Fix for my Westell 327W15 (aka 327 modem / router)

I had the same issue as other users - who had the Westell 327 router from Verizon DSL - but just upgrading my firmware didn't work. Turns out I had to go in and turn off my MAC authentication. SO, to do this, go to your router page (mine was 192.168.1.1) and enter the username & password, and then go to Wireless Settings --> Advanced Security Settings --> Level 3 - Wireless MAC Authentication --> and UNCHECK the box for Enable Access List. Now both my iphone and ipad work seamlessly with my wireless Westell router.
Note, make sure you update your firmware too - on my D90 model, this is how you do that: go to the Advanced page --> Advanced --> there should be an icon & text saying "Firmware Upgrade" - follow the steps there to get your firmware upgraded.
Hope this saves someone else the 2-3hr headache I had!
Message was edited by: Shannon Funt

I beleive that if you had added the MAC Address of your iPad to the Access List, you would have also had things working.

Similar Messages

  • Any suggestions for an all-in-one "cable modem router print server" (N)

    any suggestions for an all-in-one "cable modem router print server" (N)?

    If that's a problem with your cable company, change the company.
    If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
    If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
    If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
    In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
    You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
    It's like the all-purpose audio device compared to components...

  • Can the Westell A90-750015​-07 modem/rout​er be used as an wireless repeater?

    I am currently using a Netgear router and would like the Westell to act as a repeater to boost the signal.  Is this possible to do and how?

    The Netgear WNR834B can work as a repeater. The Westell 7500 must be the primary router to do this though. Ideally, what you should do instead of repeating a Wireless signal is to use Ethernet to the second router, either through a direct cable run or a MoCa/Powerline Link and set up the Netgear as an Access Point only. You'll maintain Wireless speed and you won't have to deal with WDS.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Which is Best... Connect Devices to Airport Extreme OR Modem/Router? And Which is Best for DHCP/NAT?

    I have a modem/router from the ISP and have just purchased an Airport Extreme to use for the WIFI instead of the modem/router.
    I have 3 other devices on the network connected to the modem/router via ethernet: AppleTV, Smart Blueray Player and a NAS drive.
    So I have the modem/router in DHCP/NAT mode, and Airport Extreme in Bridged mode.
    But I wondered if the Airport Extreme should be in DHCP/NAT, the other 3 devices connected to that via Ethernet, and the modem/router in bridged mode.
    Which is better, or are they the same?
    Thanks

    So I have the modem/router in DHCP/NAT mode, and Airport Extreme in Bridged mode.
    This would be the simplest, correct way to configure your network.
    Unless you need some special feature from the AirPort Extreme....that would require that the AirPort Extreme handle DHCP and NAT service.....like the Guest Network feature......then it would probably be best to keep things simple and leave them "as is" on your network.
    Either the modem needs to be in Bridge Mode and the AirPort Extreme handles DHCP and NAT.....or.....the modem/router handles DHCP and NAT and the AirPort Extreme is setup in Bridge Mode.
    it does not really matter which device handles DHCP and NAT as long as your feature requirements are being met on the network.
    Personally, I strongly prefer to use a simple modem....not a modem/router....and another separate router to control the network. But, your ISP may not offer that option.

  • Westel 327 modem wireless connect problems

    Just bought an iMac with Intel dual core microprocessor. Have been unable to connect to the internet via AirPort despite the best efforts (so far) of both Verizon (DSL) and Apple techs. My iBook has no problems picking the wireless signal from the Westel modem. Also, the iMac is able to connect to the internet via Ethernet (through the Westel)—no problem. Anyone have any ideas or has anyone else experienced problems connecting to the internet via Airport using Verizon DSL and the Westel 327 modem?
    iMac Mac OS X (10.4.7) iMac dual-core Intel microprocessor
    iMac Mac OS X (10.4.7)
    iMac   Mac OS X (10.4.7)  

