Fix Iphone 4s restore error (-1)?
This morning I dropped my Iphone 4s in water and got it out rather quickly. I put the Iphone in rice to dry it out, and it seemed to be working just fine. Later on in the day my signal dropped. Everything else on my Iphone is working perfectly except for the signal. It constantly says "searching" but never actually finds anything.
So trying to fix it I thought I should restart my phone to factory settings to see if that'll work and while trying to do so I got hit with the "Error (-1)" message and it wont continue the restoration.
Is there a way to fix this?
**Also, with the signal problem, I tried a new sim card, tried turning it off and on and a hard restart but that didn't help either.**
InfiniteMind wrote:
... while trying to do so I got hit with the "Error (-1)" message and it wont continue the restoration.
Is there a way to fix this?
Error -1
Attempt to restore your iOS device two more times.
If the issue is still unresolved, the device may need service.
Similar Messages
-
HT201210 iphone 5 Restore Error -1
iphone 5 Restore Error -1 Not Update Firmware
Error -1 generally indicates a catastrophic hardware failure. You'll need to bring your phone into Apple or whomever provides warranty service for the iPhone in your country.
-
HT201210 iPhone 3G restoring error code "1015"
I am getting the error code "1015" and this webpage is not helping me AT ALL. Any help? I get the code when trying to restore my iPhone 3G.
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
My iphone wont restore error 21. need pictures off my phone help
i dropped my i phone and when pluged into charge you could only see the apple symbol on the screen. i got it into recovery mode but it will not restore or update comes up with error 21. there are pictures of my children on here that i do not see anymore that i need off the phone is there anyway to manage it
You might have a hardware failure because of the shock. If so, you might not be able to recover your pictures. If you do not have a backup your pictures are gone.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
To Whom It May Conern,
I recieved an iPhone from a friend recently (iPhone 5) with a shattered screen. It does not work anymore, and the home button is damaged beyond use as well.
The phone is still recognized by iTunes and the PC's I've use it with however.
I also disessembled it to confirm water damage or not. All stickers white, no water damage.
I was told by the person whom gave it to me, I would need to replace the screen but could still restore it and get it ready as it was currently.
I first hooked it up to a Windows 8 pc, and after some driver/software updating, the phone was recognized/drivers installed/etc., and iTunes had it as able to view Music, Photos, Apps, etc.
I went to factory restore it, updated iTunes/Windows, and now it is getting an error message (1) every time I do this.
I have attempted this a total of about 20 times now, on multiple computers, as well as a Mac. The last attempt was on a Mac, and I saved the error details, as written here:
2014-02-18 10:52:55.000 iTunes[2116:207]: restore library built Oct 10
2013 at 18:04:35
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: iTunes 11.1.4
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Software payload
version: 11B554a
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Using MobileRestore
state machine
[10:53:15.0634] Successfully applied power assertion
[10:53:15.0637] Changing state from 'Idle' to 'Restoring'
[10:53:15.0643] amai: AMAuthInstallSsoInitialize: can't find
SSOClient.framework
[10:53:15.0647] requested restore behavior: Erase
[10:53:15.0649] requested variant: Erase
[10:53:15.1101] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:15.9821] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[10:53:15.9825] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreLogo" Digest = "<CFData 0x7f9d16fc7e00 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9832] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreDeviceTree" Digest = "<CFData 0x7f9d16892c40
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9839] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreKernelCache" Digest = "<CFData 0x7f9d168ea840
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9845] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreRamDisk" Digest = "<CFData 0x7f9d168a7000
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9851] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC"
Digest = "<CFData 0x7f9d16c21100 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9859] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS"
Digest = "<CFData 0x7f9d1507c650 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9865] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"KernelCache" Digest = "<CFData 0x7f9d16f5f980 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9869] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB"
Digest = "<CFData 0x7f9d16fd64f0 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9873] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"AppleLogo" Digest = "<CFData 0x7f9d1689a570 [0x7fff7d3ddfa0]>{length =
20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9878] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryCharging1" Digest = "<CFData 0x7f9d1567e560
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9883] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryFull" Digest = "<CFData 0x7f9d16a7af60 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9888] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryPlugin" Digest = "<CFData 0x7f9d16c1a4b0
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9892] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryCharging0" Digest = "<CFData 0x7f9d15650d30
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9897] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryLow0" Digest = "<CFData 0x7f9d16ecbeb0 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9901] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryLow1" Digest = "<CFData 0x7f9d13cf2800 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9906] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RecoveryMode" Digest = "<CFData 0x7f9d1564e840
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9910] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"DeviceTree" Digest = "<CFData 0x7f9d1568cb40 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9915] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"iBoot" Digest = "<CFData 0x7f9d16886ee0 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9919] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID
<CFData 0x7f9d16a71da0 [0x7fff7d3ddfa0]>{length = 20, capacity = 20,
bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[10:53:15.9924] amai: AMAuthInstallRequestSendSync: SSO function
returned NULL, SSO disabled.
[10:53:15.9928] amai: AMAuthInstallDebugWriteObject: debug object
written:
file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
FC2/amai/debug/tss-request.plist
[10:53:15.9931] amai: AMAuthInstallHttpMessageSendSync:
httpRequest=<CFHTTPMessageRef 0x7f9d16f60320(0x7f9d16f60330)> { POST
request, priority -1, url
http://gs.apple.com:80/TSS/controller?action=2 }
[10:53:16.2453] amai: AMAuthInstallRequestSendSync: received tss
response (server version: 2.1.0)
[10:53:16.2457] amai: AMAuthInstallDebugWriteObject: debug object
written:
file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
FC2/amai/debug/tss-response.plist
[10:53:16.2517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle:
no entry in manifest found for "Diags"
[10:53:16.2566] iBoot build-version = iBoot-1940.3.5
[10:53:16.2574] iBoot build-style = RELEASE
[10:53:16.2576] requested restore behavior: Erase
[10:53:16.2598] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.2605] requested restore behavior: Erase
[10:53:16.2625] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.2633] unable to open device_map.txt: No such file or directory
[10:53:16.2987] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:16.2991] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:16.2994] DeviceRequest failed: 0xe000404f
[10:53:16.2997] command device request for 'getenv radio-error' failed:
2008
[10:53:16.2999] radio-error not set
[10:53:16.3001] unable to open device_map.txt: No such file or directory
[10:53:16.3003] <Recovery Mode Device 0x7f9d1563ab30>: production fused
device
[10:53:16.3005] requested restore behavior: Erase
[10:53:16.3016] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.3023] requested restore behavior: Erase
[10:53:16.3043] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.3491] <Recovery Mode Device 0x7f9d1563ab30>: operation 4
progress -1
[10:53:16.3966] bootstrapping restore with iBEC
[10:53:16.3968] requested restore behavior: Erase
[10:53:16.3988] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.4108] <Recovery Mode Device 0x7f9d1563ab30>: operation 31
progress -1
[10:53:17.4124] <Recovery Mode Device 0x7f9d1563ab30>: Recovery mode
succeeded
[10:53:17.4130] Finished Recovery Restore Phase: Successful
[10:53:17.5143] Recovery mode device disconnected
[10:53:17.5146] Recovery mode device disconnected
[10:53:17.5148] Device removed when in state Restoring, moving device
to transition state
[10:53:17.5150] Changing state from 'Restoring' to 'Transitioning'
[10:53:17.5153] Creating timer to monitor transition
[10:53:19.6720] Recovery mode device connected
[10:53:19.6722] Transitioning device returned, continuing restore.
