Fix Pacl 1.3 - Does it solve the mouse over HAND Symbol issue?

The new Fix pack was out and it was supposed to solve the Hand Symbol instead of arrow when we move the mouse over a URL button.
I have gone through the documenation but din't find any solution for this. When will the next fix pack be released and will it solve the issue? our users are not happy about this.

The documentation says it fixed. Look at the first item on page 5 of the PDF.

Similar Messages

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, the icons don't wiggle anymore.

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, when I double-click the start button, my open app icons display. But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close. Any advice... thanks?!

Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

I need to know if it's 64-bit or 32-bit.
If it's 64-bit, try copying the mms.cfg file from C:\WINDOWS\syswow64\Macromed\Flash to C:\WINDOWS\system32\Macromed\Flash

I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks

HT1202 It simply does not solve the problem.

It simply does not solve the problem:
When I set/check "manually mange" on the primary iTunes (OS X 10.6), it is not selected/checked, when connecting to my iTunes on Windows.
It works as proposed with my new iPad, but not with the iPhone. There, I will still be asked to erease all my data.

Yes, indeed; the reason is the last sentence in the post by apple:
iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
Brilliant Apple... truly brillant... why are you doing this only for iPod and iPad but not for the most mobile device ?????? I just don't get this policy but it never ceases to amaze me

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

Does anyone get the mouse lag with an external display connected via the display port?

does anyone get the mouse lag with an external display connected via the display port?

You don't describe the problem in great detail. Is this the issue you are describing?
https://discussions.apple.com/thread/4398076?start=0&tstart=0
If so, then, "Yes." I have the same problem. Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
Andrew

Spotlight does not show the path or location of a file anymore when hovering with the mouse over the file

in Leopard Spotlight used to show you the path /location of a file when you stayed with the mouse over the result. As sometimes I just look for the location of a file not to open it like a mp3 file. It would be nice to have a opiton in spotlight to contorl or right click a file and then give the option to say show in finder. that only works when you have your results show up in finder first and takes a bit longer. or maybe in the new prieview window to show the loaation or give you opitons what to do with the file
Just an idea to spotlight even better

When you hover over a file in spotlight list (or select with up/down arrow) you can also hit command-R to open the folder where the file is located. Kind of like 'Show Original' for aliases.
But yeah, Apple really needs to just show the directory path on the hover pop-up by default. Obviously, when you do a search you'll most likely get several files with the same name - we need to see the locations to tell them apart. One of the main reasons to do a file search is to simply find out 'where the file is located' - not necessarily open the file. Seems pretty shortsighted to not show the file location in the search result.

One more nugget: Chart zoom with the "Mouse Over" effect

Hello all.
Just read my signature first, it might explain a lot. I do not intend to compete with Darren and I don't think this "nugget" (at least it supposed to be one) will amaze any of the LV veterans and this forum is rich of them. But maybe it will bring some new ideas to some of you or maybe it will be useful for some LV beginners (like me). It is very likely, my code will have some lapses, but please be gentle pointing that out to me. If you feel a need, you can always optimize the code and develope it further. Just don't forget to share!
So back to the point.
I am developing a project using LV. In my program there is a waveform chart which has to show 4 plots. Depending on the length of the X Scale, it sometimes gets hard to see the plots clearly because of their density.So I decided that I need a tool, which would zoom the chart in. And this is what I have came up with after a few "Google" searches to check which part of the bike is already invented and also a bit of programming by myself.
Maybe you guys (at least the veterans) know the BetterVIEW Consulting LV example where they have implemented the Mouse Over effect. So a part of their example has been used in this tool and part of the credit must go to them. I thank them a lot
This tool uses a cluster and its property of visibility to show/hide the cluster depending on if the current position of the mouse cursor is in the desired range or not. The program also gets the image of the chart and returns the subset of the image. The subset is taken for the area arounf the mouse cursor. So if you move the mouse, the zoomed in area will also chage in response. After that, the subset of the image is zoomed in for better view.
The user might chage the zoom factor during the execution. Also it is possible to turn the zoom option On or Off if you don't wish to see it for the moment.
This is how the front panel looks like:
And this is the image of the block diagram (see the attached files for the vi, the VI Snippet tool distorts the code too much, so I haven't added it):
I haven't found anything the same in the forum. Yet I'm a newbie here and I don't have that much experience surfing it. If it wouldn't be something new (in the forum, not necessarily to some of you personally), just ignore the thread. I hope this was worth your time and your attention.
Good coding
Message Edited by Giedrius.S on 02-11-2010 12:46 PM
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect
Attachments:
Zoom.vi ‏198 KB
Mouse_pos.vi ‏20 KB
Check_pos.vi ‏18 KB

