FIX SLIDE SHOW FREEZE (auto play / loop) IWEB 09

IWEB 09
I Dropped a still shot slide show quicktime video onto my home pg. I used inspector to remove the play menue bar tab and then selected the video to AUTO PLAY and LOOP
When you go to the site everything is fine until your mouse curser crosses over the video and you simultaneously scroll down... it freezes the video and unless your smart enough to double click on the video to start play again it will just freez up.
Why is this happeneing? how do we avoid this? the whole purpose to dropping a video on your pg and having it run in auto play and loop is to be hands free and allow playback while you navigate... it shouldn't freeze up like that
anyone ever have this issue? know how to fix it?
Would very much appreciate your help
go to www.flatironfinishes.com you will see what I am talking about
Thank you!!

yeah you bring up a good point, I think as I was reading tutorial on how to upload audio and auto play/loop it I added it to the pg. and then took the company logo and pasted over that audio box...... later I wtched tutarial on uploading a quicktimes video and auto playing / looping
Yeah I am not to savy on codes and website building.... but can go back into IMOVIE and add in the audio to the movie file and have only one file...
Thank you for pointing that out.
now the html snippet is not recognizig the folder and file in my FTP files?? so the quicktime icon is showing.
So lets say I combine the audio and the video and then drag n drop it into the home pg. as originally done...
If it continues to freeze when you move the cursure over the video and scroll down..... what would I do?
moving the curser over the video does nothing its the combonation of scroilling down and having the curser over the video that it freezes up??
appreciate you guys walking e through this
S
I am getting closer... I think?

Similar Messages

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music!

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music, it's all gone!
Problem seems to have started after updating to Mavericks.
Is there a box I need to check/uncheck?
Any help very welcome!

Hopefully you've seen the post from Terence Devlin? I've pasted it below.
In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Pity Apple didn't either warn us or set up a bug fix!

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I would also like to know the answer to this. I am having the exact same problem.

Can i ad a slide show to my sites using iWeb 1.1.2?

Can i ad a slide show to my sites using iWeb 1.1.2?

Then you use the HTML Widget to display the slideshow :
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
http://www.wyodor.net/_Demo/MyHouse/Huis.html

2nd slide show won't play

After creating a dvd with two slide shows using iDVD, the second slide show will not play past the first image. The first show plays with no problem.
When the second show is activated the first image comes up but I can't advance to any of the others.
It isn't frozen as I can return to the main menu and can still activate the first show.
I've tested on 3 different DVD players with the same result
The theme is the basic green linen with the theme graphic and drop zone replaced by a plain black background and two slideshow buttons.
Both slide shows are set to manual advance, fade through black and no audio or video. The images were imported directly from iPhoto. The first has 82 images the second 42 (combination of jpeg and tiff files).
I've replaced all of the images with different files from other shoots but still get the same result. I've also recreated the project from scratch twice to no avail.
Any suggestions? Anyone else run into this?
Thanks!

I have experienced totally similar circumstances. My husband thought that I had posted your email. I have gone beyond pulling my hair out.....
I traveled 1500 miles this summer to scan 1000 old family black and white photos and slides. I am composing an idvd production using 500 slides that I have brought in from iphoto. Before placing in iphoto, I took all of them through Photoshop and placed a title on each photo. My idvd is composed of 6 slideshows, each ranging between 50 - 98 photos. After burning, they all play back on my ibook, although they have been burned on my standing machine. Playing them on a tv DVD, one particular slide show will not advance. It stays on the first photo. It will not advance, ever. I am using the Memories theme from 5.0, manual advance, and page flip. (I have tried several other transition options) I have burned a minimum of 20 DVDs with the same outcome. I have tried eliminating photos, using folders, I have made every adjustment that I can think of. I narrowed it down to 2 photos that caused slide shows to not open, and then after I eliminated them from the DVD, that very same slide show still will not advance. I have made sure all existing programs were turned off, and that I have file share off....
My super drive uses a Pioneer DVD-RW DVR-104
Up until this year, all DVD slide shows ran without a hitch. Whether I use Apple DVD's or Memorex, I get the same problems. I have spent alot of money on this DVD and seems that I should have a result. I'm afraid to upgrade to TIGER. My family is waiting for their copies.
Any suggestions for me???????
This is my first posting and am not familiar with how it goes, but am hoping that we can solve our problems!

Audio in PDF slide show doesn't play. What can I do ?

I created a PDF slide show with MP3 audio (from Elements Organizer version 10.0). The PDF doesn't play the audio. What can I do ?

Hello Andaleeb,
thank you for getting back to me.
The slide show works fine, including sound, from within Organizer. It
also works fine when I export it as a video. Just PDF isn't working.
In the meantime, from various contributions in the forum, I gather that,
unfortunately, the Organizer (just like Lightroom) simply does not
support adding music to PDF slide shows. Apparently, there is a way to
do that using Acrobat Pro (only costs 640 Euros).
You may consider my question answered.
Regards,
Thomas
Am 21.12.2012 11:02, schrieb andaleebfatima1:
>
Re: Audio in PDF slide show doesn't play. What can I do ?
created by andaleebfatima1
<http://forums.adobe.com/people/andaleebfatima1> in /Photoshop
Elements/ - View the full discussion
<http://forums.adobe.com/message/4938671#4938671

DVD Slide shows only auto-cycle 100 slides; then aborts. What's the fix??

