sep 2009)
Log Message:
Fix for TextGraphicNode and RichTextNode delegated content property. We used to pick up cdata from before and after the content tags and consider them content, this was wrong and the new line and tabs threw TLF for a loop.
This change will need to be communicated to and integrated with, CoreTech.
QE notes: None
Doc notes: None
Bugs: SDK-22851
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22851
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextGraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v1_0_Handler.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v2_0_Handler.java
Added Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava

[svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

Revision: 4235
Author: [email protected]
Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
Log Message:
Fix for - Links and type information missing for air.update.event events in @event listings
Also adding support for multiple @event for a method.
QE Notes: None
Doc Notes: None
Bugs: SDK-18319
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18319
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi All,
I have sorted out the problem and this is fixed now.
Regards,
Ajay Kunde

[svn:fx-trunk] 8551: Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed .

Revision: 8551
Author:   [email protected]
Date:     2009-07-14 11:31:50 -0700 (Tue, 14 Jul 2009)
Log Message:
Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed.
Bugs: SDK-17766
Reviewer: Glenn
QE Notes: None
Doc Notes: None
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17766
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ErrorSkin.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/FocusSkin.as

[svn:fx-trunk] 12980: Minor fix for SliderBaseAccImpl and SpinnerAccImpl

Revision: 12980
Revision: 12980
Author:   [email protected]
Date:     2009-12-15 17:33:56 -0800 (Tue, 15 Dec 2009)
Log Message:
Minor fix for SliderBaseAccImpl and SpinnerAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SliderBaseAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SpinnerAccImpl.as