[10:53:19.6723] Canceling timer
[10:53:19.6725] Changing state from 'Transitioning' to 'Restoring'
[10:53:19.6727] requested restore behavior: Erase
[10:53:19.6728] requested variant: Erase
[10:53:19.6745] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1654] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[10:53:20.1658] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreLogo"
[10:53:20.1662] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreDeviceTree"
[10:53:20.1667] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreKernelCache"
[10:53:20.1671] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreRamDisk"
[10:53:20.1674] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBEC"
[10:53:20.1676] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
been previously personalized; skipping it
[10:53:20.1680] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"KernelCache"
[10:53:20.1683] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
previously personalized; skipping it
[10:53:20.1688] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"AppleLogo"
[10:53:20.1691] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging1"
[10:53:20.1695] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryFull"
[10:53:20.1699] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryPlugin"
[10:53:20.1703] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging0"
[10:53:20.1707] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow0"
[10:53:20.1712] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow1"
[10:53:20.1716] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RecoveryMode"
[10:53:20.1720] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"DeviceTree"
[10:53:20.1724] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBoot"
[10:53:20.1727] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[10:53:20.1731] iBoot build-version = iBoot-1940.3.5
[10:53:20.1734] iBoot build-style = RELEASE
[10:53:20.1737] requested restore behavior: Erase
[10:53:20.1740] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1745] requested restore behavior: Erase
[10:53:20.1757] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1766] unable to open device_map.txt: No such file or directory
[10:53:20.1771] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:20.1775] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:20.1779] DeviceRequest failed: 0xe000404f
[10:53:20.1782] command device request for 'getenv radio-error' failed:
2008
[10:53:20.1785] radio-error not set
[10:53:20.1787] unable to open device_map.txt: No such file or directory
[10:53:20.1791] <Recovery Mode Device 0x7f9d16edfcf0>: production fused
device
[10:53:20.1794] requested restore behavior: Erase
[10:53:20.1805] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1813] requested restore behavior: Erase
[10:53:20.1834] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2282] <Recovery Mode Device 0x7f9d16edfcf0>: operation 4
progress -1
[10:53:20.2754] unable to open device_map.txt: No such file or directory
[10:53:20.2762] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:20.2769] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:20.2776] requested restore behavior: Erase
[10:53:20.2802] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2816] requested restore behavior: Erase
[10:53:20.2851] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2862] <Recovery Mode Device 0x7f9d16edfcf0>: operation 42
progress -1
[10:53:20.2867] requested restore behavior: Erase
[10:53:20.2889] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:21.3216] <Recovery Mode Device 0x7f9d16edfcf0>: operation 5
progress -1
[10:53:21.6870] unable to open device_map.txt: No such file or directory
[10:53:21.6874] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:21.6878] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:21.6881] DeviceRequest failed: 0xe000404f
[10:53:21.6884] command device request for 'getenv ramdisk-delay'
failed: 2008
[10:53:23.3506] <Recovery Mode Device 0x7f9d16edfcf0>: operation 6
progress -1
[10:53:24.3622] <Recovery Mode Device 0x7f9d16edfcf0>: operation 7
progress -1
[10:53:24.6932] <Recovery Mode Device 0x7f9d16edfcf0>: operation 8
progress -1
[10:53:24.6935] unable to open device_map.txt: No such file or directory
[10:53:24.6937] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:24.6940] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:24.6943] <Recovery Mode Device 0x7f9d16edfcf0>: operation 9
progress -1
[10:53:24.6945] <Recovery Mode Device 0x7f9d16edfcf0>: Recovery mode
succeeded
[10:53:24.6948] Finished Recovery Restore Phase: Successful
[10:53:25.8983] Recovery mode device disconnected
[10:53:25.8984] Device removed when in state Restoring, moving device
to transition state
[10:53:25.8987] Changing state from 'Restoring' to 'Transitioning'
[10:53:25.8989] Creating timer to monitor transition
[10:53:28.3991] RestoreOS mode device connected
[10:53:28.3992] Transitioning device returned, continuing restore.
