Fix header/footer size to print page size

Hi, is there a way to fix the font size of the header/footer to the print page size?
Example, when printing 1 PDF in letter, but the pages are from various sized originals, I want all the headers and footers to be the same size on the final letter size printed document. Currently the header and footer changes to the original page size.
HELP?????

CR doesn't have an option to print just one part of the page. Your only option is to hide all parts you don't want to print first.
Also, you should post your question to the Legacy Developer forum. I'll move it there for you.

Similar Messages

How to allow domain users to customize Adobe PDF printer page size in Printer Preferences

Hi
I am able to customize Adobe PDF printer page size in Printer Preferences in admin login but not able to customize Adobe PDF printer page size in domian users login...
can I have a solution to customize Adobe PDF printer page size in domin user login

WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

I want to print an entire URL in the footer of a print page. How can I do this?

I want the complete URL of a webpage to be printed in the footer section of the printout. When I have the URL printed in the far left footer section it gets cutoff by the center footer section which is cut off by the far right footer section.

Firefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5

PDF Printer Page Size Limitation

I have been creating documents in Microsoft Publisher 2007 & have been trying to convert them to PDF via the Acrobat PDF Maker. When I am dealing with 11x17 & Poster size (36"x48"), the PDFMaker gets into the Converting Process (60%) then displays the following option:
PDF Page Size in Adobe PDF printer is small causing pages to be split.
Press OK to convert without preserving transparency, bookmarks & links.
Press Cancel to choose a bigger sheet (at least 17.00 by 11.00 inches)
I hit cancel & have changed every Page Size option I can find including:
the Change Conversion Settings, in the Adobe PDF tab in Publisher
Conversion Settings: (Created custom setting with default page size)
Printers & Faxes in Control Panel
Adobe PDF Printer
Printing Preferences
Changed default settings & page size
I even changed the output paper 11x17
Yet, it never fails to try to convert everything into letter size. It seems as though it won't do anything over Letter size.
I have Adobe Acrobat 9 Standard & running Windows XP.
PLEASE HELP!

WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

What's the maximum print (page) size supported by CS5 64-bit?

I'm using 64-bit Windows 7, Photoshop CS5 64-bit, and have 24GB of RAM. I've put together some panoramas - big ones, up to 20'-30' long. I know the 32-bit version of Photoshop on a 32-bit processor and OS had a page size limit of around 108" long or so. To print anything longer than that required the use of an expensive RIP.
Does anyone know if my 64-bit goodness will allow me to print panos that are 20 to 30 feet long, without having to purchase a RIP? I'd simply give it a try, but I hate to waste a ton of paper just to find out that it wouldn't print completely. Any ideas?
Thanks much!
Scott

I think that some print drivers have a limit too, you might want to state what driver you are using.
Some printers do not use a driver, but an export module, that should alleviate all limits.
I remember a very old 30.000 pixel limit, that, I think has been lifted. you want to check the reference documents.

Header/Footer Appearing on Title Page

Hello,
In RoboHelp 11, every time I generate Printed Documentation (Word), my master page header/footer appears on the Title Page. It doesn't appear on RoboHelp's default title page, but it appears when I use a topic as a Title Page or when I navigate to a Word doc Title Page in Print Document Section Layout.
In the Print Document General - Content section, Multiple Header/Footer, <Default Title Page>, I select <None> for First Page (Apply to all pages in the section).
In the Print Document Section Layout, I thought RoboHelp automatically rendered anything placed above the TOC as the Title Page, but for some reason, it's seeing my Topic Title Page and/or Word doc Title Page as just another page in the document and adding the header/footer to it.
I think the last version of RoboHelp I used awhile back was 8 or 9, but I don't recall ever having this trouble adding a Title Page to a Printed document.
Please help me troubleshoot this.
Thank you!

You may also find looking at the Employee Care 2 sample project useful as that describes how to use the new print layout.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Acrobat X Pro - Header & Footer content ? (web pages)

We have thousands of Acrobat documents of converted web pages with this convention:
Header (L-R): Title - [empty] - Date
Footer: URL - [empty] - Page number
This convention needs to be retained, but *many* web pages in Internet Explorer 10/11 simply will not convert using File | Print, and there seems to be no obvious way to reformat the header/footer content for use with the Acrobat X Pro IE10/11 'Convert' button.
E.g. Acrobat X Preferences 'Convert to PDF' says 'There are no settings that can be edited in HTML'.
Is there any way to reformat the default Header & Footer contents in IE10/11 'Convert web page contents to PDF' ? I'm using Win7 x64 Pro. TIA
Dave.

It's a bit obscure, but the settings are on the conversion dialog.
Open Acrobat on the desktop but don't open any documents.
Tools > Pages > More Insert Options > Create PDF From Web Page
Click 'Settings' and make changes as required, then cancel out of the creation dialog.

How to view image size compared to Page size

In previous versions if you clicked the bottom left onthe frame of an image where the document size is you would get a small popup of an outline of the image size compared to the current page size. I cannot figure out how to see this in the new CS4 version. I've tried everything, help!