I burned 2800 jpeg Photos from my IMac onto a DVD using iDVD and set it up for auto-play, so that the 2800-frame slide show would autostart running and advance to a new photo every 3 seconds as soon as loaded into the DVD player in our TV room.
On my Panasonic DVD player, however, I can only view the first 100 or so slides automatically before the show aborts and the player defaults back to its home screen as if it had completed the slide show.
Why will my DVD player only show the first 100 of 2800 slides on the DVD before quitting ? Is it a limitation of the DVD player hardware or software or have I misconfigured iDVD ?
If I want to view all 2800 slides on the DVD, I can do so only by holding down the forward and reverse buttons on the player's remote control to jump forward or backward to the next or previous slides. Only then will it display beyond the first 100 or so slides and run to the end. In auto advance mode, it chokes after the first 100 frames and quits on me.
As long as I manually advance to the next frame, I am fine...but the player-DVD combination will only auto-advance the first 100 before the player hardware/software crashes.
Any ideas how to fix ????
Intel Imac 2.1 GHz - 20" Mac OS X (10.4.8) 1 Gb RAM

Thanks. This is very clumsy to work around but maybe the just released Toast 8 has a workaround that iDvd does not. Trick is I guess to get 28 tracks onto a single DVD - each with 99 (slides) chapters. Is this doable ??
Surely there is a simple way to copy 2800 files - maybe just a simple file copy, onto a blank CD or DVD and have a CD/DVD player`read them and auto advance.
This is very frustrating because these sophisticated software programs are good at doing fancy things with movies but can't produce a simple slide show with more than 99 frames.
Michael,
The basic problem is iDVD treats slides in a
slideshow as chapters and a DVD track is limited to
99 chapters per track. Prior to iDVD 6, slideshows
were limited to 99 slides. iDVD 6 added a 'fix' to
allow several such slideshow tracks to be linked
together. HOWEVER, not all DVD players (as you have
found) want to recognize the linking and will quit
(or drop the audio) after the 99th slide.
Any ideas how to fix ????
There is nothing you can do in iDVD to change this.
There are some DVD players that will play through
all he images - you can take you DVD to a 'big-box'
store with a lot of DVD players on display and see
if you can find a player that will play all the
slides.
OR
You can create your slideshow as a movie in iMove,
although your 2800 slides at 3 seconds per slide
would create a movie that is 140 minutes long, and
this exceeds the 120 minute limit of what can be put
on a single layer DVD with iDVD.
F Shippey

Pictures in iDVD slide show keep auto adjusting

Hi,
I'm knew to iDVD. I am a professional photographer and prior to iDVD used another piece of software to create DVD slideshows.
I created my first iDVD slide show, and encountered a weird issue. The only transition I'm using is a dissolve; it seems that at the time the slide show was being rendered, images were somehow being "auto adjusted" for exposure. The images come on the TV, then they automatically adjust for exposure; iDVD attempts to make lighter images dark and darker images lighter. It is annoying. Anyone know how to turn this "auto exposure" adjustment off?
I looked everywhere for help on this issue: I.E. turn off "auto adjust", but to no avail.

Hi,
Thanks for the reply...
Question: How do I turn on or turn off "auto adjust?"
I didn't quit and then restart...
The images are on the higher res side.
but again, where is the "auto adjust" setting located?
Michael

Slide show does not Play Images Worked on in CS2- 2nd post

I routinely work on Aperture images with CS2...using the external editor command. When I try to play a slideshow with these "worked on" images the Aperture slide show just reverts to the original Aperture Master. Thus I am unable to show the CS2 versions...Is this just a bug?
g5 dual 2.3 late model Mac OS X (10.4.8) 3.5 gig memory...

Have you made the CS2 version the stack pick?
Also, helpful to generate Previews before Slideshow (revised at v1.5 to use them rather than creating an image on-the-fly) so that slideshow doesn't stutter.
G.

Slide show does not Play Images Worked on in CS2

I routinely work on Aperture images with CS2...using the external editor command. When I try to play a slideshow with these "worked on" images the Aperture slide show just reverts to the original Aperture Master. Thus I am unable to show the CS2 versions...Is this just a bug?
g5 dual 2.3 late model Mac OS X (10.4.8) 3.5 gig memory...

I have the same problem. I have many architectural shots that I adjusted using Perspective or Skew in CS 2 and the changes don't show up in a slide show. I have marked each CS 2 modified shot as a pick in the main library and as an album pick in the album, all to no avail.
iMac G5 Mac OS X (10.4.8) 1.5 GB RAM

Completed a slide show - won't play the audio

I have completed a slide show and added 3 songs. The songs are showing up on the audio bar at the bottom, but when I do full-screen preview there is no audio. My speakers are working fine, i'm able to play songs from other programs. I am working in PS Elements 9 on Windows 7.
And another question, if i want to burn the slide show onto a DVD - what type should I buy?
Thank you.

