Fix (set in concrete) Bridge Workspace

How do I set a Bridge Workspace so that future alterations don't get saved by default?
Thanks,
Drew

If I select that named workspace, I get the changes regardless of whether I saved them.
You have to reset the workspace again using the triangle menu or right mouse click on workspace name itself.
I'm still trying to find out what I prefer but can't figure it out yet. there is a large number of people wanting to have the last use workspace being sticky for that particular workspace. Sometimes this suites me, sometimes not.
But the reset is something I got used to.

Similar Messages

  • How to set resolutin in bridge??

    it has been suggested that I set my resolution to 300ppi to help reduce im work flow.
    How do i set resolution in bridge??

    You don't set the resolution in Bridge. You either set in in Camera Raw or in Photoshop.
    In Camera Raw, edit the 'workspace settings' by clicking on the underlined settings at the bottom of the window and change the appropriate settings.
    In Photoshop, change Image Size (Ctrl-Alt-I), untick Resample Image, and change the PPI value.

  • Bridge Help | The Adobe Bridge workspace

    This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/adobe-bridge-workspace.html

    For reinforcement, a basic tutorial video on setting favorites and image ratings can be found on the InfiniteSkills blog: http://infiniteskills.com/blog/2012/08/adobe-photoshop-cs6-tutorial-favorites-and-ratings- in-bridge/

  • Need downlowad for Output on Bridge Workspace switcher

    Need to know how to download Output on Bridge Workspace switcher.

    Thanks for your input. I will wait until Adobe fixes things but until then I have gone to Acrobat and it will do what I want in a different and less effective way. Time wasted by me on this show stopper problem is about 20 hours. Thanks for nothing Adobe. HLower

  • I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

    I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

    Any warnings when opening the file?
    You might need to reset all warnings in preferences.
    Apart from that itlooks like your color management settings are set to convert into profile. This is absolutely not advisable.

  • Setting up a bridge for solaris 10

    Hi,
    I currently have a dual boot for on my desktop (Solaris 10 and WinXP). I'm currently looking for a way to get online while in solaris, my WinXP install is on a wireless network but it's almost impossible to find wireless drivers for solaris so i'm trying to use my ethernet capabilities.
    I bought a wireless print server which has a bridge feature and i'm hoping to find some information on how to setup a bridge on my solaris install.
    Any help or direction will help me a lot since I'm very new to solaris. Thank you in advanced.

    I have a similar issue but have not been able to get this solution to work.
    I have an Airport Extreme 802.11n that is set up in bridge mode and connected to a DSL modem that assigns IP addresses.
    I wish to use a remote Airport Express (late 2008) 802.11n to connect via ethernet to a PowerMac without wireless.
    In summary I desire: DSL-ethernet-AirportExtreme-wireless-AirportExpress-ethernet-PowerMac
    I have reset the Airport Express to factory defaults and then set to "Join wireless network" and checked allow Ethernet clients. The Airport Express gets an IP address but any number of Macs I have tried will not get an IP address in DHCP mode (except a self-assigned one). I have verified that the cable works: when I connect the Macs to the Airport Extreme base station, they all get an IP address. All versions of firmware are 7.4.1. I have also tried checking and unchecking "Allow this network to be extended" on the Airport Extreme.
    Please help. Thanks

  • Airport Extreme needs to be set-up in "Bridge mode" ??

    I am trying to set-up a new intel iMac to a dsl service for my elderly uncle. The dsl people said that their system was compatable with OS 10.4.7 (which is installed) but that the Airport Extreme modem will need to be set-up in "bridge-mode." Can I do that? Where can I find instructions or help with that? When I queried "bridge mode" on this site I get lots of stuff with acronyms I don't understand and stuff about routers and wireless bridges and other stuff I don't understand... I really need help!
    Flat-panel iMac, G4 tower   Mac OS X (10.4)   Setting up intel iMac
    Flat-panel iMac, G4 tower   Mac OS X (10.4)  

    Hi Buzz0432,
    I think, "yes" - and i think i saw it in the booklet which you get with the AE. However, i'm slightly unsure about this at this instant since i'm not at home where my mac-stuff is.
    i'll check on it and will report back lateron...
    thomas

  • I have FIOS and the latest version of the Airport Extreme Basestation set up in bridge mode.

    OK need some technical answers I have FIOS and am forced to use their Router. I have WiFi turned off on the FIOS router and my New version Airport Exteme Basestation set up in Bridge Mode. I have CAD 5 running to all my Mac computers and a CAD 5 up to the second floor. I have an older version Airport Extreme Basestation that I would like to connect to the CAD 5 cable on the second floor where the WiFi signal is weak as the main Airport is in the basement. How would I connect the second Airport to the Airport that is in Bridge Mode?  Will this setup mess up my signal strength on either CAD 5 or WiFi? I will also have one Macbook Pro plugged into the upstairs Airport. This is mainly for the WiFi for my iPad and iPhone. Details will help. Thanks.

    How would I connect the second Airport to the Airport that is in Bridge Mode?
    Connect from a LAN <-> port on the Bridge Mode AirPort to the WAN "O" port on the second floor AirPort and then use AirPort Utility on a Mac or iPad to set things up.
    Will this setup mess up my signal strength on either CAD 5 or WiFi?
    Nothing will be messed up, and you will have a much stronger WiFi signal upstairs.
    If you need more details on setup.....we need to know.....
    1) What model number of AirPort Extreme will be upstairs.  The model number is usually embedded in the foam base on the bottom of the device. Starts with an "A" followed by four numbers. Example.....A1143.
    2) What operating system you are using on your Mac, or whether you want to use the iPad for the setup...assuming that the upstairs AirPort is compatible.

