Fix ultra thin line

In acrobat there is a tool to fix ultra thin line.
But it can only FIX all.
Is there anyway to LOCATE it (so that I can correct the file)

Depending on your version of Acrobat, you can try Tools> Print Production> Preflight> Select single checks> Graphic State Properties for Stroke> Line width less than .3 pt.> Analyze.

Similar Messages

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

Take it to an Apple Store or other service provider for testing.

Thin lines in pdf file displayed on mac

Hi,
I don't know if this is the right place to bring this up. So redirection elsewhere is appreciated!
I've noticed a problem with displaying certain pdf files on a mac. The files are 2D filled plots produced by the free scientific software Yorick (http://yorick.sourceforge.net/). It happens when I view it in Preview or Powerpoint on a mac. But not if I use a pdf viewer on a unix system. The yorick source code for a simple example is below. I can't find a way to attach files to this messages or I'd include the pdf's. Is there a way to do this?
Both png's are fine, and the pdf of the pli plot is fine. pli assumes uniform grid spacing, is fast, and must use different graphics primitives than plf, which does not assume uniform grids (i.e. you can have non-square elements). In this case both x and y grids really are uniform. The problem is with the pdf of the plf plot. Look at it in Preview, you should see some thin lines. Put it in powerpoint and the same. If you put some solid colored box in back of it, you'll see the color. So the lines are transparent or something.
David Munro, the creator of Yorick, suggests it's an issue with anti-aliasing.
Anyway, the problem isn't that severe in this example, but in others (which don't have simple source code) it's more annoying.
Either way, any advice on this, or the right people to report this to, is appreciated.
Cheers,
David
// 10dec10: bug of contour plots in pdf's having white lines on mac
x=span(0,3,21);
y=span(-2,2,30);
x2 = x(,-) + 0*y(-,);
y2 = 0*x(,-) + y(-,);
z2 = exp(-x2^2-y2^2);
fma;
palette,"rainbow.gp";
pli, z2, x(1),y(1), x(0),y(0);
cd,"~/yorick/pdf-mac-bug";
pdf,"pdfmacbug_pli.pdf";
png,"pdfmacbug_pli.png";
fma;
palette,"rainbow.gp";
plf, z2, y2,x2,;
cd,"~/yorick/pdf-mac-bug";
pdf,"pdfmacbug_plf.pdf";
png,"pdfmacbug_plf.png", dpi=150;

As I suspected, the problem is that the other viewers are not savvy enough to handle the "stitching problem".
What looks like a single image is really a WHOLE LOT of single squares. I took a snapshot of the Edit Object tool in Acrobat with all the objects selected. See <https://photos-3.dropbox.com/i/o/R6asqv64sEP1Tf7eIEBfNbFbMw0F7qKEaFwfnXQVKLo/1644474/12950 96400/0fa9181>.
As you can see from that, each square is a separate image that needs to be rendered and if the viewer doesn't understand how to proper stitch the pieces together then you will get empty pixels (which appears as white lines).
Either contact the author of the program that authored the document and see about getting that fixed (if it's not you) and/or contact the other viewers about improving their products.

Can't get rid of Thin line at bottom of images

<a href="about.html"><img src="images/HOMEPAGE/homepage_title.png" alt="Get Started" class="columns" title="Get Started"/></a><br>
<br>
Hi, I can't figure out why my homepage images have a thin line at the bottom of the image. The image itself is not causing this but it must have something to do with the image tag or the CSS but I can't seem to get rid of it and it's driving me crazy. If anyone knows what may be causing this I would really appreciate it. Thanks.