FCE4 and iDVD Anamorphic Ken Burns

I created a 60min movie in iMovie8 using three media: 1) NTSC Anamorphic DV from a Panasonic PV-GS80, 2) JPEG 2816x2112 stills from a Panasonic DMC-FX3, and 3) 848x480 motion JPEG video from the DMC-FX3. An iMovie 8 project in 16:9 aspect was burned to DVD by iDVD and viewed on a 16:9 LCD TV with no problems encountered and pretty decent quality.
However, frustrated by the lack of basic features in iMovie, I purchased FCE4 after speaking with an Apple rep at Best Buy who assured me that it could import iMovie8 projects. Although I was carrying a disc with my iMovie project, I wasn't allowed to verify this in the store. Unfortunately, Apple's claim that iMovie8 projects can be imported into FCE4 is grossly misleading at best. They say "With iMovie ’08, putting together a great movie is as quick as drag and drop. When you want to add professional polish to your project, simply export to Final Cut Express 4 and edit like a pro." In fact, contrary to the FCE4 manual, iMovie8 projects cannot simply be opened: Incompatible files. Apple tech support told me iMovie8 projects must first be exported as XML.
The truth is that iMovie8 projects must be tediously recreated for FCE4 because it can't use MP3 audio files (must recapture from CD's), it doesn't recognize transitions (must recreate Ken Burns effects from scratch), and DV NTSC video clips are captured by iMovie8 at a mysteriously bloated 6.4 MBps rate rather than the 3.6MBps they should be (must recapture all DV). Apple must retract its claims or fix its products to enable upwards migration.
Nevertheless, having recreated 10 minutes worth of movie in ten days of experimentation and reading most of FCE's 1152-page manual, I have yet to produce acceptable output from FCE. Besides the frustrating discrepancies between the manual and actual FCE4 operation, my biggest problems have been to maintain the 16:9 aspect in iDVD, and to render still images (with modest Ken Burns motion) with any semblance of quality in the final output.
The FCE4 project settings are DV-NTSC Anamorphic 48KHz. Anamorphic video from the PV-GS80 is captured at 720x480pix, 29.97fps, DV/DVCPRO NTSC, 3.6MBps, 16-bit audio, NTSC pixels, Ana=Yes, Field=Lower (even). Stills are imported at 2816x2112pix, 29.97fps, Photo-JPEG, Square pix, Ana=No, Field=None. Motion JPEG is captured at 848x480pix, 30fps, Photo-JPEG, 1.6MBps, 8KHz x 8-bit audio, Square pix, Field=None.
All these media appear correctly in 16:9 aspect within FCE4. However, unlike iMovie8, when FCE4 exports as QTMovie, the movie is not recognized as anamorphic by iDVD, so it is burned in a horizontally compressed 4:3 aspect. Why are there no options or controls when exporting as QTMovie, which seems to be the only way to avoid unnecessary processing and image degradation?
Experimenting with FCE4's Export Using Quicktime Conversion, I was able to export the movie at 848x480, but at a huge cost in time for unnecessary transcoding and the resultant degradation in image quality.
Experimenting with the Anamorphicizer third-party software that this BBS recommends to solve the incompatibility between FCE and iDVD, I found that the anamorphic aspect is recognized properly by iDVD, but still images are now unacceptably stretched horizontally. This seems like a poor solution to a simple problem of incompatibility within Apple's own products.
Most recently I stumbled upon the observation that if a FCE4 sequence begins with a few frames of anamorphic DV from the Panasonic PV-GS80, this sequence can be exported as a QTMovie which iDVD will recognize as anamorphic, resulting in a DVD with the correct aspect. This doesn't always work, e.g. if the audio is removed from those few frames, or if their opacity is set to 0% to hide them. It reminds me of the Auto Conform feature in FCE4, but my Preference/Edit/AutoConform=Ask, and FCE4 has never asked. Furthermore, this works even if AutoConform=Never. Unfortunately, I don't want to start my movie with a DV clip but with a still, and this results in a 4:3 movie in iDVD. Furthermore, this "fix" doesn't seem to stick: after editing, the sequence can revert to 4:3 in iDVD for unknown reasons. I can find no mention of this behavior in the docs, and FCE4 shows no differences in properties between these sequences, so I don't know why it happens. Nevertheless, it seems preferable to Anamorphicizer, because still images are not stretched. Can anyone tell me why this happens so that I can control it predictably?
My biggest remaining issue is that FCE4 renders still images with Ken Burns slow pans and zooms unacceptably poorly. First, some images but not others seem to have gross interlace distortion throughout the clip, as if the JPEG were interlaced. It seems like this problem develops after editing even for stills that once looked OK. Adding the Deinterlace filter merely softens the distorted images. Oddly enough, adding the Deinterlace filter or the Shift Fields filter and then deselecting it seems to fix the problem. I've tried changing the Field Dominance setting on stills from None, but no help. Since the original JPEG is progressive, this seems like an FCE bug. How can I avoid this distortion in the first place?
Finally there is the issue that Ken Burns style pans and zooms create unacceptable aliasing and shimmering in the output, even if the motion is minimal. Easing zooms by changing Scale fast at first then slowing down doesn't help. Easing pans by changing in several steps (because the Center parameter can't have Bezier controls) makes the aliasing even more noticeable by changing the rate of shimmering in discrete steps. When still images contain significant detail and linear edges, there seems to be no level of Ken Burns motion that will result in a reasonable image on DVD. Why are these artifacts so much worse than with iMovie?
As a newcomer to FCE4, I am very disappointed in Apple's failure to ensure a reasonable migration path from iMovie. Perhaps they have forgotten how the basic "bait and switch" strategy is supposed to work! I hope someone here can help more than two hours of hold time with Apple Tech Support helped me. I would be interested in any recommendations for other vendors' products that produce better results with less aggravation. If not, I am about ready to get my money back for FCE4!