[10:53:28.3994] Canceling timer
[10:53:28.3996] Changing state from 'Transitioning' to 'Restoring'
[10:53:28.4028] <Restore Device 0x7f9d16a1e4d0>: operation 44 progress
-1
[10:53:28.4036] requested restore behavior: Erase
[10:53:28.4039] requested variant: Erase
[10:53:28.4054] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.8914] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[10:53:28.8918] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreLogo"
[10:53:28.8922] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreDeviceTree"
[10:53:28.8927] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreKernelCache"
[10:53:28.8929] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreRamDisk"
[10:53:28.8932] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBEC"
[10:53:28.8934] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
been previously personalized; skipping it
[10:53:28.8937] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"KernelCache"
[10:53:28.8940] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
previously personalized; skipping it
[10:53:28.8944] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"AppleLogo"
[10:53:28.8948] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging1"
[10:53:28.8952] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryFull"
[10:53:28.8956] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryPlugin"
[10:53:28.8961] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging0"
[10:53:28.8965] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow0"
[10:53:28.8968] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow1"
[10:53:28.8971] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RecoveryMode"
[10:53:28.8973] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"DeviceTree"
[10:53:28.8976] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBoot"
[10:53:28.8978] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[10:53:28.8981] requested restore behavior: Erase
[10:53:28.8983] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.9006] device did not return saved USB log
[10:53:28.9009] device did not return saved panic log
[10:53:28.9011] previous restore failed with exit status 0x100
[10:53:28.9035] connected to service com.apple.mobile.restored
[10:53:28.9038] using protocol version 13
[10:53:28.9084] unable to open device_map.txt: No such file or directory
[10:53:28.9087] board config = n42ap
[10:53:28.9113] no value returned for BootArgs
[10:53:28.9116] _copyDeviceProperty() failed for restore bootargs
[10:53:28.9132] no value returned for MarketingPartNumber
[10:53:28.9135] _copyDeviceProperty() failed for mpn
[10:53:28.9138] requested restore behavior: Erase
[10:53:28.9158] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.9194] value query for 'HardwareModel' returned 'N42AP'
[10:53:28.9244] <Restore Device 0x7f9d16a1e4d0>: operation 28 progress
-1
[10:53:44.9192] previous restore failed: '
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 4 as
'Filesystem'
[10:53:44.9192] Pthread support ABORTS when sync kernel primitives
misused
[10:53:44.9192] BSD root: md0, major 3, minor 0
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 4
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 5 as
'System Config'
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 6 as
'Diagnostic Data'
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 7 as 'Bad
Block Table'
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 7
[10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
Device=uart1 at 0x32600000(0x9cb9d000)
[10:53:44.9192] com.apple.AppleFSCompressionTypeZlib kmod start
[10:53:44.9192] AppleSwissPPNFTL started with IOFlashStoragePartition
provider
[10:53:44.9192] [NAND] _FindFlashMediaAndKeepout:601 physical nand
block offset 1
[10:53:44.9192] AppleNANDFTL registered[NAND] start:356 this 0xa31aa800
PROVIDER=0xa2e64100 flashMedia=0xa2e64100
[10:53:44.9192] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[10:53:44.9192] [NAND] WMR_Start:174 FIL_Init [OK]
[10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
Device=uart3 at 0x32800000(0x9cbce000)
[10:53:44.9192] com.apple.AppleFSCompressionTypeZlib load succeeded
[10:53:44.9192] L2TP domain init
[10:53:44.9192] L2TP domain init complete
[10:53:44.9192] PPTP domain init
[10:53:44.9192] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
0x0
[10:53:44.9192] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) =
0x0
[10:53:44.9192] CLCD not initied by iBoot, driver will not load
[10:53:44.9192] [NAND] WMR_Open:371 VFL_Open [OK]
[10:53:44.9192] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
0x0
[10:53:44.9192] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) =
0x0
[10:53:44.9192] AppleH4CamIn::start - back camera expected
[10:53:44.9192] AppleH4CamIn::start - front camera expected
[10:53:44.9192] AppleH4CamIn::power_off_hardware
[10:53:44.9192] AppleH4CamIn::setPowerStateGated: 0
[10:53:44.9192] AppleMultitouchN1SPI: successfully started
[10:53:44.9192] AppleAP3DSH::probe found device with ID: 0x3f
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationMatrix [65149
-1004 -881] [-2131 64608 -379] [481 595 66374]
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationOffsets [950093
-603282 3384666]
[10:53:44.9192] AppleAP3DSH::handleStart - No calibration inverse
matrix or the data is invalid, Compute locally
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationInverseMatrix
[65953 1016 880] [2172 66508 408] [-497 -603 64699]
[10:53:44.9192] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2433
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] AppleCS35L19Amp: could not allocate control 395
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] AppleMultitouchN1SPI: detected HBPP. driver will be
kept alive
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] inverting UI colordisplay-scale = 2
[10:53:44.9192] display-rotation = 0
[10:53:44.9192] found applelogo at
/usr/share/progressui/[email protected]
[10:53:44.9192] unable to find a usable display
[10:53:44.9192] unable to get framebuffer
[10:53:44.9192] found PTP interface
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: iPod USB
Interface
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
USBAudioControl
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
USBAudioStreaming
[10:53:44.9192] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
Mobile Device
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
Mobile Device + Apple USB Ethernet
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
AppleUSBEthernet
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function USBAudioStreaming
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function AppleUSBEthernet
[10:53:44.9192] IOAccessoryPortUSB::start
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function USBAudioControl
[10:53:44.9192] virtual bool AppleUSBDeviceMux::start(IOService *)
build: Sep 27 2013 23:30:36
[10:53:44.9192] init_waste
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function IapOverUsbHid
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function PTP
[10:53:44.9192] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[10:53:44.9192] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject
*) setting debug level to 7
[10:53:44.9192] 000169.889813 wlan.N[0]
AppleBCMWLANBusInterfaceHSIC::attachBusGated():
AppleBCMWLANBusInterfaceHSIC (0xa3c5a800) -->>--
AppleBCMWLANBusInterfaceHSICShim (0xa43240c0)
[10:53:44.9192] AppleBCMWLANCore::init(): IO80211-40 Sep 27 2013
22:57:52
[10:53:44.9192] AppleBCMWLANCore::init(): AppleBCMWLANV2-249.2 Sep 27
2013 23:32:48 release
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49152 62078<-usb->56320
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49153 62078<-usb->56576
