Fix for Windows 7 64bit Install Trouble

This is regarding the failure of iTunes 10.5 to install. Windows gives message stating Package is Missing some components, or something like that. I found that my Apple Updater product was not installed, only downloaded. I installed the Updater (by looking under Programs, All Programs, Apple Product Updater, and installed it. It then immediately went out, found iTunes 10.5 and Im good to go.

See
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Similar Messages

Need to find a fix for Windows XP 64bit

I just don't understand how apple has negeleted to make a download version of Itunes to work with Windows XP 64-bit OS. It seems to me that I'm not the only one here that feels the same and has had issues installing Itunes on there machine. I just purchased a new machine over the weekend to find out that Itunes doesn't work. No where in the specifications of the IPOD touch does it say it doesn't operate with Windows XP 64bit. It just says Windows XP. Is there going to be a fix for this? Let me know if any one has found a solution to this matter.

Apple has never supported the 64-bit version of Windows XP, and at this point probably never will since Microsoft themselves are dropping support for it. If you search the iTunes for Windows forums for "XP 64", you'll find threads discussing how people have managed to "crowbar" the version of iTunes for 64-bit Vista and WIndows 7 to XP 64, but the level of success has been less than 100%.
There are third-party utilities such as MediaMonkey, Anapod, Ephpod, or Xplay for handling transfer of content to your iPod . I haven't used any of these, so I can't make any recommendations. These applications cannot connect to the iTunes Store, so you will not be able to purchase content from the Store. The applications may also may not work with the most recent iPods, so confirm compatbility with your iPod model.
Upgrading to Vista or Windows 7 will probably be your best option for the long term, though.
Hope this helps.
Good luck.
Message was edited by: Dave Sawyer

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

Help with Drivers for HP dv8315nr for Windows Vista 64bit

Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't work either.
My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
I appreciate the attention for this manner. Thank you
Jorge

I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
thank dr_lynch

Tecra A11-11H - Drivers for Windows XP 64bit

Hi,
does anyone know where can I find the driver for the wireless card of Tecra A11-11H using Windows XP 64bit, does anyone have a full list of the hardware models Tecra A11-11H using as toshiba support website doesnt have driver for Windows XP 64bit.
Many thanks

Hi buddy,
Windows XP 64bit is not supported by Toshiba so there are no drivers for this OS. The 64bit version of XP was not very popular so probably you will not find all drivers on external pages. If you want XP I would recommend the 32bit version or Windows 7 Professional that has a virtualization mode for XP.
Tecra A11-11H has Intel WLAN card so check the Intel page directly. Maybe you can find a driver: [www.intel.com]
Furthermore if you install a hardware diagnostic tool like Everest or PC Wizard 2011 you can check the installed hardware and so you can search for drivers yourself.
But as I already wrote: Choose another OS ;)

Oracle Client 10.2.0.5 32 bits for windows 7 64bits

Hi
I do not have access to oracle support, but I really need to download this patch in order to install it on Windows 7 64 bits and 2008 R2...
Please somebody can put me this patch on a share/ftp or other ? Because I really need this..
Thanks a lot.
Jerome
Oracle Client 10.2.0.5 32 bits for windows 7 64bits
[email protected]

Patches are only available to Oracle customers with valid support contracts. If you do have such a contract, pl contact the person in your team who has access to My Oracle Support to download the needed patch. Patches cannot be posted on public servers as this violates ones support contract
Srini

MBR fix for Windows 7 thinkpads?

I really need to resolve this issue. My MBR is "broken" (restored to a non-lenovo stock Windows 7 MBR) and now all my lenovo software and a lot of my hardware's software won't work. e.g. Intel graphics control panel, lenovo system update, lenovo power manager, etc... While loading any of these, I get "<application name> has stopped working....".
Background:
I previously removed a dual boot of Fedora I installed. However, the grub boot loader remained and I wanted to get rid of it. Normally Lenovo's Rescue and Recovery can be used to restore the boot loader (and remove grub), but I couldn't load R&R nor install a newer version. From what I could understand from reading online, R&R required the lenovo boot loader installed to work properly so I couldn't use it to restore my boot loader - a classic Catch 22.
I decided to borrow a windows 7 CD to use the repair feature. It worked by restoring windows 7's boot loader. However, ever since I did this, a lot of the preinstalled applications I listed above do not work anymore. None of the lenovo software work for sure. I have tried to reinstall some with no luck.
My best guess is that I can't use Window's MBR, but instead need to restore Lenovo's MBR / bootloader. However, after a search online I found Lenovo only provides the MBR fix for windows XP and 2000, not 7.
Any suggestions?

