Fix Pack 3- Which file do I install from the zip file provided

I just pulled the zip file onto my desktop to install fix pack 3. I thought it would just be one file to install since I already have Xclesius engage 2008 on my computer. But when I looked at the zipped file there was hundreds of files in there. Does anyone know which one I am supposed to run to get the fix pack?

Hi Adam,
Did you download FP3 from the support marketplace? If so, you get the file "xcelsius2008_sp1_fp3.zip".
Opening that zip file will give you two files - "Xcelsius 2008 SP1 Fixpack 3" (folder)and "xcelsius2008_sp1_fp3_fixed_issues.pdf". setup.exe is under that folder.
If you are not getting this directory structure, you may want to download the file again...
Bobby

Similar Messages

  • [svn:fx-trunk] 14729: Fix merge 14728 which I didn't do from root.

    Revision: 14729
    Revision: 14729
    Author:   [email protected]
    Date:     2010-03-12 07:07:33 -0800 (Fri, 12 Mar 2010)
    Log Message:
    Fix merge 14728 which I didn't do from root.
    Property Changed:
        flex/sdk/trunk/

    Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
    Because there is a lot more going on under the hood than merely copying files.
    The only way to do what you want is to use cloning software like Carbon Copy Cloner.
    My  advice is to rescue your personal files to a regular non-TimeMachine  external drive, Zero erase the ENTIRE drive and install OS X fresh and  update, then your programs from original sources and files from backup.
    Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
    Most commonly used backup methods
    How to erase and install Snow Leopard 10.6

  • Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

    Hi,
    I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
    -cRIO-9113 4 slot chassis
    In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
    -cRIO-9022 Real-Time Controller
    -NI 9144 8 slot expansion chassis
    In this chassis I have installed:
    -Slot 1: NI 9213 (16ch thermocouple inputs module)
    -Slot 2: NI 9201 (8ch ±10 V analog input module)
    -Slot 3: NI 9263 (4ch ±10 V analog output module)
    -Slot 4: NI 9426 (32ch sourcing digital input module)
    -Slot 5: NI 9426 (32ch sinking digital input module)
    -Slot 6: NI 9476 (32ch sourcing digital output module)
    In the controller I have installed the following softwares:
     -IndCom for EtherCAT Scan Engine Support 1.2.0
    -LabVIEW NI SoftMotion Module 9.0.0
    -LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
    -LabVIEW Real-Time 9.0.1
    -LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
    -Web Server for LabVIEW RT 2.0.0
    -Language Support for LabVIEW RT 1.0.0.3
    -NI Scan Engine 1.1.0
    -NI Scan Engine Advance I/O Access 1.1
    -NI-Motion 8.0.0
    -NI-RIO 3.4.0
    -NI-RIO IO Scan 1.4
    -NI-VISA 4.6
    -NI-VISA Server 4.6
    Well, I made  VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
    Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
    Ferdinand Martinez
    FMO Automation LLC

    Hi nausfaratu,
    Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
    Aaron P
    National Instruments
    Applications Engineer
    http://www.ni.com/support 

  • How to check which version of Jdk installed on the machine?

    How to check which version of Jdk installed on the machine?
    & Which version of Oracle Insatlled on my machine?

    String version = System.getProperty("java.version"); %

  • Is after effects cc trial a separate install from the subscription version?

    is after effects cc trial a separate install from the subscription version?

    Thank you Mylenium. All this time I have been absolutely convinced that you don't need to defragment SSDs. Is this a complete misunderstanding? Even if you do though, I have Windows 8 (not 8.1) which is doing that once a week automatically (apparently even to SSDs).
    Are you saying that the 30GB disk cache set up works like a contiguous file?
    i7 3930k (12 virtual cores) on P9X79 Deluxe
    2 x 120GB Force GT Raid 0 SSD on SATA 6gb/s is my boot drive as well as where I keep programs and the disk cache. I do a disk clean up to remove temp files a couple of times a week but that's all.
    1 x 3TB Barracuda on on SATA 6gb/s for back ups and exports
    3TB Lacie on USB 3 for source video and project files
    2TB Lacie on USB 3 for archive projects
    660ti 2GB
    I'll try a manual defrag of my RAID 0 SSDs now.

  • Could somebody teach me how to set the lastest iTunes so that it repeats just one of the numbers installed from the CD? I've alreadly tried it by clicking "control" and the bottom, but it doesn't work. Thank you.