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49154 62078<-usb->56832
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f1b8 established 62078<-lo0->49155 62078<-usb->57088
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(14, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f1b8
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f1b8 established 62078<-lo0->49156 62078<-usb->57344
[10:53:44.9192] recv(15, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49157 62078<-usb->57600
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49158 62078<-usb->57856
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(15, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49159 62078<-usb->58112
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] 000169.996345 wlan.N[1] AppleBCMWLANCore::start():
Starting with MAC Address: <<<mac address>>>
[10:53:44.9192] 000169.996747 wlan.N[2]
AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags
0x20, dev 0x80326000 (this 1, provider 0)
[10:53:44.9192] 000169.996762 wlan.N[3]
AppleBCMWLANCore::setPowerStateGated(): Received power state change
before driver has initialized, ignoring
[10:53:44.9192] IO80211Peer::addPhyStatistics Phy stats started for
addr <<<mac address>>>
[10:53:44.9192] IO80211Peer::addPhyStatistics Tx Completion stats
started for addr <<<mac address>>>
[10:53:44.9192] IO80211PeerManager::initWithInterface cant add
monitoring timer
[10:53:44.9192] Started logging for intf
[10:53:44.9192] IO80211PeerManager::initWithInterface: inited peer
manager
[10:53:44.9192] IO80211Interface::init peerManager=0xa4de4400
[10:53:44.9192] start:156
[10:53:44.9192] start:156
[10:53:44.9192] [NAND] WMR_Open:420 FTL_Open [OK]
[10:53:44.9192] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[10:53:44.9192] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks -
count: 23 max_count: 23
[10:53:44.9192] [NAND] _fetchBorrowedList:881 number of borrowed blocks
16
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 0
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 1
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 2
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 3
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 5
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 6
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49160 62078<-usb->58368
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49161 62078<-usb->58624
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49162 62078<-usb->58880
[10:53:44.9192] unrecognized key 'BootArgs' in value query
[10:53:44.9192] failed to handle value query for key 'BootArgs',
sending back empty response
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49163 62078<-usb->59136
[10:53:44.9192] unrecognized key 'MarketingPartNumber' in value query
[10:53:44.9192] failed to handle value query for key
'MarketingPartNumber', sending back empty response
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49164 62078<-usb->59392
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] client protocol version 13
[10:53:44.9192] *** UUID 360DBEAB-9524-1042-B7B7-D4CE5137AC4D ***
[10:53:44.9192] Restore options:
[10:53:44.9192] UUID => <CFString 0x1564af90
[0x3d0ad0]>{contents = "360DBEAB-9524-1042-B7B7-D4CE5137AC4D"}
[10:53:44.9192] MinimumSystemPartition => <CFNumber 0x1564aee0
[0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
[10:53:44.9192] SystemPartitionSize => <CFNumber 0x1564a8e0
[0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
[10:53:44.9192] SystemPartitionPadding => <CFBasicHash
0x1564b1f0 [0x3d0ad0]>{type = mutable dict, count = 5,
[10:53:44.9192] entries =>
[10:53:44.9192] 2 : <CFString 0x1564b1a0 [0x3d0ad0]>{contents = "128"}
= <CFNumber 0x1564af10 [0x3d0ad0]>{value = +1280, type =
kCFNumberSInt64Type}
[10:53:44.9192] 3 : <CFString 0x1564ae20 [0x3d0ad0]>{contents = "16"}
= <CFNumber 0x1564af40 [0x3d0ad0]>{value = +160, type =
kCFNumberSInt64Type}
[10:53:44.9192] 4 : <CFString 0x1564aeb0 [0x3d0ad0]>{contents = "32"}
= <CFNumber 0x1564ac20 [0x3d0ad0]>{value = +320, type =
kCFNumberSInt64Type}
[10:53:44.9192] 5 : <CFString 0x1564ab20 [0x3d0ad0]>{contents = "8"} =
<CFNumber 0x1564a5e0 [0x3d0ad0]>{value = +80, type =
kCFNumberSInt64Type}
[10:53:44.9192] 8 : <CFString 0x1564abd0 [0x3d0ad0]>{contents = "64"}
= <CFNumber 0x1564ab10 [0x3d0ad0]>{value = +640, type =
kCFNumberSInt64Type}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] entering load_sep_os
[10:53:44.9192] device has no sep
[10:53:44.9192] entering partition_nand_device
[10:53:44.9192] device supports boot-from-NAND
[10:53:44.9192] nand device is already partitioned
[10:53:44.9192] entering wait_for_storage_device
[10:53:44.9192] Searching for NAND service
[10:53:44.9192] Found NAND service: IOFlashStoragePartition
[10:53:44.9192] NAND initialized. Waiting for devnode.
[10:53:44.9192] entering clear_remap_variable
[10:53:44.9192] waiting for matching IOKit service: <CFBasicHash
0x1564a9b0 [0x3d0ad0]>{type = mutable dict, count = 2,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c5e98 [0x3d0ad0]>{contents =
"IOResourceMatch"} = <CFString 0x156498e0 [0x3d0ad0]>{contents =
"IONVRAM"}
[10:53:44.9192] 2 : <CFString 0x529f00 [0x3d0ad0]>{contents =
"IOProviderClass"} = <CFString 0x1564a960 [0x3d0ad0]>{contents =
"IOResources"}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] executing /usr/sbin/nvram
[10:53:44.9192] entering format_effaceable_storage
[10:53:44.9192] effaceable storage is formatted, clearing it
[10:53:44.9192] [effaceable:INIT] found current generation, 46, in
group 1
[10:53:44.9192] [effaceable:INIT] started
[10:53:44.9192] [effaceable:INIT] started
[10:53:44.9192] effaceable storaged cleared
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is InnsbruckTaos11B554a.N42OS
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] entering check_for_restore_log
[10:53:44.9192] found restore log (size = 28041)
[10:53:44.9192] entering unmount_filesystems
[10:53:44.9192] error unmounting '/mnt2': Invalid argument
[10:53:44.9192] entering clean_NAND
[10:53:44.9192] NAND format complete
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0 system=
data=
[10:53:44.9192] entering format_storage_for_LwVM
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] unexpected partition 'LwVM' - skipping
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system= data=
[10:53:44.9192] entering create_filesystem_partitions
[10:53:44.9192] User specified system partition size, skipping firmware
extras size.
[10:53:44.9192] system partition padding size is: 167772160 bytes
[10:53:44.9192] unable to open : No such file or directory
[10:53:44.9192] creating 2 partitions
[10:53:44.9192] creating encrypted data partition
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] wipe entire partition: 1 (old = 0 new = 1749)
[10:53:44.9192] block size for /dev/disk0s1s1: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] block size for /dev/disk0s1s2: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[10:53:44.9192] executing /sbin/newfs_hfs -s -v Data -J -P
/dev/disk0s1s2
[10:53:44.9192] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering mount_filesystems
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is System
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume System appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s2
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is Data
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume Data appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
[10:53:44.9192] entering resize_system_partition_to_options
[10:53:44.9192] User specified system partition size, skipping firmware
extras size.
[10:53:44.9192] Found SystemPartitionPadding value of 167772160 bytes
[10:53:44.9192] Erasing system partition prior to resize operation.