adninjastrator wrote:
Looks like ALL your links, including images, have the text-decoration underline and since 3 or the 4 images are links, they are also underlined. Add
text-decoration: none;
to all your achors (a.):
http://www.quackit.com/css/css_hyperlinks.cfm
Best wishes,
Adninjastrator
Adninjastrator, thanks for the link. I looked it over and if I have an image as a link, I don't want there to be a visible link so according to the link here. http://www.quackit.com/css/css_hyperlinks.cfm
I should need to add this code if I don't want a visible link.
a:link { text-decoration: none }
Can you please tell me "where" I would add the above code. The site has 11 styles. What I 've been doing is selecting the image and then looking at the style associated with it and the image seems too use the "clearfix.css" style.. Can you lease tell me if this is correct and where I would add the code to the clearfix style? Thanks.
Here is the code for the "Clearfix" style.
.clearfix:after {
content: ".";
display: block;
clear: both;
visibility: hidden;
line-height: 0;
height: 0;
html[xmlns] .clearfix {
display: block;
* html .clearfix {
height: 1%;
Put this code at the end of your styles (remove the previous one so that it does not interfere with this one) and then post back.
Good luck.
img {
display: block;
Jtanna and Murray, thanks for the reply.
Would I still need that code or would it be better to edit the current code than to just keep adding code? Just curious. Can I not edit the code's text decoration to fix or is your solution better. If you solution is better then would I just add your code to the bottom of the CSS style above? Thanks.

Aipar Air has a thin Line in the screen.

I bought a Ipad air one month ago it was working fine, but the last week appeared a dotted thin line across the screen (vertical), but in this moment there are others thin purple lines. How can i Fix the problem?.

Hello there, NelsonMejia.
The following Knowledge Base article gives us a few recommendations for troubleshooting issues with your display:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
If the issue persists, there are recommendations at the end of the article as well:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Thin lines across screen

My iPhone has thin lines that run vertically across the screen. There are many of them and they are not fixed. I tried turning my phone off and then on, but there is still only a completely white screen with the grey lines. I made an appointment at an apple store, but does anybody know what is wrong with the phone/what the repair will end up being?
Also, is there anything I can do myself to fix this problem?

Standard troubleshooting steps in order are power your iPhone off and on, reset, restore with iTunes from your iPhone's backup, and restore as a new iPhone or not from your iPhone's backup.
This sounds like a hardware problem and if so, your iPhone includes a one year warranty which could not have expired yet. Unless this was caused by accidental damage, more than likely your iPhone will be exchanged under warranty.

Have a black very thin line on the middle of ipad?

My ipad got a very thin line lower middle line,can anyone tell me how to fix it..o what happen to it? Thank you.

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

How to fix the white lines as I save a picture as a PDF?

Hello
I took this picture from the internet, then I used Live trace with colours.
Now when I tried to save as a PDF it looks like this: (You can see all the white lines)
But when I open the PDF again in Illustrator it looks okay. How can I fix this? I use CS3
Thanks in advance

You would have to temporarily reverse what you did and use object >> rasterize then make your pdf.
The problem is how acrobat is displaying this, and it sees all those vector paths, and you have to get rid of those one way or another. Though you can fix things like thin lines that look bold, by removing enhance thin lines, I do not think we can fix your problem in acrobat. Yu can try playing with these acrobat settings though.

Donot want to fix the schedule lines at an Early date even P.O is the creat

Hi ,
If a material is sourced via a Scheduling Agreement, then MRP automatically creates schedule lines for this to meet MRP requirements.
However, if a separate PO is raised for the same material (irrespective of the supplier) at a date after one or more of the scheduling agreement schedule lines, MRP creates a message to reschedule in the PO in front of the schedule lines even if this is known to not be possible. the result is that the schedule lines for standard supply are not put in early enough.
And We don't want to fix the schedule lines in a t an early date to over come this.Is there any settings for the same.

Hello,
If you want to control MRP messages for rescheduling you can make settings in tcode : OMDW either at plant level or MRP group level.
You can introduce Tolerance value forward & Tolerance value for displacemt in No. of days here.
If system finds requiremnts within the tolerance no of days it will not create MRP Exception messages. This way you can avoid unwanted messages.
Thanks,
Ram

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

Whats the easiest way to put a thin line around an image?

Can anyone tell me the easiest way to put a thin line around
an image? I'm also interested in the use of thin lines as part of
the graphic design on a page, how are they generated?
Thanks

.oO(cdeatherage)
>In Dreamweaver, you can set a border for each image but
be aware that some
>versions of some browsers may not display it.
This shouldn't be an issue in any used browser today.
>If it is a consistent look you're
>after, I'd say the most permanent thing to do would be to
edit the image in
>Photoshop or Fireworks. In Photoshop, e.g, I'd create a
background fill with
>the color I wanted the border, then add the image,
centered, in a new layer on
>top of that. Merge the layers, then save optimized for
the web.
Way too complicated. If you want to change the color or style
of the
border, you have to modify the image. With CSS you can
directly change
the line style in a much easier and faster way.
Micha