Fixing the MBR shouldn't alter the functionality of programs, unless you've changed the drive letter somehow.
Reinstalling R&R within Windows should get it to work again, though.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Hello to everyone : I have a problem every time I try to open iTunes for windows 8 64bit... Program stops to work every time trying to access to the store... Is anyone able to help me to solve this issue? Thank you so much...

Hello to everyone : I have a problem every time I try to open iTunes for windows 8 64bit... Program stops to work every time trying to access to the store... Is anyone able to help me to solve this issue? Thank you so much...
N.B. iTunes version is the last one available from https://apple.com/it

Hey sweetcake74,
Thanks for the question. I understand you are experiencing performance issues with iTunes for Windows. The following articles may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

Help!!! new version of I-Tunes 10.5.3.3 for windows 7 64bit. Application exe freeze,s

Help!!! New version of I-Tunes 10.5.3.3.3 for Windows 7 64bit.
Application exe freeze,s when trying to access the I-Tunes store.
While loading, the access to the I-Tunes store bar also freezes.
The application exe will not let you shut it down as total freeze results.... :-(
To escape the frozen applacation... . control/shift/delete is the only
way that works to get back to the desktop...

I had a very similiar issue and this worked for me:
============
I just found a fix that has worked for many other users with the same 10.5.3.3 issue and it fixed a seperate issue where Apple Mobile Device service drives up CPU by 50-80%.
The fix is to open a command prompt as an Administrator and run c:\netsh winsock reset After running this commad you will need to reboot.
Here is the orginial article:http://www.thebambers.me.uk/wordpress/?p=316
Although my account is the only Windows 7 account and is an Administrator, I still could not run the command above. I first had to open a Command Prompt as an Admistrator:
1) From the main Windows icon (bottom left Windows Flag), select All Programs
2) Then select Accessories
3) Then right mouse click on Command Prompt and select Run as Administrator
4) execute "netsh winsock reset" and reboot
After performing the steps above, iTunes Store is working great and the CPU with iTunes loaded is averaging less than 10%....A MIRACLE!!!!

Satellite P100-426 - What sound driver I need for Windows 7 64bit?

Hello,
I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
Maybe someone can help me.
thank's a lot.
sven_lee

Hey,
The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
According the Toshiba page your notebook has Conexant sound chip
But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

EXS 24 crashes when I load any sample. Is there a fix for this, perhaps an install / reinstall poison as such? Any help would be very grateful.

EXS 24 crashes when I load any sample. Is there a fix for this, perhaps an install / reinstall option as such? Any help would be very grateful.
I purchased the iMac second hand and is in very tidy condition only used for production. I'm not totally clued up on the Mac side if things as I was a windows user for years. Please be gentle ! :)

Thank you. I figured it out right before I heard from you. Running the OCR before the redaction made it work correctly.
Thank you so much for taking the time to answer my question.
Make it a great day.
BG10

Will Apple release ITunes for Windows XP 64bit?

Will Apple release ITunes for Windows XP 64bit?

