Fix for "Search for Sensor"

For the 2nd gen iPod nano verson 1.1.1 will work with nike+ipod sport kit. When you begin your workout it will ask you to walk around and so it can detect the sensor but what you have to do is hold it in your hand and kind of lightly shake the sensor while each few shake push the sleep button (just a quick tap, don't hold it in for 3 secs) and it should work after that...
I was getting pretty ****** off until i finally did that

Thanks for this; I was getting ready for a very cranky visit to the local Apple store. It took a few times shaking it--about one minute of shaking/clicking/shaking/clicking--but then it worked like a charm. For me, this was a first-time-use-only thing. I wanted to make sure I didn't have to go through this ritual every time I put the sensor to sleep (I guess you don't really have to put it to sleep, but I think it might save battery life). I checked by putting it to sleep, then just waking it up normally (i.e., one quick push with a paperclip, no shaking it around), and it works great each time, right on cue.

Similar Messages

I need autocomplete for search for words in a txt. file

i am not so good in java.
I have a running code for search in text with a txt. file (from user bluefox815).
But I need a solution with autocomplete for search for words in a txt. file.
test_file.txt (Teil des Inhaltes):
Roboter robots
Mechatronik mechatronics
and so on
Can you help me please.
Here is the code:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
* this program searches for a string in a text file and
* says which line it found the string on
public class SearchText implements ActionListener {
private String filename = "test_file.txt";
private JFrame frame;
private JTextField searchField;
private JButton searchButton;
private JLabel lineLabel;
private String searchFor;
private BufferedReader in;
public SearchText() {
frame = new JFrame("SearchText");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
searchField = new JTextField(80);
searchButton = new JButton("Search");
// this is used later in our actionPerformed method
searchButton.setActionCommand("search");
// this sets the action listener for searchButton, which is the current class
// because this class implements ActionListener
searchButton.addActionListener(this);
lineLabel = new JLabel("nach dem Fachbegriff suchen");
public void createGUI() {
JPanel topPanel = new JPanel();
topPanel.setLayout(new BoxLayout(topPanel, BoxLayout.X_AXIS));
JPanel bottomPanel = new JPanel();
JPanel mainPanel = new JPanel();
mainPanel.setLayout(new BoxLayout(mainPanel, BoxLayout.Y_AXIS));
topPanel.add(searchField);
topPanel.add(searchButton);
bottomPanel.add(lineLabel);
mainPanel.add(topPanel);
mainPanel.add(bottomPanel);
frame.getContentPane().add(mainPanel);
frame.pack();
frame.setVisible(true);
public void actionPerformed(ActionEvent e) {
// now we get the action command and if it is search, then it is the button
if ("search".equals(e.getActionCommand())) {
searchFor = searchField.getText();
searchTheText();
private void searchTheText() {
// I initialize the buffered reader here so that every time the user searches
// then the reader will start at the beginning, instead of where it left off last time
try {
in = new BufferedReader(new FileReader(new File(filename)));
} catch (IOException e) {
String lineContent = null;
int currentLine = 0;
// this will be set to true if the string was found
boolean foundString = false;
while (true) {
currentLine++;
// get a line of text from the file
try {
lineContent = in.readLine();
} catch (IOException e) {
break;
// checks to see if the file ended (in.readLine() returns null if the end is reached)
if (lineContent == null) {
break;
if (lineContent.indexOf(searchFor) == -1) {
continue;
} else {
lineLabel.setText(String.valueOf(lineContent));
foundString = true;
break;
if (!foundString)
lineLabel.setText("Es kann kein Fachbegriff gefunden werden.");
try {
in.close();
} catch (IOException ioe) {
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
new SearchText().createGUI();
}

Markus1 wrote:
But I need a solution with autocomplete for search for words in a txt. file.What is your question? What have you tried so far? What are you having difficulty with?
Mel

Tell me Logic for search for duplicate words(or strings) in a large file.

Search for duplicate words (or strings) in a text file containing one word per line. For each word that occurs more than once in the flat file output should be as follows
<word> <number of occurrences> <line numbers in the file where the word occurs>
For example, if the word Hello occurs thrice in a file at lines 100, 178 and 3456 the output should read
Hello, 3, [100, 178, 3456]