  • Can I fix(set) the distorted object?

    I received a object to my client.
    It's distorted by 'Free Distort' effect in illustrator.
    I want distort path and all.
    = I want distort object irrevocably.
    Because of my plotter(big printer) cannot cognize distorted object.
    When i print distorted object, it's printing as NOT distorted object.
    How can I fix(set) the distorted object?
    help me please. :-)

    Thank you so much. it's working

  • Does editing a pre-fix set for bgp in IOS-XR cause a loss of network connectivity

    Hi,
    I have to edit an existing prefix-set for bpg in ios-xr.  When I went to do it the first time it told me it would wipe the existing information so I aborted the change.
    I have since read that you need to redo the whole list and add the new network you want.
    For example.
    existing
    pre-fix set TEST
    10.10.10.0/24,
    11.11.11.0/24
    new
    pre-fix set TEST
    10.10.10.0/24, 11.11.11.0/24, 12.12.12.0/24
    1st) is the above correct?
    2nd) when this is done will there be any drops in connectivity?
    Thank you.

    1) It is correct, when you create the new prefix-set with the same name as the old one, it overwrites the old one. Meaning that, it wont "append" to the old config, it creates a new prefix-set from scratch
    2) Depends on where are you referencing the prefix-set. For example, on BGP route-policy, there wont be any drop on BGP connectivity, you might even have to do a soft refresh in and out to refresh the advertised/filtered routes

  • My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    You have two devices....the Netgear and Time Capsule both configured to act as routers on the network. You only want one device providing this service.
    I suggest that you configure the Time Capsule in Bridge Mode as suggested to eliminate the Double NAT error. Unfortunately, the Guest Network cannot be enabled in this setting.
    No other adjustments are needed and everything else will operate normally...and the Time Capsule will still be providing your wireless network signal.
    Once the Time Capsule is configured in Bridge Mode, it would be an excellent idea to perform a complete power cycle on the network to allow things to reset properly.
    Just power off all devices on the network in any order that you want
    Wait a minute
    Start the Netgear device first, and let it run a minute by itself
    Start the Time Capsule next the same way
    Continue starting devices one at a time the same way until everything is powered backup
    The other option you have is to "ignore" the error and the light will turn green. The Double NAT error may...or may not cause some issues for you down the line. The next time that you update the Mac operating system, or update the firmware in the Time Capsule, it may likely change the Time Capsule to Bridge Mode automatically.
    If your Guest Network "disappears", you will know why this happened, and you will have to manually configure the Time Capsule again in Router Mode to provide DHCP and NAT services.
    Double NAT can also cause a slow down of web page loading. You may...or may not....notice this.

  • Exporting Bridge workspace

    I want to export a Bridge workspace and then import it into Creative Cloud and share across all the seats I am administrating.  Can someone help?  I can't seem to figure this out.

    Hi Ben,
    I don't think there is built in functionality for this currently, so I think the only option would be to manually copy the workspace files between systems.
    The file should be saved in the following locations. I'd only transfer it between the same version of Bridge and OS and with Bridge closed.
    In Windows, WORKSPACE files are saved to the following directory:
    [user]\Application Data\Adobe\Bridge CS[#] \Workspaces\
    In Mac OS X, they are saved to the following directory:
    [user]/Library/Application Support/Adobe/Bridge/Workspaces/
    Win 7 for example
    C:\Users\<user name>\AppData\Roaming\Adobe\Bridge #\Workspaces
    These are the Creative Cloud apps that support syncing settings currently:
    http://helpx.adobe.com/creative-cloud/help/sync-settings.html
    Hope that helps,
    -Dave

  • How can I set up Thunderbolt Bridge?

    Hi all
    I'm trying to set up Thunderbolt Bridge to network my MacBook Pro and Mac Mini (both running Mavericks), in Network it says the Thunderbolt 1 is inactive. Could anybody take me through the steps to set this up?
    Thanks in advance
    Darren

    Hi,
    Thiese articles may help to clarify things:
    Strain Gauge Configuration Types
    What Are NI-DAQmx Custom Scales, and How Do I Use Them?
    Best Regards,
    T Simon
    National Instruments
    Applications Engineer
    Certified LabVIEW Developer - Certified TestStand Architect

  • How do I set up Full Bridge Mode for port fowarding?

    How do i go about setting up Full bridge mode, for port forwarding on my Airport extreme's ? I Have two working to get coverage in my house, but I guess they need to be bridged together

    For most routers, including the AirPorts, bridge mode disables both the NAT & DHCP services. Since NAT is disabled, all of the firewall ports on the AirPort are open and thus port mapping/forwarding would not be reqiured. Therefore if you configure your AirPort as a bridge, the port mapping optios will not be available.
    Since you have two AirPort routers, you would only need to configure the AirPort that is NOT in bridge mode for port mapping to allow communicaton coming in from the Internet. This would typically be the AirPort attached directly to the Internet.

  • [svn:fx-trunk] 11627: Fix setting luminosity masks on graphic elements - missed an occurence where setting cacheAsBitmap to true was needed .

    Revision: 11627
    Author:   [email protected]
    Date:     2009-11-10 14:01:01 -0800 (Tue, 10 Nov 2009)
    Log Message:
    Fix setting luminosity masks on graphic elements - missed an occurence where setting cacheAsBitmap to true was needed.
    QE notes: Regress
    Doc notes: No
    Bugs: http://bugs.adobe.com/jira/browse/SDK-24089
    Reviewer: Pete
    Tests run: All FXG (static and runtime) tests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24089
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

    FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Maybe you are looking for