WARNING: This procedure involves moving, deleting, modifying, and copying system files and possibly sytem registry entries. If you make a mistake you can kill your system [I killed two of mine until I
figured out the problem with the outdated GEAR drivers]therefore:
1)Back up your entire system or better yet, get a cheapie new HD like Western digital 2 TB for $69-129 depending whether on sale or not and reinstall your system from scratch on the new drive. If
computer kraps out you just put the old drive back in.
2) Some of the procedures here may not be exactly what YOU see on YOUR specific model of computer. I've tried it on a COMPAQ sr1610nx with xp64, I've tried it on a Dell Alien with xp64, and on a
Gateway GM5442, and will now try from scratch to format harddrive, load xp64, device drivers, OS service packs and patches, AVG free, flash, java, and itunes.
3) I wrote these instructions down from memory. Read and understand entire procedure before you start. There is some troubleshooting you may need to do to make it work on your particular system. This
procedure works on 3 different models of 64 bit cpus. One CPU is an INTEL(Gateway), one CPU is an AMD X2 64-bit 4800+ Toledo(Compaq sr1610ns), and the other is an AMD x2 64-bit 3500+(DELL Alien). This
shows the capability exists on both Intel and AMD x64 architectures.
4) The current version 10.6.3 will work with modifications(including syncing ipod with ios5 and syncing cd and dvdrom ).
PROCEDURE: 1)Using you IE 64-bit browser download iTunes64Setup.exe from URL http://www.apple.com/iTunes/download/ to a new directory (For Example: ITUNES-1063-XPX64-TEST).
2) Using you IE 64-Bit browser download GEAR Drivers at URL http://www.gearsoftware.com/downloads.php?dir=updates/windows/drivers/&file=Driv er_Installer_x86_x64.exe.
3)Using your IE 64 browser download ORCA Editor at URL http://download.cnet.com/1770-20_4-0.html?query=Orca&tag=404&searchtype=download s .
4) Using your IE 64 browser download 7-Zip at URL http://download.cnet.com/1770-20_4-0.html?query=7-Zip&platformSelect=&tag=srch&s
earchtype=downloads&filterName=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebwar e%2CMobile&filter=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebware%2CMobile .
5)Use 7-Zip to extract Itunes64Setup.exe into sub components.
6)Use Orca to open and edit iTunes64.msi.
7)Change Launch Condition from VersionNT64>=600 to VersionNT64>=501. Change ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>501) to ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>=501)
8) Save and exit iTunes64.msi.
9) Use Orca to open and edit AppleMobileDeviceSupport64.msi.
10) Change Launch Condition from (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=600 to (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=501
11) Save and exit AppleMobileDeviceSupport64.msi.
12) Use Orca to open and edit AppleApplicationSupport64.msi.
13) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
14) Save and exit AppleApplicationSupport64.msi.
15) Use Orca to open and edit Bonjour64.msi.
16) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
18) Install itunes64.
19) Shutdown and Reboot.
20) Search your PC for GEAR*.*
21) Delete all the files found that are deleteable.This will get rid of the bogus Gear drivers (Version 2.2.0.1 from 2008 and 2009) that iTunes installs.
22) Run Gear drivers installer you downloaded earlier. This will load the correct Gear drivers (Version 2.2.2.0 [or 2.02.02.00- depending where you look in windows for the version number] from 2011 and
2012 drivers versus defective 2008 and 2009 drivers). The Gear driver connects the cdrom to itunes for sync. The usbappl driver connects the iPod to itunes for sync (Via the USB).
23) Ensure the file GEARAspiWDM.sys, usbaapl64.sys, also ksthunk.sys is in C:\Windows\system32\Drivers. If not search and locate these files. Then copy them to the correct directories Remember to set
your More advanced options to Search system folders, Search hidden files and folders, and search subfolders.
24) Now you must verify registry entry for UpperFilters exists and has GEARAspiWDM for value.
25) Go to Start, then Run, then enter regedit, then OK. Select HKEY_LOCAL_MACHINE, then SYSTEM, then CurrentControlSet, then Control, then Class, then {4D36E965-E325-11CE-BFC1-08002BE10318}, then
UpperFilters, right mouse click and select modify, then verify the Value data has the entry GEARAspiWDM. If not go back to {4D36E965-E325-11CE-BFC1-08002BE10318} and right mouse click select new, then
Multi-String Value, then name it UpperFilters, right mouse click and select modify and enter GEARAspiWDM for Value data, select OK and close registry.
26) Shutdown and reboot.
27) Now you need to update the cdrom/dvd driver and the USB driver.
28) Go to Start, then Control Panel, then System, then Hardware, then Device Manager, select DVD/CD-ROM drives, select Don't search. I will choose the driver to install, then select Next, ensure Show
compatible hardware is checked. Select CD-ROM as the driver, then Next, then Finish.
29) Shutdown and reboot.
30) Start computer, plug in iPod to USB, wait for windows to detect the device, probably detected as a camera. Go to Control Panel, then System, then Hardware, then Device Manager, and find the iPod.
31) Right mouse click and select Properties, then Driver.
32) Select Update Driver, then select Install from a specific location (Advanced), then Next, then select Don't search, I will choose the driver to install, then select Next, ensure Show compatible
hardware box is checked, select USB driver for iPod, then Next, then Finish.
33) Shutdown and Reboot.
34) Start iTunes. Ignore the message iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTUnes (This message comes from the device driver install failure for the
cdroms because the current Itunes installer still contains the bogus outdated Gear drivers). Select OK.
35) Now Itunes should work.

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

Search engine broken?
Just search for Oracle 11g download and you get this link on the very first page
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Then select 'See All' from the Microsoft Windows (x64) in the Oracle Database 11g Release 2 section
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Can we assume you know how to search that web page for the word 'Client'?

I need to download Oracle 10g Client (10.2.0.4) for Window 2003 64bit

I need to down load Oracle Database 10g Client Release 2 (10.2.0.4) for Windows 2003 64bit server I found the 10.2.0.1 but can't find the 10.2.0.4 download.

Hi,
Here is the link.
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
For 32-bit OS, you can get the software from:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
All the database software can be downloaded from:
Oracle Database Software Downloads
http://www.oracle.com/technology/software/products/database/index.html
Regards,
Hussein

Fix for Windows 7 64bit Install Trouble

Similar Messages

Maybe you are looking for