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

Drawing and some layout help for a simple control: thin lines and application start

I am trying to create a new, simple control. The control should act as a grouping marker much like that found in the Mathematica notebook interface. It is designed to sit to the right of a node and draw a simple bracket. The look of the bracket changes depending on whether the node is logically marked open or closed.
After looking at some blogs and searching, I tried setting the snapToPixels to true in the container holding the marker control as well as the strokewidth but I am still finding that the bracket line is too thick. I am trying to draw a thin line. Also, I am unable to get the layout to work when the test application is first opened. One of the outer brackets is cut-off. I hardcoded some numbers into the skin just to get something to work.
Is there a better way to implement this control?
How can I get the fine line drawn as well as the layout correct at application start?
package org.notebook;
import javafx.beans.property.BooleanProperty;
import javafx.beans.property.IntegerProperty;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.property.SimpleIntegerProperty;
import javafx.scene.control.Control;
* Provide a simple and thin bracket that changes
* it appearance based on whether its closed or open.
public class GroupingMarker extends Control {
private final static String DEFAULT_STYLE_CLASS = "grouping-marker";
private BooleanProperty open;
private IntegerProperty depth;
public BooleanProperty openProperty() { return open; }
public IntegerProperty depthProperty() { return depth; }
public GroupingMarker(boolean open) {
this();
setOpen(open);
public GroupingMarker() {
open = new SimpleBooleanProperty(true);
depth = new SimpleIntegerProperty(0);
getStyleClass().add(DEFAULT_STYLE_CLASS);
// TODO: Change to use CSS directly
setSkin(new GroupingMarkerSkin(this));
public boolean isOpen() {
return open.get();
public void setOpen(boolean flag) {
open.set(flag);
public int getDepth() {
return depth.get();
public void setDepth(int depth) {
this.depth.set(depth);
package org.notebook;
import javafx.scene.Group;
import javafx.scene.paint.Color;
import javafx.scene.shape.FillRule;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
import com.sun.javafx.scene.control.skin.SkinBase;
* The skin draws some simple lines on the right hand side of
* the control. The lines reflect whether the control is considered
* open or closed. Since there is no content, there is no
* content handling code needed.
public class GroupingMarkerSkin extends SkinBase<GroupingMarker, GroupingMarkerBehavior> {
GroupingMarker control;
Color lineColor;
double shelfLength;
double thickness;
private Group lines;
public GroupingMarkerSkin(GroupingMarker control) {
super(control, new GroupingMarkerBehavior(control));
this.control = control;
lineColor = Color.BLUE;
shelfLength = 5.0;
thickness = 1.0;
init();
* Attached listeners to the properties in the control.
protected void init() {
registerChangeListener(control.openProperty(), "OPEN");
registerChangeListener(control.depthProperty(), "DEPTH");
lines = new Group();
repaint();
@Override
protected void handleControlPropertyChanged(String arg0) {
super.handleControlPropertyChanged(arg0);
    @Override public final GroupingMarker getSkinnable() {
        return control;
    @Override public final void dispose() {
    super.dispose();
        control = null;
    @Override
    protected double computePrefHeight(double arg0) {
    System.out.println("ph: " + arg0);
    return super.computePrefHeight(arg0);
    @Override
    protected double computePrefWidth(double arg0) {
    System.out.println("pw: " + arg0);
    return super.computePrefWidth(40.0);
     * Call this if a property changes that affects the visible
     * control.
    public void repaint() {
    requestLayout();
    @Override
    protected void layoutChildren() {
    if(control.getScene() != null) {
    drawLines();
    getChildren().setAll(lines);
    super.layoutChildren();
    protected void drawLines() {
    lines.getChildren().clear();
    System.out.println("bounds local: " + control.getBoundsInLocal());
    System.out.println("bounds parent: " + control.getBoundsInParent());
    System.out.println("bounds layout: " + control.getLayoutBounds());
    System.out.println("pref wxh: " + control.getPrefWidth() + "x" + control.getPrefHeight());
    double width = Math.max(0, 20.0 - 2 * 2.0);
    double height = control.getPrefHeight() - 4.0;
    height = Math.max(0, control.getBoundsInLocal().getHeight()-4.0);
    System.out.println("w: " + width + ", h: " + height);
    double margin = 4.0;
    final Path VERTICAL = new Path();
    VERTICAL.setFillRule(FillRule.EVEN_ODD);
    VERTICAL.getElements().add(new MoveTo(margin, margin)); // start
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, margin)); // top horz line
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, height - margin)); // vert line
    if(control.isOpen()) {
    VERTICAL.getElements().add(new LineTo(margin, height - margin)); // bottom horz line
    } else {
    VERTICAL.getElements().add(new LineTo(margin, height-margin-4.0));
    //VERTICAL.getElements().add(new ClosePath());
    VERTICAL.setStrokeWidth(thickness);
    VERTICAL.setStroke(lineColor);
    lines.getChildren().addAll(VERTICAL);
    lines.setCache(true);
package org.notebook;
import com.sun.javafx.scene.control.behavior.BehaviorBase;
public class GroupingMarkerBehavior extends BehaviorBase<GroupingMarker> {
public GroupingMarkerBehavior(final GroupingMarker control) {
super(control);
package org.notebook;
import javafx.application.Application;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.TextArea;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TestGroupingMarker extends Application {
public static void main(String args[]) {
launch(TestGroupingMarker.class, args);
@Override
public void start(Stage stage) throws Exception {
VBox vbox = new VBox();
BorderPane p = new BorderPane();
VBox first = new VBox();
first.getChildren().add(makeEntry("In[1]=", "my label", 200.0, true));
first.getChildren().add(makeEntry("Out[1]=", "the output!", 200.0, true));
p.setCenter(first);
p.setRight(new GroupingMarker(true));
vbox.getChildren().add(p);
vbox.getChildren().add(makeEntry("In[2]=", "my label 2", 100.0, false));
Scene scene = new Scene(vbox,500,700);
scene.getStylesheets().add(TestGroupingMarker.class.getResource("main.css").toExternalForm());
stage.setScene(scene);
stage.setTitle("GroupingMarker test");
stage.show();
protected Node makeEntry(String io, String text, double height, boolean open) {
BorderPane pane2 = new BorderPane();
pane2.setSnapToPixel(true);
Label label2 = new Label(io);
label2.getStyleClass().add("io-label");
pane2.setLeft(label2);
TextArea area2 = new TextArea(text);
area2.getStyleClass().add("io-content");
area2.setPrefHeight(height);
pane2.setCenter(area2);
GroupingMarker marker2 = new GroupingMarker();
marker2.setOpen(open);
pane2.setRight(marker2);
return pane2;