Very nice Giedrius.
It takes guts to "step up to the chalk board" so I will do what i can to give you some ideas to think about. This is similar to the type of feedback I offer durring our in-house code reviews.
1) The floating property nodes outside the loop are not sequenced by wires so they could execute after the loop starts. Sometimes this could cause weird errors. Seq with the error cluster.
2) Property nodes can be re-sized so you can apply more than one property setting in the same call. Property node have to execute in the UI thread (which is single threaded) so using a single nodes will force a single context switch rather than one for each.
3) Setting the same property repeatedly in a loop just burns CPU. THe Scale min for both X an Y can be moved outside the loop ?
4) THe Wait Until Next ms" function does not get used in any of my code. It is not a way to get a fixed wait but rather a random wait. If you code completes 1 ms after the next multiple, the delay is double less 1 ms. If you have multiple loops using them and it f the delay for each are not unique prime numbers, then the "Wait until next ms multiple" is a good (cough cough) way of getting them all to wake up at the same time and fight for the CPU.
5)An Event Struture to monitor mouse enter/leave and mouse move (this would have to be a sepearte loop) is easier on the CPU than polling.
6) Is that math in the case to handle the Chart position on the FP? If so then using the property nodes for the chart to find its postion will let you code adapt to GUI changes.
7) Right to left wires are not well recieved.
8) A Bundle by Name is prefered over a "Bundle" since it is self documenting. I know the Picture function so I can see that is the rectangle you are specifying but reader not famliar with that function would not be able to "READ" the code without poking at it.
9) THe event structure would also help with setting the Zoom factor. Only poke it when you have to.
That is all that comes to mind at the moment.
Again thank you!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Computer freezes when I'm moving the mouse over flash videos

Hello,
Sometimes when I move the mouse over a flash video to pause it or to even start it, my computer completely freezes. I'm using a laptop and the LED that lights up whenever the HD is being used completely stops lighting, indicating that the hard drive is no longer being used.
All buttons stop working, including combinations like CTRL + ALT + Delete. The Caps Lock LED does not light up when pressing Caps Lock, and my mouse completely stops moving. All I'm left up is with a frozen image, and the only way to stop the computer is by pressing and holding the stop button on the laptop.
When I restart the computer, the websites and tabs restore on the next Firefox start-up.
I thought this only happened to YouTube videos, but now I've experienced it with another type of video.
This only happens in Firefox and with flash videos. Does anybody know how I can fix this?
Thanks!

Hello, thank you for the response.
I could try that, but the thing is, this only happens rarely. I don't know if there is any way to deliberately cause this, but freezing the computer is not the most pleasant thing, because it requires closing it by using the physical button on the computer, rather than the Windows Shutdown command.

Does Flash Engine supports "Mouse Over" events on an Android device with a mouse?

We built our custome Android on a Beagle Board. When we play a Flash content on WebKit, the flash does not respond to mouse over events.
When mouse pointer comes on an object with mouse over effect, nothing happends.
Can you confirm that there is Mouse Over support in Android 2.2 Flash Engine?
Thanks in Advance

Thanks for the link. Im just stuck on one issue right now. I
quickly noticed that the samples make use of mx.transitions.easing
as seen in the script below. How does Flash 8 address this?
myButton_btn.onRelease = function() {
tweenBall(mx.transitions.easing.Bounce.easeOut);
function tweenBall(easeType) {
var begin = 20;
var end = 380;
var time = 20;
var mc = ball_mc;
ballTween = new mx.transitions.Tween(mc, "_x", easeType,
begin, end, time);

The "text in a yellow box" that appears when I hover the mouse over a selection or help tag.

The "help tag" (Or in most cases the unwanted tag) often is in the way of what I want to look at.
This is especially true when you are looking at an item that has it's own pop up giving you a description or information.
When you hold the mouse over say.... a movie icon in XFinity, the icon of the movie expands and gives a brief synopsis, date and actors of said movie.
Unfortunately, I cannot read the synopsis for the "Help Tag" blocks all the content forcing you to try different ways of pointing to the movie icon so you can read parts of the discretion from every angle of approach then piece it altogether in your mind.
I DO NOT want "help tag". It is extremely annoying and time consuming ergo it des not "help" it hinders.
Can it not be disabled (Like balloon help in OS 9) so you do not have to feel anger and frustration every time you see that yellow tag?

Ooo, I did not notice the article was from 2007. Thansk for pointing that out. I don't think I am going to try it. It seems that with all the "little" apps the seem to keep growing in numbers, someone will come up with a solid program that would wok through system prefs. I would pay the normal $20.00 for an app like that.

How do I change the mouse-over value format on the secondary axis?

Can anyone tell me how I can change the number format for the mouse-over values on the secondary axis of a combination chart? Right now they take on the format of the primary axis values. In my case, I need the primary to reflect a general number with three decimals, and the secondary to reflect currency.
Many thanks,
Devin

Agreed. The option I've used before is to name the axes "Revenue ($)" and "Gross Margin (%)" (or whatever) and that makes the numbers a little more readable.

Individual Panels "Jump" when moving the mouse over

I am using AE CS2. When I move the mouse over individual panels, the panels "jump". They don't change to a new location, they just jump once in place as if they have been bumped. It is quite annoying. What causes this?
Thanks.

Microsoft Intellipoint software is known to cause this issue.

Fix Pacl 1.3 - Does it solve the mouse over HAND Symbol issue?

Similar Messages

Maybe you are looking for