"This will explain what you can do about this..."
I shouldn't be required to purchase QTPro just to fix the anamorphic bit in the movies exported by FCE, especially when iMovie8 sets the bit properly. Seems like an obvious FCE bug to me. Tom, any thoughts on why a segment with an anamorphic clip first is handled properly?
"Where are you seeing the image degradation? Are you looking at the output on a video monitor?"
I'm editing using a 21" ViewSonic LCD monitor, but then I burn DVD's to view on an LCD HDTV. The artifacts are apparent on both displays.
" Changing anamorphic values after the material has been edited into the sequence will result in image stretching."
I assume you mean setting the Anamorphic bit on my JPEG stills: I haven't done that. I'm saying that after using Anamorphicizer, some still images were definitely stretched horizontally. I created these by simply dragging a folder of JPEG images to the FCE browser. Other than setting the still duration default, I don't know what else I should do.
"If you add motion to the images interlacing will be introduced. "
I understand, but it is much worse on some images than others, so I'm trying to understand how I can minimize the ugliness of aliasing and shimmering. On some still images, FCE seems to me to have started with two mismatched frames, so that very exaggerated aliasing appears consistently throughout the clip, seemingly independent of the motion. I suspect data corruption in FCE, and I remember a warning in the manual about corruption being caused by copying sequences too many times, but can't find it now. Could this be my problem?
I've also found that even though FCE claims to be a reference editor, not touching the original files, there is a problem with handling portrait versus landscape JPEGS. After importing JPEGs, sometimes the FCE image matches the file in the Finder, and sometimes it doesn't. When it doesn't, I have found that if I rotate the Finder file, Save it, then Rotate it back and Save again, FCE will finally get its version rotated correctly. This never works by only changing the source file one time: I must do it twice.
"If you're uncomfortable or unhappy with the application you might be better off using another one."
I am mostly disappointed that FCE seems to be so out of sync with other Apple apps, and perhaps buggier than many. My guess is that iMovie and FCE are on a collision course instead of a rational product relationship. I would be happy for any recommendations, because I feel that the time I've invested in learning to use this seemingly overly embellished software may not have been well spent. On the other hand, if someone can correct my misunderstandings, I will be very grateful.

Ken Burns/Photo import and editing very buggy

I have had a very difficult time inserting photos into my iMovie project.
First, it seems that sometimes when I click on a photo I've imported on to the timeline without the Ken Burns effect the Photo Settings window will not appear when the photo is selected. If I quit iMovie and restart the window will appear again. Clicking on the Show/Hide Photo Settings button appears to do nothing. Also, if I click on the Show Photo Settings button while the photo is highlighted in the timeline sometimes the preview window will switch to a different photo in a timeline and start looping an arbitrary Ken Burns move onto the new (unselected) photo.
Second, there appears to be no elegant way to move pictures around once they have the Ken Burns effect applied to them. If I need to adjust the length of the clip I get numerous error messages about clip lengths not being correct.
These problems never happen in Final Cut, and I wonder if it's just me or if iMovie is incredibly buggy and unmanageable.
PowerMac G5 2.5DP Mac OS X (10.4.4)

it seems that sometimes when I click on a
photo I've imported on to the timeline without the
Ken Burns effect the Photo Settings window will not
appear when the photo is selected.
Yes, the Photo Settings window seems a bit erratic. It's probably not, actually. Instead of being a standard button, the button should be a checkbox button where we tell iMovie we want it the Photo Settings window to open when photos are selected. Its behavior is consistent with a checkbox button, but since it's a standard button, it appears flakey and its behavior erratic.
Here's the confusing part: When you've been working on a photo with the Photo Settings window open, then click on a video clip -- a clip that's NOT a photo -- the Photo Settings window goes away, as it should. If you later click on an imported photo, or click on a photo in the Photos pane, the Photo Settings window re-appears all on its own.
If, however, the Photo Settings window was NOT open when you clicked on the video clip, the Photo Settings window does NOT re-open later when you click on an imported photo or a photo in the Photos pan.
That behavior appears erratic, for sometimes the Photo Settings window opens when you click on a photo and sometimes it doesn't. It all depends on what you did while editing the PREVIOUS photo/photo clip, but that's not obvious.
If the button were a checkbox, it would simply tell iMovie to open the Photo Settings window as we work on photos or not, just like any other preference. Then the window behavior would make sense.
To add to the confusion, the name of the standard button changes as it should, but offers to "Show Photo Settings" when a VIDEO clip is selected. Nothing happens when you press the button, of course, for a video clip has no photo settings. So once again, the button doesn't appear to function correctly. But it were a checkbox that toggled on/off, we wouldn't expect it to open the Photo Settings window while a video clip is selected.
At the very least, the button should be disabled when a video clip is selected, but it's not.
So the best I can tell, the Photo Settings window opens and closes as it should, but it appears erratic because the user interface is wrong.
Oh, there is one other bug. If the Themes Drop Zone window is open when you click on the "Show Photo Settings" button, nothing happens. The Photo Settings window fails to open.
And one more. The Photo Settings window "sticks" to the project window. If the project window is low on the screen and you place the Photo Settings window above the project window, then close the Photo Settings window and drag the project window up, the Photo Settings window is re-opened off screen. It opens but it doesn't appear to, for you can't see it.
There appears to be no elegant way to move
pictures around once they have the Ken Burns effect
applied to them.
The best I can tell, dragging imported photo works exactly like dragging video clips. I've always found dragging clips a bit clumsy with the timeline in Timeline viewer mode instead of Clip viewer, so maybe that's the problem for you. The trick is to drag the thumbnail above or below the timeline before dragging it left or right.
Except for that, you should be able to simply drag the thumbnail to where you want it in the timeline and iMovie HD will slide clips over to accept it. (Sometimes it's necessary to wiggle the mouse a bit so iMovie HD figures out you want it to scroll the timeline or slide stuff over.)
When dragging a long distance across the timeline, it's sometimes easier to first drag the clip to the Clips pane, scroll the timeline to the destination area, then drag the clip down into the timeline.
If I need to adjust the length of
the clip I get numerous error messages about clip
lengths not being correct.
Hmmm. More specifics please. How exactly are you adjusting the length of the clip? Exactly what error message?
Are you typing a very short time into the textbox of the duration slider of Photo Settings? Yes, that's got a bug that complains when you go less 1 second. The workaround is to drag the slider. (The textbox has been buggy in every version of iMovie. It's simpler to just not use it.)
Karl