    Hello all. Please forgive me if I mispost or forget something. I am new to the discussion boards. I recently purchased an iMac and could not connect to the internet by using the wireless on the Westell 327 but could connect if I used a cable. I found a modem firmware update through a link on the Dell website. A Dell wireless card had an issue connecting to the Westell and the link went to the Verizon download site for the firmware update. I could not get it directly from the Verizon site, only by using the link listed at the end of this post. I updated the firmware late last night and just now tried to connect with the Airport and was pleasantly surprised -- It works. I am using the WEP security. Do not forget to place an '$' in front of the WEP key to identify it is a hexidecimal value. Hope this works for you. It did for me. Notice: "Update your modem firmware at your own risk."
    Here is the link: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid =125CFDEB0AFE10E1E0401E0A55174E79&journalid=BC50966C27EA11DB96E995E8363E7F84
    17" Intel iMac   Mac OS X (10.4.8)  
    17" Intel iMac   Mac OS X (10.4.8)  

  • Time Warner Roadrunner Dialer Fix for MAC X 10.5.1 - Leopard Modem

    RR Dialer FIX:
    There is a fix for dialing up with MAC OS 10.5.1 (Leopard). The Road Runner dialer is not compatible and will not work at all, but
    you can use the MAC Networking to configure the Mac dial up capability. Open Network Preferences, select:
    Modem...Advanced...PPP... settings-configuration...
    check off: send ppp echo & check use tcp header compression under Terminal script ... select Script.TXT.
    And then click on connect... this will work ! HTH, NY2LA36
    ======

    Thanks for the your dialer solution. It worked for me after I entered my email address for Account Name. I suspect that not everyone who finds your procedure will realize that they need to make that entry since it isn't the account name.

  • Westell 7500 Wireless modem/router help please.

    Hi, newbie here
    I recently purchased a laptop for the first time in my life and I am trying to connect it to a wireless connection, which I have never done as well. I am using a Westell 7500 modem provided to me by Verizon. I did a bit of researched and apparently (if I'm correct) I don't need a wireless router or any other devices to get wireless internet.
    If I am correct, I went to my modem's IP address and turned on wireless. I set up and changed the SSID and enabled a pass phrase, and I connected to the network at the bottom right. It connects, but there is no internet connection. What I mean by this is that it connects to the device successfully, but there is a triangular yellow warning sign with an exclamation mark on my internet bar at the bottom right and in my "Network and Sharing center" it says "no internet access."
    Am I doing something wrong or do I need to buy an wireless router? Any help would be appreciated, thanks.

    You do not need to buy  a wireless router. the 7500 will do the job! I assume you have windows 7. OPen network and sharing center, manage wirleless networks, do you have any entries for your Verizon  ISP?  If yes delete the entry and go to step 2.
    If no go to desktop and press f1 to bring up help -  search for (Setp 2)  "set up wirless network" and let us know if that works for you. Welcome to the forum
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • Verizon DSL, Westell 6100 modem/router, and Airport Extreme

    Useful info so you won't have to go through what I did.
    Verizon ISP using the Westell 6100 modem/router & Airport Extreme.
    The Westell 6100 was configured during installation as a modem and router with a direct connection to the Mac. You can actually connect Airport Extreme at this point with an ethernet connection to the Westell and it will work, but you can't do any of the sharing things (remote login, personal web sharing, etc.) To do those things the Westell needs to be in the Bridge mode. In a nutshell, you have to edit the Westell's VC configuration to establish Bridge mode, and disable its DHCP server. Then you have to set up the Airport to connect using PPPoE using the Account Name and Password from Verizon.
    1. With the Westell connected directly to the Mac, access the device at 192.168.1.1.
    a. Under VC Configuration the first of seven configurations should already be enabled as VPI 0, VCI 35 using PPPoE. Edit that one and change it to Bridge mode.
    b. Under DHCP configuration, disable the DHCP server. You can also do this under the Private LAN Configuration page. If at the latter, do not attempt to disable the Private LAN (it won't let you anyway). Verizon tech support kept insisting I had to disable the Private LAN, which caused a great amount of anguish!
    c. Before leaving 192.168.1.1 (you won't be able to access it again once the Airport is connected and configured) make sure you know your ISP account name and password. This was assigned during my setup procedure with Verizon, a random selection of letters and numbers.
    2. Now hook up the Airport WAN to the Westell's ethernet port and the Mac to the Airport LAN. Fire up Airport Admin Utility.
    a. Under the Internet tab, select Connect Using PPPoE.
    b. Configure PPPoE using the Verizon Account Name.
    c. Change password to the Verizon account password.
    3. Restart and that's it.