Incidentally i wrote similar code some days back. You need to do some modifications to get the exact output you want, but i hope it will be of some help.
One more thing its written using JAVA5
public class Test
     private static final String COLLECTIONS_TEXT = "C:\\Documents and Settings\\amrainder\\Desktop\\Collections.txt";
     public static void main(String[] args) throws IOException
          findDuplicateWords();
     private static void findDuplicateWords() throws IOException
          Collection<String> words = new LinkedHashSet<String>();
          File file = new File(COLLECTIONS_TEXT);
          StreamTokenizer streamTokenizer = new StreamTokenizer(new FileReader(file));
          int token = streamTokenizer.nextToken();
          while(token != StreamTokenizer.TT_EOF)
               if(token == StreamTokenizer.TT_WORD)
                    words.add(streamTokenizer.sval);
               token = streamTokenizer.nextToken();
          System.out.println(words);
}Cheers,
Amrainder

JSP/Servlet code for searching for Domain availability

Hi Guys
I am giving a service on my homesite which will search for the domain availability. Users will enter the domain name and the code should check whether the domain is already taken or it is available for registration
Please help me out.

Nah, I don't have one myself. WHOIS can work but only for .org, .net and .com (and a few others here and there.) In that case, all you'd have to do is run the command, and look for the text which says it isn't registered..
trejkaz@carroll:~> whois gnifodgjidfo.com
[whois.crsnic.net]
Whois Server Version 1.3
Domain names in the .com, .net, and .org domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
No match for "GNIFODGJIDFO.COM".
Last update of whois database: Sun, 25 Nov 2001 16:58:31 EST <<<The Registry database contains ONLY .COM, .NET, .ORG, .EDU domains and
Registrars.

Utility VI for searching for the occurance of a string in all files in a directory

Is anyone aware of a utility VI that can search for a string(s) in all
file types such as doc, xls, ppt etc in a specified directory?

Greetings,
I'm having an issue (using 8.5) with a directory read in. I've attached my elementary VI. Basically I want to read in mutliple files (they will be the same array size), and analyze each file. I am confident I will be able to analyze the data as necessary, I'm just having a problem parsing the data. Verbally I know exactly what I need to do just doesn't seem to be working in labview. Reading in the directory isn't the hard part, but breaking up the 2D data into the number of files I have apparently is for me.
1. Read in (user defined) directory
2. List the file names | # of files in the directory
3. Perform MAX value and % analysis of data on AMP array
Any help would be greatly appreciated. Even if it's just verbally pointing me in the right direction. I've attached the VI and 3 example data files I read in.
Thanks in advance...I really feel like I should know this one, but I usually deal in individual files, this is my first directory read.
Best Regards,
Chazzzmd
Attachments:
labview text upload.zip ‏33 KB

Fix for "Searching for Sensor"

For the 2nd gen iPod nano verson 1.1.1 will work with nike+ipod sport kit because the version 1.2 is referring to the 1st gen ipod nano only. When you begin your workout it will ask you to walk around and so it can detect the sensor but what you have to do is hold it in your hand and kind of lightly shake the sensor while each few shake push the sleep button (just a quick tap, don't hold it in for 3 secs) and it should work after that...
I was getting pretty ****** off until i finally did that

You might have a defective sensor.
When I begin my workout, if I get the "walk around" message, all I have to do is take a couple of steps (with the sensor in my shoe) and it activates.
If I had to take it out of my shoe and shake it, I probably would be pretty honked off, too!

Inbox Search - Remove "Due date" for search for date

Dear experts
We'd like to remove the value "due date" from the dropdown box "Date type" in the agent inbox search.
How could we achieve that?
Thanks in advance
Stephanie

Thanks Raj.
When I display the page AuiSearch.htm, I can see the coding for this dropdownbox:
        <crmic:dropdownListBox id                = "DlbDateType"
                               table             = "<%= controller->G_Datetype_DD %>"
                               nameOfKeyColumn   = "valpos"
                               nameOfValueColumn = "ddtext"
                               selection         = "//SearchAuiItems/DATETYPE"
                               width             = "100%" />
However, I don't want to remove it. Currently the dropdownbox contains 2 values:
"Created Date" and "Due Date".
I would like to have only "Created Date".
Thanks in advance
Stephanie

"Search for Jobs" link not working in E-Recruitment

Hi,
Whenever Employee/External Candidate clicks on the link "Search for Jobs" on the start page, list of jobs are not getting displayed despite after data is available.