[10:53:44.9192] block size for /dev/disk0s1s1: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is System
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume System appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] Trying to resize system partition to 1833959424 bytes
aka 1749 MB
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=447744
[10:53:44.9192] no change in size
[10:53:44.9192] Successfully resized the system partition
[10:53:44.9192] entering maximize_data_partition
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=<<<<<IMEI>>>>>>6
[10:53:44.9192] maximizing data partition to 14020509695 bytes
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=3422976
[10:53:44.9192] no change in size
[10:53:44.9192] Successfully resized data partition to consume free
blocks
[10:53:44.9192] The system partition now has a total HFS+ capacity of
1749 MB
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering unmount_filesystems
[10:53:44.9192] entering ramrod_ticket_update
[10:53:44.9192] looking up root ticket hash
[10:53:44.9192] device tree ticket-hash: <CFData 0x155547e0
[0x3d0ad0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[10:53:44.9192] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[10:53:44.9192] received valid ticket (2729 bytes)
[10:53:44.9192] entering restore_images
[10:53:44.9192] Successfully marked device node /dev/rdisk0s1s1 as
static data
[10:53:44.9192] executing /usr/sbin/asr -source asr://localhost:12345
-target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[10:53:44.9192] ASR: asr: Unable to disable idle sleep - -536870199
[10:53:44.9192] ASR STATUS: start 241.1 multicast-client
[10:53:44.9192] ASR: Waiting for connection attempt from server
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500c6e0 established 12345<-lo0->49167 12345<-usb->60160
[10:53:44.9192] ASR STATUS: setup
[10:53:44.9192] ASR: Validating target...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR STATUS: metadata
[10:53:44.9192] ASR: Validating source...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR: Retrieving scan information...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR: Validating sizes...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR STATUS: restore
[10:53:44.9192] ASR RESTORE PROGRESS: 2%
[10:53:44.9192] ASR RESTORE PROGRESS: 4%
[10:53:44.9192] ASR RESTORE PROGRESS: 6%
[10:53:44.9192] ASR RESTORE PROGRESS: 8%
[10:53:44.9192] ASR RESTORE PROGRESS: 10%
[10:53:44.9192] ASR RESTORE PROGRESS: 12%
[10:53:44.9192] ASR RESTORE PROGRESS: 14%
[10:53:44.9192] ASR RESTORE PROGRESS: 16%
[10:53:44.9192] ASR RESTORE PROGRESS: 18%
[10:53:44.9192] ASR RESTORE PROGRESS: 20%
[10:53:44.9192] ASR RESTORE PROGRESS: 22%
[10:53:44.9192] ASR RESTORE PROGRESS: 24%
[10:53:44.9192] ASR RESTORE PROGRESS: 26%
[10:53:44.9192] ASR RESTORE PROGRESS: 28%
[10:53:44.9192] ASR RESTORE PROGRESS: 30%
[10:53:44.9192] ASR RESTORE PROGRESS: 32%
[10:53:44.9192] ASR RESTORE PROGRESS: 34%
[10:53:44.9192] ASR RESTORE PROGRESS: 36%
[10:53:44.9192] ASR RESTORE PROGRESS: 38%
[10:53:44.9192] ASR RESTORE PROGRESS: 40%
[10:53:44.9192] ASR RESTORE PROGRESS: 42%
[10:53:44.9192] ASR RESTORE PROGRESS: 44%
[10:53:44.9192] ASR RESTORE PROGRESS: 46%
[10:53:44.9192] ASR RESTORE PROGRESS: 48%
[10:53:44.9192] ASR RESTORE PROGRESS: 50%
[10:53:44.9192] ASR RESTORE PROGRESS: 52%
[10:53:44.9192] ASR RESTORE PROGRESS: 54%
[10:53:44.9192] ASR RESTORE PROGRESS: 56%
[10:53:44.9192] ASR RESTORE PROGRESS: 58%
[10:53:44.9192] ASR RESTORE PROGRESS: 60%
[10:53:44.9192] ASR RESTORE PROGRESS: 62%
[10:53:44.9192] ASR RESTORE PROGRESS: 64%
[10:53:44.9192] ASR RESTORE PROGRESS: 66%
[10:53:44.9192] ASR RESTORE PROGRESS: 68%
[10:53:44.9192] ASR RESTORE PROGRESS: 70%
[10:53:44.9192] ASR RESTORE PROGRESS: 72%
[10:53:44.9192] ASR RESTORE PROGRESS: 74%
[10:53:44.9192] ASR RESTORE PROGRESS: 76%
[10:53:44.9192] ASR RESTORE PROGRESS: 78%
[10:53:44.9192] ASR RESTORE PROGRESS: 80%
[10:53:44.9192] ASR RESTORE PROGRESS: 82%
[10:53:44.9192] ASR RESTORE PROGRESS: 84%
[10:53:44.9192] ASR RESTORE PROGRESS: 86%
[10:53:44.9192] ASR RESTORE PROGRESS: 88%
[10:53:44.9192] ASR RESTORE PROGRESS: 90%
[10:53:44.9192] ASR RESTORE PROGRESS: 92%
[10:53:44.9192] ASR RESTORE PROGRESS: 94%
[10:53:44.9192] ASR RESTORE PROGRESS: 96%
[10:53:44.9192] ASR RESTORE PROGRESS: 98%
[10:53:44.9192] AppleUSBDeviceMux::sessionUpcall socket is closed,
session 0xa500c6e0 (12345<-lo0->49167 12345<-usb->60160)
[10:53:44.9192] ASR RESTORE PROGRESS: 100%
[10:53:44.9192] ASR: Copied 1666908672 bytes in 70.21 seconds, 23184.43
KiB/s
[10:53:44.9192] ASR STATUS: verify
[10:53:44.9192] ASR VERIFY PROGRESS: 2%
[10:53:44.9192] ASR VERIFY PROGRESS: 4%
[10:53:44.9192] ASR VERIFY PROGRESS: 6%
[10:53:44.9192] ASR VERIFY PROGRESS: 8%
[10:53:44.9192] ASR VERIFY PROGRESS: 10%
[10:53:44.9192] ASR VERIFY PROGRESS: 12%
[10:53:44.9192] ASR VERIFY PROGRESS: 14%
[10:53:44.9192] ASR VERIFY PROGRESS: 16%
[10:53:44.9192] ASR VERIFY PROGRESS: 18%
[10:53:44.9192] ASR VERIFY PROGRESS: 20%
[10:53:44.9192] ASR VERIFY PROGRESS: 22%
[10:53:44.9192] ASR VERIFY PROGRESS: 24%
[10:53:44.9192] ASR VERIFY PROGRESS: 26%
[10:53:44.9192] ASR VERIFY PROGRESS: 28%
[10:53:44.9192] ASR VERIFY PROGRESS: 30%
[10:53:44.9192] ASR VERIFY PROGRESS: 32%
[10:53:44.9192] ASR VERIFY PROGRESS: 34%
[10:53:44.9192] ASR VERIFY PROGRESS: 36%
[10:53:44.9192] ASR VERIFY PROGRESS: 38%
[10:53:44.9192] ASR VERIFY PROGRESS: 40%
[10:53:44.9192] ASR VERIFY PROGRESS: 42%
[10:53:44.9192] ASR VERIFY PROGRESS: 44%
[10:53:44.9192] ASR VERIFY PROGRESS: 46%
[10:53:44.9192] ASR VERIFY PROGRESS: 48%
[10:53:44.9192] ASR VERIFY PROGRESS: 50%
[10:53:44.9192] ASR VERIFY PROGRESS: 52%
[10:53:44.9192] ASR VERIFY PROGRESS: 54%
[10:53:44.9192] ASR VERIFY PROGRESS: 56%
[10:53:44.9192] ASR VERIFY PROGRESS: 58%
[10:53:44.9192] ASR VERIFY PROGRESS: 60%
[10:53:44.9192] ASR VERIFY PROGRESS: 62%
[10:53:44.9192] ASR VERIFY PROGRESS: 64%
[10:53:44.9192] ASR VERIFY PROGRESS: 66%
[10:53:44.9192] ASR VERIFY PROGRESS: 68%
[10:53:44.9192] ASR VERIFY PROGRESS: 70%
[10:53:44.9192] ASR VERIFY PROGRESS: 72%
[10:53:44.9192] ASR VERIFY PROGRESS: 74%
[10:53:44.9192] ASR VERIFY PROGRESS: 76%
[10:53:44.9192] ASR VERIFY PROGRESS: 78%
[10:53:44.9192] ASR VERIFY PROGRESS: 80%
[10:53:44.9192] ASR VERIFY PROGRESS: 82%
[10:53:44.9192] ASR VERIFY PROGRESS: 84%
[10:53:44.9192] ASR VERIFY PROGRESS: 86%
[10:53:44.9192] ASR VERIFY PROGRESS: 88%
[10:53:44.9192] ASR VERIFY PROGRESS: 90%