    Thank you for your post. When I moved to another home, Verizon sent me the Westell 6100 and I had been having trouble staying connected to the Internet with my Airport. Last night, I loss wireless access and the Airport status in the menu bar read "Looking for a PPPoE connection". Verizon customer support was able to get me back online, albeit with only a direct Ethernet connection between my iBook and the 6100.
    I found your post and followed your instructions. Now all the iBooks in our household are back online via the Airport. Thank you very much!
    iBook G4 933Mhz   Mac OS X (10.4.7)  

  • FIX for:  no Wi-Fi, reverts to EDGE, or "slow" - using computer as router.

    This is a fix for a special case: if you have a Mac hooked up directly to the internet via cable modem or DSL, and you use the built-in airport to share the connection using "personal web sharing", and your Firewall is on.
    If you turn on Wi-Fi on the iPhone, you may seem to connect (You get the WiFi bars on the phone) but you cannot access internet (or it's slow - cause it reverts to Edge). You may get no IP address on the phone, or perhaps one starting with 169.
    The fix is to turn off "Block UDP Traffic" from the "Advanced..." options of the "Firewall" section of the "Sharing" System Preference panel.
    I think it would be nice to be able to block UDP traffic other than iPhone, but it's all or none.
    I haven't seen this metioned anywhere else, so could someone please pass this along to Apple?
    Good Luck, ell
    G5   Mac OS X (10.4.3)  

    You can pass it along to Apple by posting to this page.
    http://www.apple.com/feedback/iphone.html
    That's the best and most direct way to get the info to Apple.

  • Can Westell 327W DSL modem/router receive wireless signal?

    I have a spare Westell 327W wired/wireless DSL modem/router. I need a wireless access point for a G4 Power Mac away from an Apple Extreme. I knew how to make the Westell 327W in a bridge mode. Is there a way to make 327W communicate wirelessly with a FIOs modem/router?
    Thank you very much.
    Robert

    Hmmm, perhaps something like this with a USB extension cord would be a solution, they have better Range even without an extension than Airport cards ime...
    http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10303&Item=NWTMXP802NU2C

  • Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

    Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
    == URL of affected sites ==
    http://www.hotmail.com