Zoom and pan with Ken Burns and then stop and hold the image

Hi all,
I'd like to zoom and pan on a photo with Ken Burns and then stop at the "end" -cropping and hold the image there on my project for a few seconds. Is this possible?

I found a new solution.
I select the ready "Ken Burnsed" photoclip and ctrl-click and choose copy, and then paste the exactly same kind of clip right behind the original. Then i go to the 'cropping, ken burns and rotation'- window, make shure that the start box is on the same crop as the ending of the original clip ( you can switch between start and end crops from the arrow thingy in the corner of the box) , and click crop. There I have the righty cropped stillframe right behind of the original.
I don't know if this is the right method, but it works thanks for everyone for helping, and if you find a better way, please post. I have this thread subscribed.
Message was edited by: AnttiS

Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)

(This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
I found this works great for XP users but unsure of the Vista users. The process is the same for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
I hope this works to your benefit.
Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
(I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)

I would recommend all users having problems try the above solution first.
I have posted this on a couple of websites, and so far it has fixed everyones problems.
Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
I would also recommend you download Shockwave Player 11.
IE8 has tried this as well, but it still has a couple bugs in it.
If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
Those are usually repaired by making sure your computer stays up to date.
The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
If you fall behind on those updates, then you start having problems with your computer and/or software.
One problem then can turn into many and people get frustrated when something all the sudden just quits working.
Take a day or two at least once a month, and make sure you update and maintain your computer.
This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
I would do Disk Cleanup first, then Defrag.
I hope you take this advise into consideration, and that it is very helpful for you.
If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
Thanks and goodluck, from another user like you.

Fix for iTunes and Stuttering Audio Upon Opening Other Programs

This was answered for me in another mega thread, so I thought I would create it's own topic in hopes of helping as many people as possible.
This is a fix for those that have the problem of iTunes 7 working fine alone, but when opening another program such as a game, etc., iTunes 7 begins to stutter and crackle. This fix assumes that otherwise, the program works correctly (gapless, and other issues are not a problem, no blue screens of death, etc.)
First off my machine:
Dell XPS 3.4 ghz Pentium Dual Core
2 Gig RAM
Creative SB X-Fi audio card, latest drivers installed
Observed problem:
Running iTunes 7, audio sounded fine, but opening another program such as UT2004 (first person shooter game) caused iTunes 7 to stutter and crackle.
This was not an issue in iTunes 6.05. I had to upgrade as I just purchased the new Nano.
As an aside, I have another sound card on my computer, an older Layla Echo 24 professional soundcard, drivers are about 3 years old. When selecting this card, this problem does not occur.
The Fix:
Close iTunes 7
Upgrade your sound card drivers (just to eliminate that as an issue)
Upgrade to latest Microsoft direct X version:
http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
Start
Run
Type: dxdiag
Click "sound 1" or similarly named tab
Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
Exit
Restart iTunes 7, and startup music
Open game, or other program
Your music in iTunes 7 should now be stutter/crackle free
This may not work for everybody, but it worked for me so I thought I would pass this along.
Good luck!
(resisting urge to type some snarky remark to Apple that somehow their programmers are indeed as human as Microsoft programmers)...oops...sorry about that.
Dell XPS Windows XP Creative SB X-FI Audio Card
Dell XPS Windows XP