1 - I suggest that you post information about the format of the music files that you are using in this slide show. Also include whether these files have any album art (which has been known to create problems within the slideshow process).
And I wonder - did you import these music files to the Elements Organizer and if yes, can you play each of these music files from within the Organizer ?? If not, try importing one music file which will not play in the slideshow preview to the Organizer then attempt to play it within the Organizer. (why - sometimes playing a music file from within the Organizer is a good indication of whether the slide show editor can use this music file)
2 - You are asking about burning a slideshow to a DVD - I suspect that you want to burn your slideshow to a DVD that will play in your TV DVD player and Photoshop Elements does not supp[ort the function of creating this type of TV playable DVD. Adobe Premiere Elements is a separate video software product which does support creating TV DVD player DVDs. However, I suggest that you read my next point before purchasing Adobe Premiere Elements - because there is a simpler process you can try now.
3 - your Windows 7 software license provides a program of Windows DVD Maker which can be used to create a TV playable video DVD format.
Using Windows DVD Maker with the PSE slide show editor is a 2 step process -
- First, create a WMV file output (standard definition 640 x 480) from the PSE slideshow editor:
- Second, use that .wmv file (which you saved on your computer hard drive) as input to the MS Windows DVD Maker software.
4- Both for troubleshooting and for future potential use with Windows DVD Maker, I suggest that within the PSE Slideshow Editor you do the Output command to create a .wmv file (640 x 480 standard definition), give it a name and save it on your hard drive. Then attempt to play that .wmv file using Windows Media Player. Do you hear the music with playback from Windows Media Player ?

Slide Show Freezes after latest Apple Security Update

Since installing the latest security update to 10.4.6 from Apple, initiating Slide Show causes iPhoto to freeze on my 2 Powerbooks and iBook 500. The only way to get out of it is to Force Quit iPhoto. This happens with iPhoto 4.0.3 and with 2.0. Before the update, the slideshows worked fine. This happens on all slideshows and is not music specific (other music does the same thing).
Any ideas?

If you think it has something to do with system software, create a new user account, log into it, and load some pictures into the new iPhoto Library there. See if you can reproduce the problem. If you can't, then the problem has nothing to do with the security update, but rather something in the original user space.

SWF slide show does not play

I need some help with a Fireworks swf slide show.
This is the web page:
http://www.shortlifeweb.com/DrTedScott/index1.html
And here is a hard link to the slide show:
http://www.shortlifeweb.com/DrTedScott/images/slideshow.swf
The slideshow.swf works fine, so I think the files and swf
are properly located.
However, in the index1.html, the slideshow does not play.
Any help would be appreciated.
Ken.

To make things simple, I created a blank page - no template,
no formatting. And it still does not play.
According to some of the tutorials I have seen, the slide
show should play within Dreamweaver, but it doesn't play there
either.
Thanks.
http://www.shortlifeweb.com/DrTedScott/slideshow_test.html
I am including the entire html code.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550"
height="400" id="FlashID" title="showing_photos">
<param name="movie" value="images/slideshow.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />


<object type="application/x-shockwave-flash"
data="images/slideshow.swf" width="550" height="400">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />

<div>
<h4>Content on this page requires a newer version of
Adobe Flash Player.</h4>
<p><a href="
http://www.adobe.com/go/getflashplayer"><img
src="
http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"
alt="Get Adobe Flash player" width="112" height="33"
/></a></p>
</div>

</object>

</object>
<script type="text/javascript">

</script>
</body>
</html>

How to make a slide show that will play on a TV?

I have a
collection of pics that I have used the slideshow module t
o create a slide show and it works great on my PC. How do
I create one that I can burn to a disk and play on a TV?
Do I need to purchase
something else or will Lightroom3 do what I need? The slideshow that I created will play on other computers but, when I put it in a dvd player for the TV it says there is no disk in it. I have tried 4 different players. Am I missing something?
I would be very gratefull for help with this!

Alternatively, you can export a H264 mp4 from the slideshow module, dump it on a memory stick (or plain DVD) and stick it in the TV or your BluRay player
Not all Blu-ray palyers can play MP4 container video files. So this may, or may not work depending on your Blu-ray player's capabilities. ALL Blu-ray players will play H.264 AVC HD video with .MTS file format, but Lightroom 3 does not offer this as a slideshow export option.
See the 'Overview' section here for more information on the file system and folder organization:
http://en.wikipedia.org/wiki/AVCHD
The folder structure when using USB and SD media is different than DVD media! More information here:
http://multiavchd.deanbg.com/tutorial.php

How can I cause captions to be displayed in a slide show or when playing a DVD of an album?

I want to add captions to images and then cause them to be displayed along with the image when playing a slide show or DVD.

Do you using Premiere elements or Photoshop elements.
In Premiere elements , You can add title in each photo. Press " T" button displaying below the monitor window then edit the text in monitor display.
In Photoshop elemtns , Create a slide show. Select one side, then click the text in right side of the property panel and edit the text in monitor window, Repeat the same steps for all the slides.

FIX SLIDE SHOW FREEZE (auto play / loop) IWEB 09

Similar Messages

Maybe you are looking for