    Could somebody teach me how to set the latest iTunes so that it repeats just one of the numbers installed from the CD?
    I've already given it a try by clicking "control" and the bottom item which means one item in Japanese, but it doesn't work.
    Thank you.

    You can access the repeat options if you right-click on the shuffle icon or if menus are enabled you can use
    Controls > Repeat > Off | All | One.
    Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
    The bottom one should do it.
    tt2

  • I have LR4 already installed and a new disc with LR5 on it (never activated - have serial number).  I do not have a drive on my computer to install from the disc.  How do I go about upgrading to LR5?

    I have LR4 already installed and a new disc with LR5 on it (never activated - have serial number).  I do not have a drive on my computer to install from the disc.  How do I go about upgrading to LR5?

    Download the installation file(s) and use the serial number you have to activate it. 
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1  .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't  found the correct camera app .please help me .

    hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't  found the correct camera app .please help me .please give any suitable link where i find the correct camera app

    It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
    If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    Hello, Suzanne. 
    Thank you for visiting Apple Support Communities. 
    Unfortunately there isn't a list available at this time for applications that are specific for your iOS/Software version.  However, once you know which iOS/Software version you have installed, you can browser various applications and look for ones that meet your system requirements.  I have included a screenshot below on how to look for this information. 
    iPhone, iPad, iPod: How to find the software version
    http://support.apple.com/kb/ht2188
    Cheers,
    Jason H. 

  • How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

    How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

    Boot your computer while pressing Command-R. You can reinstall Lion from here. Covered here:
    http://support.apple.com/kb/HT4718

  • I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

    I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

    turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

  • I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

    I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

    Because the Nano was previous synced to another comuter/iTunes library.
    See the following:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • IPhone 5; iOS 8.1.2: How do I remove a deleted App from Cloud storage so that I may do a fresh install from the App Store?

    I Deleted a faulty App in order to do a fresh re-install from the App Store - but it keeps installing from Cloud storage and I don't know whether this is the original App.
    How do I stop this happening?

    An app cannot self install. If you are using the App Store app see the app listed with a cloud icon, it means that app was downloaded previously but it is no longer on your device. Tap the cloud icon to redownload the app.

  • When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't h

    When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer, [ REMOVED ] So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

    Please remove the S/N immediately (I can't or would). Never post them online. As for download you can go to http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html on the right panel to get 9 pro. I am not sure there is a MAC version there, but that is the first place to go. If it is the proper version, then please back it up to CD and/or portable HD, not the system HD.

  • Allow this application to be installed from the install software task sequence action without being deployed

    What functionality does this setting enable when checked?  The only thing I find in product documentation (CM2012_Web.chm, 2/1/2014) states:
    For applications to be installed by using a dynamic variable list, the following setting must be enabled on the
    General tab of the application’s Properties dialog box:
    Allow this application to be installed from the Install Application task sequence action instead of deploying manually
    Note - My ConfigMgr 2012 R2 CU1 Application Properties now displays a tab labeled "General Information".  I do not find one labeled "General".  The configuration setting also reads "Allow this application to be installed
    from the install software task sequence action without being deployed" instead of "Allow this application to be installed from the Install Application task sequence action instead of deploying manually"
    Is application installation using a dynamic variable list the only time this configuration setting is used and functions?

    Yes, you only have to check that when using the dynamic variable list(s).
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for

  • My "Owners" is turned off - now I can't access my disk!

    Hello, I recently installed Leopard (10.5.8). While working in it I had an external USB drive attached. For some reason things went hay-wire in my computer and I was suddenly unable to access any drives on the computer, they were all locked. Their ic

  • Cannot hear any sound from WMP, youtube, or any other videos

    I use a Vista SP2 HP Pavilion dv6 laptop.  Yesterday suddenly, all sound died on me.  The previous day, I had downloaded flash videos from a website called www.auditchannel.tv (this is a website run by the Institute of Internal Auditors, a global org

  • "Can't use this version of iChat...

    ...with this version of OS X" is the message I get when trying to launch iChat from my MacBook. Works fine on my iMac. Recently downloaded Leopard to both computers. Any suggestions?

  • Can't open files off of server in Yosemite and CC.

    We recently upgraded our team computers to Yosemite.  They are all iMac 27".   We also installed CC apps after the upgrade.  Now anytime we try and open a file that is stored on our team server we get error messages regarding filetype being unopenabl

  • Sequence into table

    Hi all. Meet again with mr junior I want to control 5 servos by sliders for each. Can anybody show me how: -to put an array of data for the valuethat I control into a table. Every column show value (of degree) for each servo -every row is the sequenc