i was hopeful, but it didn't work. well teh one thing that i had to do diff was the dx updating, WGA doesn't like to work on my system for some unkown reason (yes it was bought at a store) so i found a way around their WGA check for it (i think) the one i got was labeled as dxwebupdate for august 2006. it updated just fine and it looks like it should be the same one as the newest update release microsoft sent out
my system is a home built one and haven't had probs with itunes with any other version, until this one. i'm tempted to just go back to the newest version 6 i have, cause this is rediculous. i can't do anything without it sputtering away at me. i tryed uninstalling it and removing every trace of its exsistance off of the system (including registry) and that didn't work i made sure all numbers were set to the correct values for my sound blaster audigy gamer, i was using some non oem drivers, but switched over just to make sure witht eh newest ones creative had, and it made zero diff.
i'm wondering if it is an issue it is having with sound blaster cards...
well anyways if anyone else has any ideas i would like to hear them

Any fixes for drag and drop not working in WAD with IE9?

I have exactly the same issue as is described in WAD Problem - can't modify and Drag&drop in Web App Designer (WAD) doesn't work but unfortunately I don't have the option of going from IE9 back to IE8. Has anybody found a fix for using drag and drop in WAD with IE9?
Edited by: Jason Muzzy on Jul 22, 2011 1:09 AM

Hi Jason,
Thanks for replying .
But I am facing this isssue in Web Application Designer. The link which I have shared shows the behavious of cursor while dragging and dropping
Drop not allowed ("blocked traffic" sign)
Drill across (arrow pointing to the right)
Drill down (arrow pointing down)
Exchange dimensions (exchange icon)
Add to filter (add icon)
Remove from filter (remove icon)
Reorder list (reorder icon).
This issue I am getting in Web Application Designer itself.In WAD 7.X ANALYSIS TABLE do we have any option from which we can disable drag and drop of cells because it is destroying the view of report output .
In WAD 7.X we have option of Activate Navigation in ANALYSIS TABLE but if we disable this our context will get disable and it shows the default Browser context menu.We have not provided any such options so that its original layout will retain back .
The solution they have mentioned to Disable Drag and Drop is not available in WAD ,its available in Analyzer.
Please let me know if you have found any solution for this.

Will Adobe be applying their Premiere CS6 Sync fix for MP4 and WMV exports to CS5?

I noticed that Adobe FINALLY fixed the sync issue for WMV and H.264 MP4 exports in their latest CS6 release. This is very much overdue. Given that all of us who paid good money for CS5 have had to live with this issue for more than a year, will Adobe be applying the same fix for us?

I also never have had any synch issues with WMV and H.264 MP4 exports (or anything else) in any of the CS versions.
I also have never noticed any posts regarding this as an issue either ...so not sure who ..
...all of us who paid good money for CS5 have had to live with this issue for more than a year
...would include.

Any fix for mms and group messaging on iphone4 ios6

Is there a fix for no mms and no group messaging for iphone 4 with ios 6?

what is there to fix, what problem are you having?

Ken Burns photos ~ pan photos with interest at top and bottom?

Hello ~ anyone know how to manage a "long skinny" photo without showing it in "fit" ~ with the black around the edges? I want to Ken Burns them because they are important - but stuck with the pan from the shoes to the head, or the reverse. Love the Ken Burns but it is really limited with that type of Photo. Thanks!

You can add black around the edges of vertically oriented photos with an Automator action called "Pad Images". This has the advantage of letting you batch a lot of photos at a time. You could also add the black space in an application like PhotoShop.
If you need help with Automator, [see this thread|http://discussions.apple.com/thread.jspa?messageID=10702816&#10702816]

Fix for Jaggies and Ripples in Ken Burns Photos?

Similar Messages

Maybe you are looking for