    We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

  • Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

    I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
    Here is a test for my mac.
    EtreCheck version: 2.1 (101)
    Report generated 4. desember 2014 kl. 22.48.33 CET
    Hardware Information: ℹ️
      MacBook Air (Verified)
      MacBook Air - model: MacBookAir6,1
      1 1.7 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1366 x 768
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:12:8
    Disk Information: ℹ️
      APPLE SSD SM0512F disk0 : (500,28 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
      Core Storage: disk0s2 499.42 GB Online
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store
    Kernel Extensions: ℹ️
      /Applications/Parallels Access.app
      [not loaded]  com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
      /Applications/Parallels Desktop.app
      [not loaded]  com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
      /Library/Application Support/Kaspersky Lab/KAV/Bases
      [not loaded]  com.kaspersky.kext.kimul.38 (38) [Support]
      /Library/Extensions
      [loaded]  com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
      /System/Library/Extensions
      [not loaded]  com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
      [not loaded]  com.kaspersky.kext.klif (2.2.1d19) [Support]
      [not loaded]  com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
      [not loaded]  com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
      [not loaded]  com.zg.driver.cdc_ecm_qmi (1.9) [Support]
      [not loaded]  com.zg.driver.cdc_usb_bus (1.9) [Support]
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded]  com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
      [not loaded]  com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
    Launch Agents: ℹ️
      [running]  com.brother.LOGINserver.plist [Support]
      [loaded]  com.google.keystone.agent.plist [Support]
      [loaded]  com.oracle.java.Java-Updater.plist [Support]
      [running]  com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
    Launch Daemons: ℹ️
      [loaded]  com.adobe.fpsaud.plist [Support]
      [loaded]  com.google.keystone.daemon.plist [Support]
      [failed]  com.kaspersky.kav.plist [Support] [Details]
      [loaded]  com.macpaw.CleanMyMac2.Agent.plist [Support]
      [loaded]  com.oracle.java.Helper-Tool.plist [Support]
      [loaded]  com.oracle.java.JavaUpdateHelper.plist [Support]
      [running]  com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
      [failed]  com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
    User Launch Agents: ℹ️
      [running]  ca.indev.MailTagsHelper.agent.plist [Support]
      [loaded]  com.facebook.videochat.[redacted].plist [Support]
      [loaded]  com.genieo.completer.download.plist Adware! [Remove]
      [loaded]  com.genieo.completer.ltvbit.plist [Support]
      [running]  com.genieo.completer.update.plist Adware! [Remove]
      [not loaded]  com.macpaw.CleanMyMac.helperTool.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
      [loaded]  com.parallels.mobile.startgui.launchagent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper  ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      fuspredownloader  ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      nplastpass: Version: 3.1.61 [Support]
      JavaPlugin2_NPAPI: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    userinternetplugins ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      Facebook Cleaner
      Pin It Button
      LastPass
      ResizeMe
      OpenIE
    3rd Party Preference Panes: ℹ️
      Cineform  [Support]
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
      Destinations:
      Data [Network]
      Total size: 3.00 TB
      Total number of backups: 65
      Oldest backup: 2013-08-15 20:20:51 +0000
      Last backup: 2014-12-04 17:20:31 +0000
      Size of backup disk: Excellent
      Backup size 3.00 TB > (Disk size 496.30 GB X 3)
    Top Processes by CPU: ℹ️
           4%  WindowServer
           1%  fontd
           1%  cloudd
           0%  Safari
           0%  launchd
    Top Processes by Memory: ℹ️
      369 MB  com.apple.WebKit.WebContent
      155 MB  Safari
      103 MB  Feedback Assistant
      86 MB  Finder
      69 MB  mds_stores
    Virtual Memory Information: ℹ️
      4.52 GB  Free RAM
      2.60 GB  Active RAM
      652 MB  Inactive RAM
      820 MB  Wired RAM
      1.04 GB  Page-ins
      0 B  Page-outs
    Diagnostics Information: ℹ️
      Dec 4, 2014, 10:37:00 PM  Self test - passed

    [loaded]  com.genieo.completer.download.plist Adware! [Remove]
      [loaded]  com.genieo.completer.ltvbit.plist [Support]
      [running]  com.genieo.completer.update.plist Adware! [Remove]
      [not loaded]  com.macpaw.CleanMyMac.helperTool.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    Your machine is slow because you loaded a bunch of third party junk on it.

  • I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

    I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.  Thanks

    sandyzotz wrote:
    Other wise, I probably best return for a refund and get a Samsung.
    Unlikely.  Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
    Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

  • Type UI in CS6 in Surface Pro 3 is too small.  Adobe needs to isuue a fix for CS6.

    I don't need to upgrade CS6 for any photography reason.  Adobe should make CS6 UI readable fro surface pro 3 users.  They have a fix for later versions.  Why not make it available in other earlier versions of photoshop.  This is not a question of adding new features, it is a question of making the UI readable.

    Mylenium wrote:
    Nobody goes back to fix up a 5 year old software that was never meant to be run on computers that didn't exist back then.
    However good software companies like Microsoft fixes bugs user report on their Current  Software.  Adobe should fix bugs on current marketed software  like CS6 Adobe chooses not to. Microsoft fixed XP till the middle of 2014 years after windows 7 and win 8 were current.   Bugs go unfixed in Photoshop release after release. Adobe Program support continues to be sub par year after year.
    Currently there are three CS6
    perpetual Mac version 13.0.6
    perpetual PC version 13.0.1.3
    subscription version 13.1.2 PC and Mac

Maybe you are looking for