Fix for Sony Z2 users with Elements Premiere

I have a new Sony Z2 series laptop and just purchased Adobe Photoshop and Premiere Elements 10. They both installed fine and run with no problems. BUT...if you use the Sony Power Media Dock (PMD) which comes with the Z2 laptop and is used to hook up 3 additional monitors, you will encounter a Windows error message when trying to open a project in Premiere Elements. The error message is generic and says Premiere has encountered an error and will then close. I called Adobe tech support, but after holding for over an hour, I hung up.
Upon doing further research, I found that Sony has released a new video (GPU) driver *unofficially* and is only available for download from the German website via a direct link. I found this info at NotebookReview.com in their Sony forum. I'm providing a link directly to the thread which includes the new driver download link:
Click here to view the thread and download link
After installing this new driver, Premiere works perfectly. Hope this can help out others and hope Adobe will add this to their knowledge base. The Sony Z2 series is a relatively new model, so I'm suspecting this issue to come up more in the future.

Hi pilotbroth,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Are you running a POP3 account? as POP3 only really shows a copy of what is in the inbox, outgoing would only show if say you used Exchange or IMAP4 based accounts.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

HT204210 Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
We are seeing this with 10.10.2 fully Apple-SUS updated machines.
Feedback has been sent to Apple over this as well.
Im recommending:
a. turn off FV2 until such time as a Apple provided update cures it
b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability)

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

Fix for the Identity change with Siri

After trying all different ways to sync my phone and my wife's Iphone through the cloud sharing contacts and calenders, I think I have the fix for the identity change that Siri does. I turned off the contact sync on iCloud and it stopped swapping identities. I think that sharing contacts makes the iCloud think there is only one user. Downside of the cloud but not worth the hassle factor. I will sync contacts through iTunes.

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

Official news on a fix for those of us with issues with ios4 and 3g?

Hello all I'm new here on the forums waves
I have recently upgraded to iOS4 on my 3g and am one of the unfortunate to experience a downgrade in performance and major increase in heat(very concerned about the heat issue).
I have noticed a lot of people around different forums venting about this issue which is very understandable but...What I want to know is, does anyone know or have any official info on weather apple are releasing a fix for these problems? I know that the 3G is now been discontinued but surely they need to do something about this?
Thanks

Hey all thanks for the replies
Sorry wasn’t trying to get people to speculate more trying to get some official facts in the hope someone had seen some sort of news from apple.
I really hope they care, I am thinking of getting me a Mac but if they are like this with "old product"...I mean I know it’s a very old product and they are concentrating on newer products, but I for one can't upgrade for the foreseeable future and I’m sure many other are in the same boat it would be nice to know they still care about keeping us out dated owners happy just for a little longer until we can all upgrade! =(
I did try the rest thing and I think it may of help the problems slightly...still getting extremely hot with basic things though...
Thanks again for the replies

Possible fix for some dlink routers with wifi issues

I found something online that stated that if you turn off a feature called WMM that it can help or fix some wifi issues, and on my dlink dir-268 it seems to be working. Now without this feature turned off I could connect to my wifi but not much else, with it off I have checked websites online and also for the first time been able to download a 300MB+ file. I dont know if it is still used on the newer dlink routers but it could be at least a temp fix for some. For my router it is located under the advanced/ advanced wireless settings
Please post your results if you find this feature on your router, and list what model you have and if it worked so if it fixes problems for enough people mabe we can let dlink know of this find. could help in getting a fix out for the router firm ware or mabe even the android os.

Wouldn't really be a fix... more a workaround. However...
Both my Plus account, and a free test account I set up, don't have reliable push... so I think the problem is a little more complex than this.
While there has been a theory that free accounts work (which I have not experienced), I don't think Apple or Yahoo have ever stated that push was only intended to work for free accounts...

Fix for WebHelp output issues with IE 11 breaks Search function

I use RoboHelp HTML 9 and have been having issues with generated WebHelp in IE 11. The TOC was totally blank and the Search tab looked fine but did not function. Everything worked fine in Firefox. After much experimenting and online research in these forums and elsewhere, I have been able to get the TOC to display properly in IE 11 (and Firefox) but the fix has caused the Search tab to stop functioning as per this other forum post RH9 Webhelp Search function is not working properly.
I need to have BOTH TOC and Search displayed and functioning properly but in order to get the TOC displayed properly I had to change the Preferred Format setting to "Pure HTML" and, according to the post mentioned above, that is what messes up the Search function. Is there a solution that will allow both TOC and Search to function properly?
Here is a summary of the steps I have taken to get to this point:
Tested WebHelp output from two different projects of my own as well as the Salesbuilder starter project - all would display/function properly in Firefox but not in IE 11 (blank TOC and non-functioning Search).
Found a "patch" for RH10 for the exact problem I was having with RH9 but was not able to find a version for RH9. Since the patch included 2 files (whutils.js and whver.js) only, I backed up these files in the RoboHTML\WebHelp5Ext\template_stock directory and replaced them with the new ones.
Regenerated one of my RoboHelp projects - still didn't work in IE 11 and now didn't work in Firefox either!
Tried turning on Mark of the Web but this did not help and would not allow opening PDF's which is necessary to one of the projects so I turned it off again.
Changed Preferred Format setting to "Pure HTML" instead of "DHTML" and the TOC displayed and functioned properly in IE 11 and Firefox! Hurray!!
Celebrated for 10 seconds until I clicked on Search tab and saw the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index but neither of my projects uses an index and I have not generated one in either project.
Found the post mentioned above which states that the solution is to change the Preferred Format setting back to DHTML but when I do that I am back to blank TOC and proper-looking but non-functioning Search!!!
I have now removed the Search tab from the output of one of the projects since it is not really necessary but I need to find a fix for this for my other project.
Both of my projects are run locally - one is release documentation that is distributed on a CD and the other is CSH which is loaded on the local server with the software for which it was created.
Dorothy
Note to Administrators: Sorry, but I originally posted this as a reply to a previous post - Contents, Index, & Search do not display in generated help... - so perhaps it should be removed from that thread to avoid confusion.