[10:53:44.9192] ASR VERIFY PROGRESS: 92%
[10:53:44.9192] ASR VERIFY PROGRESS: 94%
[10:53:44.9192] ASR VERIFY PROGRESS: 96%
[10:53:44.9192] ASR VERIFY PROGRESS: 98%
[10:53:44.9192] ASR VERIFY PROGRESS: 100%
[10:53:44.9192] ASR: Verified SHA-1 checksum 1666908672 bytes in 8.87
seconds, 183434.91 KiB/s
[10:53:44.9192] ASR STATUS: finish
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering mount_filesystems
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is InnsbruckTaos11B554a.N42OS
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s2
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is Data
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume Data appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
[10:53:44.9192] entering install_kernel_cache
[10:53:44.9192] writing kernelcache to
/mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
[10:53:44.9192] entering install_secure_vault_daemon
[10:53:44.9192] entering get_hardware_platform
[10:53:44.9192] platform-name = s5l8950x
[10:53:44.9192] linking /mnt1/usr/sbin/securekeyvaultd to
/mnt1/usr/sbin/securekeyvaultd.s5l8950x
[10:53:44.9192] no securekeyvaultd for s5l8950x
[10:53:44.9192] entering ramrod_ticket_write
[10:53:44.9192] writing ticket to
/mnt1/System/Library/Caches/apticket.der
[10:53:44.9192] entering update_device_firmware
[10:53:44.9192] create_baseband_update_options: Got imeisv: 6
[10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bca0
[0x3d0ad0]>{type = mutable dict, count = 3,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
"IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
kCFNumberSInt32Type}
[10:53:44.9192] 1 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
"autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
[10:53:44.9192] 2 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
"disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] _baseband_update_requires_system_filesystem_once:
querying baseband to determine if it requires system filesystem
[10:53:44.9192] _baseband_update_requires_system_filesystem_once: query
returned <CFBasicHash 0x1564bb90 [0x3d0ad0]>{type = mutable dict, count
= 3,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c7008 [0x3d0ad0]>{contents =
"requireSystemPartitionMount"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value
= true}
[10:53:44.9192] 1 : <CFString 0x1c7028 [0x3d0ad0]>{contents =
"requireUserPartitionMount"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value =
false}
[10:53:44.9192] 2 : <CFString 0x1c7038 [0x3d0ad0]>{contents =
"requireBasebandFSPartitionMount"} = <CFBoolean 0x3d0e88
[0x3d0ad0]>{value = false}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] entering update_iBoot
[10:53:44.9192] found 'AppleImage3NORAccess' object in IORegistry
[10:53:44.9192] entering update_iBoot_image3_NOR_access
[10:53:44.9192] write_image3_data: flashing illb data (length = 0x24a1a)
[10:53:44.9192] write_image3_data: flashing SCAB data (length = 0xaf0)
[10:53:44.9192] ticket updated
[10:53:44.9192] write_image3_data: flashing ibot data (length = 0x4518c)
[10:53:44.9192] write_image3_data: flashing chg1 data (length = 0x88cc)
[10:53:44.9192] write_image3_data: flashing bat0 data (length = 0xaa4c)
[10:53:44.9192] write_image3_data: flashing batF data (length = 0x1484c)
[10:53:44.9192] write_image3_data: flashing logo data (length = 0x1a8c)
[10:53:44.9192] write_image3_data: flashing recm data (length = 0xdd8c)
[10:53:44.9192] write_image3_data: flashing dtre data (length = 0x153cc)
[10:53:44.9192] write_image3_data: flashing chg0 data (length = 0x260c)
[10:53:44.9192] write_image3_data: flashing bat1 data (length = 0x80c)
[10:53:44.9192] write_image3_data: flashing glyP data (length = 0xf8c)
[10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[10:53:44.9192] [nand_part_core:INF@2289] first 2 pages of boot blocks
written with copies of partition table
[10:53:44.9192] entering update_gas_gauge
[10:53:44.9192] entering update_ir_mcu
[10:53:44.9192] looking for mcu nub...no entry from path!
[10:53:44.9192] TiSerialFlasher not supported on this platform. Exiting.
[10:53:44.9192] entering update_baseband
[10:53:44.9192] update_baseband: registering for progress notifications
[10:53:44.9192] create_baseband_update_options: Got imeisv: 6
[10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bc60
[0x3d0ad0]>{type = mutable dict, count = 6,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c71e8 [0x3d0ad0]>{contents =
"SystemRoot"} = <CFString 0x1564b270 [0x3d0ad0]>{contents = "/mnt1"}
[10:53:44.9192] 1 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
"IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
kCFNumberSInt32Type}
[10:53:44.9192] 2 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
"autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
[10:53:44.9192] 3 : <CFString 0x1c7178 [0x3d0ad0]>{contents =
"forceUpdate"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] 5 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
"disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] 6 : <CFString 0x1c7198 [0x3d0ad0]>{contents =
"DisallowFusiing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] update_baseband: querying baseband info
[10:53:44.9192] bbupdater: BEGIN: Querying info at stage first
[10:53:44.9192] bbupdater: BEGIN: Preparing first stage
[10:53:44.9192] bbupdater: Requested boot mode: kBBUBootModeNone
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
5...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
4...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] [nand_part_core:INF@3169] next 98 pages of boot blocks
written with LLB image of size 150080 bytes
[10:53:44.9192] [nand_part_core:INF@3172] final 156 pages of boot
blocks written with random data in full page format
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
3...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
2...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
1...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
0...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: END(kBBUReturnIOError): Preparing first
stage
[10:53:44.9192] bbupdater: END(kBBUReturnIOError): Querying info at
stage first
[10:53:44.9192] send_bbupdate_status: sending baseband update status to
host
[10:53:44.9192] update_baseband: bbupdater error: The operation
couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a
communication transport to baseband.)