Hello Heiko,
I don't know, if it is possible, but I would say,
it's not implemented yet. Maybe you can change the picture size and use then the pictures, that might be a workaround, if you can't change the height and width in VC.
Best Regards,
Marcel

Display Header/Footer Information while Printing WAD BI7.0

Hello all,
My customer requirement is not to display Header/Footer on the Portal Screen via WAD, but while Printing, they want to display the Header/Footer. Is there any properties within Web Application Designer that this is done?
Thanks,
Af

Hi
1.Use a Table inside a Container Item.
2.In the table use Text Box( available in Miscelleaneous tab in the left) in the header and the footer
3 Drag button group Item and in the properties internal display press the combo button
4.Press Combo Command-> all commands->Commands for Web Templates-> export web application. Come again to Favourite comands tab -> Place the cursor over Export Web Application -> Press Next Button in the footer
5. Here in the Item Binding tab, give item which needs to be printed
In your Portal, you can give the query for display without this settings
Regards
N Ganesh

The printer page size setting is not working in Photoshop 5.1 with Xerox printer

I am attempting to print an output size larger than 8.5 x 11 and Photoshop will not change the size even though the printer setting is now at the larger size. Illustrator and other programs will print but but Photoshop fails. This is an issue in both the 32 and 64 bit versions. Help!

I found the following on the Xerox site...tip of the hat to T Robinson:
Re: Photoshop CS6 on Win 7x64 prints only letter size on Workcentre 7655
03-20-2013 12:28 PM
We have a Xerox WorkCentre 7435 PCL6, and I have been having a similar problem. I found a workaround in Photoshop CS5, which I will describe in case it is helpful to others. I just upgraded to Photoshop CS6 however, and the workaround no longer works with it. Instead I get an error message if I print a Job History Report. The message is partially cut off at the right margin of the page, but the part I can read says, "Completed with error(016-799): Print Instructi...on Fail detected in Decomposer." (The ellipsis indicates the part of the message that is cut off. What follows it appears on the next line down. I downloaded all updates to CS6 to see if that would help, but it did not.
Here is the workaround that worked for me on CS5:
1) Click on "Print Settings" in the Print dialog
2) On the pulldown Paper menu, select "Advanced Paper Selection"
3) Select the tray where your tabloid (or legal) sized paper is loaded
4) Click on the button at the right end of the "Paper Size" field to display the Paper Size dialog.
5) Click on the down arrow button at the right end of the "Original Document Size" field and select "Tabloid" (or "Legal") from the menu.
6) Click OK to close each of the open dialogs til you get back to the Print dialog and then print your document. The print preview should update to show you a preview reflecting the selected paper size. (This may take a few seconds to happen.)
This worked for me in CS5. Unfortunately, as noted above, it does not seem to work in CS6. The only workaround I can come up with for CS6 is to save the file as a PDF and then print it from Acrobat. This works without a problem, but it's a lot of trouble to go to every time I have to print something other than letter size.
If anyone finds a better workaround in CS6, please let me know.

Reducing Print page size

Hi All,
          I have used printing job in my project. I have added images, shapes and text etc in printing group. While printing, it takes some two to three minutes to getting print
bcoz of file size. I have used canvas to print all those things. Could any one help me to reduce this file size or how can i print without taking this long time.
         Thank you in advance.

Hi ,
        I have used printjob in my project for printing. I have a stage with images, shapes and text etc in printing group. While printing, it takes some two to three minutes to getting a single page. The Print Spooler window shows that 60MB for each page.
       file size is 60MB per page, which takes long time to print any solution?

Giant Printer/Page size list - how do I manage them?

I use InDesign/Quark/Illustrator and my output needs to be a .PS 100% of the time. So I don't need any other PPDs othe than my PDF 7 PPD and no more than 4 paper sizes. but every time I go to print to a PostScript file I have to navigate through a huge list of PPDs and same for paper size. Have you encountered this problem before. Please help! THANKS!!

I have the same issue. There are several redundant printers that are in my printer drop down list.
For whatever reason, the printer that is powered on, and showing online, does not seem to want to stay connected to the computer. The only solution seems to be to uninstall the printer and re-install it. When that happens, it leaves a copy of
the printer que in the system with the documents waiting to print still listed.
Likely, somewhere in the registry, there is a ghost file that cannot be accessed from the main interface.
ANY answers would be appreciated!

Printer page size problems

I have an HP 1180C Deskjet which is set up with A3 paper as the default size. All programs recognise this apart from Adobe Reader which resets it somehow to A4 size. So whenever I receive a pdf that is A3 size I have to go into printer properties and reset the size back to A3. Very frustrating. I've always had this problem but have finally had enough! Is there a setting which tells Reader to just accept the default paper size for the printer that is selected
Thanks in anticipation

Hi tonyioancy,
Welcome to the HP Support Forums! I see you are running into a few problems with your HP Deskjet Ink Advantage 1515.
I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
If you run the PSDR and are still experiencing the issues, please contact our technical support at 800-474-6836 as your printer may still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Remover Header/Footer Preset when printing from Safari

I just bought a MacBook Air and I've connected it to my wireless HP 8100 OfficeJet Printer. Anytime I print from safari it automatically prints the header and footer - how can I change this setting?

You can change it by unchecking the "Print Headers and Footers" box at the bottom when you do:
File > Print and click the "Show Details" box at the bottom.

How to edit header & footer info that prints from Safari?

I need to adjust what info is included in the headers & footers that print-out using Safari. For instance, only the time is printing in the header. I need the date to print instead. Can't t find anything in preferences. Thanks.

Open the print dialogue and click Show Details. Under TextEdit there should be an option to print headers and footers. Uncheck it.

Fix header/footer size to print page size

Similar Messages

Maybe you are looking for