The test interfaces are already defined for you - the 3rd party session bean remote/local interfaces.
It is pretty trivial to create implementations of those interfaces to return the test data from your XML files.
There are a number of ways to handle the switching, if you have used the service locator pattern, then I would personally slot the logic in to the service locator, to either look up the 3rd party bean or return a POJO test implementation of the interface according to configuration.
Without the service locator, you are forced to do a little more work, you will have to implement your own test session beans to the same interfaces as the 3rd party session beans.
You can then either deploy them instead of the 3rd party beans or you can deploy both the test and the 3rd party beans under different JNDI names,and use ejb-ref tags and allow you to switch between test and real versions by changing the ejb-link value.
Hope this helps.
Bob B.

Fix table header line of Query in default web template WAD 7.0

Dear all,
I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query.
My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
Many thanks in advance for your answer and help!!!
Best regards
Abdel

Hi Dion,
Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested.
Best Regards
Abdel

I have Windows Vista and have tried everything! My Ipod Touch has Malfunctioned and cannot be recognized by Windows or Itunes! When I turn my Ipod on the white apple comes on and the 15 seconds or so after that a thin line comes on the screen above it.

A thin line appears above the logo then the loading sign pops up and then the whole thing freezes! I read somewhere to hold the home button and then plug in the usb will help it be recognized by Itunes or help to restore it! I tried that it didn't work.I tried uninstalling Itunes and then re-installing it. I have the newest version of Itunes and don't know what else is left to do? can someone please help?
Thank you for reading!

Try placing the iPod in recovery mode (I think that is what you were try to do) and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Fix ultra thin line

Similar Messages

Maybe you are looking for