[10:53:44.9192] 0: RamrodErrorDomain/3ec: update_baseband: failed
querying baseband info
[10:53:44.9192] 1: BBUpdater/3: Failed creating a communication
transport to baseband.
[10:53:44.9192] unableHello everyone,
After dealing with this issue for a few days I was able to fix my issue.
The errors that I was getting were 1 and -1 on an iPhone4 upgrading to IOS 7
I read and tried every fix under the sun it seemed.
The fix for me was the DNS cache (even though I tried it on a different computer)
Here is the whole story...
I had a working iPhone4 on iOS6 when I started trying to upgrade to the latest version.
I plugged it in to iTunes and hit restore, after an extremely long DL (slow on my end) it failed.
I decided at that time that I would actually start trying and I unplugged all my other USB and used a real apply usb cable as opposed to my long one.
I also updated iTunes to the latest version and hit the restore button in iTunes again.
After another extemely long DL (because turns out my old verison of iTunes downloaded 6.1.3) I tried again.
Error 1 or -1 depending on which time I tried.
I then checked my hosts file and it was good so I tried disconnecting the battery and hitting the power buton a bunch to drain the power and it still failed with error 1.
After maunally downloading the firmware from ipsw downloader i tried again but no results so I downloaded the alternate version of the software for GSM phones which was the incorrect version so didn't even start before it failed.
Frustrated at this point so I get a netbook and throw a fresh copy of windows 7 onto it.
Update all the drivers and various runtimes then installed latest verison of iTunes.
checked the hosts just to be stupid sure it would work and it was good.
Error 1
So at this point I have waisted two days and I have alreadly replaced the clients phone as "I (meaning apple)" broke it.
So back on my main PC I start from square one and realise that I never actually cleared my DNS cache as it says in many instructions.
So I try that and 10 minutes later I got a brand new phone.
TLDR: Clear your DNS cache in Windows and Mac
Steps I used to fix it
Apple brand charger
back/motherboard usb port
hosts file empty
dns cache cleared
dfu mode
Shift click restore button for custom ipsw file / latest version
To clear DNS cache in Windows hit the windows key or button in the bottom right (windows 7) and type CMD
Right click and run cmd as administrator
type
ipconfig /flushdns
I fixed mine after giving up so don't give up and don't feed the "unplug it" and "hit buttons at a certain point trolls".
Good Luck. -
How to fix iPhone 3G "Random Error 1645".
I kept getting the "Unknown 1645" error. iTunes wouldn't let me update/restore my iPhone. Until I came across this, which worked and now my iPhone is fully operational again. I hope others who are experiencing this "Random Error 1645" come across this thread.
1. Disconnect your iPhone cable but leave connected the other USB end to the computer.
2. Turn off your iPhone holding the Sleep/Wake button. The red slider bar appears. Slide the bar and wait until the iPhone turns off. Or you could hold the Sleep/Wake and Home buttons at the same time until the iPhone turns off.
3. While pressing and holding the Home button connect the USB cable to your iPhone. It should power on. Hold the Home button until you see the "Connect to iTunes" message. Open iTunes if necessary. You should see the "iTunes detected an iPhone in recovery mode..." alert screen.
4. Choose "Restore".
Thanks.The iPhone is not user servicable. You can go to http://www.ifixit.com and get some instruction on how to try if if you want. Given that the 3G has been discontinued for 2 1/2 years, and there isn't much market for it any more, it might be worth your while.
There is no magic that can fix broken hardware.
You can get it replaced by Apple for $149, but at this stage, I think a newer phone would be a better investment. -
I bought an iPhone 4 a few days ago and went to set it up as per usual. When I set it up, i did it from a back up like usual but from then on ive had nothing but problems. Firstly the set-up didnt work and got an error message that it could not be activated the phone. Tried it again, got same error. Then it ended up in recovery mode, tried to restore the phone, its get to the end of the recovery and get an error message "An unknown error occurred (16)" Entered the phone in DFU mode as well and tried same thing, still get same error message. Tried restoring from both a downloaded iOs and directly off the Apple server for both methods. Nothing seems to work. Anyone have any ideas as to what/where i should do next. Thanks.
Is everyone else on a Windows PC as well? I think this is iTunes Windows PC related... but, here is my story...
I have an iPad 2 that is also getting this error, as others have said, at the very end of the verify process.
I have uninstalled and reinstalled iTunes.
I have tried to update from another iTunes account.
I have tried to update from another iTunes account on a different computer.
I tried reinstalling in DFU mode.
I called Apple Care, and they were quite mystified by Error 16 because, as we know, it is undocumented. They seem to think, however, that this is related to other 16XX errors:
http://www.igeeksblog.com/how-to-fix-itunes-errors-16xx/
Apple Care asked me to remove all my USB devies, dismantle my security software, and remove any firewalls or third-party security software. I did that to the best of my abilities and I got the same message.
I also tried on my husband's laptop, and got error 3194, which is related again to security and firewall settings causing the update server to be unreachable.
This feels wrong to me because I have three other iOS devices (iPhone 4, iPhone 5, iPad 4) and all updated to iOS 7, iOS 7.01, and iOS 7.02 just fine.
I may try to update from work where I may be able to use a Mac. I will let you know if that works.
If not, I guess I'm driving 3 hours to the Apple Store. -
IPhone 5 restore error (-1) after update attempt
Cant restore my iphone 5 getting this error every time, tried with different macs and one win PC, changed the USB cable, stil no luck..anybody?
As the iPhone 5 is not user serviceable, you have voided the warranty with Apple and forfeited your right to support on that phone, including from this forum.
You'll need to search elsewhere on the internet, such as ifixit.com for a solution to your problem, if one indeed exists. Again, you can receive no help on this forum.