Hi ,
Go to SPRO-personnel management-Employee self services-homepage framework - resources-edit resources
select the resource for Search for job .... and check if the URL path is given.
Thanks
Sunitha

BAPI to search for customer

dear all
Iam search for a BAPI to be used in search for particular customer using one of its attribute wich is stored in kna1 table
and also search in its details stored in ADRC taple if possible.
and also BAPI for search for equipment using one of its attribute like serial number or sold to party .
thank you

Hi lamey,
the function module BAPI_HELPVALUES_GET has exceptionally good documentation.
Please read it an makle use of the IMPORTING and TABLES parameters to get what you want:
*" IMPORTING
*"     VALUE(OBJTYPE) LIKE BAPIF4A-OBJTYPE DEFAULT SPACE
*"     VALUE(OBJNAME) LIKE BAPIF4A-OBJNAME DEFAULT SPACE
*"     VALUE(METHOD) LIKE BAPIF4A-METHOD
*"     VALUE(PARAMETER) LIKE BAPIF4A-PARAM
*"     VALUE(FIELD) LIKE BAPIF4A-FIELD OPTIONAL
*"     VALUE(EXPLICIT_SHLP) LIKE BAPISHLP STRUCTURE BAPISHLP OPTIONAL
*"     VALUE(MAX_OF_ROWS) LIKE BAPIF4A-MAX_ROWS DEFAULT 0
*"     VALUE(DESCRIPTIONONLY) LIKE BAPIF4A-DESCRIP DEFAULT SPACE
*" EXPORTING
*"     VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
*" TABLES
*"      SELECTION_FOR_HELPVALUES STRUCTURE BAPIF4B OPTIONAL
*"      HELPVALUES STRUCTURE BAPIF4C
*"      VALUES_FOR_FIELD STRUCTURE BAPIF4D
*"      DESCRIPTION_FOR_HELPVALUES STRUCTURE BAPIF4E
EXPLICIT_SHLP can be used to specify the search help
SELECTION_FOR_HELPVALUES can be used to specify complex selection criteria.
Read the genreal documentaion and the parameter documentation, it has many hints for you.
Let us know if successful, Thank you.
Regards,
Clemens

Search for BAPI to access it throw Java pro gramme

dear all
Iam search for a BAPI to be used in search for particular customer using one of its attribute wich is stored in kna1 table
and also search in its details stored in ADRC taple if possible.
and also BAPI for search for equipment using one of its attribute like serial number or sold to party .
which i can access it in my portal .
thank you

Hi Ahmed,
Have a look at the below link, some example bapi names are mentioned here -
http://www.sapfans.com/forums/viewtopic.php?p=648307
Also, there are no. of bapi's uses kna1 or adrc table so, you better search on specific requirement on sdn.com.
Regards,
Sen

Itunes 11.1.4 crashing while playing podcast/and it is search for the latest podcast show!

I launch iTune 11.1.4 and then select on of unplayed podcasts. It starts to play it, and in mean time I click the button to check for searching for new shows! It starts the search, but iTunes just quites for no reason! No error messages, only the window to reopen it appears! Sometimes it quits after I start listening a pocast show too! Is anyone having this problem?

I've had this exact problem for about 2 weeks. neither my iphone 4s, ipod touch, or any of my friends iphones and ipods wont even show up in itunes. i click Sync the file column and its greyed out not detecting anything. all apple did was say "reinstall" it. i did about 3 times before calling.... then they said check to see if its all up to date. which everything is. they had nothing else to say.
also since iOS 7 came out my iphone 4s wont connect to wifi. that option is just greyed out. my battery can go from 100% and untouched unplugged and sit on my desk for an hour and itll somehow be at 23% battery. apple gave me a new phone and did the same exact thing. idk what theyre doing over there.

Satellite M35: Configfree search for wireless devices

I have a satellite M35. The icon for search for wireless devices in configfree stopped appearing in my desktop.

Hi Enrique,
you could look up if the Configfree software is already installed on your unit. You can then create a new shortcut on the desktop by right clicking the "cfmain.exe" program. It should works now!!
or
you deinstall the software and re-install it from your Toshiba Tools and Utilities CD. If you do not have the CD, you can download the newest Version from Toshiba Amerika
at http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
(I think the Satellite M35 is an US product)then do a reinstall of the software.
I hope this will help you.
cu Sammy23

Automatic search for wi-fi connection

The moment i unlock my cell it asks for searching for wi-fi availability. The messsage appears Search for WLAN. Though i have tried changing settings through Menu>Settings>connection> WLAN but the problem persists. Can we avoid getting this notification again n again.

Go to settings > connectivity > wlan > options > settings > show wlan availability > never, before that remove the wlan widget from the homescreen.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

I have mac osx 10.6.8 and I keep getting update notices that do nothing, just search for update server. Happens every day. What can you or I do to fix this?

I have mac osx 10.6.8 and I keep getting update notices that do nothing, just search for update server. Happens every day. What can you or I do to fix this? Other people I work with and use macs have the same issue.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

'''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
http://www.mozilla.org/en-US/firefox/all-older.html
check the system requirements:
http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
see also:
[https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Fix for "Search for Sensor"

Similar Messages

Maybe you are looking for