The "preliminary" fix provided has worked perfectly! All versions of my WebHelp project now display TOC properly and I was able to change the Preferred Format setting back to DHTML so the Search tab both displays and functions as it should. I am very grateful to William for providing this fix which works in both IE 11 and Firefox. Someday I will pursue the fixes to make it work in Chrome as well.

Fix for music playback problems with new iTunes (11.1)?

When playing music from my library using the latest iTunes update (11.1), the audio will pause every so often, maybe every 2-3 minutes, for just a couple of seconds - I tried to reinstall and the same problem occurs. Is there a fix for this? I am running OS X 10.6.8 on an iMac.

Maybe
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010

Installation issue with Elements/Premiere 12 bundle

I haven't been able to install the Elements/Premiere 12 bundle I recently purchased at a Best Buy Store. The installation screen says invalid serial number when I entered the serial number on the back of the box. I also tried using the included redemption code to request a serial number, and got an invalid redemption code response.
Using Windows 8.1, Dell XPS 8700, and turned off the Anti Virus during installation.

there's no serial number/redemption code on the outside of any adobe product boxes (except some older products had a number under a sticker so you could determine, before purchase, if there had been tampering).
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

Fix for SOLR searches beginning with wildcard?

All, I am having problems finding clear answers on if the above was corrected in ColdFusion 10.
I can't get my head around the idea of SOLR not allowing search criteria to begin with a wildcard. I've seen a solution for reverse wildcard searching, which is great as long as I specify criteria for which I know the ending letters. For example, if I am looking for all entries ending in "ing", I could do a search on "*ing", using the reverse wildcard to find "gni*". I have yet to see, or come up with, a solution for a SOLR search with wildcards in the start and end of the criteria. For example, lets say I am looking for any word with "fus" in the middle, such as "confusing" or "perfusing" or "profusely". I would want to do a search such as "*fus*". From what I understand thus far, this cannot be done in SOLR?
Thanks,
Tom

ColdFusion will support whatever Apache solr supports as it is the underlying engine we are using.
And Solr does support it: http://lucene.apache.org/solr/api/org/apache/solr/analysis/ReversedWildcardFilterFactory.h tml
I think this is an egregious hack, but still, it's the way they've chosen to support it.
Solr technically disables support of leading wildcards by default in the traditional query parsers due to concerns about query performance since it tends to select a large percentage of indexed terms.
Be that as it may, this should be my decision, as the maintainer of the index, not your decision to blanketly disallow it. If it's available, then one can use it if one choses, or not use it for the reasons you cite. If you blanketly disallow it, you're removing the ability for me to make that decision.
It's also a bit of a backwards compat issue, innit? Verity allowed leading wildcards.
Adam

Any fix for CC render issue with the new MacPro Firepro D700. Getting lines and flicker as documented in threads

Hi,
We're facing some critical problems with our new MacPros, CC, and the Firepro D700's. It appears that after we upgraded to 10.9.3 the D700's no longer work with Creative Cloud. Our Premiere renders are full of artifacts, lines, and drop out. Same issue as documented in RENDER PROBLEM - AME and Premiere Pro CC causing random horizontal lines on H.264 Renders Can you advise as to when the fix will be pushed? We have turned to "software only" render, which is killing us for time. We have a huge amount of work that goes through 4 edit bays and its putting us days behind.
Please let us know,
Sincerely, Jim Janicek
Janicek Media, Inc.
720-891-6276
[email protected]

You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Also, this is an OPEN forum, not Adobe support... please do not post personal information

Is there a fix for an InDesign file with error code 3?

I have: reset preferences, exported to older file type, opened it on a different machine, etc. Everytime I try to click a page at the beginning of the document, ID crashes and has to reboot. CS6.

Sorry to hear that. Yes, we may be able to assist! Here is a little more info on how we will do this - Markzware InDesign File Recovery Service:
http://markzware.com/support/faq/recover-bad-file-service/
Troubleshooing may help and here are some tips:
Just like a doctor can not always say what caused the symptoms, they can offer best advice standards for prevention. For instance, the typical items such as; system up to date along with all software used in the process, enough hard-disk space for scratch disks, etc.
It is hard to say what actually caused your InDesign file to go corrupt, but it comes down to these likely causes:
* Corrupt Font(s) (or corrupt font caches - see below)
* Corrupt Image(s)
* Power Failure
* Placing images via drag-and-drop from an Internet page
- Watch: http://www.youtube.com/watch?v=aLM08sT_F3U
* Copying and Pasting Images from Word, PowerPoint, etc into InDesign
- Watch: http://www.youtube.com/watch?v=WSS0Llx4VEs
* Copying and Pasting text from Word, PowerPoint, etc into InDesign
* Working on an InDesign file over a network or on a remote server
Here is a video on how to tackle the font caches of InDesign, which is good to do once and a while anyway:
http://www.youtube.com/watch?v=Nf5ZuiaYgus
For checking individual font files (fonts are like mini apps really), we recommend either FontExplorer XPro or Extensis Suitcase Fusion 4, with the later perhaps the more popular of the two.
Deleting your InDesign preferences can also fix some odd issues. To delete the InDesign Preferences hold down shift+option+command+control on Mac or shift+ctrl+alt on WIndows while starting up InDesign.
Hopefully this assists.
Friendly Regards,
David Dilling
Markzware

Fix for Sony Z2 users with Elements Premiere

Similar Messages

Maybe you are looking for