Best,
GDG -
Iphone 4 restore error 1....any help pls
i just go this iphone ,its was working very well the it suddely lock me out i cant get in ..i have tried to restore the phone even though i never had any data yet.Please i need iphone pros on this one..thanks
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support. -
HT1414 iphone cannot restore error 1015
i cannot restore my iphone error 1015
Error 1015 means you are trying to downgrade the iOS or your iPhone was jailbroken. Neither is allowed. If your iPhone was jailbroken the terms of this forum prohibit any further discussion. Check the following link for more information about this error:
http://support.apple.com/kb/TS3694 -
TS2529 iPhone 3gs Restore Error : Could not activate iPhone
Hi,
i have jail broken iphone 3gs with BB 5.0.1, then i have updated to 5.1.1, when i am restoring it is not connecting to my network carrier. Error: Your iPhone could not activated because the activation server is temporarily unavailable.
Pls suggest...
Rgds,
Someshwar. ASorry but your iphone is jailbroken and you cannot get any help here.
-
HT201263 Black iPhone 4S restore error 3259
My iPhone 4S has a black/unresponsive screen. I completed all listed resolution steps and still no change, except when in iTunes and I attempted to restore to factory - I received 2x error: 3259 - been without a phone for 5 days - SOS!!
http://support.apple.com/kb/ts2799
-
I FOUND THE FIX: iPhone Photo Copying Error - Required file cannot be found
This was driving me crazy for weeks.
The solution is quite easy. I noticed that I could import new photos and they would copy. But when I tried to do folders that were there for a while, I would get the error. So I assumed some database had to be corrupt since the photos were viewable in iPhoto. I tried exporting a library and reimporting it and those copied. So I KNEW it was a database issue.
iPhoto creates "iPhone/iPod" versions of any photo you copy to a device. Even when you remove it from the device, it still saves "the iPod" version in case you re-add it. So the solution is to delete all of these versions. I have provided easy instructions.
*Before doing this...make sure to write down which events/albums you keep on your iPhone because doing this will remove all of those selections. You will have to redo them afterwords. But unlike your current situation...it will WORK and actually sync. These directions will require you to delete all of the photos on your device, too (not your camera roll).*
1. In iTunes UNCHECK "Sync Photos from iPhoto". When it asks you about deleting all of the photos...do it. Let it remove all of your photos.
2. Eject your iPhone and exit iTunes. Also make sure you have exited iPhoto.
3. Find the iPhone Library you are using. Right Click and choose "SHOW PACKAGE CONTENTS".
4. Find the "iPod Photo Cache" folder and delete it.
5. Go back into iTunes and Re-enable "Sync Photos from iPhoto". Choose what you want to copy...and click sync.
Viola.For some reason iPhoto uses *"iPod Photo Cache"* for both devices including your *iPod or iPhone*.
So even if you have an iPhone...follow my directions. The apply to any device. iPhone, iPad, iPod...and its the same for all versions of iPhone and iPod, too.
Right click on your iPhoto library. It still labels it as "iPod Photo Cache" even though you have an iPhone or iPad. I don't know why. Ask our uncle Steve. -
How fix iPhone encountered unexpected error 0xE8000001 install phase?
Please help ( if there is an iPhone developer forum somewhere please redirect me)!
I can not get even the sample "Hello World" application to download and run on my iPhone device. I have spent hours googling and messing around in the iPhone Developer Program Portal trying to figure out where I went wrong. I get the following error after I build and run:
"Your mobile device has encountered an unexpected error 0xE8000001 during the install phase: Verifying application"
"Try disconnecting and powering off"
Any tips, resources, or advice is much appreciated. I about to the point to consider wiping and reinstalling my Mac in a hope it may improve whatever I did wrong between SDK1-8.
Thanks in advance,
-EdThank you _very much_ for looking at my "Bundle identifier" syntax. I think I am getting closer. I removed the 10-digit prefix from the Info.plist "*Bundle identifier*" setting. My setting is now entered as seen below.
"*myapp.com.mycompany.${PRODUCT_NAME:identifier}*"
My new challenge is that when I build-and-go it displays the following message in the bottom-left:
"*Failed to start remote debugserver for (null) on Ed's Phone*"
Any advice is much appreciated and I appreciate all others who have added comment to this thread.
-Ed
For others that are having similar problesm, you can now print out the portal "How to" adventure game. On the portal home page is a link to the following PDF. I am planning on printing out and reading the whole thing and high-lighting all the important bits and steps.
http://adcdownload.apple.com/iphone/iphone_developer_program_user_guide/iphone_d eveloper_program_user_guide__standard_program.pdf
*A tip to check if you have a valid "Code Signing Identity" installed and entered in your project Build settings.*
1 - Select the root folder in your code project
2 - Press the "i" info icon on the tool bar
3 - Go to the *Build* tab
4 - The format of Code *Signing Identity->Any iPhone OS Device* setting is case sensitive and looks like: "*iPhone Developer: John Doe*"
5 - If it is correct, the associated provisioning profile will appear in the drop-down list of the Code Signing *Provisioning Profile->Any iPhone OS Device* setting. If you mess it up, do it intentionally by try adding an extra character, you should see the provisioning profile disappear from the list. If you see no change, you may have a bad developer name(wrong case?) or provisioning profile or profile install problem. -
TS1702 please anybody knows to fix iphone 5 SMS error tell me the way
Hi....Guys,
I'm facing a big trouble with my iphone 5 . Because when I send SMS it's showing " not deliverd" So I tried soo many ways to fix this prob, But still the same.. anybody knows to how to fix please post here......
Regards,
Chandana.
<Email Edited by Host>Please See item 3 Here > Community etiquette
Maybe you are looking for
-
Cannot install iTunes on Windows XP Pro
hello, I downloaded iTunes and after I agree to the terms it alerts and says: The iTunes Music Library.itl file is locked, on a locked disk, or you do not have write permission for this file. I am an administrator on my computer and even logged in as
-
Insatlling Oracle 8i on Window 2000,Window me
Can Oracle 8i be install on Window 2000 or window millenium( window me). I tried to install Oracle8i on Window me and got the following errors: There was a problem in accessing the staging area.Please make sure the specified values for 'source' and '
-
ITunes freezes downloading app updates
I'm running 10.5 (141) on my iMac running Lion and am running into a problem where iTunes will constantly freeze when I download my app updates. If I download updates individually, there doesn't seem to be a problem and if I turn off simultaneous do
-
JTree changing Icons of leaves of a node
I have a Jtree with root node as "Project" I have nodes as "color", "sports", "food" which in turn have leaves. I have to set an Icon "Icon1" for all the leaves of node "color" I have to set another Icon "Icon2" for all leaves of node "sports" and ha
-
Youtube Constantly Buffering: Wired and Wireless, Please Help
Hi All, Hoping someone can shed some light on my issue. I have a FIOS triple play bundle with 35/35 speeds. When I run a speed test I typically see 42/38. The problem starts when I go to watch Youtube videos on any of my 3 consoles. I have an Xbo