Fix for Thunderbolt OTA firmware update , when receiving an error message
Hi, my name is Lou, and I'm not sure if this is the right place to post a solution or fix for Thunderbolt users that are unable to get their firmware update OTA..
For the last 2 weeks, when i got word that the (OTA) Over The Air firmware update should be coming out, i started going on my phones setting to check for new updates and started to receive an Error message, stating to check back when service was available, well Verizons attempt at fixing the issue was to to a hard factory reset, which didn't work, they also had me go to the local Verizon Wireless store and switch out my SIM card, and that didnt work, and they also tried Forcing the update to y phone, and again No resolve.. There last solution was to send me a refurbished phone, which I am strongly against, cuz I dont want a used piece of equipment, ... well anyways, I found the solution for the fix of getting the update downloaded to your phone, from www.thunderboltforums.com ,
You first need to downlaod an app from the market titled LTE On/Off app, install it. Once installed, I turned of my WiFi on the phone, then opened the LTE On/Off app, and rememer the original setting that its on, bcuz thats the setting u will have to set it at, when your update begins... Select the CDMA mode, not the CDMA(PRL) mode... then exit the app.... By selecting the CDMA mode only, this should make your either 3G or 4G signal switch to a 1X symbol.. then, i restarted my phone, .... i dont think restarting is necessary, but i did it anyways... when it restarted, the signal setting was still at 1X, then I went to setting, aSoftware Update, then Check Now, and within a minute or so, the Download option appeared. once I started the downlaod, I let about a minute pass by, then I went and opened one last time, the LTE On/Off app, and switched the setting to its default setting, and mine was the 4G option and the 4G signal kicked in, and the 78Mb download completed within 3 minutes... hopes this helps... It helped me...
I could be wrong but I believe this has been covered but thanks for sharing still...
Similar Messages
-
When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. Will I lose everything if it goes back to factory settings. Right now my phone wont do anything. It is just showing a cable, an arrow and the iTunes logo.
If you restore from backup.
You should have made sure that everything was on your computer bef ore updating anyway. Did you fail to do that?
All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc. Did you fail to do that? -
Any suggestions as to what to do?
I'm running Windows 8.1 and it happens both in the 32-bit and 64-bit applications
TomYou can find the latest updates for CS5 here: Adobe - Photoshop : For Windows
You can download and install those updates if you have not already.
CS5 is no longer sold or supported, so will not be getting new updates.
Since I'm a volunteer and not an employee, I can't say when the server will be online.
Gene -
That's all the details I have!
You will need to create a new profile if you didn't create one for the 4.0 beta version.
See:
http://kb.mozillazine.org/Profile_Manager
[[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Thunderbolt display firmware update 1.2 won't install correctly
On Friday 11/13/2014, I received a Software Update notification in OS X Yosemite 10.10.1 that there was an update available for "Thunderbolt Display Firmware Update 1.2". I tried installing this several times, but every time it tells me "The Thunderbolt Display Firmware Update could not complete." Now I have 6 failed install attempts showing in Software Update, plus still the still to be installed update itself.
If I click on the "More info" button in the failed installation message, it takes me to this page: About Thunderbolt Display Firmware Update 1.2 - Apple Support
On that page it suggest to check the "About this Mac" info for Thunderbolt Display, where "The Firmware Version should be 26.2 and the Port Micro Firmware Version should be 2.0.7 after the update."
My Thunderbolt Display is currently on Firmware Version 22.2, with Port Micro Firmware Version 0.0.21. Why won't this update install?I had a similar problem: The "Thunderbolt display firmware update 1.2" kept reappearing in AppStore, even though the uppdate seemed successful.
According to Apple[1] the update was successful when the the Firmware Version is 26.2 and the Port Micro Firmware Version is 2.0.7 (visible in About this Mac -> SystemReport).
Above versions were correct in my case, but the update still kept appering in AppStore... (probably I did download and install the update manually after the first failure, but I don't remember ...)
To get rid of the annoying update in AppStore I used the softwareupdate command[2] on the commandline:
softwareupdate --ignore TBdisplayFWUpdate1.2
[1]: https://support.apple.com/en-us/HT204450
[2]: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/softwareupdate.8.html -
I was trying to update itunes on my computer that has windows vista. during the update I received an error message; so I uninstalled itunes and reinstalled it. the instatlation process stopped with this message: "Service 'Apple Mobile Device' failed to start. Verify thta you have sufficient priviledges to start system services." I have used an ipad 2 since 2011 and have never had a problem with my itunes account or my ipad until now.
What steps do I need to complete to get my itunes account up and running again?Hi Kayleenfromwi,
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying the steps in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?
Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.
-
I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.
AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?
Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?
It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.
-
When opening the Coloursync utility and pressing the verify button, I received an error message (copy below) stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?
Checking 25 profiles...
/Library/ColorSync/Profiles/Displays/iMac-00000610-0000-9C6C-0000-000004271B00.i cc
Tag 'cprt': Text tag has an incorrect length.
The file is locked. Could not be fixed.Hi guys,
I followed the steps to unlock the .icc file in the "getinfo" screen then went on clicking repair in colorsync utility.
This is the message i got:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
Tag 'cprt': Text tag has an incorrect length. Fixed.
Repair done - 1 profiles fixed.
However, when i hit verify again it shows up like this:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
Tag 'cprt': Text tag has an incorrect length.
Verify done - found 1 bad profile.
... and it keeps like this sine die.
when i open the .icc file it shows up like this:
3 'cprt' 'text' 35 Copyright ASCII Text String
New to mac so I really don't know what to do.
I didn't get this message so far. What i did before getting this message was to open a jpeg file. I wanted to edit it so when i did right click on the file i went to open with, and colorsync came as an option; so i chose it.
Then this message started comming up.
Is there anything i can do?
Thabks for the support. -
Thunderbolt Display firmware update 1.2 failed
Thunderbolt Display firmware update 1.2 fails to complete. I have made four attempts to load this software update. The odd thing is that the software list shows that the update has been installed. But every time I check for updates, Thunderbolt Display firmware 1.2 is listed as a needed update.
Strange. The downloaded dmg file package said that the upgrade was successfully installed, but the App Store still says I need to update. I haven't tried it with my MBP cover open but I'll give that a shot.
Thanks,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
hi i when i am trying to update my ipad to ios i receive an error message 4005 please help.
Read through this for solutions to error 4005:
http://support.apple.com/kb/TS3694
Maybe you are looking for
-
Mail attachments Icon not showing in list
I have just noticed that when a email message is received it doesn't show the paper clip icon in the attachments column until after the message window has been opened then closed. This is a worry as I normally discard messages from unknown sources th
-
Different ways to create an object
Hi All, I am a new bie to java programming. I know the way to create an object for a class will be something like A b = new A(); // A is the class name and b is the object name. But i am not sure what the following code means, I know it is also creat
-
Unicode complaincy check for ABAP included in Start Routines
Hi, we are planning to run unicode conversion for BW and we have tried to analyze our system with UCCHECK transaction to make sure that ABAP would be complaint with unicode. It's mentioned in documentation that this transaction is only capable of exe
-
Hi In dialog programming if i enter the vendor code and press enter then it should automatically display the vendor name. how to do this. Thanks, Madhu
-
I am not 100% sure how I actually got this issue but its really bothering me. I have some adware on my mac that is causing random text in any browser I use to turn into spam links and ads. I have tried to use the methods posted on thesafemac.com but